Flashing GAPPS - EVO Shift 4G General

So I have already flashed my recovery and tried out a few different ROMS, loving the progress already, currently I am running Evervolv AOSP ROM. Instructions state to simply flash the GAPPS zip via CWM, I tried this in both cwm 3.0 and 2.5xx, but upon reboot they arent actually there.
Any ideas?

What I would do is wipe everything, re flash the rom, and install GAPPS before ever booting
Sent from my PG06100 using XDA App

Will do , thanks

creepdogg said:
Will do , thanks
Click to expand...
Click to collapse
Please post the outcome! I haven't done it yet but I've been thinking about checking out the GB ROM too!

Jeezimus said:
Please post the outcome! I haven't done it yet but I've been thinking about checking out the GB ROM too!
Click to expand...
Click to collapse
Well that did the trick, worked like a charm, loving this rom so far. Once they get the GPS and headphone jack working it will be my daily driver. Although it works great so far. Rooting and flashing CWM recovery was a breeze. Probably the hardest part about flashing and rooting etc is getting ADB and the SDK set up properly. Once you get that set up your golden

Glad i could help. Im dying for an evervolv update.

Yes. Me as well. I am digging it thus far.
Sent from my PG06100 using XDA App

Related

TWRP: Crashes restoring or wiping /data

Hi all,
Issue with TWRP and restore. I've got a backup, but when I tried to restore it, it would crash and reboot while restoring the /data partition. I try wiping the /data partition (I have my backup on a server, too) and it crashes midway through that, too. Just reboots and returns to TWRP.
What should I do?
Thanks,
Ben
Wipe cache, dalvik cache, fix permissions, then restore.
Sent from my EVO using xda app-developers app
freshlysqueezed said:
Wipe cache, dalvik cache, fix permissions, then restore.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Tried that, no luck
I'm currently restoring the factory 4.2.2, then installing TWRP and adb'ing the files back over to try restoring again. Hopefully this works.
Thanks,
Ben
Fmstrat said:
Tried that, no luck
I'm currently restoring the factory 4.2.2, then installing TWRP and adb'ing the files back over to try restoring again. Hopefully this works.
Thanks,
Ben
Click to expand...
Click to collapse
This issue is mentioned over in the official TWRP forum under "Original Android Development" The Dev acknowledged it, saying he needs to fiddle with it... Might not be bad if you poked your head in there with any other information you could add...
*fingers crossed* Hope they get it patched up soon... I'm a little restore shy now. Up until I encountered this, I was swapping ROMs on a nearly daily basis... No anymore.
I started over again, like you, and it works ok now. But I don't know when/if the problem will rear its ugly head again, so holding off until I hear more.
DefinityX said:
This issue is mentioned over in the official TWRP forum under "Original Android Development" The Dev acknowledged it, saying he needs to fiddle with it... Might not be bad if you poked your head in there with any other information you could add...
*fingers crossed* Hope they get it patched up soon... I'm a little restore shy now. Up until I encountered this, I was swapping ROMs on a nearly daily basis... No anymore.
I started over again, like you, and it works ok now. But I don't know when/if the problem will rear its ugly head again, so holding off until I hear more.
Click to expand...
Click to collapse
I'm having the same problem with 2.5.5.0. Happens probably 30% of the time and always during the data restore. It completes on the second go-round, but I'm constantly holding my breath. I was under the impression that this was taken care of in this latest version.
Sent from my Nexus 10 using Tapatalk HD
mine crashes when I do simple wipes
on latest
happens about 30% of the time too
I had that happen a lot, I just 2.3.3.0 now and it is perfect.
http://techerrata.com/browse/twrp2/manta
Rom Toolbox app will let you install it too.
stonebear said:
I had that happen a lot, I just 2.3.3.0 now and it is perfect.
http://techerrata.com/browse/twrp2/manta
Rom Toolbox app will let you install it too.
Click to expand...
Click to collapse
Oh, good, I'll do that. Thanks.
Edit (5 min. later): Wow, that was easy, lol. Thanks again.
Sent from my Nexus 10 using Tapatalk HD
bruce7373 said:
Oh, good, I'll do that. Thanks.
Edit (5 min. later): Wow, that was easy, lol. Thanks again.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Enjoy a recovery you can have faith in, lol.
stonebear said:
Enjoy a recovery you can have faith in, lol.
Click to expand...
Click to collapse
Ain't it the truth.
So I just tried doing the same with my phone and the installation failed, something about illegal instruction. I'm running CM 10.1 on an unlocked, S-OFF HTC Vivid.
Any ideas?
Sent from my Vivid 4G using Tapatalk 2
bruce7373 said:
Ain't it the truth.
So I just tried doing the same with my phone and the installation failed, something about illegal instruction. I'm running CM 10.1 on an unlocked, S-OFF HTC Vivid.
Any ideas?
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
Are you using Rom toolbox? If not, you aren't trying to flash the manta version are you?
Sent from my Nexus 10 using Tapatalk HD
stonebear said:
Are you using Rom toolbox? If not, you aren't trying to flash the manta version are you?
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
No, I tried with RomToolbox, same method as with the N10. I choose 2.3.3 0 from the list, so I assume it was the Holiday version. The first time I tried, it claimed I didn't have permission, but I think that was because it was the first time I was using Rom toolbox since flashing CM so the permission popup came after the fact. I rebooted and that was when the message changed to invalid instruction.
Edit: Tried again with 2.4.1.0. Same result. But I located the files and they are holiday, so I can just flash with fastboot, I guess.
Sent from my Vivid 4G using Tapatalk 2
bruce7373 said:
Edit: Tried again with 2.4.1.0. Same result. But I located the files and they are holiday, so I can just flash with fastboot, I guess.
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
Yea that should work. Must be a Rom toolbox problem, I would think.
Sent from my Nexus 10 using Tapatalk HD

