Call log strangeness - Nexus S General

For the past couple days i have noticed that there are outgoing calls listed in my call log to numbers i don't know and for calls i didn't make. Anyone else have this issue? When I call the numbers back they say they can not be completed as dialed.
Sent from my Nexus S using XDA App

Item one: if you've downloaded any less-than-reputable apps, delete them. Also run a malware scan. Before you diagnose your call log, make sure nothing's hijacking your dialer.

Do you by any chance use bluetooth earpiece? My mom's NS does that sometimes and I think it's cuz her bluetooth gets accidentally activated in her purse and it picks up voice dialing or what not.
Could be malware too tho... but I'm not really sure since my mom rarely installs any apps on her phone. I'm the one that does the installing and only thing she has that I don't have is some Chinese keyboard to type in Chinese. I've installed way more junk on my phone and I've never experienced that random dialing before.

What's a good malware scan app? Any particular recommendations?

http://androidforums.com/droid-supp...0284-my-droid-randomly-dials.html#post1837674
Someone says it might be a busted bluetooth headset.

Related

Incoming call issue

I am having a issue where someone will call me and for them it will ring till voicemail, but the call wont register on my phone that it recieves a call, so the person will have to call me a couple of times to finally have my phone register the call.
I am curious if this is a issue with tmobile or just my phone. It doesnt happen all the time, but when it does its kind of annoying. And its been happening on multiple builds, be it desire, miui, or gingerbread. I am not sure if there is a possible fix for this or not, but if anyone else has this issue feedback would be awsome
bump bump
if you are using a sense rom maybe you turned on "blocked callers"?
right now i am using a miui rom. and block callers would still register on my phone, it would just take a few tries so it wouldnt be a blocked caller

[Q] Issue receiving incoming calls

I've the S4 for a little over a week, but it's been a rather busy week so I haven't given it my full attention as yet. I really like it so far, I haven't gotten all the bells and whistles to work and I'm testing battery life with them disabled vs enabled etc. But I'm not really doing much else with it yet.
The only actual issue I'm having is receiving phone calls. When someone calls me, it takes a couple rings on their end before my phone starts ringing (I've encountered this with Sprint before though) but then when I try to answer the call, I don't get the person on the other end. I get a recorded message telling me I've got an incoming call from (name of caller in my contacts list) and if I want to accept to press 1 now. The message takes so long to get to that point that by the time it tells me to press 1 to accept the call, the call goes into voicemail.
I don't receive a lot of phone calls, but I would like to be able to actually answer them when I do. As of now when someone does call me I have to call them back.
This message plays AFTER I've 'accepted' the call on the screen and it plays through the handset not the speakers. I have Google voice set up for my voicemail.
Any assistance would be greatly appreciated.
Sounds like you have google voice setup or you used to. You will have to go to the site on your pc to disable it.
Sent from my icrap 2 using Tapatalk HD
cruise350 said:
Sounds like you have google voice setup or you used to. You will have to go to the site on your pc to disable it.
Sent from my icrap 2 using Tapatalk HD
Click to expand...
Click to collapse
I thought Google Voice had something to do with it but I didn't think of checking the settings via PC.
For anyone else with the same issue: Google.com/voice>settings>calls> call screening off.

