Related
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for days and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what's happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed, taken out the sd card, but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
Please help!!!
G
hard reset
The only solution that always works
funny but not helpful!
thimiost said:
The only solution that always works
Click to expand...
Click to collapse
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
wmfreak said:
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
Click to expand...
Click to collapse
you must read carefully it is hard reset
he just told you m8 perform a hard reset on the device
I guess nobody read my post!
evo6 said:
he just told you m8 perform a hard reset on the device
Click to expand...
Click to collapse
If look carefully it does say that I've hard reseted, reflashed with different rom including cooked rom but same problem!!!
any help?
regards,
G
Format Your sdcard. the file must be on there if youve reflashed
Done that too!
fards said:
Format Your sdcard. the file must be on there if youve reflashed
Click to expand...
Click to collapse
I even swapped SD cards, formatted them you name it I've done it!
Please share your wisdom if you have an answer!!!
PS debug tool 3.4 is what's causing the problem!
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
In makes sense but!
doctorcete said:
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
Click to expand...
Click to collapse
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
wmfreak said:
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
Click to expand...
Click to collapse
I know hard reset should have helped, but try letting the phone empty and then remove the battery for a couple of hours-day, then try it agian.
Mabey I don't get the question but.. how come it's still working with the debugging tool while the phone is flashed? The debugging tool is prob. placed on a special sector of the main memory normaly not accessed by a rom, the program it self doesn't run from normal memory sectors, so you might have a try with a SPL update/overwright. If all fails send it back, why would htc give you this program? they allways say send it back and you'll get a new one?...
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
how are you doing a hard reset?, are you using the clean memory tool software on your device, or are u pressing vol up and down simultaneously while powering on the device...... I just dont get how the program stays in memory after hard reset, even after flashing.
lucid said:
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
Click to expand...
Click to collapse
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Here is the tool! (BTW i fixed the problem)
okokur said:
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Click to expand...
Click to collapse
I've attached the toll. I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401. Give it a go if you know what you're doing and you can read log files.
regards,
G
You got rid of it. I edit out the post
Solution:
First backup your SD, after format with FAT32 .... reinstall your ROM and after insert your SD.
got dmmnit, glad u got rid of it, maybe we can learn how it.doez stick to the rom like that n use it in other apps like smartprotect. congrats!:
hi, do u mind sharing how u got rid of it?
I run this tool too, but after have no way to stop first try to read forum. Solution to stop program already is given from wmfreak. It is not need to make hard reset or to reformat SD card. Only things to do is to run program one more time and:
wmfreak said:
I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401.
Click to expand...
Click to collapse
Thank you wmfreak
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
try the strenas rom (arthemis V2). It has solved my pb
[email protected] said:
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
Click to expand...
Click to collapse
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
willbread said:
try the strenas rom (arthemis V2). It has solved my pb
Click to expand...
Click to collapse
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
Click to expand...
Click to collapse
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
tommyjakobsen said:
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
Click to expand...
Click to collapse
When you flash lots of cooked roms, they get "bloated" and the devices started hard-resetting for no reason. this is because of files from old roms being left when the new rom is flashed.
MTTY allows you to enter the device on bootloader and use service commands to format the file system on the device so you can remove all rom files before flashing a new rom!!
Click to expand...
Click to collapse
basicly it will format your system and make sure you don't have any files from older roms left on the system which might cause this issues.
tommyjakobsen said:
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
Click to expand...
Click to collapse
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Petulinek said:
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Click to expand...
Click to collapse
and for me, this didn't help me
willbread said:
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Click to expand...
Click to collapse
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
I had this "freezing during startup" with a number of roms (always after I installed my software) and since that I am always "tweaking" it by the startup order as I described it and was able to solve it!
I do not think that it is hardware related in the amount of cases which are reported. And I am also not a strong believer of this "flashing" and mtty discussion (it could be a solution is some cases but I do not think in this relatively larger number of cases which are reported).
For most of the rom cookers it is not the 1st rom cooking they are doing and the HD2 is not the 1st HD2 device for HTC as well. This is the reason why I do not think that there is a principle rom problem nor a principle hardware problem
Manila Sense is a complex pcs of software and the startup is therefore more complex.
Depending on the tweaks the rom cookers are doing on the XIP and other WM internals there could be a timing interfearance during booting and this is creating the trouble for Manila Sense startup (network, phone, etc.).
