Database Users

Flashing just modem with Odin

Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.

You can use heimdal and just flash the modem.bin directly
Sent from my GT-I9000 using Tapatalk

creat0r79 said:
And I'd welcome info on how to flash it, should I put it in the phone field?
Click to expand...
Click to collapse
Don't put it in a TAR file. Just flash the modem.bin directly. Put it in the "PHONE" box. Make sure Repartition is unchecked and no other fields are filled.
After it's done, go to About to verify it flashed correctly. (Look at Baseband)

Done, running JPU modem on stock JPY...seems to also boot faster now
Thank you.

Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.

creat0r79 said:
Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.
Click to expand...
Click to collapse
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.

cs_k said:
Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.
Click to expand...
Click to collapse
not required
seltaeb said:
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.
Click to expand...
Click to collapse
they r not flashing .zip they are flashing modem.bin in ODIN. It works.

OMG I have an EMERGENCY... please help, I've searched for hours. :-(

So I am not to NOOB but I sure acted like it last night when I was way tired and tried to flash a ROM. Here is what I did...
I didn't catch that I didn't have the CWM but that I had booted into the stock recovery tool... Well I didn't before it was to late that is...
I clicked WIPE DATA
I clicked WIPE CACHE
Then noticed there was no "install from SD"
So it seems like whatever I find to install from ODIN I can't get the CWM to install so I can then flash a ROM!
I need my phone up for work, I am in HOT SH!T!
How can I either flash a rom via stock recovery "update format" OR install CMW via ODIN?
PLEASE HELP ASAP!!
Thank you

why don't you just flash again via odin and then root your phone via odin as well?

Don't quite understand whats your problem. So what if you wiped data and cache the rom is still there. Reboot normally and flash cfroot according to your firmware and then you should have cwm up and running. After that flash desired rom and the end.
Sent from my GT-I9100 using xda premium

Flash one of the CF-Root kernels through Odin, whichever one matches the firmware you're running. They have CWM baked in, along with root so you can flash a ROM afterwards.
If you can't get into download mode, turn your phone off, plug it in and hold down + power + home and it should boot into download mode. Then you can flash with Odin.

I thought the same thing, that so what that I wiped them... but when I rebooted the phone it just sits at the "Rethink possible screen"

I can get into download mode and I did find the "cf" post but I dunno what kernel I am running as I can't boot to go into settings to seek.

if you in recovery mod choose reboot, and it will be ok, than read: http://forum.xda-developers.com/showthread.php?t=1103399,
or put in download mod: turn your phone off, hold down + power + home. Then flash with Odin.

I know you probably don't want to, but you can try doing a factory reset, that should allow you to get your phone up and running. If you have gmail installed it should put all your contacts back, as long as you backed up to gmail.
If you have an old copy of titanium backup you won't loose ALL your apps, this is why I tend to back up every weekend, I'm only a week behind with everything if problems arise....
Cheers...

Flash stock rom... Download cwm and flash with odin.... Then instal rom u want with cwm...
Sent from my GT-I9100 using xda premium

like I said, I am not a noob, just made a mistake...
I found the cf-kernel page, but I dunno what kernel I am running and so I dunno what kernel to flash (It seems vital)
"just rebooting" don't work lol I wish... it hangs at the "rethink possible" boot screen...
I was rooted but running the stock rom, if I can get CWM installed I think I will be golden, but whatever I seem to flash from ODIN don't work :-( no matter what nothing will flash as "PDA" but when I flash using "phone" it seems to install "zimage" which is the embedded file and succeeds and phone reboots... but still only to the rethink possible point.

flash any stock firmware then flash supercore 2.0 and do whatever you want from there

Think i know what the problem is,i have same issue sometimes,try flashing anogher rooted Kernel through odin,make sure its like if the rom is a kj3 that it has a kj3 kernel.see if that works

ultramag69 said:
you can try doing a factory reset... Cheers...
Click to expand...
Click to collapse
Be glad to but it isn't an option in the recovery?
My options are as follows...
Reboot system now
Apply update from SD
Wipe/reset
Wipe/cache

been in similar, if not same situation, things were missing from cwm recovery, like you wrote...if memory serves me fine,
flash stock fw with pit, repartition and everything...
then some rootec kernel with recovery...

Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(

let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and find FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.

abovenbeyond said:
Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(
Click to expand...
Click to collapse
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?

borstri said:
let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and fin FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.
Click to expand...
Click to collapse
Sounds amazing but after my post above I not can't get the phone to power on although I hear the laptop detect it as I attempt to power down or up, but no screen or led display...
Really worried now... ****!

