Related
Just recently got a streak and have been tinkering to get it ready for rom flashing when a froyo or two appear and just want to check my clockworkmod recovery has worked correctly.
A brief history of what i've got and done:-
Device is an o2 uk model with 2.1 update 1 on it.
Used androot to root it then root explorer to remove the recovery-install.sh then terminal emulator to install clockworkmod 2.5.0.1.
(didn't use adb as i'm on win7 x64 and it doesn't want to work )
When i enter clockworkmod recovery the screen displays and at the bottom after the menu it says:-
ClockworkMod Recovery v2.5.0.1
E:Can't find MISC:
E:Can't find MISC:
E:Can't find MISC:
So question is is this ok or should i try an earlier version?
Cheers
Paul
Johnston411 said:
(didn't use adb as i'm on win7 x64 and it doesn't want to work )
Click to expand...
Click to collapse
Download PDAnet for android and use the driver included with that package instead of the dell driver.
I am using Win7 x64 also. My adb works fine now.
r00tcause said:
Download PDAnet for android and use the driver included with that package instead of the dell driver.
I am using Win7 x64 also. My adb works fine now.
Click to expand...
Click to collapse
Cheers i'll give that a bash
What clockwork recovery are you using?
i get the same error..
clockwork still worked for me even with the that error.
i found out by accident, scrolled around, pressed power button a couple of times, scrolled up and down and press the camera button a few times on the option and it worked. weird. i noticed like maybe i didn't press the button in deep enough.
I see that error too. Despite it, flashed to Froyo using update_new.zip with no major issues.
That is normal behaviour, wrong is to see a message "Can't mount" so you are all set up to roll on froyo, good luck you won't regret.
Johnston411 said:
Cheers i'll give that a bash
What clockwork recovery are you using?
Click to expand...
Click to collapse
None of the above at the moment since I went back to 1.6 from 2.1 build 6941. 1.8.1.7 is the only one that seems to work on 1.6 and it doesn't work that well (buggy).
The new one should work on 2.1, so I hear.
I'll be swapping to the new 2.2 beta soon so we shall see.
What can you do, if you have the can't mount error?
e: can't mount cache:recovery/command
same here
i wondered the same but as my clockwork works i havent worried too much about it... however everytime i attempt a nandroid backup, its fine till near the end when it says data failed, then if i try to restore the backup i get md5**** mismatch?
ive got used to starting from scratch everytime i do anything but it would be nice to have it working properly!
Don't bother with Clockwork, as Nandroid doesn't work! Use the recovery from http://forum.xda-developers.com/showthread.php?t=840326 instead as the Nandroid on this works perfectly! Saves a lot of time not having to re-install everything when something goes wrong
odyseus said:
Don't bother with Clockwork, as Nandroid doesn't work! Use the recovery from http://forum.xda-developers.com/showthread.php?t=840326 instead as the Nandroid on this works perfectly! Saves a lot of time not having to re-install everything when something goes wrong
Click to expand...
Click to collapse
brilliant...thank you!
Sorry for the wrong model, but i'm having this issue on a Desire too. I've routed the Device with unrevoked without a problem, then wanted to create a Nandroid, which doesn't work.
Also i've tried to wipe data and cache, CWM said all good, but after restart all Data is still there.
Could that be ROM related, the Rom is T-Mobile, not any official HTC Rom.
Hi everyone, I decided to finally root and flash to axura today. I saw the one click vibrant root link today and did that one successfully. I did some searching and ended up with Austiclees instructional video.
My phone is currently rooted and after downloading Axura 2.0.6. I loaded it onto my internal sd. I downloaded the newest clockwork and when i click install from sd card it seems to be working. However, the screen just goes to android system recovery and I'm stuck having to choose between reboot now or reinstall packages. I'm very frustrated right now and was wondering how to get Axura to actually install..
BTW I did not root from one click lag fix.. I hope thats not the problem.. Any help would be appreciated PLEASE!!!
I just flashed onyx on my vibrant like a day ago.