Reminds me to the "good old days" with ATART-ST where you had dedicated tools to rearrange the startup seaquenze of the Accessories
At least i think it is worth trying it, you cannot loose anything.
But I played not only with the finaly boot order of htc-Sense (the last one) but also I put other elements in a different order.
Sometimes it was helping to install Panolauncher and put it before HTC Sense startup - I had the impression that just having another application before HTCsense made an improvement to "give HTCSense" more time.
Does not sound like science but a little bit like Voodoo ...
My Autostart folder (only the applications)
1. poutlook.lnk
2. BTTrayCE.lnk
3. De|WMPTempFolder.lnk
4. PKG.lnk
5. Lotus Traveler.lnk (installed by me)
6. LotusPRUploader.lnk (installed by me)
7. Panolauncher.lnk (installed by me)
8. OM10QS.lnk (installed by me - Opera 10 beta)
9. HTCStartUp.lnk
Good luck
dingolino
tommyjakobsen said:
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
Click to expand...
Click to collapse
gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out.
Click to expand...
Click to collapse
i haven't the folder "\Application Folder" on my card. Maybe, this is why this rom works well
I haven't verifyed before so i can't tell you if i had it before
Hi,
could you try to flash ROM that have manila 1921 (manila without document tab),
I facing so many problem when I install ROM with manila 1922 (manila got document tab)
Now has been 4 day, without any problem flash ROM with manila 1921...
give a try...
mtty may help u out
dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
dingolino
Click to expand...
Click to collapse
so i just got the last version of sktools.....could anybody please explain how I can change the startup order? sktools has allot of tools and I just cant figure out how its done!
thanx!
Hi,
sounds to me like you have flashed so many times you HD2 has become "Bloated"
this is where for eg, Rom X is 110Mb, and then you Flash Rom Y which is only 100Mb.
When you do the flash there is 10Mb of residual files left from the previous rom., when this happens often you get strange things happening like you describe and worse, your device can start hard resetting for no reason!!
Go to this thread (swap the ** for tt ) h**p://forum.xda-developers.com/showthread.php?t=616422 (I cant post links yet!!) and it will fix your issue. (The thread has been shut as there has been a big argument over it, something to do with a disagreement over drivers!! - how gay!)
I can honestly say, although i have only joined recently, i have been a user of this method for about 6 years, I personally know the Guy who opened the thread and i would stand buy him 100%.
Although the thread is closed, i will help with queries via PM if you like!
SS
gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
Click to expand...
Click to collapse
I tried deleting the \Application Folder folder and reset the phone.
Of course this equaled a hard reset as all system data stored was in \Application Folder.
So I removed my storage card and did a hard reset so that the system data will not be stored in the storage card.
Hopefully this will be make the device more stable as such.
use the mtty to format ur device first, then flash the rom u want to flash.
I have encountered the same issues just like u, after use the MTTY, so far so good.
the post is kind of complex, but it is worth to have a try.
I have downloadec otullas pack but all I get when in Android is a black screen. Can someone please post a step by step guide to using it so I know where I've gone wrong?
stephen1uk said:
I have downloadec otullas pack but all I get when in Android is a black screen. Can someone please post a step by step guide to using it so I know where I've gone wrong?
Click to expand...
Click to collapse
step 1. click the HaRET.exe file ...
step 2.Done.
I don't know what I've done wrong then, I just get a black screen and then a message to do with settings and the option of force close. Any ideas?
stephen1uk said:
I don't know what I've done wrong then, I just get a black screen and then a message to do with settings and the option of force close. Any ideas?
Click to expand...
Click to collapse
seems Android is crashing when it starts..
check this out http://forum.xda-developers.com/showpost.php?p=12060926&postcount=35
and better use this pack
Apparently my card isn't recognised by the formatting program :s
hmmm then it might be card fault...
replace it if u have other one,if not keep trying to format it like i stated in instructions
Looks like I may have to accept it isn't going to work , using the new pack once I have the same issue.
"The aplication settings has stopped working un expectedly. Please try again."
stephen1uk said:
Looks like I may have to accept it isn't going to work , using the new pack once I have the same issue.
"The aplication settings has stopped working un expectedly. Please try again."
Click to expand...
