Ok so I had my Fascinate running on the EB01 Kernel and using the stock ROM. I tried Kaos v5 ROM and tested it. Since many things arent working in that version i decided to go back to my stock EB01. When i wiped the data and cache and i restored my nandroid, it was mixed up with Kaos ROM still. So i decided to flash the EB01 kernel again through Odin and now my phone just keeps FORMATING/DELETING DATA. It stuck after the Samsumg logo and wipes data and reboots and keeps doing the same thing.! I dont know what to do i've tried everything i can think of and many things that i have make worked but im out of ideas! someone please help me out to fix this problem. (Hopefully my phone isnt completely gone!)
This is a hell of Development thread man congratulations
thatdudebutch said:
This is a hell of Development thread man congratulations
Click to expand...
Click to collapse
yeah man sorry but idk wat to do anymore...
Did you disable voodoo? May have a date with ODIN full. Going back to D101 usually fixes most problems, but, you can try the DL09 package first.
Sent from my SCH-I500 using XDA App
I don't understand why people are so hesistant to use the full odin packages. 99% of the time it will fix your problems and in about 5 min you are back up and running.
DI01
DL09
You could also try this odin package to get you straight up to EB01 though I haven't tried it myself
EB01
I had a similar issue restoring a backup from CM7 alpha, phone just boot looped. The solution for me was to battery pull, go back into recovery, rewipe, and reflash an EB01 rom (i used superclean 2.4). Let it boot up, then reboot recovery and restore your backup.
blacknet101 said:
yeah man sorry but idk wat to do anymore...
Click to expand...
Click to collapse
How about post it in the correct place so people don't get pissed and ignore it?
ODIN back to stock. DI01 usually works for me. Or try one of the EB01 odin packages w/ root and CWM
Be sure to make several Nandroid backups because sometimes one is messed up. (Thanks Jensiz )
THANKS
Yeah i got it to work i just went and flashed DL01 and it worked perfectly thanks guys!
Related
I had installed Axura 2.0.6 and Voodoo Lag Fix.
I noticed my GPS was no longer working so disabled the Voodoo lag Fix.
It was causing me problems, without knowing i decided to ODIN my Vibrant while Voodoo was still installed. After a long period of a Black screen of death and various problems. I got it finally but my wifi wasnt working buttons were inverted wouldnt recognize my sim card and i couldnt mount the phone. I attempted to do a data wipe but was unable to saying it was denied. I have no idea what to do and ive been up for hours. I am on Windows Xp and im just going crazy. Im attempting to use adb but my knowledge with adb is minimal as well. Please can anybody please please help me.
This is why I hate voodoo. Not that this happens, but because nobody reads up on how to fix it. Download eugenes froyo that doesnt brick from the bible sticky. Click repartition in odin and flash it. Then flash to regular jfd with repartition unchecked.
Sent from my SGH-T959 using XDA App
reodin stock rom, sounds like you odined an i9000 rom...
try something like this:
http://forum.xda-developers.com/showthread.php?t=833024
not entirely the right way to go about asking for help, starting a new thread, but i know what its like to be tired and freaked out... doing the above should take care of immediate problem
EDIt: yeah do the eugenes froyo that doesnt brick thing first for good measure
odin eugenes froyo that doesnt brick with repartion clicked then without turning on the phone odin jfd stock
diaa08 said:
reodin stock rom, sounds like you odined an i9000 rom...
try something like this:
http://forum.xda-developers.com/showthread.php?t=833024
not entirely the right way to go about asking for help, starting a new thread, but i know what its like to be tired and freaked out... doing the above should take care of immediate problem
EDIt: yeah do the eugenes froyo that doesnt brick thing first for good measure
Click to expand...
Click to collapse
im sorry for opening a new thread but im so stressed out=(
i cant even find the stupid download link for his rom since he dropped all support.
wildklymr said:
This is why I hate voodoo. Not that this happens, but because nobody reads up on how to fix it. Download eugenes froyo that doesnt brick from the bible sticky. Click repartition in odin and flash it. Then flash to regular jfd with repartition unchecked.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
do i use the pit file i already have?
or does the eugene_2e_jk2_froyo already provide that?
