I want to set up my Windows 7 system as an access point (ad hoc, I suppose) so that I can connect my tablet via wifi and use the Window system's network access.
I used the ad hoc network wizard, but the tablet could not see it, and could not be force it to hook up.
Has anyone been successful at this?
Sent from my SCH-I800 using XDA App
i dun know but i hope u will have the way to do this
I was just working on this the other night, so I'll answer your question and pose a second.
Go grab the 'Connectify' program. That'll make the setup a snap.
Here's the problem, though.... Hoping some of the keen XDA minds might be able to help. The 'SoftAP' that windows 7 has built in will ONLY set itself up with WPA2 security. This makes it teasingly close to allowing Nintendo DS and PSP connections since it's setting itself up as an Infrastructure Access point, but only with security too strong for those platforms.
Does anyone here have an Idea of how to force/hack Win7 to use a lower form of security like WPA or WEP?
Would love to get an answer to above users question
Sent from my HERO200 using XDA Premium App
Once i was blind, now i can see !
Thank you for this, i had problems with 3g at my work, now i have wifi!
After some additional research, I found out that this WPA2 'lock' is actually a part of the Win7 certification for a given WiFi device.
This would seem to indicate that it would be either part of the driver or hard-coded into the device itself.
A driver seems like it could be something that'd be edited to be more pliable with regards to Wifi protection, but if it's hard-coded, we're likely screwed.
Any info pertaining to using Windows XP Pro with any of this. I run on Revol Wireless with my Hero200,I flashed the phone to their network so I dont have full network access. Anyways...I'm trying to reverse tether at home to use the net on my phone where my network is connected through my desktop pc. I'm running a Dell Dimension 4600 with XP Pro strictly as my DEV computer. This comp only gets Android crap on it all the time. A few windows things here and there but I need the windows programs for the android stuff so...Any help is VERY greatly appreciated guys!
andy_lowe02 said:
Any info pertaining to using Windows XP Pro with any of this. I run on Revol Wireless with my Hero200,I flashed the phone to their network so I dont have full network access. Anyways...I'm trying to reverse tether at home to use the net on my phone where my network is connected through my desktop pc. I'm running a Dell Dimension 4600 with XP Pro strictly as my DEV computer. This comp only gets Android crap on it all the time. A few windows things here and there but I need the windows programs for the android stuff so...Any help is VERY greatly appreciated guys!
Click to expand...
Click to collapse
dude...you will have stability problems and protocols relevent issues on using connectify
some times u'll get blue screen errors too.
So,after googling a lot i hav found "mhotspot" we dont even need to install the software,but it creates a virtual access point and enables wifiinternet sharing
working great..
try it here....www. mhotspot .com
Related
I wonder if anybody could help me? What it is, is that I am disabled. My fingers are paralysed, and so working the intricate parts of the XDA is quite difficult. It is not impossible, but it is hard.
I also have several friends who are in the same situation as me. 12 months ago they were given xda 2 each for free. None of them have used them much because they are difficult to use, because they are stuck in their ways, and because I don't think they really realise the full potential of these little devices. It has took me 12 months to get hold of one of these, but just within a few days I'm quite bowled over with the potential.
So I wonder if somebody would be prepared to lead me through making the most of my XDA, with my disabilities, so I can also share this knowledge with the other disabled guys who also have this Pocket PC?
The first thing I want to do is set up the basic software, to maximise connectivity with my home network. I have already started this, and had some help in this direction on this forum, but I am still a bit stuck.
I have loaded this Pocket PC software onto my xda 2 http://forum.xda-developers.com/viewtopic.php?t=17410&highlight=jojo . I have windows XP on my desktop computer. This is hardwired to a 3Com wireless router. I have bought a SDIO wireless LAN card. When you install the software, it virtually sets its self up, the connection displays itself, you select it and have a choice between a Internet connection or a work connection. If I choose work, I am able to connect to the Internet and surf the Internet, but I am not able to do an active sync. I have gone into my start menu/settings/connections/network card/network adapters/socket WLAN SDIO V1 driver /name server and set the WINS to the IP address of the computer I want to connect to as somebody suggested to me, but it doesn't work. I also cannot see the other shared directories on my computer's on the network. (I do have Norton security on, but I have tried these with Norton security disabled.)
Can anyone make a suggestion?
Thanks in anticipation, funny keyboard.
