Database Users

EVO Not showing 1x / False 3G

Ok so I have been messing around with the evo and doing a new rom for the whole cricket thing.
One thing i have noticed while doing this is that the EVO DOES NOT drop down to 1x at all. So i decided to write a 1x PRL to the phone. The phone reports that it is ON 3G network. This is not possible and I think that is wrong. Sprint has the phone reporting that it is 3G even though its on a 1x network.
If his has been discussed please let me know thanks.

amoamare said:
Ok so I have been messing around with the evo and doing a new rom for the whole cricket thing.
One thing i have noticed while doing this is that the EVO DOES NOT drop down to 1x at all. So i decided to write a 1x PRL to the phone. The phone reports that it is ON 3G network. This is not possible and I think that is wrong. Sprint has the phone reporting that it is 3G even though its on a 1x network.
If his has been discussed please let me know thanks.
Click to expand...
Click to collapse
Sorry to deviate from your original message but is there a way to force 1x? I'm assuming 1x uses less energy than EVDO/3G; so if true, it would be beneficial to switch to 1x when idling/display is off. Maybe tasker or juice defender already does this?
Edit: On CM6 I hit 1x from time to time. At least the status bar reports it as 1x. Could be a Sense/HTC bug.
Edit 2: It seems that Android doesn't have a API for 3G/2G toggling. Sucks.

No your fine, Yes CM does go to 1x. This isnt based off a sprint rom. Its not a HTC Sense issue because I had ported a incredible rom a while back to the phone and it would drop to 1x. I just tried a new port for 2.2 from the incredible and its doing the same thing.
It is possbile that it could be a HTC Sense Bug in the 2.2 Froyo. But i really think that Verizon and Sprint are not wanting it to drop to 1x. Wich i think is wrong.
The way i forced it was to load a 1x PRL on the phone.
I'm connected as 3G "False" as i checked the speed now and I only got 39.62kb wich is far from the 1565.1kbs i checked before switching PRL.

Maybe you already knew this, but I'm pretty sure that for a 1xRTT network the 3G icon in stock htc sense roms simply greys out. At least that's what I remember seeing in the manual. When the phone is connected to 3G the icon turns white.

I don't know - I'm almost positive that I've seen a 1x symbol in my status bar instead of 3g a few times. It's been a while though...

Well from what i see thats not true.
Im on 1xRTT right now. The icon is a solid white.

Even if that was the case and it should grey out. That is completely deceiving. It should accurtly show it is on the 1x network.

amoamare said:
Well from what i see thats not true.
Im on 1xRTT right now. The icon is a solid white.
Click to expand...
Click to collapse
sorry - who was this to? Also, I know there's a 1x symbol in the framework - it's got to be there for a reason, right?

OK I just checked the manual and it has a 1X icon. You're right.
Edit: The com.htc.resources.apk where sense signal icons are located contains the images for 1X so maybe it's something in the xml's that prevents the phone from either correctly notifying a 1X signal or bypassing the connection all together. HTC obviously intended for the phone to connect to 1X if they took the time to sensify the images. Strange.

Yes HTC intended for it but thats not the case. Has anyone on sprint successfully dropped to a 1x Connection ? Here is what I notice if im not forcing a 1x connection.
If it looses a 3G connection, it does not successfully drop to 1x. It just looses 3G all together then tries multiple times to go to 3G if it doesn't succeed you loose internet.
If you have a 1x prl it loads 1x but shows its a 3G connection wich is not true at all. This is disappointing.

amoamare said:
Yes HTC intended for it but thats not the case. Has anyone on sprint successfully dropped to a 1x Connection ?
Click to expand...
Click to collapse
ummm...yeah - like I said in my prev post, I've seen the 1x icon appear on my phone in parts of nj where I wasn't picking up 3g.

What ROM are you using ?

OK Im going to grab my friends Evo tonight that is on a sprint a force a 1x connection and see if his shows accurately or not.

I assume your custom PRL is forcing a 1X connection on sprint towers and not verizon or something? The phone may only show a drop to 1X if on sprint's network. If you are on verizon or cricket or something it probably wont indicate 1X.

amoamare said:
What ROM are you using ?
Click to expand...
Click to collapse
I was either using stock, or an older version of baked snack.