Also found that my internal storage is only 2 gigs
i really screwed my phone up=(
After
Repartitioned the phone with Eugene 23 jk2 froyo and it stated data wipe failed
currently in process of flashing regular jfd.
will post updates and sorry for noobness i swear never again will i do this.
also thank to everyone that is helping me out
stephenj37826 said:
odin eugenes froyo that doesnt brick with repartion clicked then without turning on the phone odin jfd stock
Click to expand...
Click to collapse
1. Do exactly what he said. Use 512.pit
2. For god's sake please don't install a lagfix unless you are 100% sure it's compatible with the ROM. READ the description of ROMs.
3. Please post in the right forum next time.
Well
It didnt work.
The applications i had are still there
i still dont have access to my phone
wipe data failed.
no internet at all even after putting back apn settings
sk8erdude525 said:
It didnt work.
The applications i had are still there
i still dont have access to my phone
wipe data failed.
no internet at all even after putting back apn settings
Click to expand...
Click to collapse
Did you check repartion when you load the pit file?
After you've repartitioned it, did you UNCHECK the box and then load JFD?
.
MilkPudding said:
Did you check repartion when you load the pit file?
After you've repartitioned it, did you UNCHECK the box and then load JFD?
Click to expand...
Click to collapse
Yes sir i did, and both times it stated Wipe Data Failed in red letters.
and now everytime one boots up it states a fc from rom manager
sk8erdude525 said:
Yes sir i did, and both times it stated Wipe Data Failed in red letters.
and now everytime one boots up it states a fc from rom manager
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=8698655&postcount=150
Try this if all else fails. And please be very careful with any lagfix next time. It's dangerous to mess around if you don't know what it does to your phone.
sk8erdude525 said:
Yes sir i did, and both times it stated Wipe Data Failed in red letters.
and now everytime one boots up it states a fc from rom manager
Click to expand...
Click to collapse
Did you flash the JK2 rom or Eugene's froyo that does not brick? JK2 won't work.
http://forum.androidspin.com/showthread.php?p=15555
Sent from my frozen yogurt powered Vibrant
And I forgot: don't check re-partition when flashing Eugene's froyo. Check it when flashing JFD. You will get an error message after flashing froyo that does not brick. That's normal.
Yay
I finally got it to work.
Thank you guys and have a good day.
stephenj37826 said:
odin eugenes froyo that doesnt brick with repartion clicked then without turning on the phone odin jfd stock
Click to expand...
Click to collapse
duh i was half asleep lol. sorry for telling you backwards man.
I don't get it. how come he had all this trouble if he disabled voodoo in the first place?
Sent from my SGH-T959 using XDA App
Because
i had flashed another rom without disabling voodoo first, then my computer wouldnt recognize the phone and i partioned the internal sd with the actual computer and it was just a mess but thank god to everyone that helped me.
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
What are you running? It may be a permissions problem. Have you tried uninstalling it and reinstalling it?
I'm having a similar issue. Help!
jpolzner said:
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
Click to expand...
Click to collapse
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
I'm thinking it has something to do with flashing either the De-Binged browser or the new market update. Maybe something in the framework-res is getting hosed up?
I just did a wipe and reflashed plain old EB01 and I'm not going to flash any changes and see if the problem comes up again.
emortio said:
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
Click to expand...
Click to collapse
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
brettdacosta said:
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
Click to expand...