[Q] Stock Unrooted Flashable ROM

Does anyone know of a stock flashable ROM without Root and Busybox?
I'm aware of the thread guiding people on going back to factory but I don't want to do that. I want to be able to just flash a Rooted ROM if I want one and flash back to standard unrooted if I want using TWRP.
My reason behind this that I spend a lot of time on the train at the minute so decided to get Sky Go. Unfortunately it detects that the device is rooted and won't run.
There are a few threads around the net with scripts and suggestions but nothing seems to work for me.
I don't think there are any..... Hmmm.
Sent from my Nexus 4 using Tapatalk 2
You can flash the stock ROM with fastboot but not from within recovery. Get it here: https://developers.google.com/android/nexus/images
I could make one I suppose, wouldn't take long at all...
EddyOS said:
I could make one I suppose, wouldn't take long at all...
Click to expand...
Click to collapse
If you could do that it would be great.
I was just looking at the tutorial to bake it myself but having issues with Cygwin. Much quicker and easier if you did it.
Owe you one.
I use Linux so it won't take long. You literally want a flashable stock ROM, no changes whatsoever?
EddyOS said:
I use Linux so it won't take long. You literally want a flashable stock ROM, no changes whatsoever?
Click to expand...
Click to collapse
Exactly. I use a standard stock rooted ROM usually.
Just realised I don't actually use root for anything at the minute but likely will do in the future.
Thanks again.
I'll try and do it this afternoon but if not this evening once back at home
Uploading at the mo, it's literally the stock ROM dumped into the kitchen and cooked out with no change whatsoever
EddyOS said:
Uploading at the mo, it's literally the stock ROM dumped into the kitchen and cooked out with no change whatsoever
Click to expand...
Click to collapse
Excellent. Thanks buddy.
I think I'll play with it too and keep the zip stored just so I have it.
Thanks
Sent from my Nexus 4 using Tapatalk 2
Here you go. I've not tested but it should be fine (let me know if it's not)
https://www.yousendit.com/download/UVJnSU5IQVNiV3dPd3NUQw
Working perfectly so far mate! Sky Go is working and no wipe was required.
Owe you one mate. Top work. Thank you.
Good to hear! You're welcome
EddyOS said:
I could make one I suppose, wouldn't take long at all...
Click to expand...
Click to collapse
Very cool that you've done this, but I should give a word of caution: there are some problems that wiping via fastboot will fix, but installing a flashable stock .zip won't fix. For example, when a 16GB phone thinks it's only 8GB. (I have reason to believe that there are other problems that can only be fixed in this way, but I can't prove it. :silly
That's not something the OP cared about, he just needed to 'unroot' to use a TV app that checks for root access
He should give this app a try
http://forum.xda-developers.com/showthread.php?t=1241517.
Sent from my Nexus 4 using XDA Premium HD app
trapdogg said:
He should give this app a try
http://forum.xda-developers.com/showthread.php?t=1241517.
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
It doesn't work - none of the 'root hiding' apps work with Sky Go
trapdogg said:
He should give this app a try
http://forum.xda-developers.com/showthread.php?t=1241517.
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
I tried that.
I tried a script that was published on the net to remove root and busybox.
I tried removing root and busybox manually.
I tried flashing stock kernal
I tried several other apps.
A flashable stock rom was my last resort as I was under the impression that I'd need to wipe and I didn't want to do that. I just tried it without wiping on the off chance that it worked and it did, so problem solved.
None of my Apps were using Root so I thought I'd get rid of it completely but wanted the option to flash CM10.1 once Bluetooth MAP profile is fixed and working without having to go through putting TWRP on again.
It's all in the OP and posts following that.
EddyOS saw what I was after and offered to help. He's a great dude.
Just for learning purposes, how come no one has made a flashable stock zip until now? Wouldn't it just be like any custom rom but instead its just stock?

