Ok so I have been messing around with the evo and doing a new rom for the whole cricket thing.
One thing i have noticed while doing this is that the EVO DOES NOT drop down to 1x at all. So i decided to write a 1x PRL to the phone. The phone reports that it is ON 3G network. This is not possible and I think that is wrong. Sprint has the phone reporting that it is 3G even though its on a 1x network.
If his has been discussed please let me know thanks.
amoamare said:
Ok so I have been messing around with the evo and doing a new rom for the whole cricket thing.
One thing i have noticed while doing this is that the EVO DOES NOT drop down to 1x at all. So i decided to write a 1x PRL to the phone. The phone reports that it is ON 3G network. This is not possible and I think that is wrong. Sprint has the phone reporting that it is 3G even though its on a 1x network.
If his has been discussed please let me know thanks.
Click to expand...
Click to collapse
Sorry to deviate from your original message but is there a way to force 1x? I'm assuming 1x uses less energy than EVDO/3G; so if true, it would be beneficial to switch to 1x when idling/display is off. Maybe tasker or juice defender already does this?
Edit: On CM6 I hit 1x from time to time. At least the status bar reports it as 1x. Could be a Sense/HTC bug.
Edit 2: It seems that Android doesn't have a API for 3G/2G toggling. Sucks.
No your fine, Yes CM does go to 1x. This isnt based off a sprint rom. Its not a HTC Sense issue because I had ported a incredible rom a while back to the phone and it would drop to 1x. I just tried a new port for 2.2 from the incredible and its doing the same thing.
It is possbile that it could be a HTC Sense Bug in the 2.2 Froyo. But i really think that Verizon and Sprint are not wanting it to drop to 1x. Wich i think is wrong.
The way i forced it was to load a 1x PRL on the phone.
I'm connected as 3G "False" as i checked the speed now and I only got 39.62kb wich is far from the 1565.1kbs i checked before switching PRL.
Maybe you already knew this, but I'm pretty sure that for a 1xRTT network the 3G icon in stock htc sense roms simply greys out. At least that's what I remember seeing in the manual. When the phone is connected to 3G the icon turns white.
I don't know - I'm almost positive that I've seen a 1x symbol in my status bar instead of 3g a few times. It's been a while though...
Well from what i see thats not true.
Im on 1xRTT right now. The icon is a solid white.
Even if that was the case and it should grey out. That is completely deceiving. It should accurtly show it is on the 1x network.
amoamare said:
Well from what i see thats not true.
Im on 1xRTT right now. The icon is a solid white.
Click to expand...
Click to collapse
sorry - who was this to? Also, I know there's a 1x symbol in the framework - it's got to be there for a reason, right?
OK I just checked the manual and it has a 1X icon. You're right.
Edit: The com.htc.resources.apk where sense signal icons are located contains the images for 1X so maybe it's something in the xml's that prevents the phone from either correctly notifying a 1X signal or bypassing the connection all together. HTC obviously intended for the phone to connect to 1X if they took the time to sensify the images. Strange.
Yes HTC intended for it but thats not the case. Has anyone on sprint successfully dropped to a 1x Connection ? Here is what I notice if im not forcing a 1x connection.
If it looses a 3G connection, it does not successfully drop to 1x. It just looses 3G all together then tries multiple times to go to 3G if it doesn't succeed you loose internet.
If you have a 1x prl it loads 1x but shows its a 3G connection wich is not true at all. This is disappointing.
amoamare said:
Yes HTC intended for it but thats not the case. Has anyone on sprint successfully dropped to a 1x Connection ?
Click to expand...
Click to collapse
ummm...yeah - like I said in my prev post, I've seen the 1x icon appear on my phone in parts of nj where I wasn't picking up 3g.
What ROM are you using ?
OK Im going to grab my friends Evo tonight that is on a sprint a force a 1x connection and see if his shows accurately or not.
I assume your custom PRL is forcing a 1X connection on sprint towers and not verizon or something? The phone may only show a drop to 1X if on sprint's network. If you are on verizon or cricket or something it probably wont indicate 1X.
amoamare said:
What ROM are you using ?