When you have the rom on your phone you go to rom manager install clockwork i cant remember if you need to restart... after that you click reboot into recovery ...
wait for the prompt to come up and choose to reinstall packages the phone will reboot and open another prompt (you may have to repeat this step if you didn't get into clockwork recovery just click reinstall again.)
Once you are at clockwork recovery you choose install from sdcard and navigate to your rom.
Sent from my futuristic phone
chuckblock said:
Hi everyone, I decided to finally root and flash to axura today. I saw the one click vibrant root link today and did that one successfully. I did some searching and ended up with Austiclees instructional video.
My phone is currently rooted and after downloading Axura 2.0.6. I loaded it onto my internal sd. I downloaded the newest clockwork and when i click install from sd card it seems to be working. However, the screen just goes to android system recovery and I'm stuck having to choose between reboot now or reinstall packages. I'm very frustrated right now and was wondering how to get Axura to actually install..
BTW I did not root from one click lag fix.. I hope thats not the problem.. Any help would be appreciated PLEASE!!!
Click to expand...
Click to collapse
The way you rooted is not an issue.
Click reinstall packages that should take you into cw recovery. Sometimes you have to click twice. Once in Cw recovery scroll down to install zip from sd card, then click choose zip from sd card. After that click on your chosen rom, let it do it's thing and when it brings you back to Cw screen click reboot now. Then enjoy your new Rom.
thanks guys... i figured it out... for anyone with the same problem, I just clicked reinstall packages twice; which put me into clockwork recovery. And for anyone deciding if they want to root and flash or not, let me just say axura's rom on the vibrant is undescribably wonderful. I love not having to reboot when I go to gallery, wifi problems are non existant, as for gps, I haven't tried yet but will be most likely flawless.
thanks ironlood and icandy...
sigh, why didnt i do this before -_-
No prob .. I was actually thinking about flashing Axura in a week or so ... just watcheda video that showed absolutely no lag
Sent from my futuristic phone
For me and my setup, Axura has been the best, and I tried most. I don't think you even need Voodoo lag fix kernel, I just could not resist. Stick with plain Aura 2.2 for now. It's smooth like butter.
And welcome to flashing!
Vibrant Axura 2.2 Voodoo 5 JL5 via the XDA app
Zw
12paq said:
For me and my setup, Axura has been the best, and I tried most. I don't think you even need Voodoo lag fix kernel, I just could not resist. Stick with plain Aura 2.2 for now. It's smooth like butter.
And welcome to flashing!
Vibrant Axura 2.2 Voodoo 5 JL5 via the XDA app
Click to expand...
Click to collapse
Lol yeah now that I figured out how easy flashing is I want to try everything.
The only thing I need to do is figure out how to use Odin and im set.
Sent from my futuristic phone
Lol ironlood, i jist downloaded odin and im trying to figure out how to use it too...
Sent from my SGH-T959 using XDA App
chuckblock said:
Lol ironlood, i jist downloaded odin and im trying to figure out how to use it too...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yeah I have read a few guides on Odin but the program itself is still hard for me to understand.
There needs to be a wiki or something that has a entire glossery for the program's terms.
Sent from my futuristic phone
I've flashed it before, but decided to install evil's rom (reverted back to 2.5.1.2).. I didn't like it so I went back and restored CM7, now I can't flash 2.5.1.4.. I get an error saying "an error occurred while flashing your recovery". Please help! I'm new to these stuff, thanks guys.
Skunk2 DC said:
I've flashed it before, but decided to install evil's rom (reverted back to 2.5.1.2).. I didn't like it so I went back and restored CM7, now I can't flash 2.5.1.4.. I get an error saying "an error occurred while flashing your recovery". Please help! I'm new to these stuff, thanks guys.
Click to expand...
Click to collapse
Same thing happend to me this morning. it was weird cause before that i was flashing it fine in order to use CM7. I tried reboots but still nothing. I then just flashed ICE and used the rom manager from the ice Rom and it worked. I was able to flash 2.5.1.4. Try that.
