Long story short, I had the uk desire HD and loved it. My only complaint was the washed out photos and 2g service...(rogers)
But now Telus has launched their new hspa network in winnipeg.... so I could have it again in its full glory.....
I am on my phone right now (2g) so I can't research much...
How are the latest roms and kernels?
Any gingerbread ports yet?
Thx in advance
Sent from my Nexus S using XDA App
Mr.Kakarot said:
How are the latest roms and kernels?
Any gingerbread ports yet?
Click to expand...
Click to collapse
latest kernals are incredible - super battery life with such smoothness
Id try android revolution HD rom or if your looking for gingerbread, CM7 RC1 was just released for the DHD
Sweet, that's my current rom! Hahah.... thx
Sent from my Nexus S using XDA App
Mr.Kakarot said:
Long story short, I had the uk desire HD and loved it. My only complaint was the washed out photos and 2g service...(rogers)
But now Telus has launched their new hspa network in winnipeg.... so I could have it again in its full glory.....
I am on my phone right now (2g) so I can't research much...
How are the latest roms and kernels?
Any gingerbread ports yet?
Thx in advance
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
The Telus device appears to have different audio chipset, so current custom ROM's are resulting in the loss of sound to your device, which being a phone is currently a bit of a show stopper bug
ghostofcain said:
The Telus device appears to have different audio chipset, so current custom ROM's are resulting in the loss of sound to your device, which being a phone is currently a bit of a show stopper bug
Click to expand...
Click to collapse
whoa, this is horrible news.... and lame all at the same time.... so no one has a telus device, working properly? Sounds like a simple driver tweak, but I am no developer....
I was about to flash my dhd tonight, and it was one of the main reasons I picked it over the iphone 4..... this could be a short lived purchase.
Also, is it ALL sound? The handset won't even work? /cries
If you look through the "no sound" thread you will see a fellow member wrote a new kernel allowing you to use different roms. Im about to try revolution hd myself right now.
Is that you kakarot from Redflag? you and your phones
Or if you want to stick with stock for now without any other kernels, you can downgrade using the "downgrade from 1.8x/1.72" thread and make a gold card and go to town. Then search for the "randroid" telus rooted 1.84 rom.
ahahha, yes it is me.... lol, my phone issue is getting much worse it seems... as I now have 2 nice phones on 2 different companies....
are they "specific" roms only that have this fix? any links appreciated. thx again....
I am not a big fan of stock, I like to root/unlock/flash/custom/kernels... I had the desire hd uk version, but got tired of 2g.... thought I would do the telus one because of the new hspa network (which so far, the upload is amazing, but download is pretty darn average).
I think I will pm u
search for the "raidroid telus rom" and use that one for now. You can use the revolution rom and use the Telus kernel.
Trust me, it works with either of them. Until the source gets released (prob next week) thats all we have for now (which is quite a bit for a new phone)
Im rooted and unlocked on Rogers.
Yea, Thx. I tried it but the sound was horrible....so now I am on the stock one.... I need more flashing, Hahaha..... I'm on tells but my rogers works as well.
Sent from my Desire HD using XDA App
Mr.Kakarot said:
Long story short, I had the uk desire HD and loved it. My only complaint was the washed out photos and 2g service...(rogers)
But now Telus has launched their new hspa network in winnipeg.... so I could have it again in its full glory.....
I am on my phone right now (2g) so I can't research much...
How are the latest roms and kernels?
Any gingerbread ports yet?
Thx in advance
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Are you the same (famous) Mr.Kakarot from PS3 scene?
Im either kakarot or Mr.Kakarot on all sites I use....
Sent from my Desire HD using XDA App
Has anyone had a problem where after flashing your telus sim could not connect to the thelus network?
i have rooted and s-off and eng s-off. downgraded worked fine obviously. had the no sound problem but telus sim still worked. after flashing to a different ROM my telus sim no longer works in my DHD. seems to work with rogers and bell though. my sim also works in other DHD's but not mine.
any help is greatly appreciated!