Its not a custom PRL the one im using is a cricket prl. Made only for 1x network. It does not support EVDO.
Sprint has a few 1x PRL's only and I will load his phone with it and test it.
That doesn't make sense. The phone being on cricket or any other service would not make the phone report its on 3G all time. I flash a lot of phones to cricket. Like i said before this is a Sprint Rom issue. I loaded it with a incredible ROM and it successfully drops to 1x connection.

fachadick,
You might have been using baked snack rom.
Im checking tonight with the service on sprint.

So far its confirmed.
Two people with HTC EVO's on sprint.
One (Me) on with evo on cricket.
We forced all three EVOs to work on 1x connection only. All three of them are showing 3G icon but are only getting 1x speeds. This is very deceiving.

amoamare said:
Its not a custom PRL the one im using is a cricket prl. Made only for 1x network. It does not support EVDO.
Sprint has a few 1x PRL's only and I will load his phone with it and test it.
That doesn't make sense. The phone being on cricket or any other service would not make the phone report its on 3G all time. I flash a lot of phones to cricket. Like i said before this is a Sprint Rom issue. I loaded it with a incredible ROM and it successfully drops to 1x connection.
Click to expand...
Click to collapse
The reason I say it might not work on a PRL from another carrier is because when I am roaming I get a triangle above my reception, but the data icon remains 3G if I remember correctly. The actual data connection is only 1X because of roaming agreements, so what I am theorizing here is that the phone only changes to 1X when you are on an authentic sprint network and the connection drops to 1X. This is probably built into the rom, which is why it works for other phones, but not the EVO.
Because you are using a "roaming" PRL, I would think that the phone doesn't trigger the change to 1X icon just like actual roaming with a Sprint PRL. That's my hunch.

Yes i understand what you are saying, and yes that is plausible.
But doesn't explain why when we force the sprint ones they do not change to 1x ? I can force any other phone to 1x on the sprint network.

Do anyone have the latest(or close) Verison PRL 52078????

I googled and can't find a download for verizon 2010 PRLs. Anyone have a link or can rip it from their phone??

noob_2010 said:
I googled and can't find a download for verizon 2010 PRLs. Anyone have a link or can rip it from their phone??
Click to expand...
Click to collapse
This is the Sprint Evo forum. Maybe try a Verizon forum?

I was thinking someone here already had it ripped out of a verizon phone for their use on the Evo too

HERE are a few Verizon PRL's I keep around. There is a 51926 in there, I think from June or July of this year. Also some 65 series PRL's, but I haven't used any of them. I can verify that at least in Vancouver, WA I get great voice and 3G signal with the 51 series PRL's, cant really tell the difference between them, 518, 516, 517, 519, all good for me. Roaming triangle taunts me the whole time though,
Also, link in my sig for some other PRL's for the VZW 3G hack.

JTNiggle said:
HERE are a few Verizon PRL's I keep around. There is a 51926 in there, I think from June or July of this year. Also some 65 series PRL's, but I haven't used any of them. I can verify that at least in Vancouver, WA I get great voice and 3G signal with the 51 series PRL's, cant really tell the difference between them, 518, 516, 517, 519, all good for me. Roaming triangle taunts me the whole time though,
Also, link in my sig for some other PRL's for the VZW 3G hack.
Click to expand...
Click to collapse
Thanks but i've tried 25 roams through out the month with altel/verizon and I always get 1x with 1 BAR. the only difference is some PRLs show the roam sign and others don't. This one even gave me the Roaming symbol.....What could the problem be????

I really don't know what the issue could be. I know that all the PRL's I linked will roam on 3G, so ???

JTNiggle said:
I really don't know what the issue could be. I know that all the PRL's I linked will roam on 3G, so ???
Click to expand...
Click to collapse
Well they jump back and forth from Evd and Evdo_A when I sit the phone with 1 bar. But if I try to use the phone it jumps back down to 1xrrt with 1 or 2 bars at times. I'm kind of new to the hacking scene but I think everyone thing is good on my end. Unless there are other things you suppose to do after changing your PRL?