Click to expand...
Click to collapse
I was either using stock, or an older version of baked snack.
Its not a custom PRL the one im using is a cricket prl. Made only for 1x network. It does not support EVDO.
Sprint has a few 1x PRL's only and I will load his phone with it and test it.
That doesn't make sense. The phone being on cricket or any other service would not make the phone report its on 3G all time. I flash a lot of phones to cricket. Like i said before this is a Sprint Rom issue. I loaded it with a incredible ROM and it successfully drops to 1x connection.
fachadick,
You might have been using baked snack rom.
Im checking tonight with the service on sprint.
So far its confirmed.
Two people with HTC EVO's on sprint.
One (Me) on with evo on cricket.
We forced all three EVOs to work on 1x connection only. All three of them are showing 3G icon but are only getting 1x speeds. This is very deceiving.
amoamare said:
Its not a custom PRL the one im using is a cricket prl. Made only for 1x network. It does not support EVDO.
Sprint has a few 1x PRL's only and I will load his phone with it and test it.
That doesn't make sense. The phone being on cricket or any other service would not make the phone report its on 3G all time. I flash a lot of phones to cricket. Like i said before this is a Sprint Rom issue. I loaded it with a incredible ROM and it successfully drops to 1x connection.
Click to expand...
Click to collapse
The reason I say it might not work on a PRL from another carrier is because when I am roaming I get a triangle above my reception, but the data icon remains 3G if I remember correctly. The actual data connection is only 1X because of roaming agreements, so what I am theorizing here is that the phone only changes to 1X when you are on an authentic sprint network and the connection drops to 1X. This is probably built into the rom, which is why it works for other phones, but not the EVO.
Because you are using a "roaming" PRL, I would think that the phone doesn't trigger the change to 1X icon just like actual roaming with a Sprint PRL. That's my hunch.
Yes i understand what you are saying, and yes that is plausible.
But doesn't explain why when we force the sprint ones they do not change to 1x ? I can force any other phone to 1x on the sprint network.
Related
I searched all the threads and found nothing on this as far as I can see. I have been having this since day one with my G1. Every time I receive a call on my G1 or during the call it drops from 3G to GSM. I had stock T-Mo roms on my G1 (Pre/Post Cupcake) then JF 1.51 and now cyanogen 4.0.2 and this problem persists. I called T-Mo a few times on this and they exchanged my G1 3 times and gave me a new battery and charger free of charge. Does anyone else have this issue or know of a work around? This happens when I am at home and work. I travel for work to different locations and it still happens. When my phone rings it automatically drops 3G and goes to GSM (no icon next to the radio icon in the status bar). While making calls it stays on 3G for about a few seconds before it craps out and drops to GSM. It totally skips EDGE and GPRS. T-Mo said they sent out radio antenna tech's to the antennas near my home and they said all is fine and dandy. I live In Queens NY and work in the Bronx. When I travel to Brooklyn its the same as well as driving though Manhattan. I hope someone can help me with this.
PeterC18st said:
I searched all the threads and found nothing on this as far as I can see. I have been having this since day one with my G1. Every time I receive a call on my G1 or during the call it drops from 3G to GSM. I had stock T-Mo roms on my G1 (Pre/Post Cupcake) then JF 1.51 and now cyanogen 4.0.2 and this problem persists. I called T-Mo a few times on this and they exchanged my G1 3 times and gave me a new battery and charger free of charge. Does anyone else have this issue or know of a work around? This happens when I am at home and work. I travel for work to different locations and it still happens. When my phone rings it automatically drops 3G and goes to GSM (no icon next to the radio icon in the status bar). While making calls it stays on 3G for about a few seconds before it craps out and drops to GSM. It totally skips EDGE and GPRS. T-Mo said they sent out radio antenna tech's to the antennas near my home and they said all is fine and dandy. I live In Queens NY and work in the Bronx. When I travel to Brooklyn its the same as well as driving though Manhattan. I hope someone can help me with this.
Click to expand...