Related
Hi,
I am currently a Milestone (running CM7) owner and am looking to transition to a faster more modern phone.
I don't like the "feel" of the Desire Z and REALLY need a slide out keyboard.
Here go a few "basic" questions that am hoping the regulars here can answer.
1)
Has anybody heard of plans for a MS2 that works on the 850/1900 3G+ bands typically used by ATT/Rogers/Telus/Bell in North America (and a few other providers around the world. I would even accept rumors at this point...
I don't want to end up with EDGE connectivity on an imported phone.
2)
What is the state of ROMs and Devs for this phone. I could not find much in the dev section. Is anything available? Is anything secretly in the works?
3) Are people happy with the "feel" and build quality of the phone? I am pretty rough on my devices so I need something solid (Gorilla glass and solid keyboard are NECESSARY).
Thanks
1. I think ppl in Brazil are on 850/1900 3G+ type bands and they are able to use 3G on this phone, so I believe the answer should be yes.
Though some1 from that region (or some1 using this phone in US) can confirm..
2. There is one custom ROM right now: Argen2Stone by santiemanuel. You can check about it in dev section. mikevhl and owain are trying to build another ROM. Plus we had some initial interest from Angdroid for Fission but haven't had any updates from him of late.
3. I'm pretty happy with the build quality of the phone (it ain't light though, but then thats what makes the feel solid and sturdy). There are no scratches on my phone screen till now and I have been using it for almost four months and I don't use any covers for it.
Hope thats of some use..
sahilarora911 said:
1. I think ppl in Brazil are on 850/1900 3G+ type bands and they are able to use 3G on this phone, so I believe the answer should be yes.
Though some1 from that region (or some1 using this phone in US) can confirm..
2. There is one custom ROM right now: Argen2Stone by santiemanuel. You can check about it in dev section. mikevhl and owain are trying to build another ROM. Plus we had some initial interest from Angdroid for Fission but haven't had any updates from him of late.
3. I'm pretty happy with the build quality of the phone (it ain't light though, but then thats what makes the feel solid and sturdy). There are no scratches on my phone screen till now and I have been using it for almost four months and I don't use any covers for it.
Hope thats of some use..
Click to expand...
Click to collapse
That was of great use. Thanks.
I will check out the local carriers in brazil and am greatly reassured about build quality. My MS1 is heavy but, like you said, that is the reason i love it.
Sent from my Milestone using XDA Premium App
Plus there is a baseband switcher app (i.e. if you are planning to purchase the phone from say Europe) which switches the baseband from 900/1800 to 850/1900 and vice versa.
It is available on this forum in the dev section as well.
sahilarora911 said:
Plus there is a baseband switcher app (i.e. if you are planning to purchase the phone from say Europe) which switches the baseband from 900/1800 to 850/1900 and vice versa.
It is available on this forum in the dev section as well.
Click to expand...
Click to collapse
Really? Are you certain what this app does? To my knowlege, motorola does not include the hardware to do this, except on PRO versions of phones. On the Milestone 1, such apps are used to switch euro roms to north american baseband...but not euro phones to north american 3g.
But my Q9h pro used to work in this way, so i will take a look. Thxx for the tip.
Sent from my Milestone using XDA Premium App
Caz666 said:
Really? Are you certain what this app does? To my knowlege, motorola does not include the hardware to do this, except on PRO versions of phones. On the Milestone 1, such apps are used to switch euro roms to north american baseband...but not euro phones to north american 3g.
But my Q9h pro used to work in this way, so i will take a look. Thxx for the tip.
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
I believe it won't work with 3G on T-mobile.. That uses 1700 base AWS for GSM. The baseband app only switches between 900/1800 and 850/1900.. Those are the radios that Milestone 2 has I guess..
Thats the extent of my knowledge.