I'll give that a shot, thanks!
Sent from my HTC Glacier using XDA App
k20matt said:
Same thing happend to me this morning. it was weird cause before that i was flashing it fine in order to use CM7. I tried reboots but still nothing. I then just flashed ICE and used the rom manager from the ice Rom and it worked. I was able to flash 2.5.1.4. Try that.
Click to expand...
Click to collapse
IT WORKED! Thanks again!
How did it work? Share what you did.
Same thing happened to me yesterday.
Check the clockwork/download/mirror1.kanged.net/recoveries folder on your SD card. Is there a .img file in there called recovery-clockwork-2.5.1.4-glacier.img? If it's not in there that's why you can't flash it, because it can't find the file.
Not sure why the file was missing from the folder.. but thats what it turned out to be.
You should be able to download the image from: http://phones.crackflashers.com/glacier/recoveries/glacier-cwm3src-2.img
Or you can get the file already named correctly out of this zip: http://goo.gl/nZJ7U
But you'll have to dig for it to find it.
then rename it to exactly "recovery-clockwork-2.5.1.4-glacier.img" and put it in the folder. It should work then.
shortskoolbus it makes no diff. Now if you were missing the file then it would give you this error message "No legacy recoveries found, Are you connected to the internet?" and if you do have the file then it gives you this error message "An error occurred while flashing your recovery."
I was trying to install new OC kernel and came across this as I originally thought it maybe linked to ClockworkMod as some folks in thread reported installing kernel without wipe cache/davlik. So I try to update it to 3.0.0.5 and it was successful but without result so I had to manually install 3.0.0.0 via console.
As I posted it originally on Q&A section when it happened none had issue and now everyone is having issue, POS I can't even access Dev thread as its says I need 10 posts when I have more I can't post it.
OptLynx said:
How did it work? Share what you did.
Click to expand...
Click to collapse
I just flashed ice glacier, went to rom manager, select all clockworkmod recoveries, select 2.5.1.4, and that's that
Sent from my HTC Glacier using XDA App
OptLynx said:
shortskoolbus it makes no diff. Now if you were missing the file then it would give you this error message "No legacy recoveries found, Are you connected to the internet?" and if you do have the file then it gives you this error message "An error occurred while flashing your recovery."
I was trying to install new OC kernel and came across this as I originally thought it maybe linked to ClockworkMod as some folks in thread reported installing kernel without wipe cache/davlik. So I try to update it to 3.0.0.5 and it was successful but without result so I had to manually install 3.0.0.0 via console.
As I posted it originally on Q&A section when it happened none had issue and now everyone is having issue, POS I can't even access Dev thread as its says I need 10 posts when I have more I can't post it.
Click to expand...
Click to collapse
Well I had the problem and went through the steps i described above to get it to work... So not sure.
Oh and it didn't say no legacy recoveries found, it said there was an error trying to flash. But it's working fine for me now after I out the img in that folder... so up to you guys if you want to try it.
Sent from my HTC Glacier using XDA App
Skunk2 DC said:
I've flashed it before, but decided to install evil's rom (reverted back to 2.5.1.2).. I didn't like it so I went back and restored CM7, now I can't flash 2.5.1.4.. I get an error saying "an error occurred while flashing your recovery". Please help! I'm new to these stuff, thanks guys.
Click to expand...
Click to collapse
its not just you, everyone is getting this error. Youll need to flash cwm 3 through fastboot or terminal emulator if you want to go to CM7 or MIUI until TrueBlue_Drew gets it fixed and releases an update.
Skunk2 DC said:
IT WORKED! Thanks again!
Click to expand...
Click to collapse
No Problem. Glad it worked. it was the only way i knew.
OptLynx said:
shortskoolbus it makes no diff. Now if you were missing the file then it would give you this error message "No legacy recoveries found, Are you connected to the internet?" and if you do have the file then it gives you this error message "An error occurred while flashing your recovery."
