Database Users

windows mobile

help me please and give me a windows mobile 6.1 for G4 Qtek 9100 device.i've searched the xda section for windows mobile 6.1 but i can't decide what is good and what is bad.

Visit This Link
Men visit this link
http://forum.xda-developers.com/showthread.php?t=427328
I can tell you that roms arent good or bad... in every device we have diferent issues believe me... and everyone can said this is good to me but somebody said its the worst one! why?... cause its their points of view... be sure you have everything to upgrade before do it ok?
good luck.

thanks for the link.i have downloaded from there but i only have an nk.nbf.how can i install this.i know i'm a complete n00b.

Dont said that men!
All of the people you can see as a Senior one day we were noobs hahaha
Search on the brushed metal by noonski ROM in post number 82 i have attached A RUU just copy your nk.nbf to the file unzipped and run the RUU xp if it doesnt works run the normal RUU. in this link:
http://forum.xda-developers.com/showthread.php?t=429327&page=9
good luck... are you sure you are hard SPL? apply it... or make a soft SPL

Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?

Mmmmm
CocoSS said:
Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?
Click to expand...
Click to collapse
Its an old rom but if it is of your likely... first read the way to upgrade in G4 section of wizard forum maybe you miss a step...
Good luck the new ERA of Roms are the included Manila 2D in it... so give it a try is most prettier.
Good luck men.

i've choosen this one because i red that it is very stabile and i pretty need this now.i wil try to read more, but more likely tomorrow i'll try to install it

i've tried to install a new rom on my wizard and i got this error: "This update utility cannot be used for your PDA Phone.Please get newer update Update Utility."my phone enters bootload before giving this error.

sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard

Good work
CocoSS said:
sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard
Click to expand...
Click to collapse
Enjoy it men!!!

it seems my rom upgrade haven't solved one of my major problems.The GPRS connection is not working.I'm connecting to the network (Vodafone) but if i want to browse the internet internet explorer says :"The page cannot be found.Check the name and try again".

Most of roms
Most of roms has this kind of prob, cause the ccokers said that is better to conect via WIFI or USB stills a problem... but you can try and try again
One more thing maybe your carrier Configuration have missing something... acharacter... a number a dot..... i dont know men!

what do you mean about "try and try again "...different rom or what ?

Of course!
Of course men! try a new one when you think it doesnt reach what you want.

Is really good -> PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap

Hi there.
I have a P3301 and have been reading a lot of posts os people that has used "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" in Artemis with locked CID.
Can this be possible?
Another question: is really nice to change the original ROM? I get some new features like more speed (without using overclock), and other apps?
Tank you.

tuscho said:
Hi there.
I have a P3301 and have been reading a lot of posts os people that has used "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" in Artemis with locked CID.
Can this be possible?
Another question: is really nice to change the original ROM? I get some new features like more speed (without using overclock), and other apps?
Tank you.
Click to expand...
Click to collapse
i don't know about the first q.
and for the second ... yes it can make your device much better (if not why ppl cook and other flash ROMs )..
like more RAM free and storage

y_bother said:
i don't know about the first q.
and for the second ... yes it can make your device much better (if not why ppl cook and other flash ROMs )..
like more RAM free and storage
Click to expand...
Click to collapse
Well...
I have a P3301... i´ve just buyed it. Wich ROM is more new and recommended for this device?
I was worried about the ROM wich i asked in first post, because the related posts about that, all were posted in 2007...
We are in final of 2008.... and i have a new device... So i wanted a more recent and complete ROM....
Tanks by the help....

well in my opinion and for WWE ROM try the following:
if you want a rom with manila i highly recomend FlyROM (the one in my segniture)
if you want a clean and best performance try the YuE v11.3 ExtraClean.
and there are other ROMs what i did not tried even they look good like gulloms and T.I.R
hope i was helpful
and remeber to CID UNLOCK your device first
CHEERS

Tanks a lot.
My first atempt wiil be the YuE v11.3 ExtraClean, because i wanna focus in performance. I am in middle of a .NET mobile development, and want to have a faster Smartphone to test my apps.
Tanks by reply... Other thing: CID locked devices really must bu unlocked first right? I tried unlocking by downloading a app that i get in this forum, but he doesn´t works in Windows Vista: doesn´t recognize my device during procedures... Windows Vista uses "Sync Center" and not "Active Sync"... does anyone had this problem using Vista?
Regards,
Tuschinski.

yes if you want to flash any ROM except your device original ROM you have to CID UNLOCK first...
and sorry i don't know how to do it in vista
maybe someone knows

In FlyROM, for example: does it updates just OS, or another features like radio, etc...?

no it doesn't the spl will remain .11 and the radio as it was before flashing

Can you explain to me waht the SPL initals mean?