This is pretty sweet if true. I could not find the app in the dev section, but i am now on vacation and have limited time for research.
I dont need tmo...just something thhat gives me 3g or more on ATT and Rogers.
Sent from my Milestone using XDA Premium App
Vodafone Australia has announced the FOTA of 2.3 for the Desire HD today.
Updated mine today! So happy.
Updated mine to gb a few hours ago, everything is running fine. No issues so far.. Fingers crossed lol.
Sent from my Desire HD using XDA App
Not surprisingly so does 3 as well, just downloading it now...
Sent from my Desire HD using XDA App
Via HTC Australia's Facebook Page
Great news! Australian HTC Desire HD owners are getting an update to Gingerbread (Android 2.3) starting from today. Over the next few weeks, your handsets will receive a notification inviting you to update the phone software. We recommend connecting to a WiFi network to download the update. Thanks for your patience and we hope you enjoy Gingerbread.
Click to expand...
Click to collapse
I upgraded with the RUU a couple of weeks ago, but it's good to see everyone else is finally getting it.
Well after a some testing it seems that the update from vodafone aus also has the poor wifi connectivity bug.
I have also noticed that the dialer seems to be using quite a bit more battery usage than before the update. it seems vodafone have put some of their crap-ware in the dialer package and that is causing the problem.
Hows everyone else's update experience going?
Sent from my Desire HD using XDA App
sarge101 said:
Well after a some testing it seems that the update from vodafone aus also has the poor wifi connectivity bug.
I have also noticed that the dialer seems to be using quite a bit more battery usage than before the update. it seems vodafone have put some of their crap-ware in the dialer package and that is causing the problem.
Hows everyone else's update experience going?
Click to expand...
Click to collapse
Battery life and the absence of bloatware are two reasons why I switched to CyanogenMod 7. (As well as the extraordinary wait for the update to 2.3.)
If your phone is rooted you can flash a new radio and RIL to get better wifi connectivity (and 3G/HSPA). If you're interested, these are available in the DHD Development forum.
I now get 3-4 days from a single charge. I hope I don't need warranty because it's voided...
I've been using custom ROMs soon after getting my phone, I wonder do I need to revert back to Vodafone AU ROM to receive the update?
Ya updated mine yesterday (3 Australia) but sad that it don't come with Sense 3.0 ...
Sent from my Desire HD using XDA App
sromer said:
I upgraded with the RUU a couple of weeks ago, but it's good to see everyone else is finally getting it.
Click to expand...
Click to collapse
Which RUU did you use? I've been asking Vodafone if they have one to flash.
I actually have been trying to install but I keep getting an error when it re-starts for the installation process. Gets about a 1/4 way then I get a red triangle with an exclamation point in the centre...
Any pointers or suggestions?
Sent from my Desire HD using XDA Premium App
Dands said:
Which RUU did you use? I've been asking Vodafone if they have one to flash.
Click to expand...
Click to collapse
I have an unlocked DHD that i imported from the UK before they were out in aus
Hi all! Long time ago my friend got the HTC HD2 and he told me about chaging to Android and I be able to using a Gingerbread version (can't recall who made it). After fiding that this device use flash player I decide to get rid of my old Iphone and get a HD2 myself but when I search for the build I couldnt find it, instead I find the Stock Desire NAND ROM which I love it. After doing some reading on the forums I found out that version is from 2010 so I been searching for a new one but they look different (I bet mods) and also none have 3G data.
What im asking if somebody could point to a stock Desire ROM or Desire S that have 3G data and dunno if possible but be able to buy stuff off market because when I try to buy something I get an error. Thanks in advance.
Pretty much any ROM you see on the nand roms page supports 3g data and will let you download paid apps, just choose your favourite!
Sent from my HTC Sensation Z710e using XDA App
Thanks for the reply, I been trying lots of ROMS but only get Edge, never got a 3G icon or something that let me know im running faster, I try MIUI, Ginger, C7... I love the DesireHD ROMS but nothing, all gives me the E...
