Related
I really hope there is somebody with insight about my problem with my Samsung Omnia b7610.
A while a go I wanted to flash my Omnia (original version 6.5 from Samsung site)
It wend wrong...
When I now turn on my phone and connect it to PC, I only see the Battery charging. When I turn the phone on I only see the SAMSUNG logo.
I remember that before I could see a picture of a phone connecting to a pc. But that picture doesnt come anymore. So I Cant flash the phone anymore.
Hard reset doesnt work.
I tried Octans. Detect device doesnt work.
I use Win7 installed drivers and I can see in System Management that under phones Samsung MIT's USB sync is installed. That's all the phone can do right now.
I hope somebody can help me. Is there for example a way to get into a bootloader menu like the HD2 phone?
Thnx,
http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/294673/guide-to-flash-on-windows-7/
Try this flash tutorial for windows 7 x32
I used it for my flashings and it works.
One thing that you should verify is on the OCTANS or OCTANS MINI exe, the compatibility should be for Win XP.
After that if you have the drivers already installed, the phone should be detected after pressing "detect"
JUST PLUG THE PHONE AFTER PRESSING DETECT
if you don't do it it will start charging and does nothing
Thanks for reaction but...
real_life said:
http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/294673/guide-to-flash-on-windows-7/
Try this flash tutorial for windows 7 x32
I used it for my flashings and it works.
One thing that you should verify is on the OCTANS or OCTANS MINI exe, the compatibility should be for Win XP.
After that if you have the drivers already installed, the phone should be detected after pressing "detect"
JUST PLUG THE PHONE AFTER PRESSING DETECT
if you don't do it it will start charging and does nothing
Click to expand...
Click to collapse
Tried this, and I also tried it on a XP machine now...
I think the problem is that I only see the Samsung logo on startup. I can remember that first I saw a picture of a phone connecting to a pc. It just stops at the Samsung logo...
Thanx for reply...
just get octans 2.14 download any rom from modaco
1 take battery out put it back
2 start octans chose pda (*.nb0)
3 thick skip os updating from movinand, erase nv pda , start download immediately
4 click detect
plugin the usb into the device (must be off)
then a few sec download will start.
Does anyone know if there are 64-bit diag mode drivers available for the Droid X?
I realize Motorola has a 64-bit version of the USB Drivers and I have installed these. However, when I hold the camera button down while plugging in the USB cable some unknown devices come up in Device Manager (Data, Diag, MUX, and TCMD interfaces).
Without the Diag Interface driver I cannot get QPST or CDMA Workshop to recognize the phone port.
Thanks for any assistance. (Trying to get this phone flashed to Cricket)
fritzel67
fritzel67 said:
Does anyone know if there are 64-bit diag mode drivers available for the Droid X?
I realize Motorola has a 64-bit version of the USB Drivers and I have installed these. However, when I hold the camera button down while plugging in the USB cable some unknown devices come up in Device Manager (Data, Diag, MUX, and TCMD interfaces).
Without the Diag Interface driver I cannot get QPST or CDMA Workshop to recognize the phone port.
Thanks for any assistance. (Trying to get this phone flashed to Cricket)
fritzel67
Click to expand...
Click to collapse
Ah yes - the awesomeness that is a Droid X flashed to Cricket! I wouldn't have it any other way! Anyway, all you need is the MotoConnect drivers.
When flashing your phone, USB Debugging needs to be on and the phone needs to be in PC mode, not in the bootloader. No need to hold down the camera button. Just have the phone on; it doesn't matter if it goes to black screen (sleep) even while you are programming it.
Download Motorola 4.9.0 Driver with MotoConnect and use the middle option on the left side. I use it all the time to keep my drivers up to date and it works flawlessly on any Windows based OS ( I say that because that is what I have used it on). I have used it on both 32 and 64 bit Windows 7 computers so, if that doesn't work for you, then your problem is elsewhere.
Oh, if you need PRL 49027 to get 3G, let me know
Thanks much. I just installed the MotoConnect drivers, but when I hold the camera button while booting to get into diag mode, device manager shows several interfaces under "Other Devices" with exclamations indicating the drivers aren't installed (including Diag Interface).
When I start QPST, it detects an unknown COM port, but afterwards it says "No Phone" on the port. I also tried simply booting phone and placing in PC mode w/ debugging on, but no go.