IPL - Initial Program Loader, a bit like BIOS on a desktop.
SPL - Secondary Program Loader, the bootloader, which starts the OS.
and for the number as you know it's like a version and when it .111 it's unlocked as i know
sorry that is all i can tell cuz i'm not knowing alot about these

Tanks a lot...

tuscho said:
Tanks a lot.
My first atempt wiil be the YuE v11.3 ExtraClean, because i wanna focus in performance. I am in middle of a .NET mobile development, and want to have a faster Smartphone to test my apps.
Tanks by reply... Other thing: CID locked devices really must bu unlocked first right? I tried unlocking by downloading a app that i get in this forum, but he doesn´t works in Windows Vista: doesn´t recognize my device during procedures... Windows Vista uses "Sync Center" and not "Active Sync"... does anyone had this problem using Vista?
Regards,
Tuschinski.
Click to expand...
Click to collapse
Hey tuscho!
Were you able to flash the new rom in your p3301 with success?

How many of us have successfully flash WM6.5

Well
how many of us have successfully flash WM6.5?
is it advisable to flash it?

Personally I am happy with SPB Mobile Shell 3. The I am not interested in another WinMo version until 7, which will need another phone.

GPS performans with WM6.5
Flashed with Tommy34's ROM with WM6.5.
Very happy that my GPS fixing -boring- delay is fully resolved.
I almost believed in my Device have had a hardware defect, then realized it is none..
I have got one single trouble that SKYPE WinMobile v2.5 can not be installed..
I will try v3.0 Beta ASAP I am able to download..
***Edited***
Beta v3.0 works out..

I installed tommy34 cHome 0.4 ROM and I'm very happy with it. My gps finally works too...and the phone is more response in general.

i have used
hi
i have used ironeagles,tommy34 & right now using Pdaviet 6.5ROM V07
Which i have posted today at the Jade Rom development
all are working fine and no problem at all for me

Hy everyone,
i'm using the ironeagles version and it's working really smooth.

erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it

redsuns said:
erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it
Click to expand...
Click to collapse
try reading this post:
http://forum.xda-developers.com/showthread.php?t=514406
good luck!

@redsuns have u dont HSPL
hi
first u need to do ur HSPL a tute is given in the jade rom development section
read the same and do it as u cant flash cooked ROMs without HSPL
but remember if u do it u will lose ur warranty
once u have done the same Flashing is very easy
if u cant understand i will give u details but first get ur HSPL done OK
redsuns said:
erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it
Click to expand...
Click to collapse

haree said:
hi
first u need to do ur HSPL a tute is given in the jade rom development section
read the same and do it as u cant flash cooked ROMs without HSPL
but remember if u do it u will lose ur warranty
once u have done the same Flashing is very easy
if u cant understand i will give u details but first get ur HSPL done OK
Click to expand...
Click to collapse
eek
i dun wan to lose my warranty
maybe i should drop the idea
thanks anyway

@redsuns
hi
Yes it if scared u don't do it for ur info my phone is new too around 2 weeks old but i did it on the third day
redsuns said:
eek
i dun wan to lose my warranty
maybe i should drop the idea
thanks anyway
Click to expand...
Click to collapse

I have not been able to flash my phone.
I am using Vista and when I try and flash the rom on the phone, I get:
Vista has found new hardware (I think it was a CDMA Driver)

I've flashed WM6.5 (can't remember which version I used), and I thought all was going well, until I tried to sim unlock it. The phone is 2 months old, with Orange branding, and had the horrible Orange Unique Manager, which is why I wanted to flash the phone, and I assumed the phone was simlocked. After I flashed it, I bought a Sim Unlock Code, but when I put a 3 sim card in, I didn't get the expected "Enter SIM Unlock Code" prompt. Instead I just get "No Service" displayed on the home screen with the exclaimation mark at the top where the signal strength is displayed. I've also tried with an (active contract) T-mob Sim, and a Tesco Mob Sim. Same thing, I don't get the prompt to be able put the unlock code in.
I can't help thinking it's because I've flashed the phone, it seems like there's something preventing the Enter SIM Unlock Code dialog from coming up. Is there anyone else with this problem, or a solution? What ROMs are people using that they have sucessfully SIM unlocked their phones with?
Thank you!