[Q] Help---people can't hear me

I had an issue with my LG G2 where people can't hear me when I call them. If I turn on speakerphone, they can usually hear me then. So I exchanged my G2 for a new one. Same problem now. About every 5th call or so, people can't hear me. It's driving me nuts. Could there be some software that's messing things up? I have google voice installed, and while most of the calls in question are GV calls, not all of them are. Just called someone now from my regular number and they couldn't hear me. Anyone have any tips or even advice on how I can tackle this?
Running latest Android updates and apps always, no root. Verizon. Calls placed from random locations (and even different states).
I am having the same issue. There are a couple of things I have tried. The most promising is to turn off Google hotword detection on every screen.
You can also try turning off the Privacy Keeper and Voice Enhancement in Call Settings. If any of this works for you, or you find and answer, let me know!
eepyikes said:
I had an issue with my LG G2 where people can't hear me when I call them. If I turn on speakerphone, they can usually hear me then. So I exchanged my G2 for a new one. Same problem now. About every 5th call or so, people can't hear me. It's driving me nuts. Could there be some software that's messing things up? I have google voice installed, and while most of the calls in question are GV calls, not all of them are. Just called someone now from my regular number and they couldn't hear me. Anyone have any tips or even advice on how I can tackle this?
Running latest Android updates and apps always, no root. Verizon. Calls placed from random locations (and even different states).
Click to expand...
Click to collapse
Having the same issue with 2 lines, same LG G2 phone. Called Verizon, was told it sounds like a hardware issue. I'm thinking it's something to do with their Android update personally.
Had exact same issue and took phone to repair center. They said it was mic issue. They ended up replacing the entire phone but guess what - issue is still there on new phone.
Sent from my LG-D802
I've seen this issue on many forums and with the number of people that are having the problem, it has to be either LG flaw or a software issue. I'm trying turning off the ok google, noise cancellation, and privacy keeper. But I'm pretty sure I tried those on the last phone with the same results.
Just to make sure we're all having the same issue, you can be heard once you turn on speakerphone, correct?
Update on this: Still having the issue after disabling ok google hotword..
eepyikes said:
Just to make sure we're all having the same issue, you can be heard once you turn on speakerphone, correct?
Click to expand...
Click to collapse
I read your reply some time ago but didn't answer because I had no answer.
Today the bug appeared again so I turned on speakerphone like you said. Guess what, they could then hear me!
Thanks for the tip @eepyikes, its a good workaround but lets hope for a proper solution.
Sent from my LG-D802
Any of you with this issue also have a Pebble or other type of smart watch?
I've noticed the same problem but the issue goes away when my Pebble isn't actively paired.
cahiatt said:
Any of you with this issue also have a Pebble or other type of smart watch?
I've noticed the same problem but the issue goes away when my Pebble isn't actively paired.
Click to expand...
Click to collapse
-Correction- I hadn't had this issue since I disconnected my Pebble about 10 days back. It came back today when I made a call. What I noticed today is.......
When I switched to the speakerphone the person still couldn't hear me very well. Switching back to mic the problem is still there. But when I turned on my BT headset the audio was fine. Switching back to the phone mic from the BT the problem cleared up.
Did a test call initiating the call on the BT headset and had the same audio problem through BT. Switching back to the phone mic or speakerphone cleared it up.
Initiated another call on the speakerphone. Same audio problem. Switched to BT and it cleared up again. Switched back to the phone mic and it was still fine.
Seems the issue is there when initiating the call on BT, mic or speakerphone but switching from BT to the phone or phone to BT clears it up. I'm on a D801 (TMO) and first noticed this about three weeks back.
Rebooting the phone seemed to clear it up at least for the short term. I just noticed that the Google search app updated on the phone about two/three weeks back. Seems about the same time I started noticing the issue.
I had a backup of Google search 4.1.29 from back in January. Just restored that version and blocked it from updating to see if the issue comes back again.
Interesting to see this is also on the d802. Mine is the VS980.
The 13qcelp trick does not fix it. So tired of this!
Any other tricks out there??
Happened twice in one day. New record for me. Sick of people saying "hello?? Anyone there??? Hello??" until i turn speakers on. With speakers sound is horrible so really annoying! Wonder if issue will happen with AOSP/CM roms.....
Sent from my LG-D802

Incoming Calls / Black Screen ?