Click to collapse
I wonder if it has to do with the type of EB01 we're using or the CWM. I flashed CWM red via Odin, rather than updating via Rom Manager or update.zip. Also I used the EB01 Walkthrough in the fascinate developers section, the link is:
http://forum.xda-developers.com/showthread.php?t=948722
***UPDATE***
I resolved the problem... I think. I noticed there was a difference in the file names of the EB01 Modem in the walkthrough link I provided on the last line of the paragraph above and the EB01 Modem given in the original EB01 stock thread (http://forum.xda-developers.com/showthread.php?t=948679). I flashed with the eb01a_modem.tar given in the stock thread and then upgraded to Super Clean with Voodoo (v. 2.4 as of this writing). The market DID restore all the apps, before I was able to stop it, but after I restarted, there were no force closes nor were there any loss of preferences. I hope the modem issue was what was wrong...
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
I think it's a dbdata partition issue. I can't say how to fix because it's above my paygrade, but you may have to wait until it is officially released.
jpolzner said:
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
Click to expand...
Click to collapse
Try the Odin back to stock...DI01, wipe everything. Reroot and and get cwm. Then ODIN EB01 Modem Tar followed by super clean 2.4 install through cwm. Be sure to wipe data and cache before flashing super clean.
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
jpolzner said:
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
Click to expand...
Click to collapse
I suggest that typically before anything else b/c it seems to help most. I've never experienced these issues but many suggest this is a viable method to remedy certain problems. Don't see why you couldn't try the odin DL09 all-in-one and wipe the hell out of it and try again. Good Luck.
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
jpolzner said:
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
Click to expand...
Click to collapse
I believe it's currently inconclusive. There is speculation about exactly what causes it hence the reason I suggest wiping everything and then flashing the most recently provided stuff. That way it'll narrow things down. Someone can correct me, but if you odin back to stock, I'm 99% sure super cleans 2.4 voodoo kernel includes the new cmw. I was on green cmw unitl I flashed the seperate voodoo kernel posted by jt. I haven't had any issues.
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
I've never run Voodoo on my phone, but I did my initial install of EB01 with one of the older "Green" CWM versions.
adrynalyne said:
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
jpolzner said:
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
Click to expand...
Click to collapse
No...are you running voodoo? And what rom are you using?
EB01 Fully Bloated, Non-Voodoo Kernel
Baseband version: S:i500.04.V.EB01
Kernel version: 2.6.32.9
Build number: SCH-I500.EB01
http://forum.androidcentral.com/ver...roms-w-root-new-clockwork-updated-2-15-a.html
Try This...
This will hopefully repartition and clean dbdata corruption. BTW, I couldn't get 2.2 to run on my phone until I odin flashed a ROM which allowed me to then flash Adrynalyne's 2.4.
DI01, DJ05, DL09 did not work for the fix. Eclair worked fine, but Froyo would not work until I flashed a 2.2 odin.
Do I need to check the "Re-Partition" option in Odin when flashing or does it do it automatically?
I have tried everything I can think of. Tried different radios, different ROM's, everything! I'm at wits-end! Every time I upgrade from DL09 to ANY 2.2 leak or ROM (and I mean ANY), the install goes smoothly but after the boot the screen sleeps and will not wake. I have duplicated it on every available leak/ROM and none work. Please! Does anyone have any ideas? I want some of that Froyo goodness.
Did you wipe both data and cache from CWM at least twice before installing any Froyo rom?
Posted from my EB01 SuperClean Fascinate with Voodoo
Are you talking about the first boot after loading the ROM, and the screen is black? The first boot always takes longer, and most of these ROMs don't have a boot animation. Are you letting the phone boot up completely?
Odin to DI01. Root with Adryn's new root instructions. Flash EB01 modem and your ROM of choice. Should fix everything like it did for me.
Yes. I wiped and wiped.
Kevin Gossett said:
Are you talking about the first boot after loading the ROM, and the screen is black? The first boot always takes longer, and most of these ROMs don't have a boot animation. Are you letting the phone boot up completely?
Click to expand...
Click to collapse
No, not the first boot. It boots completely and works just fine until it sleeps and then the phone wakes but the screen won't.
stereoblind said:
Odin to DI01. Root with Adryn's new root instructions. Flash EB01 modem and your ROM of choice. Should fix everything like it did for me.
Click to expand...
