hello
its a quick question, the title says it all, my led stopped working and i want to replace it since im using it all the time. does someone know if this is a lot of work doing, i know how to work on electrik boards.
What led do i need and what screwdrivers if so ?
Best Regards
Bjørn Ivar
DjChain
djchain said:
hello
its a quick question, the title says it all, my led stopped working and i want to replace it since im using it all the time. does someone know if this is a lot of work doing, i know how to work on electrik boards.
What led do i need and what screwdrivers if so ?
Best Regards
Bjørn Ivar
DjChain
Click to expand...
Click to collapse
I'd like to know this too, know people who's have gone out....
Related
Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on
hello guys., still no way to use the wizard as flashlight? tnx in advance, -storm
Is this what you want?
http://www.vijay555.com/index.php?Releases:VJCandela
Be careful with it though. I've heard people have ruined the camera flash by over using this. Vijay555 has even modified the page to say it will damage your flash led...
Personally I just set my screen to not go off for 2 minutes, and that works as a really bright flashlight Sure, uses more power, but I"M not using it for long periods of time usually.
thanks but this isn't working for the wizard
i know vj was at working about this some months ago but i didn't receive any news about it.....so i'm guessing still no way to use our lovely wizard as torch
stormwind said:
thanks but this isn't working for the wizard
i know vj was at working about this some months ago but i didn't receive any news about it.....so i'm guessing still no way to use our lovely wizard as torch
Click to expand...
Click to collapse
I just use the screen as a flashlight.
--M
yeah but have u tried the flash? it's simply amazing and light 200 times the normal display even with just white screen!
hope they will find a solution too!!
stormwind said:
yeah but have u tried the flash? it's simply amazing and light 200 times the normal display even with just white screen!
hope they will find a solution too!!
Click to expand...
Click to collapse
It always amazes me what kind of needs people have! The WIZ makes a quite expensive flashlight. Every key chain pocket flash light has better light and is more handy to use!
...keep The World In One! (qtek)
I dont now? are they of? It is on my phone wrong rom? hause something light but do not work. thanks I am sorry my eanglish is bad
We need more info. What Rom are you running? It sounds like a kernel issue.
2.1 t-mobile. I owned the TG01 so is still in the androids do not know much. I just think there any other buttons can be activated in settings or can new ROM fix??
only (house,menu) button lights but do not work. And all screen works perfect
thanks
I say it's time to break out ODIN and see if that fixes. Makes sure you backup all your info.
Hi there,
I would love some help fixing my soft bricked S4.
It turns on and boots up but it has the semi transparent grey box with yellow information on it on home screen.
I can make calls and the IMEI is fine.
I've found some some help regarding this issue on the S3 forums but not here.
Is it the same procedure as in the S3? I don't want to use the same commands incase I mess something up.
I don't want to cause more harm so if someone could help I wuold be very greatful
Obagleyfreer said:
Hi there,
I would love some help fixing my soft bricked S4.
It turns on and boots up but it has the semi transparent grey box with yellow information on it on home screen.
I can make calls and the IMEI is fine.
I've some some help regarding this issue on the S3 forums but not here.
Is it the same procedure? and the same ADB commands?
I don't want to cause more harm so if someone could help I wuold be very greatful
Click to expand...
Click to collapse
Maybe this thread will help you.
http://forum.xda-developers.com/showthread.php?t=2335692
Thanks I'll give it a bash tonight. Doesn't look hopeful though!
Obagleyfreer said:
Thanks I'll give it a bash tonight. Doesn't look hopeful though!
Click to expand...
Click to collapse
Sry bro, good luck with that though.
Hey guys,
i have an old HTC One S here at home with a broken screen (completely broken and black). I've already removed the screen to replace it some day because i dont really need the phone.
But i was thinking maybe to use it as a little "Raspberry Pi" or whatever. Only problem is, i dont see anything :
The phone itself is fine so its possible to turn it on as far as i know. Still vibrates and the softkey leds and the one on the top are working too when i charge it or try to turn it on.
So my question now is if there is a possibility to use my pc as an external display via USB?
I am not a crack in Android, the phone even wasnt mine (from my sister) so i dont think its rooted or anything.
Does someone have an idea and can help me with that little project?
Thanks
(sry for my english )
Hm, no one an idea?
Fraqq said:
Hm, no one an idea?
Click to expand...
Click to collapse
Hi!
w w w.howtogeek.com/howto/42491/how-to-remote-view-and-control-your-android-phone/
I hope this help
Thanks. Does not seem to work. I think the problem is, i cannot enter usb storage mode on the device so my pc does not recognize the phone. It is only charging.
Anyway, i ordered a new display and hopefully its worth it
Its 100 €
But thanks anyway.
Fraqq said:
Thanks. Does not seem to work. I think the problem is, i cannot enter usb storage mode on the device so my pc does not recognize the phone. It is only charging.
Anyway, i ordered a new display and hopefully its worth it
Its 100 €
But thanks anyway.
Click to expand...
Click to collapse
This is the best what you can do - save the Earth from the electronic waste!
Good luck with the new screen!