what TWRP works best?????

hello!! im back!!! sooooooo happy to be back.. i traded my s4 few months ago for the htc one.. and now im back wanted to kno what twrp works best i kno before when i had the s4 the old versions work best... thanks
P.Mobile said:
hello!! im back!!! sooooooo happy to be back.. i traded my s4 few months ago for the htc one.. and now im back wanted to kno what twrp works best i kno before when i had the s4 the old versions work best... thanks
Click to expand...
Click to collapse
The latest I used that worked well was the one Reverepats repacked "Reverpats-TWRP-Sprint-2.6.3.1.zip".
However the one I KNOW works without issues (for me) - installing, wiping, creating AND restoring backups, accessing USB storage etc. is "TWRP-Recovery-jfltespr-2.5.0.2.zip"
There are some AOSP ROMs that recommend using CWM and not TWRP - so keep that in mind. Always try and follow the OP's suggestions.
+1. 2.5.0.2 is a solid one. I used several of the newer ones, and they worked, but not without quirks. Went back to 2.5.0.2 and all is good.
Welcome back!
2.5.0.2 for me. I can't flash aosp RMs with it (not sure if it a twrp/cwm thing or not) but absolutely no issues at all. Backups, sdcard, touchscreen all work great. I'm leaving well-enough alone!
Sent from my SPH-L720 using xda premium
definitely recommend twrp 2.5.0.2, was the only recovery I used til I switched to CWM.
thanks fellaz!! 2.5.0.2 it is!!
leaderbuilder said:
The latest I used that worked well was the one Reverepats repacked "Reverpats-TWRP-Sprint-2.6.3.1.zip".
However the one I KNOW works without issues (for me) - installing, wiping, creating AND restoring backups, accessing USB storage etc. is "TWRP-Recovery-jfltespr-2.5.0.2.zip"
There are some AOSP ROMs that recommend using CWM and not TWRP - so keep that in mind. Always try and follow the OP's suggestions.
Click to expand...
Click to collapse
Please enlighten us as to where you got the repacked TWRP.
Thanks
ObrienDave said:
Please enlighten us as to where you got the repacked TWRP.
Thanks
Click to expand...
Click to collapse
Been using this since it came out, no curtain hangs, no problems, my twrp of choice
http://www.androidfilehost.com/?fid=23159073880933366
Sent from my SPH-L720 using XDA Premium 4 mobile app
ObrienDave said:
Please enlighten us as to where you got the repacked TWRP.
Thanks
Click to expand...
Click to collapse
Technically not 'repacked' I guess but Reverepats was cool enough to make the zip for some and shared it for all.
I tried every version and always went back to 2.5.0.2.
Sent from my SPH-L720 using Tapatalk 4 Beta
bcombel said:
I tried every version and always went back to 2.5.0.2.
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I have been using the new version 2.6.3.1 and love it.