The only diag mode specific driver I have found is 32-bit, and it won't install on 64-bit Winbloze 7.
fritzel67 said:
Thanks much. I just installed the MotoConnect drivers, but when I hold the camera button while booting to get into diag mode, device manager shows several interfaces under "Other Devices" with exclamations indicating the drivers aren't installed (including Diag Interface).
When I start QPST, it detects an unknown COM port, but afterwards it says "No Phone" on the port. I also tried simply booting phone and placing in PC mode w/ debugging on, but no go.
The only diag mode specific driver I have found is 32-bit, and it won't install on 64-bit Winbloze 7.
Click to expand...
Click to collapse
Why do you need to be in diag mode? To use QPST you need to have the phone on, USB Debugging on and in PC Mode. Make sure you are using the latest build of QPST which is 2.7 version 3.0.1 If you are, you may just need to add the port you made with HW Virtual Port in QPST. It's a simple setting and it will show up in QPST.
Finally got it. MotoConnect drivers did the trick along with the correct HW VSP settings.
Thanks for the assist!
Sent from my HTC EVO on Cricket using XDA app.
fritzel67, how were you able to do it? i'm stuck with trying to connect my phone on windows7 64-bit version. really stuck and did extensive research with 0 luck. help would be appreciated, thanks! and yes, i'm using a droid x. wanting to hook it up to qpst or qxdm possibly.
Ohh please I need for 32bit drivers
I need programm my motoroi X, thx
diag mode drivers 32bit
Ben's said:
Ah yes - the awesomeness that is a Droid X flashed to Cricket! I wouldn't have it any other way! Anyway, all you need is the MotoConnect drivers.
When flashing your phone, USB Debugging needs to be on and the phone needs to be in PC mode, not in the bootloader. No need to hold down the camera button. Just have the phone on; it doesn't matter if it goes to black screen (sleep) even while you are programming it.
Download Motorola 4.9.0 Driver with MotoConnect and use the middle option on the left side. I use it all the time to keep my drivers up to date and it works flawlessly on any Windows based OS ( I say that because that is what I have used it on). I have used it on both 32 and 64 bit Windows 7 computers so, if that doesn't work for you, then your problem is elsewhere.
Oh, if you need PRL 49027 to get 3G, let me know
Click to expand...
Click to collapse
Now I tried this and installed the Motorola 4.9.0 Driver with MotoConnect and got nothing. Once installed it just sits there. No drivers updated. Device manager refreshes like something happened but NOPE. Red X's all day.
I'm on 32Bit though. any other information you can spread. I gotta get phone into CDMA so I get data & MMS going on MetroPCS.
I also need a driver for the Droid X Diag Interface on Windows 7 x64. Searching it in the Internet I found nothing. Then I decided to remake the driver from the modem Novatel and I managed it. So, I presenting it to you:
Drivers for Motorola Droid X Diag Interface
Operating System: Windows 7 x64 and x32 and the other.
m.ksy said:
I also need a driver for the Droid X Diag Interface on Windows 7 x64. Searching it in the Internet I found nothing. Then I decided to remake the driver from the modem Novatel and I managed it. So, I presenting it to you:
Drivers for Motorola Droid X Diag Interface
Operating System: Windows 7 x64 and x32 and the other.
Click to expand...
Click to collapse
You can download official Motorola 32 bit and 64 bit driver packages from the MotoDev site....\
http://developer.motorola.com/tools/usb_drivers/
facepalm.jpg
Completely turn off your phone, then press camera button+power. When phone already turned on, connect it to PC and try to install the drivers from motorola site.
Has anyone managed to find drivers for the huawei hsusb device for windows 7 x64 ?
Has anyone managed to make the ideos x5 phone to work with the huawei's pc suite in windows 7 x64 via usb?
Check this out:
http://forum.xda-developers.com/showpost.php?p=13306262&postcount=14
I know this is alittle late, but this doesnt work for me.
It says Windows could not find driver software for your device, all though i've downloaded the right drivers and followed the toturial.
My guess is the drivers are outdated or MIUI isnt compatable with this drivers.
Thanks
Jacky444 said:
I know this is alittle late, but this doesnt work for me.
It says Windows could not find driver software for your device, all though i've downloaded the right drivers and followed the toturial.
My guess is the drivers are outdated or MIUI isnt compatable with this drivers.
Click to expand...
Click to collapse
Thanks
try these drivers
http://www.mediafire.com/?g0tt1te1o2to25n
the drivers are working on me, on a device based on msm7630 soc with msm8255 1.4ghz cpu which has the HSUSB activated, the method is the same as on huawei, press the volume - + and power in the same time for 5 seconds, and it enters in the hsusb state.