Click to collapse
ive always had this as well .. just never considered it a bug lol ... but i could see why someone would wanna keep their 3g while on a call .. reminds me of how sidekicks would lose data connectivity due to a call
xidominicanoix said:
but i could see why someone would wanna keep their 3g while on a call .. reminds me of how sidekicks would lose data connectivity due to a call
Click to expand...
Click to collapse
Could you elaborate?
If you've had 3 G1's and a tech says there's nothing wrong with the network then it's clearly an issues with cupcake, be it a feature or a bug...
I don't really see why you would want to keep data conectivity while in a call, (unless you're downloading something in the background..?) so it sounds like a way to save battery..
AdrianK said:
Could you elaborate?
If you've had 3 G1's and a tech says there's nothing wrong with the network then it's clearly an issues with cupcake, be it a feature or a bug...
I don't really see why you would want to keep data conectivity while in a call, (unless you're downloading something in the background..?) so it sounds like a way to save battery..
Click to expand...
Click to collapse
Here's a perfect example where 3G would rule when working properly.
I'm talking to my wife on my BT headset while driving home from work. I have my G1 on my dash with google maps running with traffic patterns showing. While talking I am able to talk clearly on 3G and still see where traffic is building so I can avoid it. Being stuck in rush hour in NYC sux homeless man [email protected] Whenever I do this and my 3G connection drops my call quality drops and we both hear it while we're talking and then it cuts in and out and the call drops then I dont get updates. It's a feature I would really like to have. Even when Im working and talking and downloading a new update of an app. This happens when I am at a static location as well. I know driving from cell tower to cell tower can have bad effects but it does the same when I'm just at home or any of my work locations. When 3G works properly which is rare its amazing. Its helped me get un lost and find my way many of times.
Point being when T-Mo released the 3G statement they said all users with 3G phones will expierence higher call quality from the extra bandwidth. Why would they cap or or disable it when they are promoting it? I see the the point of saving battery life but it still shouldnt be happening. 3G is made for that feature to work voice + data being accessed together.
It might just be there 3g network, imo tmobile reception is horrible. Like at my house it is so f'ed up, I can sit in my chair and have 3 bars then walk 2 feet and lose service. It does this all through my house and at my work. They said it must be something in the buildings I am in, bull**** I say because ATT never does that nor did vzw when I used them.
same thing happens with me and 3g and calls..also about the house thing, hows this one for u ill be sitting in the same spot and have good 3g reception and all of a sudden it drops to edge. I know a way around this is to set phone to 3G only but then in areas where theres non im screwed
I don't get it. My wife who had the original iPhone and then 3g and now 3gs never had this issue. She would stay on Edge and 3g depending if she waned to save batery life. My old BB 8700g would always stay on Edge never drop to GSM in my apartment. My 3G doesnt even fall to Edge it goes right to GSM. This is really annoying.
every t-mobile phone I have does this
I'm pretty sure its normal
No one knows if this is a hardware, software, or network problem. Except maybe HTC/T-Mobile/Google.
If your phone stays connected to 3G, it's all good. If it drops down to EDGE, even if for half a second, it will NOT reconnect to 3G until you hang up.
c2tmdsn said:
every t-mobile phone I have does this
I'm pretty sure its normal
Click to expand...
Click to collapse
My coworkers Samsung t819 doesn't. That's regular cell phone not a smart phone.
Gary13579 said:
No one knows if this is a hardware, software, or network problem. Except maybe HTC/T-Mobile/Google.
If your phone stays connected to 3G, it's all good. If it drops down to EDGE, even if for half a second, it will NOT reconnect to 3G until you hang up.
Click to expand...
Click to collapse
If any of those 3 know they should fix it or at the very least advertise that the calls you make are dropped to the lower bandwidth of the GSM network.
T-Mo finally got 3G for the last year don't dumb it down guys. Fix this.
Yes it is true once your phone drops beneath 3G it will not go to 3G until you hang up the call.
try running 3g only or wdma only by creating phone info shortcut on anycut .. im going to try that out and see if it ever drops .. should be a temporary fix for you atleast with the whole maps thing and such but if you ever in an edge only are your screwed
turboyo said:
try running 3g only or wdma only by creating phone info shortcut on anycut .. im going to try that out and see if it ever drops .. should be a temporary fix for you atleast with the whole maps thing and such but if you ever in an edge only are your screwed
Click to expand...