Hello guys,
I want to see how secure my wireless network is for someone who is using a PPC, so I have been searching for any software that will allow me to crack my encryption but so far I have not managed to find anything. I have found a few software that crack encryptions both on Windows and Linux, but none on Windows Mobile.
Any of you know any software?
Thank you.
evolish said:
Hello guys,
I want to see how secure my wireless network is for someone who is using a PPC, so I have been searching for any software that will allow me to crack my encryption but so far I have not managed to find anything. I have found a few software that crack encryptions both on Windows and Linux, but none on Windows Mobile.
Any of you know any software?
Thank you.
Click to expand...
Click to collapse
What a bizarre request If you've got a wireless network, set the router encryption to the strongest setting your PC's/PPC's will support and use the cracking tools on a Windows PC to test it. If you've got security and MAC filtering on the router, you're doing about the best you can anyway.
Trying to crack wireless security on a PPC is gonna be slow as - the Hermes only has a 400MHz processor, so it'll probably take four or five times (or more) longer to crack the security as it would if you did it on a desktop PC. The only software I know of that might work is MiniStumbler - kinda like the baby brother of NetStumbler, from http://www.netstumbler.org
My advice is this , give it up as a bad job, or make sure your PPC is permanently on charge coz the battery life will be crap with the WiFi on and packet capture/cracking tools running
Cheers,
Mark.
Great Mark I will try and see what happens with the software you told me as soon as I get a chance. Thank you.
Anyone else who knows a different way.. is welcome to say
Download the backtrack ISO LiveCD and run it on a laptop or PC which has a supported wireless device. That LiveCD comes with a suite of wifi cracking apps which you can use to penetration test your wireless network if you thusly desire.
Doesn't work with many Acer laptops though due to something stupid with the Acer motherboard design (and guess what laptop I have! haha)
I use CM_InternetSharing app on my WM mobile phone to create a hot spot. The software works great and all my Windows pc's & my brothers iPad find my cell phone and gain a internet connect but the Elocity A7 does not connect. The Elocity A7 does connect to my home network but it does not find the mobile hot spot.
Note: WiFi Analyzer finds my WM phone but I can't connect - So I guess it has to do something with the WEP encryption between WM & Andriod in obtaining a IP.
My elocity is on build 0127.
Any ideas?
I have to install the adhoc-fix.zip by dexter on to see my hotspot I have a hotspot on my virgin mobile phone . do a search here on the forum for adhoc-fix.zip and it will give you the link. You rename it to update.zip and install like the mods on the a7 but you do not have to clear stuff.
ninetoes49
I found the adhoc-fix.zip. Did you apply this using recovery? Ie. rename to update.zip.
I also seen that someone mention to execute a chmod on a file. Do you know how to get keyboard in command prompt mode?
dkcarmona said:
I found the adhoc-fix.zip. Did you apply this using recovery? Ie. rename to update.zip.
I also seen that someone mention to execute a chmod on a file. Do you know how to get keyboard in command prompt mode?
Click to expand...
Click to collapse
yes just apply using recovery. I dont know about the other.
Well I applied the adhoc-fix.zip. It got me closer. I can see my phone broadcasting SID XDA-Wifi-Sharing but it won't obtain a IP address. -- Thanks. I'll keep looking
dkcarmona said:
Well I applied the adhoc-fix.zip. It got me closer. I can see my phone broadcasting SID XDA-Wifi-Sharing but it won't obtain a IP address. -- Thanks. I'll keep looking
Click to expand...
Click to collapse
I run the barnicle legacy on my phone to make my hot spot. I have a virgin mobile samsung intercept.
I believe barnicle is for Andriod -- so you are communicating Andriod to Android. My phone is Windows Mobile running XDA CM Internet Sharing. My A7 will not connect to my phone while other PCs (windows) in my home can connect to my phone.
Im in the same boat and I cant get the darn thing to connect when to the XDA-wifi-sharing (adhoc) network on my wm touch pro 2. I wish someone could solve this. I used to be able to dual boot my phone into android 2.2 (rooted) system and set up the hot spot on that and it would connect but that doesnt even work now for A7. I wish someone who really knows this stuff would give it some attention. Ive looked everywhere I find a search query. This is especially annoying since I cant switch to a different phone for at least another six months and I use the phone to get remote access to the internet for all my hardware.