[ROM][STOCK] Modded Stock ROM

Hello guys. I know people have been wanting custom ROMs for this device. I cannot give that, but I can give a modded stock ROM with Shaky156's kernel and touchscreen fix for android 4.4.2. It comes rooted, with OTA disabled(so no need to worry about receiving any updates. IF you do get OTA, let me know and I will fix it. It is a flashable zip for CWM/TWRP.
Install Instructions:
Boot into Recovery(TWRP/CWM)
Do a Factory Reset
Flash ROM
Reboot and Profit
Link:
http://d-h.st/qRU
I will try to keep this as updated as possible, may not happen but I will try.
Many thanks!
MATTHEWLONG said:
Many thanks!
Click to expand...
Click to collapse
Did it flash OK and everything?
Sent from my Amazon Tate using XDA Premium 4 mobile app
I got "Installation Aborted". perhaps my TWRP is outdated, been many months since I installed it.
coolloser said:
I got "Installation Aborted". perhaps my TWRP is outdated, been many months since I installed it.
Click to expand...
Click to collapse
Might want to update twrp for sure. Maybe that will fix that issue.
Sent from my Amazon Tate using XDA Premium 4 mobile app
Hello.TWRP 2.7.1.0. error in install.
I guess it doesn't work then, sorry. I tried my best.
Sent from my Amazon Tate using XDA Premium 4 mobile app
Hope this will work with P1988W (a.k.a the .LTE-ready version). Shaky156's kernel won't seem to work with it.
Sheepstick said:
Hope this will work with P1988W (a.k.a the .LTE-ready version). Shaky156's kernel won't seem to work with it.
Click to expand...
Click to collapse
2.5 years to late to the party mate, it didnt work anyway
Has anyone still got this rom thats available online. If it could be uploaded it would be much appreciated. I got one of these devices running stock 5.1 and its painfully slow so could really do with something that works
Many thanks
pgunning1 said:
Has anyone still got this rom thats available online. If it could be uploaded it would be much appreciated. I got one of these devices running stock 5.1 and its painfully slow so could really do with something that works
Many thanks
Click to expand...
Click to collapse
Did you try Cyanogen Rom?
https://forum.xda-developers.com/nvidia-tegra-note-7/development/rom-cyanogenmod-12-1-t3621615

How to install Cyanogenmod?