Lennyz1988 said:
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?
Click to expand...
Click to collapse
I flashed this...
Download a PIT file for the I9100
Download EXT4.pit file (2KB)
(for the S2 only)

battery pullout, then three button combo for download

[Q] Rooted phone - can't flash rom and forgot to backup.

Hello, I rooted my galaxy 4 yesterday with odin v.3.07 and flashed CWM. I erased as usual when you flash another rom, but when i try to install a rom it just say something like "Aborted". I can access CMW and download mode, but can't install a rom from CMW, and I don't have any backup. Anybody know what to do? My computer knows that the phone is plugged in as i can see it in the odin program.

SelassieI said:
Hello, I rooted my galaxy 4 yesterday with odin v.3.07 and flashed CWM. I erased as usual when you flash another rom, but when i try to install a rom it just say something like "Aborted". I can access CMW and download mode, but can't install a rom from CMW, and I don't have any backup. Anybody know what to do? My computer knows that the phone is plugged in as i can see it in the odin program.
Click to expand...
Click to collapse
Hi,
Try flashing a stock ROM.

malybru said:
Hi,
Try flashing a stock ROM.
Click to expand...
Click to collapse
§
Could you give me a link please? I'm afraid of downloading the wrong stock file since my internet is so slow hehe. My phone is model number: i9505. Do i flash it inside CMW or with Odin? I read something about flashing with odin, but on my other phone i've always used CMW

SelassieI said:
§
Could you give me a link please? I'm afraid of downloading the wrong stock file since my internet is so slow hehe. My phone is model number: i9505. Do i flash it inside CMW or with Odin? I read something about flashing with odin, but on my other phone i've always used CMW
Click to expand...
Click to collapse
Hi,
You will need to find the right one for your phone HERE
You must know the area your phone came from.
These seem to be zips,so flash with CWM.

malybru said:
Hi,
You will need to find the right one for your phone HERE
You must know the area your phone came from.
These seem to be zips,so flash with CWM.
Click to expand...
Click to collapse
Thank you, I found it. But when i tried to install roms with CWM before it just said "Aborted", maybe their is something wrong with CWM. I read something about installing with Odin, but then i'll need a .tar file or something like that

SelassieI said:
Thank you, I found it. But when i tried to install roms with CWM before it just said "Aborted", maybe their is something wrong with CWM. I read something about installing with Odin, but then i'll need a .tar file or something like that
Click to expand...
Click to collapse
You have to unzip this file and install the content with Odin.
After unzipping this archive you should end up witch md5 file and this is the file to put in to Odin

SelassieI said:
Thank you, I found it. But when i tried to install roms with CWM before it just said "Aborted", maybe their is something wrong with CWM. I read something about installing with Odin, but then i'll need a .tar file or something like that
Click to expand...
Click to collapse
Hi,
Maybe try installing a different recovery.
I heard sometimes these new recoveries need more than one go to install things.

Thank you, problem solved =)

Sprint s4 sph-l720 help!!!!

Ok so I was running CM 11 while i was on MK2 firmware....i flashed a wrong file now i am stuck, I can get into download mode.
My device is Sprint Galaxy S4 running the MK2 firmware, but i have no idea where to go because it will not boot up anymore and only goes into download mode, any ideas on how to fix?
Thanks

i flashed a wrong file now i am stuck
Click to expand...
Click to collapse
Boy that could be bad...
BUT if you get to Download mode you may be able to grab the full MK2 Odin-able .tar you should be Okay.
Please note that the sph-L720 is NOT the L720T. If you have that version and you flash this .tar you'll be hosed.

leaderbuilder said:
Boy that could be bad...
BUT if you get to Download mode you may be able to grab the full MK2 Odin-able .tar you should be Okay.
Please note that the sph-L720 is NOT the L720T. If you have that version and you flash this .tar you'll be hosed.
Click to expand...
Click to collapse
Ok thanks, i will try this and let you know later after its all downloaded and what happens!