I'm no hacker myself, so at this point I don't know what else to look at.
Whenever I run any of these PRL's, I always have my network set to Sprint only, I turn off data roaming and make sure always on mobile data is enabled. But, even at the worst, I get intermittent data loss, but never get anything other then 3g. Have you tried the 00001 and 01337 prl's from the roam hack thread?
For me, on CM6.1, if I run any of the verizon PRL's, and select Sprint Only in the wireless networks menu, I roam on VZW 3G. If I switch to Affiliated Networks setting, I will drop all signal cause it gets confused I guess. If I change back to a Sprint PRL, and Affiliated Networks, I get good voice signal, but show 1x for data. As soon as I put it back to Sprint only, my data returns to 3g.
On any new froyo sense rom, it's almost impossible to tell. A bug that seems like it may be intentional has popped up. My phone will not show 1x, but only 3g. Even when I'm on a sprint prl, and confirmed to be roaming, which would be 1x, It still shows 3g. I dug into the rom, and the icons are there, they just don't show up on a lot of sense rom's
How are you able to tell what evdo ur on? Are you on an Evo?

JTNiggle said:
I'm no hacker myself, so at this point I don't know what else to look at.
Whenever I run any of these PRL's, I always have my network set to Sprint only, I turn off data roaming and make sure always on mobile data is enabled. But, even at the worst, I get intermittent data loss, but never get anything other then 3g. Have you tried the 00001 and 01337 prl's from the roam hack thread?
For me, on CM6.1, if I run any of the verizon PRL's, and select Sprint Only in the wireless networks menu, I roam on VZW 3G. If I switch to Affiliated Networks setting, I will drop all signal cause it gets confused I guess. If I change back to a Sprint PRL, and Affiliated Networks, I get good voice signal, but show 1x for data. As soon as I put it back to Sprint only, my data returns to 3g.
On any new froyo sense rom, it's almost impossible to tell. A bug that seems like it may be intentional has popped up. My phone will not show 1x, but only 3g. Even when I'm on a sprint prl, and confirmed to be roaming, which would be 1x, It still shows 3g. I dug into the rom, and the icons are there, they just don't show up on a lot of sense rom's
How are you able to tell what evdo ur on? Are you on an Evo?
Click to expand...
Click to collapse
Theres a app called Cellumap and Phonestatus in the marketplace. It tells you the network your phone is on and cellular provider.
I'm using the sprint lovers CUSTOM rom. I guess I'll switch to cm6 custom rom like you are using and set it up like you mentioned. so I'll give this a try tommorow(sunday) and report back. but I think it's just the RURAL area I live in but then again Verizon has full coverage according to their map...

yeah, probably just ur area. You should call Verizon and tell them about the issue
You could say something like, "hey, I'm trying to use your expanded 3g service for free, but all I get is 1x. Can you give me an ETA as to when this will be fixed?" That would be fun!
I'll give those apps a try on my end and see what I get.

Well, I'm getting EVDO rev a on most of these. Provider shows digital roaming but still says Sprint. Confirmed speed tests at just under 1mbs and dialing a number without area code sends me to Verizon error message.
That is with the 51 and 41 PRL's.
Hey... This thing makes phone calls too!

JTNiggle said:
Well, I'm getting EVDO rev a on most of these. Provider shows digital roaming but still says Sprint. Confirmed speed tests at just under 1mbs and dialing a number without area code sends me to Verizon error message.
That is with the 51 and 41 PRL's.
Hey... This thing makes phone calls too!
Click to expand...
Click to collapse
Aw great for you ... well I'm installing this cyanogenmod6.1 custom rom and see what it does on a different rom I guess. If not I don't know what else I could, probably no roaming agreement with Verizon(altell had my area covered before Verizon bought them so Verizon really never had towers here....)

Ah, so that's why you were looking for the newest PRL. I would think you could get it to work with the right PRL.
Hey... This thing makes phone calls too!

Poor internet on Telstra Australia

I have had my SGSII for about 6 weeks now. Running it on the Telstra Next G network.
The problem is I am having a shocking internet experience.
My experience is based after coming from the HD2 running Android.
I have had the network freeze a few times. This is identified by the traffic arrows stay stuck. Airplane mode and back resets.
Basically cloud based apps like Market, Maps etc takes ages (60s-5mins) to start up. Kill and re-launch is quick).
Lots of network errors in Google Market.
Lots of Server unreachable errors in Emails (Pointing to exchange 2007)
I have updated the APN details to use Telstra.internet.
Great reception at home and work.
Calls and SMS's are fine.
Ideas? Waiting to see the Cyanogen rom. Wondering if my experience is due to Kies or another program getting involved with internet.
Any ideas please. My HD2 ran with the same Sim and worked like a rocket. No such issues.