Very confused about the process of installing Cyangenmod on my phone. How do I install the unlocked firmware?
You may just want to wait if you are asking these questions. CM is still in alpha stages anyways, not everything is working for it to be a daily driver imo.
CM is definitely outta alpha stages
trev23sks said:
CM is definitely outta alpha stages
Click to expand...
Click to collapse
You cafe to back that statement up? Like, what isn't working, and. Your source?
Sent from my 2PS64 using XDA-Developers mobile app
And, this hasn't been answered.
I've Super CID.
I've RUU'd to the latest Sprint version, and I just sit at the boot animation forever.
mcwups1 said:
And, this hasn't been answered.
I've Super CID.
I've RUU'd to the latest Sprint version, and I just sit at the boot animation forever.
Click to expand...
Click to collapse
That is because you cannot do it that way which is why you bootlooped. The CM threads speak of this numerous times. You need to RUU the US developer, then FLASH a Sprint variant ROM (like Bad Boys), then wipe and install CM which will work. The other option is to just use the developer edition with SuperCID/MID and then CM will work without flashing back to Sprint ROM's. I would go with the first option as you will gain better LTE as you wont be on Sprint's "global" connections.
GROOVYJOSHCLARK said:
That is because you cannot do it that way which is why you bootlooped. The CM threads speak of this numerous times. You need to RUU the US developer, then FLASH a Sprint variant ROM (like Bad Boys), then wipe and install CM which will work. The other option is to just use the developer edition with SuperCID/MID and then CM will work without flashing back to Sprint ROM's. I would go with the first option as you will gain better LTE as you wont be on Sprint's "global" connections.
Click to expand...
Click to collapse
Flash a Sprint ROM, or the Sprint firmware?
Thank you in advance for your help.
Also, which one of the RUU do I grab?
There are many, many RUU's. Which am I looking for?
discomaniac said:
Very confused about the process of installing Cyangenmod on my phone. How do I install the unlocked firmware?
Click to expand...
Click to collapse
PM me
Sent from my HTC 10 using XDA-Developers mobile app
Such a shame this thread went to PM. It seems like it would have been good basic information for experienced flashers whom are new to the HTC world. I came from the Galaxy S5 (SM-900R7 nTelos variant), and had been testing out LineageOS 14.1 on it (as an update to CM13, which I was building myself). This thread would have been helpful to help flash the HTC10 version. Still learning it. Quite different from the Samsungs, for sure!
would someone mind either posting in the thread or PM me back with a link or guide, step by step how to install Cyanogenmod. I have rooted a few Samsung phones before, but once I have them rooted and running stable I usually leave them alone...point being I have not rooted a phone in two years....
I'll be getting my HTC 10 Sprint phone tomorrow, so I would love a full step by step how to root, install twrp and finally how to install the ROM...BTW I used to run a ROM called liquid smooth....does that ROM still exists?
Is Cyanogenmod the best most stable ROM for the HTC 10 Sprint?
Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.
I can't seem to find the instructional thread..? I've been rooting & flashing HTC phones since the HTC 4G LTE, but this thing is a different beast entirely. I've unlocked via HTC Dev, installed unofficial TWRP 3.0.3-9, flashed the custom SU, & installed Viper (did all that from stock N). Viper is definitely super solid, but I've always preferred the CM/AOSP platform. I've wiped the internal like I've done a thousand times & flashed Lineage + gapps (arm64). the phone boots & gets to the lineage boot animation & sits there indefinitely. I let it sit for almost an hour, & obviously it wasn't going to boot.
What am I missing, guys? Any & all help will be greatly appreciated.
any ideas?
King of the Couch said:
I can't seem to find the instructional thread..? I've been rooting & flashing HTC phones since the HTC 4G LTE, but this thing is a different beast entirely. I've unlocked via HTC Dev, installed unofficial TWRP 3.0.3-9, flashed the custom SU, & installed Viper (did all that from stock N). Viper is definitely super solid, but I've always preferred the CM/AOSP platform. I've wiped the internal like I've done a thousand times & flashed Lineage + gapps (arm64). the phone boots & gets to the lineage boot animation & sits there indefinitely. I let it sit for almost an hour, & obviously it wasn't going to boot.
What am I missing, guys? Any & all help will be greatly appreciated.
Click to expand...
Click to collapse
They dont have any roms built for the CDMA 10, notice there are no CM or AOSP roms in the SPrint htc 10 rom section. It probably didn't boot completely cause of a kernel mismatch.
there are people in the LOS thread saying they're on Sprint running it. I just can't follow their methods, which is why I was hoping for a tut.
---------- Post added at 12:03 AM ---------- Previous post was at 12:02 AM ----------
trev23sks said:
Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.
Click to expand...
Click to collapse
i can't seem to find your instructional thread man.
King of the Couch said:
there are people in the LOS thread saying they're on Sprint running it. I just can't follow their methods, which is why I was hoping for a tut.
---------- Post added at 12:03 AM ---------- Previous post was at 12:02 AM ----------
i can't seem to find your instructional thread man.
Click to expand...
Click to collapse
The solution has been discovered by @The Fer-Shiz-Nizzle!
Flash the file in this post. You must be s-off. Works perfectly.
https://forum.xda-developers.com/showpost.php?p=71388292&postcount=1049
trev23sks said:
Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.
Click to expand...
Click to collapse
drob311 said:
The solution has been discovered by @The Fer-Shiz-Nizzle!
Flash the file in this post. You must be s-off. Works perfectly.
https://forum.xda-developers.com/showpost.php?p=71388292&postcount=1049
Click to expand...
Click to collapse
just flash that single file then install the rom/gapps? that's pretty simple..
King of the Couch said:
just flash that single file then install the rom/gapps? that's pretty simple..
Click to expand...
Click to collapse
That's all you need. Must be S-off. Rename to 2PS6IMG.zip and place on root of ext SDcard. Reboot to Download mode and accept the prompt to flash the file. Reboot back to recovery, make the proper wipes and flash ROM & Gapps. Reboot and enjoy AOSP/LOS!
Sent from my Sprint HTC 10 using Tapatalk
The Fer-Shiz-Nizzle said:
That's all you need. Must be S-off. Rename to 2PS6IMG.zip and place on root of ext SDcard. Reboot to Download mode and accept the prompt to flash the file. Reboot back to recovery, make the proper wipes and flash ROM & Gapps. Reboot and enjoy AOSP/LOS!
Click to expand...
Click to collapse
Correct. You must be S-Off to do this. Put the .zip file, named 2PS6IMG.zip, on the root of your ext sd card, reboot to bootloader and flash it. After successfully flashing that file, you'll be able to run AOSP without issue. Like you said, download and flash. Enjoy! ?
drob311 said:
Correct. You must be S-Off to do this. Put the .zip file, named 2PS6IMG.zip, on the root of your ext sd card, reboot to bootloader and flash it. After successfully flashing that file, you'll be able to run AOSP without issue. Like you said, download and flash. Enjoy!
Click to expand...
Click to collapse
I am seeing two different instruction steps in the posts and just want to be sure i got this right. Do we flash the sd card zip before or after flashing an AOSP rom and gapps? Also, is there any particular aosp rom that works best for this method?
thank you!

Categories

Resources