Click to collapse
I changed it to wcdma only in phone info. Hopefully this works. Everywhere I travel to throughout NYC has 3G. Hopefully this works. Also I have noticed that when downloading anything from 3G be it the market or browser it would drop from 3G to Edge as well.
PeterC18st said:
I changed it to wcdma only in phone info. Hopefully this works. Everywhere I travel to throughout NYC has 3G. Hopefully this works. Also I have noticed that when downloading anything from 3G be it the market or browser it would drop from 3G to Edge as well.
Click to expand...
Click to collapse
*UPDATE*
While at home downloading apps from Android Market on 3G with wcdma only selected the radio dropped with no netowkr connection. Bust.
PeterC18st said:
I don't get it. My wife who had the original iPhone and then 3g and now 3gs never had this issue. She would stay on Edge and 3g depending if she waned to save batery life. My old BB 8700g would always stay on Edge never drop to GSM in my apartment. My 3G doesnt even fall to Edge it goes right to GSM. This is really annoying.
Click to expand...
Click to collapse
Did she use att or tmobile with the iphone? Because att has a much stronger 3g network then tmobile which could be why. I am pretty sure it is something to do with tmobiles network and not your phone, perhaps your area has to many users for it to stay on 3G. I have read about how the cell towers work and they have only so many bands for each user to access at any given time so if tmobile doesn't have enough towers or those things mounted on the towers it may be set up so you only get 3G for data usage and not calls since they don't technically require it to work.
crpercodani said:
Did she use att or tmobile with the iphone? Because att has a much stronger 3g network then tmobile which could be why. I am pretty sure it is something to do with tmobiles network and not your phone, perhaps your area has to many users for it to stay on 3G. I have read about how the cell towers work and they have only so many bands for each user to access at any given time so if tmobile doesn't have enough towers or those things mounted on the towers it may be set up so you only get 3G for data usage and not calls since they don't technically require it to work.
Click to expand...
Click to collapse
My wife is on ATT. Isn't lower frequency better at penetrating through walls and such? (T-Mo 1700 MHz and 2100 MHz compared to ATT 1800 MHz) They haven't booted their 850 MHz antennas yet so I hear.
If that is true then why not boot me down to Edge or gprs why all the way down to gsm? I been living in the same area for 26 years. I have been with T-Mo before they even had antennas in my area and walking outside was the only way to get a signal with my phone. Now I get full reception in and out of my apartment and 3G connectivity in my apartment with a signal strength of -93dBm through out my apartment on 3G and -79 dBm on Edge.
T-Mo stated that this should not be happening. Hence the 3 phones new battery and charger and techs to the antennas. I'm starting to think its a HTC Android problem and not a T-Mo problem. Hopefully a new radio update can fix it.
I didn't even know GSM was still used in that way, I thought GPRS would be the bare minimum. How can you tell the difference? I use to only get a G icon and I looked it up and for the g1 it said that meant GPRS, what does it show for GSM? Not like any of this matters though.
I really have no idea why all this is happening to your G1 but I hope it gets resolved, good luck.
edit: on the tmobile coverage map it says edge/gprs and 3g, no gsm. does that make any difference? I checked for NYC overall not any specific boroughs.
crpercodani said:
I didn't even know GSM was still used in that way, I thought GPRS would be the bare minimum. How can you tell the difference? I use to only get a G icon and I looked it up and for the g1 it said that meant GPRS, what does it show for GSM? Not like any of this matters though.
I really have no idea why all this is happening to your G1 but I hope it gets resolved, good luck.
edit: on the tmobile coverage map it says edge/gprs and 3g, no gsm. does that make any difference? I checked for NYC overall not any specific boroughs.
Click to expand...
Click to collapse
GSM is what Edge Gprs and 3G run off of. Think of it as a progression. GSM>GPRS>EDGE>3G.