Have you tried turning fast dormancy off? I'm on the Optus network, but I found with fast dormancy on I was getting unreliable internet (market would timeout a lot, doing installs/updates would fail straight away, etc). When I turned it off, I got better speeds and the connections were reliable.
Turn fast dormancy off:
1. In dialer - *#9900#
2. Select Disable fast dormancy

no such issues for me, using a vodafone branded handset. The only thing is that it will occassionally use 3telstra instead of telstra, in which case i need to manually select the network. a bit of a pain but not 2 bad

flagger said:
Have you tried turning fast dormancy off? I'm on the Optus network, but I found with fast dormancy on I was getting unreliable internet (market would timeout a lot, doing installs/updates would fail straight away, etc). When I turned it off, I got better speeds and the connections were reliable.
Turn fast dormancy off:
1. In dialer - *#9900#
2. Select Disable fast dormancy
Click to expand...
Click to collapse
Thanks, will try. what does fast dormancy do?

Found this as well
http://forums.whirlpool.net.au/archive/1713536
Looks like it speeds up connection ramp up and down.

Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!

dusty_nz said:
Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!
Click to expand...
Click to collapse
THIS IS A GREAT POST (even if it is a repost from whirlpool)!
So many people appear to be having this issue (including myself on O2 UK) where the data connection is stalling.
That code (*#301279#) is a gem.
Whilst I am certainly not happy that Samsung have released this phone with such a massive issue (telling you to wait until KE9 for a fix is really quite terrible!), I would rather have this fix in the meantime whilst waiting for the new firmware.
I have just disabled H/H+ by selecting 'Release 99 HSPA off' and my stalling issues have disappeared. Furthermore, my down speed is still 1.5 Mbps and upload speed is also 1.5 Mbps. I am more than happy with that speed. As the quoted post states, if you want more than this speed, this solution will not be good for you.
Thanks for posting this dusty_nw, this has been bugging me for weeks.

dusty_nz said:
Thanks, will try. what does fast dormancy do?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14457802&postcount=8
If you have it enabled it will fall from H to 3G in 7 seconds when connection is idle, otherwise in 30 seconds. 7 seconds are to short it will lose time and battery renegotiating to H to often. Ex: when you read your rss feed it will renegtiate higher speed for every article you read, very annoying.
Click to expand...
Click to collapse

this should be stickied, fixed my issues i had on optus the connection would continually change from H, and 3g and stall i just disabled all except 3g and now its perfect and very quick great post!

One thing i did on mine with Telstra is change the APN from Telstra.wap to Telstra.internet made the internet feel better. Also got much better upload and download speeds.
Sent from my GT-I9100 using XDA Premium App

May be a sillt question but.
I used the stock dialer and put *#301279# in
Menu popped up.
Used my finger to press "[2] Change HSPA Revision"
Pressed "[2] Release 5"
Goes to menu with two options of which none seem to do anything when pushed.
Went back to strat of menu and selected "[1] Release R99"
Same options and none can be clicked.
So am I not doing this right? Have the changes been made with no signs or message? If they have changed how do I get them back?
I expected the option to change to visually say its "off" or something.

Although no message came up it appears my phone is staying in 3g so maybe it worked... Although I am in low reception visiting the country side so maybe they don't have H or H+ anyway....
If I selected the first option does this restrict data to 3G?
Select 2nd option for H?
or Select 3rd option for H+ or unrestricted?
Is this how its works?
Edit: I have now found it works like I thought. The screen after I click either of the options then shows what is active and is the confirmation in a way. I jumped on the forum a little too quick......

Hi. I've book marked this because I get this issue thanks.
However it is worth noting that difference between 6 and 5 is only hsupa which is upload. So you wouldn't expect change in download speeds changing that going back to 3g of course affects both directions.

tjjensen23 said:
One thing i did on mine with Telstra is change the APN from Telstra.wap to Telstra.internet made the internet feel better. Also got much better upload and download speeds.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
WOW!!!! I just switched over.. mine use to max out at about 8Mbps, but my last test before the swap was 6.7Mbps... switched over and i tested 10Mbps and then 11mpbs!!

gunigugu said:
WOW!!!! I just switched over.. mine use to max out at about 8Mbps, but my last test before the swap was 6.7Mbps... switched over and i tested 10Mbps and then 11mpbs!!
Click to expand...
Click to collapse
Telstra.iph works best for me in Perth.