So does it still work with an Orange Sim?

I have flashed my Orange UK Jade with various flavours of WM6.5, all with good results, currently using a version cooked by PDAVIET, with no issues.

Guys, is it possible to flash to Windows 6.5 then flash again to 6.1 if all doesn't go well?

just wondering but are PDAVIET, Ironeagle and Tommy34s version of wm 6.5 all have 8gb micro sd support. And also which would you recommend as the best.

I flash 6.5 German and ist is working grate.
I used
Jade_LeanCut_GER_WM65_5.2.23001_OEM_2.33.721.1
Installed
2DManila_1_20_19131530_00
And MUI 407 files from erviuskitchen german kittchen.
And installed only th programms that i need.
Only i need Thai caracters in sms. It is not possible to change the thaom font to a full wich Asiatic caracters. installed msss.tff and change all to it, but manila sms does not take care about font change in sms/messages...
I tryed to coock a rom usin erviuskitchen german kittchen wich only changing tahoma font. but all roms i cooked with it are getting instable after 2 dayes. My favorite navigation system wich german and Asien maps does not start afer 3 times anymore.
Si i stick nearly fully satisfyed with the Jade_LeanCut_GER_WM65_5.2.23001_OEM_2.33.721.1

Hi,
I got my HTC since 2 mounth, and i really want to test WM6.5, but i must say that i'm a little afraid about flashing my phone.
I've read the "flash for n00bs" post, and it seems that there is a way to "flash-back" your phone to a factory version, am I right...?
By the way, if i want to use my waranty, can i "flash-back" my phone ?
Sorry for my bad english, thanks guys !
Eizig from France

Hello,
I am from Brazil and bought my Touch 3G about two months ago. It came with WM 6.1.
Last week I successfully applied the "Hard SPL 2.33 by Olinex" and then Flashed it with "Touch3G__WM6.5__2_33_721_17__B23033_WWE" ROM from PDVIANET.
Everything is running fine. The only comment is that we really need to disabled the 3G (H) network and run just with Edge (E) in order to save some battery. Other than that I recommend everybody to upgrade to WM 6.5
Fleck

HTC Snap Serial Number

Hi all,
I want to try and official version of WinMO 6.5 for HTC Snap.
I know we can download from HTC websit, however Telefónica here in Spain doesn't allows to flash HTC Snap to 6.5.
Can someone send me a serial number only to download the ROM from HTC?
Many thanks
-Eric

I have a few users that would love the upgrade too
All we need is the right format serial, this is what I did for an upgrade for my touch pro a while back.
The snaps we have are HT963N then 6 digits eg HT963N123456 it should be as simple as changing some of the first few digits.
HT962N comes up as valid but 'not suitable' too..
We dont need a proper serial, just the right format.. anyone?

Sorry for asking the question but...
Why don't you just read your Snap's S/N under its battery ?

koriolys said:
Sorry for asking the question but...
Why don't you just read your Snap's S/N under its battery ?
Click to expand...
Click to collapse
Because the serial numbers we have dont allow you to download the update from the HTC site.

looks like all you have to do is change the last 4 digits of the serial number till one works. i used 2211

Had to do the HardSSPL first.
http://forum.xda-developers.com/showthread.php?t=550620
this install gets to 23% then dies.
Going to have to try and find an original flash or get one of the re-cooked ones now.

OK, I used a fried one for asia and it worked, I also discovered if I changed my country to Singpore on the HTC site I was able to download the Asia version, which would also work on my device.

emarinho said:
Hi all,
I want to try and official version of WinMO 6.5 for HTC Snap.
I know we can download from HTC websit, however Telefónica here in Spain doesn't allows to flash HTC Snap to 6.5.
Can someone send me a serial number only to download the ROM from HTC?
Many thanks
-Eric
Click to expand...
Click to collapse
You can downloaded it from the official website:
http://94.136.51.200/download/RomCo...gned_MAPLE_61.36t.25.29U_3.47.25.48m_Ship.exe