Click to collapse
i got the same message, i close the file explorer (end task from task manager), and i open it again then click haret again.. it works for me. maybe u can try that
Forgive me for being thick but I assume I do this once Android.has booted up? If so how do I access task manager in Android, all I can do is access recently used apps by pressing dial button.
as far as I know,sandisk card is bad support by android on mini.try to get another sd card to test.Good luck！
as far as I know,sandisk card is bad support by android on mini.try to get another sd card to test.Good luck!
stephen1uk said:
Forgive me for being thick but I assume I do this once Android.has booted up? If so how do I access task manager in Android, all I can do is access recently used apps by pressing dial button.
Click to expand...
Click to collapse
No no..what he meant was for WM..close the file explr using task manager...then start the process again
15131331231 said:
as far as I know,sandisk card is bad support by android on mini.try to get another sd card to test.Good luck!
Click to expand...
Click to collapse
card compatibility was not a problem with droid..it was the card formatting prob...alot of other users had the same problem with android not picking up their card including myself...it was corrected by tzacapaca who provided me card format software..with that compatibility issue was resolved.
stephen1uk said:
I don't know what I've done wrong then, I just get a black screen and then a message to do with settings and the option of force close. Any ideas?
Click to expand...
Click to collapse
Just boot without Sim card (Only first boot).
Problem with APN.
sunnyhj said:
card compatibility was not a problem with droid..it was the card formatting prob...alot of other users had the same problem with android not picking up their card including myself...it was corrected by tzacapaca who provided me card format software..with that compatibility issue was resolved.
Click to expand...
Click to collapse
But I met the same problem in the beginning,used to android my mini with sandisk card,but it load android very slowly.when I changed a card,kingston,it load fast.that time I do not know the why.it is only suggestion.sorry for my poor english.
Dears
I have faced the same problem, I tried to format the SD card several times but didn’t work.
I solved it by changing the SD card and it work like a charm (change SD card )
Best regards
I have wifi problem in all android roms but not in Windows mobile 6.5 stock rom.
When i use android i cant find my router (or if I find it i get disconnect after 5 minutes) which is dlink but when i use the stock Wm i find it. My dad have HTC wildfire and he can find the router only my phone cant. So i want to know is this hardware or software problem of my HD2, and how i can fix it.
Sorry about my poor english.
Help me please i don't know what to do whit this phone when i dont have wifi I really like it i dont want to sell it.
If you're not a noob to flashing, try Sergio's Coredroid V1.6. Best result on wifi
Sent from my HTC HD2 using XDA App
wowrlz123 said:
I have wifi problem in all android roms but not in Windows mobile 6.5 stock rom.
When i use android i cant find my router (or if I find it i get disconnect after 5 minutes) which is dlink but when i use the stock Wm i find it. My dad have HTC wildfire and he can find the router only my phone cant. So i want to know is this hardware or software problem of my HD2, and how i can fix it.
Sorry about my poor english.
Click to expand...
Click to collapse
when you flash a rom do you start with task29? if not its best you do because if you are overwriting roms it can leave you with a few traces from old rom and also picks up a few errors.. if you are using task29 then it could be hardware problem and no one can help you with this except a repair shop but cant see it being hardware as you said it works in winmo..
LaneyEFC said:
when you flash a rom do you start with task29? if not its best you do because if you are overwriting roms it can leave you with a few traces from old rom and also picks up a few errors.. if you are using task29 then it could be hardware problem and no one can help you with this except a repair shop but cant see it being hardware as you said it works in winmo..
Click to expand...
Click to collapse
I start with task 29 next i flash radio then MAGLDR CWR and rom. It is maybe a hardware
i have aslo a problem with my wifi, when i find a network i click "connect" then under WIFI i see "searching"----> "connecting"--->"disconnect" now i find a network where it stopping on taking IP adress
I solved my problem. When i go to setting> wifi>wifi settings> menu> advanced> Regular domeyn(or sth like that) and 13 channels. Now i'm OK thank for your answers anyway
any help please? i was trying to replace the newest apks. but i cannot copy them into system folders, i cant see them while copying and i am using [16.JUL.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.2[2.3.4][A2SD][tytung r10]
any solutions?
silnygeralt said:
any help please? i was trying to replace the newest apks. but i cannot copy them into system folders, i cant see them while copying and i am using [16.JUL.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.2[2.3.4][A2SD][tytung r10]
Click to expand...
Click to collapse
You need "Root Explorer." A paid app. Or connect to PC and do it that way. Using any regular file expired or manager wont make the cut because you will then experience what you're experiencing. Stairing blindly at the system folder.