Not sure why but after the last system update the phone will only come out of black screen sleep mode if I use the fingerprint sensor when theres an incoming call.
Any Ideas ?
This happened to me today too.
Hello, me too! Oreo Beta 2
Anyone ?
going_home said:
Anyone ?
Click to expand...
Click to collapse
Not me, I've never experienced this issue since I got the phone from N then updated to OB2, and now OB3.
Sounds like the proximity sensor may have an issue.
Do you have a screen protector or case?
I don't have that issue with a screen protector and Tudia case and B3.
It's a bug in the latest Google Dialer app. I fixed it be deinstalling the new version/updates then clearing cache and data in the dialer app. It's affecting the Pixel2 XL running 8.1 also. Fixed my issue and I won't let it install the newer dialer version from the play store
In Beta 3, I haven't experienced that problem. I did heavily on 7.1.1
Just got another update and still having black screen on incoming calls....
I'm about ready to ditch this phone and get a Pixel 2 XL.
I read where Essential is skipping the 8.0 update because of instability and going straight to 8.1.
going_home said:
Just got another update and still having black screen on incoming calls....
I'm about ready to ditch this phone and get a Pixel 2 XL.
I read where Essential is skipping the 8.0 update because of instability and going straight to 8.1.
Click to expand...
Click to collapse
happened to me last week too.. it only happened after I locked the phone, 5-10 minutes later incoming call or when unlocking the phone the phone shows back screen only for a few seconds then it went back to normal.
the problem went away after I turned off the bluetooth radio.
I've been having this issue for a while now and just today I figured out the cause. At least the cause of my specific issue. I came here to see if anyone else is having similar issues so I'll explain exactly where I'm at.
If a Bluetooth headset is connected to my phone, when a call comes in the screen stays black and I can't see who's calling. If I turn off, or disconnect the BT device, when a call comes in the screen lights up with caller ID like normal. This also affects the missed call notification that happens after a missed call. With a BT device connected, the missed call notification will not show until I wake the phone with the power button, though the notification LED will light.
I'm on stock 7.1.1 and I verified that this is also an identical issue with two other phones which were not on a stock ROM, though I can't remember what they were running. This started happening to me before the NMK24B update. I remember because I was hoping that the update would fix it. I believe it started with NMJ88C because I got my phone on NMJ32F, it updated to NMJ51B shortly after and it was fine in the beginning months.
DrvLikHell said:
I've been having this issue for a while now and just today I figured out the cause. At least the cause of my specific issue. I came here to see if anyone else is having similar issues so I'll explain exactly where I'm at.
If a Bluetooth headset is connected to my phone, when a call comes in the screen stays black and I can't see who's calling. If I turn off, or disconnect the BT device, when a call comes in the screen lights up with caller ID like normal. This also affects the missed call notification that happens after a missed call. With a BT device connected, the missed call notification will not show until I wake the phone with the power button, though the notification LED will light.
I'm on stock 7.1.1 and I verified that this is also an identical issue with two other phones which were not on a stock ROM, though I can't remember what they were running. This started happening to me before the NMK24B update. I remember because I was hoping that the update would fix it. I believe it started with NMJ88C because I got my phone on NMJ32F, it updated to NMJ51B shortly after and it was fine in the beginning months.
Click to expand...
Click to collapse
I had the black screen issue as well for incoming calls. I just switched to Drupe Dialer from the Play Store and set that as my default dialer. Now my screen lights up with the incoming caller ID and works as it should. By the way, hate to sound like an add, but Drupe Dialer is just awesome and has a ton of functionality, give it a shot. I know that's not the perfect answer as we would expect the native Android dialer to work out of the box with our OS, but it is what it is.
Jank4AU said:
I had the black screen issue as well for incoming calls. I just switched to Drupe Dialer from the Play Store and set that as my default dialer. Now my screen lights up with the incoming caller ID and works as it should. By the way, hate to sound like an add, but Drupe Dialer is just awesome and has a ton of functionality, give it a shot. I know that's not the perfect answer as we would expect the native Android dialer to work out of the box with our OS, but it is what it is.
Click to expand...
Click to collapse
I tried two other dialers and it didn't make a difference on my phone. Drupe did work to make the screen show who's calling again, but wow, Drupe has too much.... just, everything. All I want in a dialer is basic functions in a standard format. Drupe is like a carnival of a dialer. I'll keep trying dialers though, since that one did work, maybe another one will too. Thanks for the suggestion.