Hi br
I look for HTC Snap (Bouygues) s/n to download from htc support please
Thanks for hulp

pls Serial Number for Download Arabic Rom

[Q] How to Get Windows Mobile 6.1 (6.5 ?) for a MDA touch plus

Hey guys,
I'm pretty sure that this question has already been answered but after going through many threads, I still don't get it, haha.
I have got a MDA Touch Plus (Htc Touch Dual) from T-Mobile UK which is set with Windows Mobile 6.0 (version from 2008, the oldest one I believe). I'd like to update it to WM 6.1 or above (6.5 ?) but I have no idea how to do that.
I tried to get the official version of WM 6.1 from the htc's website, it said that the software wasn't suitable for my device.
I managed to download it anyway using another HTC Dual Touch's serial number but I don't feel confident trying to install it when the website stated that it wasn't suitable.
Here are my questions then:
- Is there a risk of damaging the mobile phone if I try to install the official version that wasn't apparently suitable for the mobile phone ?
- Where can I get a version of WM 6.1/6.5 that will work with my phone ?
- Is there a guide to install it ?
- My phone is unlocked so I can use my Orange's Sim as well, by updating it using an unofficial version of WM, will the phone stay unlock ?
I apologise if my questions are quite silly but I haven't got any experience in customing ROMs and all that kind of stuff ^^"
Many thanks,
Tomas
EDIT: I found those threads http://forum.xda-developers.com/showthread.php?p=2778832#post2778832 and http://forum.xda-developers.com/showthread.php?t=355730. The step by step instructions are quite straight forward but still, without a WM 6.1/6.5 ROM, I won't be able to use my phone, right ?

you should see the same problems with you at http://forum.xda-developers.com/showthread.php?t=526378

I checked that post and that's how I made my way to the Main HardSpl/uspl (whatever it means) thread actually.
I found some interesting stuff on how to proceed, I'm just not really sure of what I'm doing.
Thanks again

Eroeroseijin said:
I checked that post and that's how I made my way to the Main HardSpl/uspl (whatever it means) thread actually.
I found some interesting stuff on how to proceed, I'm just not really sure of what I'm doing.
Thanks again
Click to expand...
Click to collapse
with flash HardSPL ROM you will be able to flash anything to your device!
This Windows Mobile 6.1 ROM ---> http://forum.xda-developers.com/showthread.php?t=435512&highlight=mirror
and Windows Mobile 6.5 ROM ---> http://forum.xda-developers.com/showthread.php?t=497347

Hakim Rahman said:
with flash HardSPL ROM you will be able to flash anything to your device!
This Windows Mobile 6.1 ROM ---> http://forum.xda-developers.com/showthread.php?t=435512&highlight=mirror
and Windows Mobile 6.5 ROM ---> http://forum.xda-developers.com/showthread.php?t=497347
Click to expand...
Click to collapse
pleez get me a rom 4 htc touch dual (NEON300) 3G front camera,,,,pleeeeez hakim bhai

Eroeroseijin said:
Hey guys,
I'm pretty sure that this question has already been answered but after going through many threads, I still don't get it, haha.
I have got a MDA Touch Plus (Htc Touch Dual) from T-Mobile UK which is set with Windows Mobile 6.0 (version from 2008, the oldest one I believe). I'd like to update it to WM 6.1 or above (6.5 ?) but I have no idea how to do that.
I tried to get the official version of WM 6.1 from the htc's website, it said that the software wasn't suitable for my device.
I managed to download it anyway using another HTC Dual Touch's serial number but I don't feel confident trying to install it when the website stated that it wasn't suitable.
Here are my questions then:
- Is there a risk of damaging the mobile phone if I try to install the official version that wasn't apparently suitable for the mobile phone ?
- Where can I get a version of WM 6.1/6.5 that will work with my phone ?
- Is there a guide to install it ?
- My phone is unlocked so I can use my Orange's Sim as well, by updating it using an unofficial version of WM, will the phone stay unlock ?
I apologise if my questions are quite silly but I haven't got any experience in customing ROMs and all that kind of stuff ^^"
Many thanks,
Tomas
EDIT: I found those threads http://forum.xda-developers.com/showthread.php?p=2778832#post2778832 and http://forum.xda-developers.com/showthread.php?t=355730. The step by step instructions are quite straight forward but still, without a WM 6.1/6.5 ROM, I won't be able to use my phone, right ?
Click to expand...
Click to collapse
dear brother i have the same htc touch dual (NEON300) 3G phone can u plz send me that rom u have dowloded from htc u can attach that zipped folder to mail and send it me on <[email protected]> plz it kind of u thanx in advance..

sunnykhan000 said:
pleez get me a rom 4 htc touch dual (NEON300) 3G front camera,,,,pleeeeez hakim bhai
Click to expand...
Click to collapse
you should see http://forum.xda-developers.com/showthread.php?t=508506
and at http://forum.xda-developers.com/showpost.php?p=3398273&postcount=7
I think you 'll find what you're looking for htc touch dual (NEON300) your own

thanx in advance bro