RogSeve said:
Ok thanks, i will try this and let you know later after its all downloaded and what happens!
Click to expand...
Click to collapse
Make sure to Run Odin 'as administrator'.
From the zip just extract the .tar.md5 and place that into the PDA slot. Odin 3.09 seems to be working the best for most on this device.

leaderbuilder said:
Make sure to Run Odin 'as administrator'.
From the zip just extract the .tar.md5 and place that into the PDA slot. Odin 3.09 seems to be working the best for most on this device.
Click to expand...
Click to collapse
Yup just downloaded that odin actually, but i have to wait about an hour for that mk2 file to download. And thanks i know I've actually done this before but on mf9 so it was a little easier. Will this bring me back to stock?
Thanks

RogSeve said:
Yup just downloaded that odin actually, but i have to wait about an hour for that mk2 file to download. And thanks i know I've actually done this before but on mf9 so it was a little easier. Will this bring me back to stock?
Thanks
Click to expand...
Click to collapse
You'll be stock everything - baseband(modem), kernel, recovery and ROM.
You will have the knox bootloader, so when you flash a custom recovery you'll 'trip' that. But not really a big deal. You can remove the 'Knox software(s) if you want - there are some removal scripts here in the forums. Only thing is you can't Odin back before MJA/MK2.
To root you can use CF-Autoroot or Saferoot, then use Goomanager or find a recovery zip here and install custom recovery of your choice.

leaderbuilder said:
You'll be stock everything - baseband(modem), kernel, recovery and ROM.
You will have the knox bootloader, so when you flash a custom recovery you'll 'trip' that. But not really a big deal. You can remove the 'Knox software(s) if you want - there are some removal scripts here in the forums. Only thing is you can't Odin back before MJA/MK2.
To root you can use CF-Autoroot or Saferoot, then use Goomanager or find a recovery zip here and install custom recovery of your choice.
Click to expand...
Click to collapse
Ill try that later if it works, i might just stay on stock mk2 don't wanna mess anything else up....lol

RogSeve said:
Ill try that later if it works, i might just stay on stock mk2 don't wanna mess anything else up....lol
Click to expand...
Click to collapse
Ok so now when i try to open it up in odin it says hash value is invalid....any ideas on what to do for that?

leaderbuilder said:
You'll be stock everything - baseband(modem), kernel, recovery and ROM.
You will have the knox bootloader, so when you flash a custom recovery you'll 'trip' that. But not really a big deal. You can remove the 'Knox software(s) if you want - there are some removal scripts here in the forums. Only thing is you can't Odin back before MJA/MK2.
To root you can use CF-Autoroot or Saferoot, then use Goomanager or find a recovery zip here and install custom recovery of your choice.
Click to expand...
Click to collapse
Ok when i try to open the mk2 file it keeps saying the md5 hash is invalid. Ive tried 3 different odins to open it and i get the same result..

You don't open the .tar.md5 file.
You place this file - L720VPUEMK2_L720SPTEMK2_L720VPUEMK2_HOME.tar.md5 in the PDA slot.

RogSeve said:
Ok so I was running CM 11 while i was on MK2 firmware....i flashed a wrong file now i am stuck, I can get into download mode.
My device is Sprint Galaxy S4 running the MK2 firmware, but i have no idea where to go because it will not boot up anymore and only goes into download mode, any ideas on how to fix?
Thanks
Click to expand...
Click to collapse
have you tried heimdall? its unbricked me a few times, and its way easier to use too. i think you can use ob both windows and mac, i used on mac. if you are familiar with how to use a command line tool or terminal, this is the way to go. just my humble opinion.

Looking for stock recovery for i9515

Hello,
I am looking for the stock recovery for the i9515.
Or can I just use the i9505 stock recovery for it?
Thanks in advance!

nonoway2 said:
Hello,
I am looking for the stock recovery for the i9515.
Or can I just use the i9505 stock recovery for it?
Thanks in advance!
Click to expand...
Click to collapse
I would only ever use the suggested recovery options, NEVER use a different model in your phone.
http://www.sammobile.com/firmwares/
Click that link, type in the "Find device" search box and input GT-i9515 and you actually get a lot of stock roms. Because it's from Samsung it is all official. You will need to find Odin 3.09 and a helpful guide to aid in the procedure, all current information will be lost on your device and will bring it back to stock (except perhaps the flash counter, which can be reset with Triangle Away)
As always, do as much research as you can before going ahead with any potentially dangerous changes!
Good luck

irscotty said:
I would only ever use the suggested recovery options, NEVER use a different model in your phone.
Click that link, type in the "Find device" search box and input GT-i9515 and you actually get a lot of stock roms. Because it's from Samsung it is all official. You will need to find Odin 3.09 and a helpful guide to aid in the procedure, all current information will be lost on your device and will bring it back to stock (except perhaps the flash counter, which can be reset with Triangle Away)
As always, do as much research as you can before going ahead with any potentially dangerous changes!
Good luck
Click to expand...
Click to collapse
I actually did use a CWM recovery option that wasn't specifically for the i9515 but for the 9500 or the 9505. I do not remember which one of both of these I did use though and I do not want to take that risk again.
So this will also reset my ROM and wipe all data? That is not what I am looking for unfortunately. I am looking for solely the stock recovery menu. Everything else should stay as it is. Isn't that possible?