I was trying to install new OC kernel and came across this as I originally thought it maybe linked to ClockworkMod as some folks in thread reported installing kernel without wipe cache/davlik. So I try to update it to 3.0.0.5 and it was successful but without result so I had to manually install 3.0.0.0 via console.
As I posted it originally on Q&A section when it happened none had issue and now everyone is having issue, POS I can't even access Dev thread as its says I need 10 posts when I have more I can't post it.
Click to expand...
Click to collapse
Actually I am not sure what you are talking about OptLynx. What shortsloolbus said is 100% correct. If you are missing the image or it is in the wrong place it does not give you the "no legacy recoveries found" error. It will just say "error flashing recovery". And the reason it worked when people switched to a old Ice glacier rom is because IG isnt running the latest Rom Manager that has now changed the location of where it keeps the recovery images.
See my thread here for the new zip that places everything in the correct place. http://goo.gl/O5SlI
I am having some serious issues with my evo. I have tried 10 different methods, googled 100 different help guides and still no fix.
I had originally rooted my phone using simple root and put the "fixed" froyo rom on there. Everything worked fine, but I was outdated and having some really slow issues so I wanted to try a new rom...Fresh.
Well I tried a few methods, but I somehow reverted my evo back to a nonroot of the original OS. Whenever i go into hboot, my recovery does not work. I push the PC36img and load it, then restart then I attempt to go to my recovery where it gives me the error picture with the yellow/red triangle. I then select recovery (after pressing UP volume and powerbutton) and try to load update from sd card. Everytime I do that I get a Failed error.
I've tried to reroot using several methods off this website, I've done everything I can to get it working but can't. Any help would be GREATLY appreciated!
Try reflashing your recovery image.
BTW I have hboot 79.0 with S-ON, so it looks like I def became unrooted.
noweakness said:
BTW I have hboot 79.0 with S-ON, so it looks like I def became unrooted.
Click to expand...
Click to collapse
Not sure how it would have just unrooted itself. I would run an RUU from here: http://forum.xda-developers.com/showthread.php?t=884060
Then, I would re-root and start clean again.
Heaterz16 said:
Try reflashing your recovery image.
Click to expand...
Click to collapse
I have a recovery-ra.img, how do I tell it to flash it?
I pulled up this list of recovery files, is there a particular one I should use?
htt p://goo-inside.me/amon_ra/supersonic/
Heaterz16 said:
Not sure how it would have just unrooted itself. I would run an RUU from here: http://forum.xda-developers.com/showthread.php?t=884060
Then, I would re-root and start clean again.
Click to expand...
Click to collapse
Ok I downloaded the top item:
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed
Ran the exe, surprisingly picked up my phone and started the image update. My phone restarted and it forced closed the app on my computer. Now I have a new HTC logo for about 5 min on my phone not doing anything. Should I wait it out or restart my phone?
noweakness said:
Ok I downloaded the top item:
RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed
Ran the exe, surprisingly picked up my phone and started the image update. My phone restarted and it forced closed the app on my computer. Now I have a new HTC logo for about 5 min on my phone not doing anything. Should I wait it out or restart my phone?
Click to expand...
Click to collapse
I would have waited about ten minutes then restarted the phone. If the phone is stuck at the HTC logo, then I would go ahead and re-run the RUU.
Let me know how it turns out.
Heaterz16 said:
I would have waited about ten minutes then restarted the phone. If the phone is stuck at the HTC logo, then I would go ahead and re-run the RUU.
Let me know how it turns out.
Click to expand...
Click to collapse
ok, finally got it working. Had to restart the phone manually and try it on a different computer. It updated it to the newer version of android and hboot, thank goodness! That was the easiest and most productive thing I've been able to do so far, thanks!
Well now I try to boot into recovery and get the same error:
can't open /cache/recovery/command
Then I get :
E: signature verification failed
Installation aborted
When i try to load update from sdcard
noweakness said:
ok, finally got it working. Had to restart the phone manually and try it on a different computer. It updated it to the newer version of android and hboot, thank goodness! That was the easiest and most productive thing I've been able to do so far, thanks!