Click to collapse
Ahhhhh. Now there's something I haven't tried. I will give this a shot and post the result. Thank you for your help in advance!
still dead
Ok. I Odin restored DI01 and rebooted. Everything went fine. I then installed the EB01 modem and CWM-all via odin. All good so far. I booted into Red CWR and installed super clean EB01 and rebooted. Again, the screen will NOT wake from sleep! I'm gonna pull my hair out!
HELP!
toothjockeynd said:
Ok. I Odin restored DI01 and rebooted. Everything went fine. I then installed the EB01 modem and CWM-all via odin. All good so far. I booted into Red CWR and installed super clean EB01 and rebooted. Again, the screen will NOT wake from sleep! I'm gonna pull my hair out!
HELP!
Click to expand...
Click to collapse
This might be a pain, but try doing all of that again but this time flashing a stock EB01 rom. Play around with it and make sure there's no issues, then flash a superclean rom.
That's what I did when I had your issue and it was resolved like that.
ok. first off.
I just switched from dj05 voodoo with a sc rom, to sc2.3 voodoo eb01.
I made a back up in rom manager of dj05, and a tibu back up, but tibu, for some reason, didn't save to my sd. so I tried to go back to the dj05 back up, but it wouldn't boot. just got stuck on the samsung screen.
so I pushed dj05 back, tried to restore the back up, and still got stuck on the samsung screen. any ideas how to get this back?
ok. next. on sc2.3 eb01, I had neongt theme, decided I wanted revolution, so I downloaded revolution. put on sd, flashed, and boot looped. flashed neon gt again, it booted, and now I have both themes. dialer/menus from revolution, drop down from neon, etc. how would I go about getting just revolution?
lol ok next. so I kinda don't like how things are going with my current setup. would you recommend going with aosp v.7? and if so, would I push the eb01 voodoo kernel through odin then flash the rom through cwm?
thanks in advance for any help!
jordan
Sent from my SCH-I500 using XDA App
Won't boot back to dj05 because you probably didn't do an odin complete back to djo5. I'm betting you just tried flashing the rom ontop of your eb01 modem.
Your theme/rom issues are stemming from a lack of wiping data more then likely before flashing over the new rom/themes.
If you're running voodoo, try super clean 2.4 w/ voodoo...really nice and fast.
jenisiz said:
Won't boot back to dj05 because you probably didn't do an odin complete back to djo5. I'm betting you just tried flashing the rom ontop of your eb01 modem.
Your theme/rom issues are stemming from a lack of wiping data more then likely before flashing over the new rom/themes.
If you're running voodoo, try super clean 2.4 w/ voodoo...really nice and fast.
Click to expand...
Click to collapse
I've pushed dj05 back via odin and still wouldn't boot.
what all do i need to wipe for different themes? I've wiped dalvik/data/battery/the other one under data that I don't remember right now.
do you have links for voodoo kernel and sc2.4? and steps? like push voodoo with odin and flash sc2.4 through cwm? and what do I wipe?
another problem I forgot about- i cant use tibu on sc2.3 cuz of a busy box problem, and busy box from market won't work.
Sent from my SCH-I500 using XDA App
jordanzink said:
I've pushed dj05 back via odin and still wouldn't boot.
what all do i need to wipe for different themes? I've wiped dalvik/data/battery/the other one under data that I don't remember right now.
do you have links for voodoo kernel and sc2.4? and steps? like push voodoo with odin and flash sc2.4 through cwm? and what do I wipe?
another problem I forgot about- i cant use tibu on sc2.3 cuz of a busy box problem, and busy box from market won't work.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
To be honest, I've never used a backup software. I manually copy and paste. any apps I download to a file on my computer then transfer them back over.
Follow these steps though.
1. Charge the battery till it reads 100%
2. Place Super Clean voodoo 2.4 on your SD card on your phone and enter download mode.
3. Plug in phone to odin and using PDA flash over eb01 modem
4. Go into CWM wipe data twice/bat statistics and cache...then select locate super clean 2.4 w/ voodoo and install and enjoy.