nonoway2 said:
I actually did use a CWM recovery option that wasn't specifically for the i9515 but for the 9500 or the 9505. I do not remember which one of both of these I did use though and I do not want to take that risk again.
So this will also reset my ROM and wipe all data? That is not what I am looking for unfortunately. I am looking for solely the stock recovery menu. Everything else should stay as it is. Isn't that possible?
Click to expand...
Click to collapse
As far as I'm aware the only solution to remove the Custom Recoveries is to flash stock firmware via Odin, I could be wrong but I've never heard of it.
Sorry I can't help further, best of luck with your predicament.

bump

nonoway2 said:
I actually did use a CWM recovery option that wasn't specifically for the i9515 but for the 9500 or the 9505. I do not remember which one of both of these I did use though and I do not want to take that risk again.
So this will also reset my ROM and wipe all data? That is not what I am looking for unfortunately. I am looking for solely the stock recovery menu. Everything else should stay as it is. Isn't that possible?
Click to expand...
Click to collapse
No it will not wipe your device. Just pick the stock rom that is for your device.

nonoway2 said:
bump
Click to expand...
Click to collapse
+1 with lennyz1988
Just flash the stock rom
"If someone helps, never forget to hit thanks ? "

I can't flash the stock rom because I want to keep a modified rom and yet still have the stock recovery.
If you care why: Cerberus anti-theft rom.
So I need a way to keep everything but the recovery. That one has to go back to stock so no thiefs suspect custom roms when doing a hard reset and seeing CWM Recovery.

Bump

Bump,
no one got an idea?

Well then just download the official firmware and extract recovery.img. Then flash it using terminal or heimdall.

Lennyz1988 said:
Well then just download the official firmware and extract recovery.img. Then flash it using terminal or heimdall.
Click to expand...
Click to collapse
Oh I did not know files inside the firmware files were seperated.
Why Terminal or Heimdall and not Odin?
Edit: Can't find a file for recovery in firmware from here: www.sammobile.com/firmwares/

nonoway2 said:
Oh I did not know files inside the firmware files were seperated.
Why Terminal or Heimdall and not Odin?
Edit: Can't find a file for recovery in firmware from here: www.sammobile.com/firmwares/
Click to expand...
Click to collapse
You'll have to get the whole damn firmware.
"If someone helps, never forget to hit thanks ? "

DeepankarS said:
You'll have to get the whole damn firmware.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I gotta be really stupid or I am overseeing something.
I got the whole 1,6gb firmware.
It has this file in it: "I9515XXU1ANI2_I9515VFG1ANI1_I9515XXU1ANI2_HOME.tar.md5" I tried changing the .md5 to .zip but it only showed me a few files inside it then that did not include a recovery file. Emulating the .md5 file with daemon tools didn't work either.
I don't know how to find the recovery file in it.

Bump

nonoway2 said:
I gotta be really stupid or I am overseeing something.
I got the whole 1,6gb firmware.
It has this file in it: "I9515XXU1ANI2_I9515VFG1ANI1_I9515XXU1ANI2_HOME.tar.md5" I tried changing the .md5 to .zip but it only showed me a few files inside it then that did not include a recovery file. Emulating the .md5 file with daemon tools didn't work either.
I don't know how to find the recovery file in it.
Click to expand...
Click to collapse
Hi
Rename your .md5 firmware in .tar, then open it with winrar, and extract the kernel called "boot.img".
Then flash it with "mobile odin" in your phone.

Hey,
thanks for your help, but there is also a recovery.img. I guess I will flash that one and not the boot.img one if I want to have the stock Recovery, shouldn't I?

nonoway2 said:
Hey,
thanks for your help, but there is also a recovery.img. I guess I will flash that one and not the boot.img one if I want to have the stock Recovery, shouldn't I?
Click to expand...
Click to collapse
correct.

Alright then, wish me luck, I will try it this evening.
Edit: already did it quickly. Worked perfect! Now I have the stock Recovery back and just the Cerberus ROM installed. Perfect. May these thieves come if they dare... They won't realize at all that there is something integrated in this ROM.
I used RashR by the way.

nonoway2 said:
Alright then, wish me luck, I will try it this evening.
Edit: already did it quickly. Worked perfect! Now I have the stock Recovery back and just the Cerberus ROM installed. Perfect. May these thieves come if they dare... They won't realize at all that there is something integrated in this ROM.
I used RashR by the way.
Click to expand...
Click to collapse
Also just for knowledge..boot.img has the kernel
"If someone helps, never forget to hit thanks ? "