Well now I try to boot into recovery and get the same error:
can't open /cache/recovery/command
Then I get :
E: signature verification failed
Installation aborted
When i try to load update from sdcard
Click to expand...
Click to collapse
Ok, so, I think you said you got the RUU working which would have completely restored the phone to unrooted and stock from factory.
Now, you need to re-root your phone using one of the methods on xda. I used the manual method here: http://forum.xda-developers.com/showthread.php?t=829045. However, many people have had success with the one-click methods.
After you re-root (which will likely included installing a recovery), select a rom you want to try, boot to recovery, wipe and flash it. A great starter ROM is MikFroyo 4.6 or 4.5.
Try downloading the PC36IMG.zip from here: http://forum.xda-developers.com/showthread.php?t=705026
put that on the root of your SD card, then boot into HBOOT and it should find that PC36IMG.zip after a few seconds and ask if you want to flash it. Choose yes and let it finish. Should then be able to reboot into recovery.
ok thanks, i'll try it when I get back home
jesuspgt said:
Try downloading the PC36IMG.zip from here: http://forum.xda-developers.com/showthread.php?t=705026
put that on the root of your SD card, then boot into HBOOT and it should find that PC36IMG.zip after a few seconds and ask if you want to flash it. Choose yes and let it finish. Should then be able to reboot into recovery.
Click to expand...
Click to collapse
Ok, I tried this method...the filesize of pc36img.zip is only 3.5mb, but it didn't seem to work. It scanned the file then just went back to the hboot screen with my options never asking to flash.
I'm going to try to reroot using the other method now...
So I clicked the link and he forwarded to the autoroot.bat page so I used his method. It worked well (the 2nd time around) all the way until it started to push amon_ra_1.8-mod.... then after that it says rebooting into the bootloader, and it reboots into it and just says waiting for phone...
It does appear that my phone is rooted now, but my recovery is still not working. If I use ROM manager will it work since my phone is rooted or do I need to have a rooted ROM to run it off of?
noweakness said:
So I clicked the link and he forwarded to the autoroot.bat page so I used his method. It worked well (the 2nd time around) all the way until it started to push amon_ra_1.8-mod.... then after that it says rebooting into the bootloader, and it reboots into it and just says waiting for phone...
It does appear that my phone is rooted now, but my recovery is still not working. If I use ROM manager will it work since my phone is rooted or do I need to have a rooted ROM to run it off of?
Click to expand...
Click to collapse
Does your phone show s-off while in the bootloader? If so you should be able to run the FlashZip script and use that to flash the pc36img-sprintlovers zip. That one contains everything needed to bring your phone up to date and will leave you with a rooted rom and recovery.
Sent from my PC36100 using XDA Premium App
xHausx said:
Does your phone show s-off while in the bootloader? If so you should be able to run the FlashZip script and use that to flash the pc36img-sprintlovers zip. That one contains everything needed to bring your phone up to date and will leave you with a rooted rom and recovery.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
FINALLY! Thanks a million! My recovery is now working and it installed the built in sprinter lovers rom, I guess the anti-virus was stopping it so I disabled it and ran the flash script. I was able to install Fresh on there, just to try it out. I do have a few questions though:
1. I noticed after going through many pages that to update to a newer ROM version you don't always have to wipe clean, you can just install (or flash) the new update? I noticed in Fresh there is a built in app that does that. Is this true for most ROMS or only certain ones?
2. I assume I am using the RA recovery. I noticed the backup/restore feature on there. What exactly does that backup and when should I use it?
3. I've noticed I've been very low with memory on my phone (not SD card), I have about 258MB free. How can I clear space and when I mount my phone what files are important to keep and can I get rid of, is it okay to get rid of my rom.zip's and radio.zip's?
Thanks again to everyone, autoroot was def the most painless root ever.
noweakness said:
FINALLY! Thanks a million! My recovery is now working and it installed the built in sprinter lovers rom, I guess the anti-virus was stopping it so I disabled it and ran the flash script. I was able to install Fresh on there, just to try it out. I do have a few questions though:
1. I noticed after going through many pages that to update to a newer ROM version you don't always have to wipe clean, you can just install (or flash) the new update? I noticed in Fresh there is a built in app that does that. Is this true for most ROMS or only certain ones?