What is hsusb?
Sorry for the noobish
it`s a downloading/uploading mode, from which you can re-write all the information of the phone.
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Same Problem
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
I am having The same problem with Samsung S5 900F and Windows 7
Alejandro R said:
I am having The same problem with Samsung S5 900F and Windows 7
Click to expand...
Click to collapse
Same problem my phone is already with android Lolipop I think this have something to do
Alejandro R said:
Same problem my phone is already with android Lolipop I think this have something to do
Click to expand...
Click to collapse
+1 i think it might be due to the android 5
Would really appreciate if any expert can let us know for sure
screem_3 said:
+1 i think it might be due to the android 5
Would really appreciate if any expert can let us know for sure
Click to expand...
Click to collapse
me too I need the phone working with LTE 700/1700 bands
Me too... Any Solution for that ?
SM-G900F NOT WORK ON DM+MODEM+ADB
maybe a solution
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Acquarius7 said:
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Click to expand...
Click to collapse
He's right! turn on CP Logging then do it and it worked... The only problem I did face which could have been something different was when I used the app Samsung PHONE INFO and tried to get to the service menu it would come up blank, after disabling CP and back to MTP + ADB it came up again.
Also, I am on G900V with their newest firmware OE1 and there is no option for CP Logging anymore, it automatically detects it like it did in KitKat. (Just a side note)
I had faced the same issue
Booted into recovery and enabled CP logging. it works perfect
Quick Question
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
Hey, just a quick question, i'm currently attempting to do the same procedure on my Ulefone future, and i'm having a tough time finding a way to access the hidden advanced usb settings menu.. Now, saying that i'm a neophyte with the higher end of android tinkering would be an insult to neophytes everywhere. I am utter clueless when it comes to this stuff.. My phone has been rooted and every pre-requisite has been met, i simply cannot find the code for accessing this blasted hidden menu, please let me know how you accessed your usb setting menu.. I would appreciate you and love you, platonicly, forever.
thaaaaaaaaaaaaaaaaaanx.. it's working 100%
Acquarius7 said:
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Click to expand...
Click to collapse
I would like to thank you so much for this solution. I spent a lot of time trying to find a solution for Samsung S4 beeing not recongnized by the PC in DM + MODEM + ADB mode and you gave me the solution. Thank you.
I have a Lumia 520 (RM-915 version) 520 with windows 8.1 Developer Preview. Cyan Lumia wanted to install update so I used the software recovery tool for downloading Nokia firmware version 3058.50000.1425.0001. Installation began and showed an error of 1%. An option to recover appeared and tried but could not. Now the phone is bricked and when connected to the PC, shown as QHSUSB_DLOAD device. In Nokia Care Suite PST shown as USB: The product in flash mode selection data packets failed and reading product codes no error. When I select Open Product, select the device and select the data packet, which tells me hold Down + Power button until it vibrates and then retry. When I try no vibration could only see that the USB is disconnected and reconnected. Is there no way to recover it at home using my pc and usb cable?
use the following programs: nokia care suite, nokia software recovery tools, lumia software recovery tools, windows phone recovery tools
I leave you with this hope your help as possible to please
regards!!!!! :crying::crying::crying::crying:
Crispyn said:
I have a Lumia 520 (RM-915 version) 520 with windows 8.1 Developer Preview. Cyan Lumia wanted to install update so I used the software recovery tool for downloading Nokia firmware version 3058.50000.1425.0001. Installation began and showed an error of 1%. An option to recover appeared and tried but could not. Now the phone is bricked and when connected to the PC, shown as QHSUSB_DLOAD device. In Nokia Care Suite PST shown as USB: The product in flash mode selection data packets failed and reading product codes no error. When I select Open Product, select the device and select the data packet, which tells me hold Down + Power button until it vibrates and then retry. When I try no vibration could only see that the USB is disconnected and reconnected. Is there no way to recover it at home using my pc and usb cable?
use the following programs: nokia care suite, nokia software recovery tools, lumia software recovery tools, windows phone recovery tools
I leave you with this hope your help as possible to please
regards!!!!! :crying::crying::crying::crying:
Click to expand...
Click to collapse
using USB Cable no , maybe if anyone find or crack Best Box infinity last version you can unbrick by usb
else , you have to use a box like riff or JTAG