Yeah, if you just take the Drupe dialer phone icon and put that on your home screen, whenever you select it you'll go right to the normal looking dialer. :good:You may want to try ExDialer. That used to be one I'd use a lot.
Jank4AU said:
I had the black screen issue as well for incoming calls. I just switched to Drupe Dialer from the Play Store and set that as my default dialer. Now my screen lights up with the incoming caller ID and works as it should. By the way, hate to sound like an add, but Drupe Dialer is just awesome and has a ton of functionality, give it a shot. I know that's not the perfect answer as we would expect the native Android dialer to work out of the box with our OS, but it is what it is.
Click to expand...
Click to collapse
Before using Drupe...
There should be a warning that goes out to all your contacts saying "I'm about to completely betray you and share EVERYTHING about you online with a company I know nothing about... Please enjoy these spam calls on me"
Sent from my PH-1 using Tapatalk
rignfool said:
Before using Drupe...
There should be a warning that goes out to all your contacts saying "I'm about to completely betray you and share EVERYTHING about you online with a company I know nothing about... Please enjoy these spam calls on me"
Click to expand...
Click to collapse
10 million downloads...good enough for me. I've used it for a long time and it's been better for me than the stock dialer. Just my opinion, no one has to use it but it sure beats a black screen when the phone rings.
I have the same problem on the pixel 2 xl. And so do lots of others. I uninstalled the phone update from the play store, and turned off auto update. So far so good. And I am on 8.1 But we will see. And it only happens when I'm on Bluetooth. Unfortunately I use it all the time for work
Sent from my Pixel 2 XL using Tapatalk
I read about some people being able to fix it by uninstalling dialer updates. Unfortunately, the Essential doesn't have any to uninstall. I'm working around it by using Drupe as my default dialer, but setting the stock dialer as the default app for dialing, if that makes any sense (When an event pops up that requires the dialer, it asks which dialer to use, I selected the stock dialer and told it always use that.) This way incoming calls trigger Drupe, which acts the way it's supposed to on Bluetooth, but I can still use the stock app for making calls and missed calls and such.
bricky23 said:
I have the same problem on the pixel 2 xl. And so do lots of others. I uninstalled the phone update from the play store, and turned off auto update. So far so good. And I am on 8.1 But we will see. And it only happens when I'm on Bluetooth. Unfortunately I use it all the time for work
Click to expand...
Click to collapse
Yeah, I'm thinking there's a Bluetooth issue (yeah,I know, news flash). But it's been widely reported that some folks are having trouble connecting to their cars Bluetooth. I use a Bluetooth adapter in my car and wireless headphones in the office. No real big issues connecting, but it can be finicky. However, once an event triggers Bluetooth, like streaming a song with Google Play to the adapter, my phones volume buttons become unresponsive. I can only change volume by going into the settings menu or from the Bluetooth device. Sucks. Waiting for the 8.1 beta to do a total clean install. Just bought the device used from Swappa and it came with beta 3 installed, not 100% sure the steps it took getting here. I guess what I'm asking is, does anyone else experience issues with their volume buttons not working occasionally?
Jank4AU said:
Yeah, I'm thinking there's a Bluetooth issue (yeah,I know, news flash). But it's been widely reported that some folks are having trouble connecting to their cars Bluetooth. I use a Bluetooth adapter in my car and wireless headphones in the office. No real big issues connecting, but it can be finicky. However, once an event triggers Bluetooth, like streaming a song with Google Play to the adapter, my phones volume buttons become unresponsive. I can only change volume by going into the settings menu or from the Bluetooth device. Sucks. Waiting for the 8.1 beta to do a total clean install. Just bought the device used from Swappa and it came with beta 3 installed, not 100% sure the steps it took getting here. I guess what I'm asking is, does anyone else experience issues with their volume buttons not working occasionally?
Click to expand...
Click to collapse
My volume buttons always work fine, BT or otherwise. Stock 7.1.1. Your issue could very well be related to OB3. I had a little bit of an issue connecting/reconnecting to some BT devices at first, but not lately, so it must have been fixed in the last few patches.

Anybody missing calls?

Some of my incoming calls directly goes to voicemail without ringing.. mostly at night..I have turned off all battery optimizations...Any one have noticed this? I did multiple factory resets... I am using xXX mod, not sure if that can be reason in anyway...
I've noticed this too, quite a lot. I've got Google voice so it tells me I had a missed call, and can see it on my browser ringing, but not on the phone...
compuw22c said:
I've noticed this too, quite a lot. I've got Google voice so it tells me I had a missed call, and can see it on my browser ringing, but not on the phone...
Click to expand...
Click to collapse
Do you have any mods installed like xXx?

Categories

Resources