2. I assume I am using the RA recovery. I noticed the backup/restore feature on there. What exactly does that backup and when should I use it?
3. I've noticed I've been very low with memory on my phone (not SD card), I have about 258MB free. How can I clear space and when I mount my phone what files are important to keep and can I get rid of, is it okay to get rid of my rom.zip's and radio.zip's?
Thanks again to everyone, autoroot was def the most painless root ever.
Click to expand...
Click to collapse
1) You'll want to always wipe your cache/dalvik (I do everytime I'm in the recovery) but the Data depends on the ROM. Usually if you are going from one sense rom to another you are ok and the same for AOSP to AOSP. Going from Sense to AOSP you'll need to wipe data though.
2) Autoroot comes with a modified version of AmonRA, they are mostly just speed tweaks. To make a complete backup of your ROM select Boot (kernel), System (ROM), Data (Apps & Settings) and .android (apps on SD card)
3) You can delete the zips from your sd card if you don't need them but that's about normal for free memory.
[Solved!!]
When I open CWM I always get this error (see attached image) I have tried flashing an older version of CWM and I still get it... I have searched a TON to find the answer to this and it seems really common on Nexus S owners but I haven't found a solution... But because of this I can no longer flash anything.
Any ideas? I have fastboot erased EVERYTHING even tried fastboot flashing a Nandroid that I KNOW is a good backup... it seems to work but when I go to boot the device I get stuck that the bootscreen :/
[Solved!!!]
Anyone ever runs into this issue, flash CWM 2.X.X.X go to mounts, mount cache then format it. I couldn't mount cache in 3.X.X.X but it worked in 2.X.X.X. Not sure why this worked but whatever! lol
UPDATE!!!
SO the CWM Ghost is back, once again. Still nothing out of the ordanary done on my part, just started getting random FC's and boom there it's ugly mug is when I go to CWM to fix permissions...
BUT, here is the problem, I'm trying to fix it how I did last time and when I go to flash the new recovery in Fastboot via ADB I get this error:
sending 'recovery' <4000 KB>... OKAY [15.390s]
writing 'recovery' ...FAILED <remote: image update error>
I have tried a few different CWM recovery downloads... any ideas?
dcwiker05 said:
[Solved!!]
When I open CWM I always get this error (see attached image) I have tried flashing an older version of CWM and I still get it... I have searched a TON to find the answer to this and it seems really common on Nexus S owners but I haven't found a solution... But because of this I can no longer flash anything.
Any ideas? I have fastboot erased EVERYTHING even tried fastboot flashing a Nandroid that I KNOW is a good backup... it seems to work but when I go to boot the device I get stuck that the bootscreen :/
[Solved!!!]
Anyone ever runs into this issue, flash CWM 2.X.X.X go to mounts, mount cache then format it. I couldn't mount cache in 3.X.X.X but it worked in 2.X.X.X. Not sure why this worked but whatever! lol
Click to expand...
Click to collapse
You know, even though you solved it, I still think you should send a note to koush... the creator of CWM....
faux123 said:
You know, even though you solved it, I still think you should send a note to koush... the creator of CWM....
Click to expand...
Click to collapse
I sent him a private message detailing what led up to the error (and may or may not have caused it) as well as a link to this thread.
dcwiker05 said:
I sent him a private message detailing what led up to the error (and may or may not have caused it) as well as a link to this thread.
Click to expand...
Click to collapse
glad you fixed it, as many ppl have had this issue and have yet to recover from it!!! also, since you had fastboot set up i am assuming you have the 85.2007 engineering bootloader, correct?
i saw this preview post and all i could say is the cwm ghost got another one but it seems you got lucky!!!
irrelephant said:
glad you fixed it, as many ppl have had this issue and have yet to recover from it!!! also, since you had fastboot set up i am assuming you have the 85.2007 engineering bootloader, correct?
i saw this preview post and all i could say is the cwm ghost got another one but it seems you got lucky!!!