The way I know it is on GSM is to the left of the Radio icon on the home screen there is another icon that shows the network your on. 3G=3G E=EDGE G=GPRS and no icon means GSM. GSM is still being used. Most SMS and MMS messages get sent to your from through GSM while you are on a call.
I did the fix and i am on stock updated all the way from one of the threads in the dev section and before 4G worked with the old radio but cut out all the time So i decided to do this fix and now the 4G connects for about a minute and it disconnects and i am in an area with excellent 4G coverage. So if anyone knows of a 4G connection problem in the Kansas City area please tell me or if it is just my phone tell me how i can fix this problem.
Edit: It appears that 3G cuts in to do data instead of 4G because as soon as it cuts out 3G uses data.
Edit 2: Now if I go in to Setting>Wireless & Networks>4G Settings It says fair - Poor connection, Assuming because i am inside, but i am not connected.
Edit 3: After disabling mobile data in the network settings it now holds the 4G connection well but now i have to wonder why 3G would over take 4G while it is on.
I been having 4g problems since the recent ota update. I hardly get 4g and it's considerably slower.. I'm running full stock with no root. What fix is available?
soxozor said:
I been having 4g problems since the recent ota update. I hardly get 4g and it's considerably slower.. I'm running full stock with no root. What fix is available?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=715915
I've had my evo for a little over three weeks now... I've traveled to alot of different areas and I've never seemed to drop below 3G even when I have zero bars....Is anyone else experiencing this???
Sent from my Evo 4G using XDA App
I live in iowa, sprint roams a fair amount of the time. I don't think the evo will display anything other than 3g when internet is available even though it is roaming on like a 1x network. I think sprint roams 1x on UScell, but I've gotten good 3g speeds roaming as well, which I assume is Verizon. Running a speedtest has confirmed max rates of ~200kbs even though I had full bars. I've never gotten less than 800 when not roaming. Is there a program out there that will specifically tell who's tower you are roaming on? Thanks!
I have never seen anything other than 3G, 4G, or nothing for the data connection. It's the way the phone was designed. If I have a data connection, it always says 3G (I rarely connect to 4G).
I've seen a screenshot with EvDo listed in the status bar, but I've never seen anything but 3G on my phone.
The screenshot with EvDo was a custom ROM, so it may have been something they changed. I'll see if I can find the screenshot again. (It was here on xda.)
yes, i've seen a triangle, 1x or evdo symbol and sometimes and x for no service at all lol. i tend to miss the coverage i had under at&t...
EVDO = 3G
1x = Not 3G
Triangle = Roaming
3G is almost always displayed on the stock rom even when its not in 3G
On custom roms you will see different combinations
I get the triangle when riding underground in Chicago's subway.
The Evo is screwed up in signal display. It always shows 3G even if you're on 1xRTT.
I'm working on a widget that'll show it.
I googled and can't find a download for verizon 2010 PRLs. Anyone have a link or can rip it from their phone??
noob_2010 said:
I googled and can't find a download for verizon 2010 PRLs. Anyone have a link or can rip it from their phone??
Click to expand...
Click to collapse
This is the Sprint Evo forum. Maybe try a Verizon forum?
I was thinking someone here already had it ripped out of a verizon phone for their use on the Evo too
HERE are a few Verizon PRL's I keep around. There is a 51926 in there, I think from June or July of this year. Also some 65 series PRL's, but I haven't used any of them. I can verify that at least in Vancouver, WA I get great voice and 3G signal with the 51 series PRL's, cant really tell the difference between them, 518, 516, 517, 519, all good for me. Roaming triangle taunts me the whole time though,
Also, link in my sig for some other PRL's for the VZW 3G hack.
JTNiggle said:
HERE are a few Verizon PRL's I keep around. There is a 51926 in there, I think from June or July of this year. Also some 65 series PRL's, but I haven't used any of them. I can verify that at least in Vancouver, WA I get great voice and 3G signal with the 51 series PRL's, cant really tell the difference between them, 518, 516, 517, 519, all good for me. Roaming triangle taunts me the whole time though,
Also, link in my sig for some other PRL's for the VZW 3G hack.
Click to expand...