I've got a work around if you are up to it. I starting thinking about a previous user using barnicle. So I ported Andriod to my WM6.5 TP2 CMDA http://sites.google.com/site/androidport/downloads. I launched Andriod from my WM and went to Android Market place and downloaded barnicle. Lauched barnicle and connected my A7. It works. I just have to remember to boot into Andriod when I want to tether.
dkcarmona said:
Well I applied the adhoc-fix.zip. It got me closer. I can see my phone broadcasting SID XDA-Wifi-Sharing but it won't obtain a IP address. -- Thanks. I'll keep looking
Click to expand...
Click to collapse
Is there another place to get the adhoc-fix.zip? I have tried pulling it down but without any luck.
Glad to see you keeping this alive. I did the same thing except the android rom i installed on tp2 had a wifi hotspot feature built into the wireless settings. Its a pain going back and forth though and i find wm is way more stable. I saw someone mention wifi encryption ane cmod on a file. I dont know much about these and how to fiddle with it but im gonna keep searchin.
michaelviner said:
Glad to see you keeping this alive. I did the same thing except the android rom i installed on tp2 had a wifi hotspot feature built into the wireless settings. Its a pain going back and forth though and i find wm is way more stable. I saw someone mention wifi encryption ane cmod on a file. I dont know much about these and how to fiddle with it but im gonna keep searchin.
Click to expand...
Click to collapse
Ninetoes49 was nice enough to povide a link to the adhoc-fix.zip file at the following site:
http://www.4shared.com/file/dHDOwV-T/adhoc-fix.html
After installing,, my A7 saw the barnicle SSID. I haven't used WPA yet but at least the wifi link is working.
I have windows mobile phone and barnicle is for android. From reading alot, i guess froyo (android 2.2) has problems with WEP connections. The tethering program i use on windows mobile, xda wifi-sharing, uses wep encryption only. Im wondering if something can be changed within the code to make it open like it is in android tethering program which works fine. I would keep using android on windows mobile phone except has no bluetooth functionality and its freezes up a lot. By the way, ive noticed problems with the a7 dropped from home wep networks ive been on too.
michaelviner said:
I have windows mobile phone and barnicle is for android. From reading alot, i guess froyo (android 2.2) has problems with WEP connections. The tethering program i use on windows mobile, xda wifi-sharing, uses wep encryption only. Im wondering if something can be changed within the code to make it open like it is in android tethering program which works fine. I would keep using android on windows mobile phone except has no bluetooth functionality and its freezes up a lot. By the way, ive noticed problems with the a7 dropped from home wep networks ive been on too.
Click to expand...
Click to collapse
I wish I could help more but I am not familiar with Windows Mobile products.
I have been wondering if I should even fool with encryption on my mobile setup. I figure no one can jump on if its not running. I only use it occassionaly. Is it possible that enough people in a given area could "clog" the connection if I don't limit access with encryption?
wep
I'm assuming you have a key assigned in the WEP setup. Basically WEP is not secure since there are tools readily available to crack the key you use in less than 10min. If you don't broadcast the ssid that would make it more difficult since most people would not see the network readily. You would have to try that to see if you can access with an ssid that is not being broadcast. Some systems have a problem connecting to wireless networks that aren't broadcasting the ssid.
I am connecting to my home net using WPA/WPA2 with no problem. I have not connected to a tethering capability.
michaelviner said:
I have windows mobile phone and barnicle is for android. From reading alot, i guess froyo (android 2.2) has problems with WEP connections. The tethering program i use on windows mobile, xda wifi-sharing, uses wep encryption only. Im wondering if something can be changed within the code to make it open like it is in android tethering program which works fine. I would keep using android on windows mobile phone except has no bluetooth functionality and its freezes up a lot. By the way, ive noticed problems with the a7 dropped from home wep networks ive been on too.
Click to expand...
Click to collapse
I have a TP2 (Sprint) and had the same issues as you do. I was using the XDA wifi sharing app but have found an older version of wmwifirouter that works and doesn't require a wep.
There is one caveat though. Using the app has broke my internet sharing one time causing me to have to clear storage. So, if you check the net for wmwifirouter 0.91 and use that, you should be able to connect after the adhoc fix is flashed on your a7.
Sent from my A7-040 using Tapatalk
Marbieskarb said:
I have a TP2 (Sprint) and had the same issues as you do. I was using the XDA wifi sharing app but have found an older version of wmwifirouter that works and doesn't require a wep.