I use a SGS2 (bought in Europe through Expansys) on Telstra since 2 months now, without any issue. I used several firmwares and kernels since then (not to test, just to update: KE7, KG2, KG3), all behaved the same way.
I tried two different APN (telstra.iph and telstra.wap), both gave me the same kind of speeds (quite good, except some times in the middle of the day).
I never found the datas to create the telstra.internet APN (they do not seem to be on ausdroid). Could someone point me to them?

As an aside, I've just finished testing the I9000TDUKF4 modem (yes it works!), if Telstra did actually have tweaks made as they claim, there was no discernible difference on Telstra's NextG using their 'T' version KF4 modem and a stock KG3.
Any changes if any must be on the hardware level or via software set tweaks, the modem really didn't make any difference at all to my download speeds.
For those wanting to replicate the experiment or muck around I've uploaded the Telstra 'T' variant KF4 modem here: http://www.multiupload.com/VKPFYPURD5

asgard said:
As an aside, I've just finished testing the I9000TDUKF4 modem (yes it works!), if Telstra did actually have tweaks made as they claim, there was no discernible difference on Telstra's NextG using their 'T' version KF4 modem and a stock KG3.
Any changes if any must be on the hardware level or via software set tweaks, the modem really didn't make any difference at all to my download speeds.
For those wanting to replicate the experiment or muck around I've uploaded the Telstra 'T' variant KF4 modem here: http://www.multiupload.com/VKPFYPURD5
Click to expand...
Click to collapse
Thanks for this, I just stumbled upon this thread, messed about with a few settings and getting much better use out of NEXT G
Cheers

Roaming and EG22

Anyone having any luck with Roam Control on EG22? I'm running the EG22 w/ EG22 modem. Everything looks to be working fine except for one huge glaring problem...roaming. I have all the roam guard nonsense turned off. I hit Roaming Only, I get the little triangle and even see it in the debug connected to VZW but I never get any data connection. I've tried rebooting, etc.
I would love to hang out on EG22 but without roaming this thing is worthless to me. At work I have to force roam since Sprint data has been dead downtown for over a year.

Works fine for me
remember, data won't show if you're connected to 4g or wifi.

LunaticWolf said:
Works fine for me
remember, data won't show if you're connected to 4g or wifi.
Click to expand...
Click to collapse
Hmm... no 4G or WiFi here. It just shows the triangle with the signal meter, but of course there is no data connection.
I flashed the DEODEXED version by decadance. What version are you using? are you using the EG22 modem? I haven't tried to flash an older modem yet.

Make sure you have data enabled. hold the power button and then click data network mode.

Tried with rc 1.4 and it worked, the 3g data symbol doesn't show up till you request for internet. Both time I tried took 1 min to handshake.
I am using prl 11114 and my suppose to be 3g data roam speed is at cdma speed dl is caped around 120kbps on verizon full signal bar.
Sent from my SPH-D700 using XDA App

the newest RC works for me, but the modem crashes and reboots every time I go into roaming, but it reboots into roaming fine so I haven't really worried too much

I checked all that. It just doesn't handshake for some reason. I remember this same issue on the very first Froyo leak. Weird thing is I tried the roaming on the very first GB leak and it worked just fine.
I'll have to flash around some modems, try a different release of EG22 and see if I can get this working. This feature is a huge must for me.

Got it working... ODIN'd to this version of GB and it worked first shot. WOOHOO!! Loving it.
http://forum.xda-developers.com/showthread.php?t=1184134

[Q] How can I get 4G back?

I updated the PRL on my Note 3 using the dialer code. Ever since my phone won't connect to 4G LTE. I'm running Eclipse, not sure if that matters. Is there a way to get 4G back?

hehe i knew this would come in handy. Had the same happened to me. service menu 27663368378 > UE SETTING & INFO > SETTING > PROTOCOL > CDMA > EFS PROFILE > eHRPD PROFILE > SET TO VZW DEFAULT. Then restart. Problem should be fixed.