If you already have the eb01 modem set up, just download the sc 2.4 w/ voodoo and place it on your sd card and reboot into cwm. flash data at least twice and cache on a full charge. Then locate the zip file and extract/load via cwm. Should be good.
ok thanks. once there, should everything be wiped enough to be able to flash revolution theme on?
Sent from my SCH-I500 using XDA App
jordanzink said:
ok thanks. once there, should everything be wiped enough to be able to flash revolution theme on?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
If you're going to flash a theme over sc 2.4, I'd still wipe data twice and cache...that's just me though. It's always best to start fresh you know?
yeah gotcha. can you help me with the busy box issue? or should I just pull all the apps from my phone to my computer?
Sent from my SCH-I500 using XDA App
jordanzink said:
yeah gotcha. can you help me with the busy box issue? or should I just pull all the apps from my phone to my computer?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I've never really pursued anything that way. I run on flashed phones so there's alot more chances for things to get f'd up so I've always done things the extra cautious way unfortunately. That way if I get a corrupted sd card error or anything along the lines, I'm secured. Plus I keep a change log for prl and modem settings.
Hello, I am travelling and am in urgent need of fixing my mistake. I updated to EB13 and lost my root, so I rooted my epic with the EB13 fix. Everything was fine. THEN I saw the EB13 fix that also updated CLockwork and allowed you to reformat into EXT4. I did this, but somehow I am now unable to boot the phone. It hangs at the "samsung" screen.
I believe that I caused this by forgetting to flash the EB13 DualFS Kernel before rebooting... but am not sure.
Any ideas? Worst case scenario, would factory reset through clockwork fix this or am I screwed now that I went to EXT4.
Just use Odin to go back to the stock EB13. Everything will work fine after that.
scourgedirge said:
Hello, I am travelling and am in urgent need of fixing my mistake. I updated to EB13 and lost my root, so I rooted my epic with the EB13 fix. Everything was fine. THEN I saw the EB13 fix that also updated CLockwork and allowed you to reformat into EXT4. I did this, but somehow I am now unable to boot the phone. It hangs at the "samsung" screen.
I believe that I caused this by forgetting to flash the EB13 DualFS Kernel before rebooting... but am not sure.
Any ideas? Worst case scenario, would factory reset through clockwork fix this or am I screwed now that I went to EXT4.
Click to expand...
Click to collapse
Yeah the problem is that u forgot to flash the dual rfs ext4 kernel. So ya u are screwed. U are going to have to flash back with odin to di18 then u have to root with the 1 click root 2.5.x.x the flash the pre rooted eb13.zip update then re root with the 1 click root cwm3. Before u re boot u have to flash the kernel. The u should b good to go with eb13 ext4. Good luck and I hope this works out for u. I went through the same thing and that's what I did.
Sent from my SPH-D700 using XDA App
Whew! Thanks a lot guys. I am preparing to try this fix right now.
On a higher note, I am in Vegas, so spending a night doing this (even if I had to buy a new phone tomorrow) was probably cheaper than going out.
Yeah I kinda did the same thing I flashed the kernel but did reflash my rom. It booted up but that was about it kept hanging up screen going blank after about 20 seconds. Was a mess but a reflash of eb13 and my old rom got me going again.
Sent from my SPH-D700 using Tapatalk
I now have a working phone! Thanks for all the help... now I just have to get root AND ext4 going, then I will be happy.
i think i bricked my fone.....its stuck at the samsung screen..im able to boot clockwork but my fone wont boot up...i see suggestions for odin...but im not sure how to use it. pleaseeeeeeee help!!!
mikej826 said:
i think i bricked my fone.....its stuck at the samsung screen..im able to boot clockwork but my fone wont boot up...i see suggestions for odin...but im not sure how to use it. pleaseeeeeeee help!!!
Click to expand...
Click to collapse
pm me I'll help u personally
Lol im glad to see the search works