Slackys said:
Thanks for the reply, I been trying lots of ROMS but only get Edge, never got a 3G icon or something that let me know im running faster, I try MIUI, Ginger, C7... I love the DesireHD ROMS but nothing, all gives me the E...
Click to expand...
Click to collapse
Try the desire build in post 4 of this thread.....i use it and 100% 3G data all the time and zero lag, nice and smooth etc.
http://forum.xda-developers.com/showthread.php?t=1062881
matt
Slackys said:
Thanks for the reply, I been trying lots of ROMS but only get Edge, never got a 3G icon or something that let me know im running faster, I try MIUI, Ginger, C7... I love the DesireHD ROMS but nothing, all gives me the E...
Click to expand...
Click to collapse
try typing *#*#4636#*#* in your phone dialer
Then navigate to phone info, scroll down and choose your prefered setting.
initially I got wcdma prefered after flashing a rom...now I use gsm(auto).
seems better for me.
Tytung's gingerbread ROM is a but buggy
Thanks all for the help but I still dont get any progress, I play with all settings and stuck on EDGE. Im using a GoPhone sim card from AT&T and I know works since on the other phone goes to 3G instantly when home (other places I go back to E)
http://shiftpda.com/showthread.php?tid=4137 ....... try this amazing gingerbread 2.3.3 with sense 3.0 rom
Also try that and same thing... I give up I cant understand why this HD2 don't wanna get into 3G mode.
[UPDATE]
After reading more I discover the TMOBILE version of the HTC HD2 DON'T get into the ATT 3G network no matter if I change the radio firmware since is a hardware issue. Thanks all who try to help me.
I made it work wifi-calling on rom Froyo by Laszlo 2.2.1 and work
I leave the update for that use HTC Dream G1 T-mobile U.S with Froyo by Laszlo 2.2.1
Warning I am not responsible if this affects your current rom or otherwise cause damage to your phone
for those who have the rom Froyo by Laszlo 2.2.1 reboot in recovery make a backup and flashing the Htc-G1-wifi-calling-for-froyo-2.2.1-signed.zip
to try another rom 2.2.1 delete biuld.prop from the Htc-G1-wifi-calling-for-froyo-2.2.1-signed and replace it with the rom build.prop to try and add this to the build.prop
#rild.libpath=/system/lib/libhtc_ril.so
rild.libpath=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
ro.ril.gprsclass = 10
Click to expand...
Click to collapse
Awsome!!!!
Just tried it and it works great!
#2! said:
Awsome!!!!
Just tried it and it works great!
Click to expand...
Click to collapse
I thought no one would try it.
Thanks
Since laszlo is based on cm6 would this also work on a cm6 ROM? I am running the last cm6 nightly which I like a lot.
sent from XDA app
FireRaider said:
Since laszlo is based on cm6 would this also work on a cm6 ROM? I am running the last cm6 nightly which I like a lot.
sent from XDA app
Click to expand...
Click to collapse
might work would only be build.prop remove and replace it with the CM6 and add the necessary information to the rom build.prop CM6. and remember the wifi-calling is only for T-mobile user
Wow, thanks a million! I was desperate to get wifi calling on my G1 because I live in a half-basement apartment, so my signal is pretty much useless. I switched to Froyo by Lazlo from straight CM6 because the latter was being laggy anyway. That took some doing, but once I got that all straightened out, I flashed your zip, opened up the app, and flipped the switch. Bam! Wifi calling!
I don't know who is behind building this, but thanks for pointing me to it and recommending Froyo/Lazlo. You made my night.
socioking said:
might work would only be build.prop remove and replace it with the CM6 and add the necessary information to the rom build.prop CM6. and remember the wifi-calling is only for T-mobile user
Click to expand...
Click to collapse
I am running tmo so I will give it a shot eventually. I have 3 of these G1s that I play with and usually only keep one running at a time due to my "improvements".
sent from XDA app
Testing this now. I hope this work. It will help me TONS!