There is one caveat though. Using the app has broke my internet sharing one time causing me to have to clear storage. So, if you check the net for wmwifirouter 0.91 and use that, you should be able to connect after the adhoc fix is flashed on your a7.
Sent from my A7-040 using Tapatalk
Click to expand...
Click to collapse
Thanks Marbieskarb -- for the older version tip of wimwifirouter 0.91 http://forum.xda-developers.com/attachment.php?attachmentid=152502&d=1233460803 It worked for me too but after I applied the adhoc fix discuss earlier in this thread. So, now I do not have to dual boot my TP2 to Andriod just to use a tethering app. Great. I'm running wimwifirouter on TP 2 WM6.5.
dkcarmona said:
Thanks Marbieskarb -- for the older version tip of wimwifirouter 0.91 http://forum.xda-developers.com/attachment.php?attachmentid=152502&d=1233460803 It worked for me too but after I applied the adhoc fix discuss earlier in this thread. So, now I do not have to dual boot my TP2 to Andriod just to use a tethering app. Great. I'm running wimwifirouter on TP 2 WM6.5.
Click to expand...
Click to collapse
Here is the link to the older free version WmWifiRouter that worked for me.
http://www.phonenews.com/where-in-the-world-is-wmwifirouter-2763/
So i just got the phone today. In my home I don't have a router, but my laptop is connected, so i usually use my laptop to open wireless via connectify for other wireless devices in the house.
my old sony ericsson mobile phone uses the wifi fine, so does my NDS and gf's iphone4. however my desirez does not even see the wifi network at all.
i did some googling and it seems android phones do not recognize adhoc networks?? is there some simple steps anyone can help me with now?
i have yet to root my phone, and i really dont want to buy a whole new router just for it. thanks.
For connecting your android to ad-hoc network you need to
root and patch ,but there are other ways too ,you can setup
a virtual router if you are using linux there are lots of tutorials around
that you can follow .if you are using windows 7 you can use connectify me.
you mentioned you are using connectiry did you mean
"connectify me" for windows 7 ?? because if you are using that
your phone should see the network and connect to it with no
problem, because connectify me is NOT an ad-hoc network
it act as a virtual router and thats the hole point to it.
i am using connectify on windows 7, and all my other devices see the connection except my desire Z. Connectify says the mode is Ad-Hoc, WEP.
So, I was wondering if that's why my new phone can't see it?
it's funny because a month ago my brother bought HTC Mozart (win7phone) and he couldnt use my connectify and i thought win7 sucks. well i guess it's HTC that sucks.. since my old sonyericsson and iphone can both catch the signal...
would be really great if there is easy way for me to use it..
right now i basically have to use the USB to let the phone use the internet, since i have no phone plans yet.
thunder9111 said:
i am using connectify on windows 7, and all my other devices see the connection except my desire Z. Connectify says the mode is Ad-Hoc, WEP.
Click to expand...
Click to collapse
Ok this is the problem .you are running connectify in ad-hoc mode and
android doesnt support that .you need to switch the mode to access point instead of ad-hoc and then it will work without any problem.
setup connectify again and choose access point instead of ad-hoc.
oh crap i just checked, seems like my laptop doesnt have a win7 compatible device that allows me to share through access point..
sigh.. all i can do is ad-hoc sharing. are there any other ways?
thunder9111 said:
oh crap i just checked, seems like my laptop doesnt have a win7 compatible device that allows me to share through access point..
sigh.. all i can do is ad-hoc sharing. are there any other ways?
Click to expand...
Click to collapse
Buy a cheap router?
Sent from my T-Mobile G2 running Cyanogenmod.
root your phone and patch it is the easiest method. You'll get other benefits from rooting, and it's quite easy now. there are walkthroughs in the development subforum.
If connectify is sharing your network as adhoc mode, is because your wifi card is not fully supported.
You can get a compatible one for few bucks.
Altenatively google a bit for ad hock enabled mods, but I havent tried that mods on DZ.
so i take my laptop to an electronic shop asking for a win7 compatible wifi card?
how much do they usually cost?
i guess this would be easier than rooting my phone n going through the modifications or buying a new router.
thunder9111 said:
so i take my laptop to an electronic shop asking for a win7 compatible wifi card?
how much do they usually cost?
i guess this would be easier than rooting my phone n going through the modifications or buying a new router.
Click to expand...