6d00z said:
hehe i knew this would come in handy. Had the same happened to me. service menu 27663368378 > UE SETTING & INFO > SETTING > PROTOCOL > CDMA > EFS PROFILE > eHRPD PROFILE > SET TO VZW DEFAULT. Then restart. Problem should be fixed.
Click to expand...
Click to collapse
Thanks for the suggestion, but the service menu doesn't work with the Eclipse ROM. The longer version of my problem is that I went on Vacation, and was getting poor reception. The coverage map seemed to indicate I should be getting better reception, so I tried to update my PRL. That is when I lost 4G completely. Upon arriving back home, I updated my PRL again while in an area I knew I usually got full bars of LTE. Now I get LTE, but it drops back to 3G after a few minutes if I'm not actively downloading anything. To get LTE back, I have to cycle airplane mode.
I may try to flash a rom that the service menu works with and try what you suggested when I find the time.

have you tried [APP][1.6+] CSC Changer + Refurbishment Check + Phone INFO
MongarEric said:
Thanks for the suggestion, but the service menu doesn't work with the Eclipse ROM. The longer version of my problem is that I went on Vacation, and was getting poor reception. The coverage map seemed to indicate I should be getting better reception, so I tried to update my PRL. That is when I lost 4G completely. Upon arriving back home, I updated my PRL again while in an area I knew I usually got full bars of LTE. Now I get LTE, but it drops back to 3G after a few minutes if I'm not actively downloading anything. To get LTE back, I have to cycle airplane mode.
I may try to flash a rom that the service menu works with and try what you suggested when I find the time.
Click to expand...
Click to collapse
heres link. free from playstore should work around the google dialer. http://forum.xda-developers.com/showthread.php?t=2609045
also the "activity launcher" app from the play store may help as well

Hehe i use that app to get inside the service menu. Since dialing the code doesnt work on the stock verizon rom. Served me well.

LordOfTrance said:
heres link. free from playstore should work around the google dialer. http://forum.xda-developers.com/showthread.php?t=2609045
also the "activity launcher" app from the play store may help as well
Click to expand...
Click to collapse
Nice!

I tried going back to the MJE modem, problem seemed to get worse. Went back to the NC4 modem and updated PRL, and LTE seems to be sticking now.

What procedure did you use to update the prl. Honestly prl update on their own so I dont know why you decided to do this

drewcam888 said:
What procedure did you use to update the prl. Honestly prl update on their own so I dont know why you decided to do this
Click to expand...
Click to collapse
I was on vacation in LA and was getting terrible signal wherever I went (coverage maps indicated I should have had a good signal most places). I figured it would be a quick thing to try. I dialed *228 to do it. I thought it was a long shot that it would fix anything, but I figured it couldn't hurt.

MongarEric said:
I was on vacation in LA and was getting terrible signal wherever I went (coverage maps indicated I should have had a good signal most places). I figured it would be a quick thing to try. I dialed *228 to do it. I thought it was a long shot that it would fix anything, but I figured it couldn't hurt.
Click to expand...
Click to collapse
*228 Should never be uaed on a 4G phone it could easily mess up your phone like it seemed to do. PRL are automatically pushed to 4G devices. I don't undwrstand how but you can supposedly ruin your sim card by doing it.

Interesting. I'll try swapping sim cards with my tablet. I'm traveling again, and LTE isn't working now that I'm in Atlanta. It was working this morning in DC. That service menu setting didn't seem to help.

I swapped sim cards with my tablet, and both devices had LTE. Did a speed test, and they both got above 15 Mbps. When I swapped the cards back, my phone once again failed to connect to LTE. I don't have any idea what information sim cards hold, but it seems weird that my phone sim card works fine in my tablet but not in the phone. I guess I'll be getting a new sim card.

MongarEric said:
I swapped sim cards with my tablet, and both devices had LTE. Did a speed test, and they both got above 15 Mbps. When I swapped the cards back, my phone once again failed to connect to LTE. I don't have any idea what information sim cards hold, but it seems weird that my phone sim card works fine in my tablet but not in the phone. I guess I'll be getting a new sim card.
Click to expand...
Click to collapse
Don't do *228 anymore also that way you save your sim card.

I'm still confused why the "bad" sim card works fine in my tablet.