Click to expand...
Click to collapse
I would say "lucky" as well. but i'm wondering if the 2.x recovery image might be the fix for this problem. If one could "brick" their phone with the same symptoms as this phone. Then flash the 2.x recovery and see if it fixes the problems.
Yeah I have 85. Bootloader, because I read to flash CM7 it was best to have that installed. As for me fitting lucky yeah I guess I did, I didn't realize this was one of those "end all" errors lol. Specially since I really have no clue what possessed me to flash the old clock work. Basically I felt there had been known issues with 3.X. so I thought "what would it hurt?" Turns out it helped!!! I'm using the phone now and everything is 100%
Sent from the depths of hell cuz XDA's app is THAT good!!
dcwiker05 said:
Yeah I have 85. Bootloader, because I read to flash CM7 it was best to have that installed. As for me fitting lucky yeah I guess I did, I didn't realize this was one of those "end all" errors lol. Specially since I really have no clue what possessed me to flash the old clock work. Basically I felt there had been known issues with 3.X. so I thought "what would it hurt?" Turns out it helped!!! I'm using the phone now and everything is 100%
Sent from the depths of hell cuz XDA's app is THAT good!!
Click to expand...
Click to collapse
Nice i'm going to remember this thread.
TOPSIDE for some new developments. See OP for update...
I believe TrueBlue_Drew has a flashable zip for CWM 2.5.1.2 Have you tried that?
hello i need that recovery 2.___ for fix my problem same that! where i cant find_
vabeach454 said:
I believe TrueBlue_Drew has a flashable zip for CWM 2.5.1.2 Have you tried that?
Click to expand...
Click to collapse
I think I found what you are talking about HERE but from what I gather that needs your phone able to boot cuz it changes the recovery via Rom Manager. Sadly my phone doesn't boot, all I have is hboot and the 3.1.2.4 recovery available to use, both of which are basically broken. Thanks for the help and the idea though I really hope we come up with a way to fix this somehow. Any dev who needs a phone to experiment on, hit me up.
dcwiker05 said:
I think I found what you are talking about HERE but from what I gather that needs your phone able to boot cuz it changes the recovery via Rom Manager. Sadly my phone doesn't boot, all I have is hboot and the 3.1.2.4 recovery available to use, both of which are basically broken. Thanks for the help and the idea though I really hope we come up with a way to fix this somehow. Any dev who needs a phone to experiment on, hit me up.
Click to expand...
Click to collapse
Download zip from thread. Extract it to desktop or location of your choice. Go into the folders and find the recovery img that has 2.5.1.4 in the name. That is actually the 2.5.1.2 recovery. You can then re-name it to what ever you need to and push it to your device.
Hope this helps.
victorx said:
hello i need that recovery 2.___ for fix my problem same that! where i cant find_
Click to expand...
Click to collapse
Download this navigate to this (C:\Users\YOURUSERNAME\Recovery_2.5.1.2_to_RomManager.zip\sdcard\clockworkmod\download\mirrorbrain.cyanogenmod.com\cm\recoveries\) extract the recovery 2.5.1.2. Rename it recovery.img and try to flash it via adb in hboot (fastboot flash recovery recovery I BELIEVE that is the command I can't honestly remember but a quick google search will yield you a adb guide no problem
TrueBlue_Drew said:
Download zip from thread. Extract it to desktop or location of your choice. Go into the folders and find the recovery img that has 2.5.1.4 in the name. That is actually the 2.5.1.2 recovery. You can then re-name it to what ever you need to and push it to your device.
Hope this helps.
Click to expand...
Click to collapse
I can't push to my device which is the COMMAND problem. Now when I try to push via ADB I get an error saying write---FAILED. I have tried a few other tricks I have been told as well about like repartitionion the cache via ADB and that doesn't work either. So I hope this works for the OP