Click to collapse
Just look on the connectify site for the compatible chipset list, then you can look @ebay or other online resellers to buy one.
Usually they cost less than 20/25$ but is frequent to find one for something like 5$, maybe used.
fix
replace wpa_supplicant file with this one in /system/bin/
http://www.mediafire.com/?tkxg6c0s386cnlc
make sure u have a root access. also don't forget to make a backup of your original file.
Hey guys just curious if there is a solution to reverse tether via usb on the motorola atrix. I've searched every post imaginable but nothing works for the Atrix. Come on XDA turn water in wine for me
Sent from my MB860 using XDA App
I was wondering how to tether via usb normally, I can't seem to find an option anywhere on my AT&T branded Atrix
It should be in your list of apps... there should just be an app called "Tethering" to preform your task. It's super simple to use as well just click of the "USB Tethering" option and your done but for further detail on tethering try just going in google and typing USB tethering on windows XP.
Sorry I would post a link to a good site but I'm a newbie and I need to do 8 posts before I can post links to external websites.
If you don't have the APP let me know and I'll find a way to get it to you.
But someone please help me out with my problem...
Thanks,
Ghettosean
ahh I see, unfortunately I don't have it and I assume it's because I'm running gingerblur without bloatware.. Would be great if you could somehow get it too me and in relation to your problem I don't think it would be easily possible unless you used wireless. Ad-hoc network with internet connection sharing.
Sent from my MB860 using XDA App
ghettosean said:
It should be in your list of apps... there should just be an app called "Tethering" to preform your task. It's super simple to use as well just click of the "USB Tethering" option and your done but for further detail on tethering try just going in google and typing USB tethering on windows XP.
Sorry I would post a link to a good site but I'm a newbie and I need to do 8 posts before I can post links to external websites.
If you don't have the APP let me know and I'll find a way to get it to you.
But someone please help me out with my problem...
Thanks,
Ghettosean
Click to expand...
Click to collapse
What? did I get ripped off? I haven't seen an app for tether that came with my phone. If that is true, then all the time the DEV's put into hacking to get it working was for not? use the search and look for tethering. the answer is close to what you said, but does not involve an "app". It is a setting within the wireless network settings, but selecting it alone does not get you tethering.
Ahh I have seen wireless tethering (but use barnacle instead) I was curious about USB tethering though
Sent from my MB860 in Australia
If any newbies want this app just email me and I will send it as for the people clogging my post I will send it by the end of the day... I just want help with my problem now and I know it wont be easy unless its wifi but it can be done with other phones on xp... im going to try and get it working effortlessly in linux this weekend... help xda!!!
Sent from my MB860 using XDA App
Maybe I am not understanding what your question. tethering is usually referring to being able to use the phone as an access point so you can surf the web from your computer using the phone as a "modem". what are you wanting to do with reverse tethering? If you are wanting to do what i described, go into the development threads and look for ARoot or gladroot. also I think most of the roms have this built in now also.
pdanet allows tethering through usb
mrphil101 said:
Maybe I am not understanding what your question. tethering is usually referring to being able to use the phone as an access point so you can surf the web from your computer using the phone as a "modem". what are you wanting to do with reverse tethering? If you are wanting to do what i described, go into the development threads and look for ARoot or gladroot. also I think most of the roms have this built in now also.
Click to expand...
Click to collapse
By reverse tethering I mean the opposite of what you have described and that is to use the internet provided on the computer onto your phone. This can be done and I will do it with red hat linux I'm positive that I can get this to work but to get this to work on windows XP is a different challenge with the Atrix in particular.
If anyone has any information please help a brother out!
ghettosean said:
By reverse tethering I mean the opposite of what you have described and that is to use the internet provided on the computer onto your phone. This can be done and I will do it with red hat linux I'm positive that I can get this to work but to get this to work on windows XP is a different challenge with the Atrix in particular.
If anyone has any information please help a brother out!
Click to expand...
Click to collapse
I don't know about USB tethering, but if your computer has a wireless adapter you could use it to create an ad hoc network to which your phone could connect. You could then use ICS (Internet Connection Sharing) in Windows to bridge your internet connection to your wireless one. That way your Atrix could use your computer's interntet connection wirelessly!
kevp453 said:
I don't know about USB tethering, but if your computer has a wireless adapter you could use it to create an ad hoc network to which your phone could connect. You could then use ICS (Internet Connection Sharing) in Windows to bridge your internet connection to your wireless one. That way your Atrix could use your computer's interntet connection wirelessly!