This is the best thing to happen to my G1 since I put Lazso on it. You have done a Great Job with this !!!!!
I have used this all day long on 10 calls and everyone has said the calls are clear. Also it works great with my bluetooth!!!!
I am sending this link to everyone I know that has a G1.
NOTE: if this thread was in the developement it would get alot more exposure!!!
thanks
Thank you for this. Works almost perfectly, but theres one problem.
After flashing this it causes roaming and 3g not to work.
I go to wireless settings>mobile networks>Network operators
Then get error searching for network.
Flashing laszlo 5.2 fixes the problem, but then wifi calling doesnt work.
Can someone help me? I really want wifi calling and being able to search for networks to work.
Anyone else get this to work with other roms? It causes the wifi to stop working on any other rom besides laszlo.
Hi there m8´s...
I have now edited this and added the answers to my questions...
Btw:
I have the 3G device...
And I am not using 3G or gsm at all...
Question:
Can i then without any problem use the "WiFi only" roms ??
Answer:
Yes, you can use the roms and kernals for the WiFi model (7510) on your 3g device (7500)...
You WILL loose 3g and gsm in the process...
- at least until you flash a 7500 kernal and ROM again...
Question:
Do i have to use the 3G versions for my device ??
Answer:
Only IF you use 3g or gsm, if not then go ahead and flash WiFi only on your device...
I think it should work.
I have seen a guy who accidentally (from my impressions) applied 3g only rom/kernel and that disabled 3g but i think the rest was ok.
I whould give it a try - if you have problems you can go back to the stock rom.
NEVER EVER take advise from people who just "think" they know. They are just guessing and really have no idea.
It is not recommend to flash any 3rd party ROM onto the Galaxy Tab 10. None of them are as stable or reliable as the stock ROM. It is recommended to avoid them.
5thElement said:
NEVER EVER take advise from people who just "think" they know. They are just guessing and really have no idea.
It is not recommend to flash any 3rd party ROM onto the Galaxy Tab 10. None of them are as stable or reliable as the stock ROM. It is recommended to avoid them.
Click to expand...
Click to collapse
Do as he says, never take his advise cause he thinks he knows something.
If you not caring about 3G support, I recommend checking out Tasks ROM, the last 5-6 pages talk about exactly what your looking for.
nakedninja42 said:
Do as he says, never take his advise cause he thinks he knows something.
If you not caring about 3G support, I recommend checking out Tasks ROM, the last 5-6 pages talk about exactly what your looking for.
Click to expand...
Click to collapse
See the last few pages of that thread. ROM is running GREAT on my 3G tab, and is overclocked with pershoot kernel. Just follow my instructions exactly and be sure to flash the proper kernel if you wanna overclock!
You WILL lose3G though.
pshdo said:
Hi there m8´s...
I have the 3G device...
I am not using 3G at all...
Can i then without any problem use the "WiFi only" roms ??
- or do i have to use the 3G versions for my device anyway ??
Click to expand...
Click to collapse
If you're not using 3G, flashing the wifi only roms should work for you.
And I say thats no problem. You can simply use it without being afraid.
Just gonna lose 3G ability.
I have now a WiFi only rom in my 3G device, and it is working great...
NO PROBLEMS AT ALL...
And now i also use the 1.4ghz 7510 kernal...
It is working great...
Sent from my GT-P7510 using xda premium
pshdo said:
And now i also use the 1.4ghz 7510 kernal...
It is working great...
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
did you loose 3g then ?
hajen78 said:
did you loose 3g then ?
Click to expand...
Click to collapse
of course he did. Thats why it's wifi only.
hajen78 said:
did you loose 3g then ?
Click to expand...
Click to collapse
Yes I did loose 3g, I do not have a sim card in the gadget anyway, so no problem for me...
Sent from my Desire HD using xda premium