Sent from my HTC HD2 using XDA App
now i got root exploler but cannot copy anything because full 140 mb is used and cannot coppy even this 200 kb apks from wifi, any other solutions?
bump? i just flashed 2.3.5 version of the same rom and its still disconnecting
hi finally i connect to a wifi while using HD2 CoreDroid HD GB 2.3.3 V1.6 but it still seems like i wasnt connected i cant browse pages, wather and all this stuff asking to check if i am connected to internet
i will bump untill i get answer, maybe someone have the same problem?
No wifi nor web access!
I have the same problem: no access (with very few temporary exceptions) to wifi. No network is detected, while I am sure there several available.
Moreover, even in 3G, I have no web access (whatever is the browser used).
I installed HD2 CoreDroid HD GB 2.3.3 V3 a few days (http://forum.xda-developers.com/showthread.php?t=926507) and strictly implemented installation instructions (Task29, format SD Card, and then install instructions given on the webpage).
What can I do? Thanks in advance for your help. This Rom is excellent and I would like to use it!!!
astdenis said:
No wifi nor web access!
I have the same problem: no access (with very few temporary exceptions) to wifi. No network is detected, while I am sure there several available.
Moreover, even in 3G, I have no web access (whatever is the browser used).
I installed HD2 CoreDroid HD GB 2.3.3 V3 a few days (http://forum.xda-developers.com/showthread.php?t=926507) and strictly implemented installation instructions (Task29, format SD Card, and then install instructions given on the webpage).
What can I do? Thanks in advance for your help. This Rom is excellent and I would like to use it!!!
Click to expand...
Click to collapse
Al the coredroid faq and are here, if you still have isses post on the coredroid thread its very active
https://docs.google.com/document/d/...lbe2ffI/edit?hl=en_US&authkey=COPt5_EN&pli=1#
well now everything is ok, and it seems that it was ok from the start, just try to find any hotspot in your city and try to connect to it, one day i was walking and i though "hey why to not search for any wifi signal" and i found one, tap on it and woah! its working ^^ now everything is working for me, just make sure you you get everything configured
Hi all, can anyone help me. How do i put android on htc hd2 without removing windows and are you able to dual boot them or isent this possable
also can you get jelly bean ?
thanks
Please search before posting, there are many guides on how to do this.
Simply, you have to download a rom from the SD development section, put it on the root of your sdcard, go into winmo file manager and tap on clrcad and then haret.
You can also use NativeSD, but you have to look for that yourself.
You must have a compatible radio, and yes, you can have Jellybean. I don't know what you mean by "dualboot", isn't it the same as "run android without removing windows mobile" ?
Marvlesz said:
Please search before posting, there are many guides on how to do this.
Simply, you have to download a rom from the SD development section, put it on the root of your sdcard, go into winmo file manager and tap on clrcad and then haret.
You can also use NativeSD, but you have to look for that yourself.
You must have a compatible radio, and yes, you can have Jellybean. I don't know what you mean by "dualboot", isn't it the same as "run android without removing windows mobile" ?
Click to expand...
Click to collapse
thanks for replying mate, sorry i tryed to search but it didnt work for some reason. is it possable you can give me the link to the roms please?
also when you put android on the sd card and boot via file manager this dosent remove windows?
also dual boot means instead of me going into file manager to boot android when i turn the phone on i get the option to eighter boot in windows or android
DuffyLaad said:
thanks for replying mate, sorry i tryed to search but it didnt work for some reason. is it possable you can give me the link to the roms please?
also when you put android on the sd card and boot via file manager this dosent remove windows?
also dual boot means instead of me going into file manager to boot android when i turn the phone on i get the option to eighter boot in windows or android
Click to expand...
Click to collapse
Once again, search before posting. Literally everything you need to know can be found by searching. Are you so lazy that you can't even browse over to the SD Development section yourself?
Anyway, 1. No it doesn't remove WinMo and 2. There are apps which can do that (search for something like Android Loader, can't remember the name of it).
DuffyLaad said:
thanks for replying mate, sorry i tryed to search but it didnt work for some reason. is it possable you can give me the link to the roms please?
Click to expand...
Click to collapse
1- Even if the formus' search is "not working", Google never goes down. You didn't even try to search, did you?
2- No, sorry, it's not possible. (come on, just BROWSE TO THAT SECTION!)
see this thread http://forum.xda-developers.com/showthread.php?p=33988958
Sent from my HTC HD2 using xda app-developers app