Click to expand...
Click to collapse
True but as far as reverse usb tether. I don't know about android but with winmo just by having the phone synced would allow for this. Have you tried the medi sync or any of the other option when you connect via usb to see if they allow for this?
Sent from my MB860 using XDA Premium App
ghettosean
if what you want is to find workaround of WiFi problems on unlocked Atrix, you'd better look for AT&T SIM (even nonworking, just to report the phone it's operator ID - there are lot at eBay). Currently this is the best solution. Also, member crnkoj is developing the solution HERE, but it is very complicated for now.
Old trusted WinMo born when WiFi on phone was just a miracle, so it was able to get internet through USB, but Android never dreamed there is an AT&T whith its stupid intervention in phone firmware.
Thanks for all the replies... I've found a solution and I can actually reverse tether over USB two different ways and I will share my findings in a week... I have one last snag. Full internet access but I can't download apps from the market even though I took down my firewall on windows... Give me one more week but if anyone has a solution to that new problem that doesn't include opening port 5228 let me know. Cheers!!!
Sent from my MB860 using XDA App
Solution
Hey all... I'm still having no luck downloading from the market or using other internet apps but browsing on the web seems to be fine with reverse usb tethering. here's what I have done:
1. I connect to my laptop via usb and I start up regular usb tethering (as if I'm going to give internet to my computer from my phone)
2. When I complete step 1 on the windows computer I see a new network icon pop up representing my atrix as an RNDIS networking device
3. From here in windows I right click on the internet connection that is providing the internet to the laptop or computer and select properties from here I click on the advanced tab and check the box that allows "internet connection sharing" there is also a dropdown to pick which networking device you want to share with I select the networking device that represents the atrix and click ok.
4. From here I restart my internet connection and then I right click on the internet connection for the atrix and select properties. On the general tab I select internet protocol (TCP/IP) and click the properties button and change my ip address manually and pick --> 192.168.2.1 with a subnet mask of 255.255.255.0 then click ok and ok again
5. From here I start adb shell (or you can use terminal on your phone if you wish) and type the following
su (to go into root or super user mode)
ifconfig usb0 192.168.2.2 netmask 255.255.255.0 up
route add default gw 192.168.2.1 dev usb0
setprop net.usb0.dns1 192.168.2.1
setprop net.dns1 192.168.2.1
iptables -F
iptables -F -t nat
setprop net.dns1 8.8.8.8
setprop "net.gprs.http-proxy" ""
after this ping www.yahoo.ca to be sure everything is working properly and if you get a response your good to go.
I'm assuming that everyone who is using these instructions has android sdk installed and there windows machine recognises the adb drivers for there phone as i'm convinced this will work with any android phone not just the atrix and I will test to confirm.
I wrote up these instructions pretty quick and I'll probably shorten them up as there is a few unessesary parts in the script for adb shell but everything will work and you should be able to but this will only allow you to use the internet and browse the internet with your phone this will not allow the market and other internet apps to work if anyone finds a solution to this it would be much appreciated.
Cheers all and ANDROID RULES!!!
Ghettosean
On the Atrix there is no USB tethering built in!
Chubby_Skunk said:
On the Atrix there is no USB tethering built in!
Click to expand...
Click to collapse
Should you have taken some time to read the thread, what you actually wrote wouldn't be an epic fail.
joyo22 said:
Should you have taken some time to read the thread, what you actually wrote wouldn't be an epic fail.
Click to expand...
Click to collapse
lol
reading comprehension is not this forums users' strong suit
good work too btw ghettosean, i know youve been working on this for some time as i saw op
There's a free software for windows call connectify that can convert ur xp into a wireless station...
Sent from my MB860
Ok since I have done this myself AND IT WORKED!!! What I have done is not a fail.... My atrix did come with tethering software and the app itself is called "Tethering" so sorry for those who do not have it but I will post another message today attaching the APK for this and how to install it. I'm at work and can't do this right now.
Why do people start bashing others before taking the time to ask for help?!?
I've attached the APK to this post you ungrateful whinny blood sucking... )@#$(@[email protected]*)[email protected]*)($*)@($*!!!
YOUR WELCOME BY THE WAY TO THE UNGRATEFUL ONES WHO WILL BENIFIT FROM THIS!
Anyone who has contributed to this post in a positive way a big thank you to them.