Click to collapse
Thanks but i've tried 25 roams through out the month with altel/verizon and I always get 1x with 1 BAR. the only difference is some PRLs show the roam sign and others don't. This one even gave me the Roaming symbol.....What could the problem be????
I really don't know what the issue could be. I know that all the PRL's I linked will roam on 3G, so ???
JTNiggle said:
I really don't know what the issue could be. I know that all the PRL's I linked will roam on 3G, so ???
Click to expand...
Click to collapse
Well they jump back and forth from Evd and Evdo_A when I sit the phone with 1 bar. But if I try to use the phone it jumps back down to 1xrrt with 1 or 2 bars at times. I'm kind of new to the hacking scene but I think everyone thing is good on my end. Unless there are other things you suppose to do after changing your PRL?
I'm no hacker myself, so at this point I don't know what else to look at.
Whenever I run any of these PRL's, I always have my network set to Sprint only, I turn off data roaming and make sure always on mobile data is enabled. But, even at the worst, I get intermittent data loss, but never get anything other then 3g. Have you tried the 00001 and 01337 prl's from the roam hack thread?
For me, on CM6.1, if I run any of the verizon PRL's, and select Sprint Only in the wireless networks menu, I roam on VZW 3G. If I switch to Affiliated Networks setting, I will drop all signal cause it gets confused I guess. If I change back to a Sprint PRL, and Affiliated Networks, I get good voice signal, but show 1x for data. As soon as I put it back to Sprint only, my data returns to 3g.
On any new froyo sense rom, it's almost impossible to tell. A bug that seems like it may be intentional has popped up. My phone will not show 1x, but only 3g. Even when I'm on a sprint prl, and confirmed to be roaming, which would be 1x, It still shows 3g. I dug into the rom, and the icons are there, they just don't show up on a lot of sense rom's
How are you able to tell what evdo ur on? Are you on an Evo?
JTNiggle said:
I'm no hacker myself, so at this point I don't know what else to look at.
Whenever I run any of these PRL's, I always have my network set to Sprint only, I turn off data roaming and make sure always on mobile data is enabled. But, even at the worst, I get intermittent data loss, but never get anything other then 3g. Have you tried the 00001 and 01337 prl's from the roam hack thread?
For me, on CM6.1, if I run any of the verizon PRL's, and select Sprint Only in the wireless networks menu, I roam on VZW 3G. If I switch to Affiliated Networks setting, I will drop all signal cause it gets confused I guess. If I change back to a Sprint PRL, and Affiliated Networks, I get good voice signal, but show 1x for data. As soon as I put it back to Sprint only, my data returns to 3g.
On any new froyo sense rom, it's almost impossible to tell. A bug that seems like it may be intentional has popped up. My phone will not show 1x, but only 3g. Even when I'm on a sprint prl, and confirmed to be roaming, which would be 1x, It still shows 3g. I dug into the rom, and the icons are there, they just don't show up on a lot of sense rom's
How are you able to tell what evdo ur on? Are you on an Evo?
Click to expand...
Click to collapse
Theres a app called Cellumap and Phonestatus in the marketplace. It tells you the network your phone is on and cellular provider.
I'm using the sprint lovers CUSTOM rom. I guess I'll switch to cm6 custom rom like you are using and set it up like you mentioned. so I'll give this a try tommorow(sunday) and report back. but I think it's just the RURAL area I live in but then again Verizon has full coverage according to their map...
yeah, probably just ur area. You should call Verizon and tell them about the issue
You could say something like, "hey, I'm trying to use your expanded 3g service for free, but all I get is 1x. Can you give me an ETA as to when this will be fixed?" That would be fun!
I'll give those apps a try on my end and see what I get.
Well, I'm getting EVDO rev a on most of these. Provider shows digital roaming but still says Sprint. Confirmed speed tests at just under 1mbs and dialing a number without area code sends me to Verizon error message.
That is with the 51 and 41 PRL's.
Hey... This thing makes phone calls too!
JTNiggle said:
Well, I'm getting EVDO rev a on most of these. Provider shows digital roaming but still says Sprint. Confirmed speed tests at just under 1mbs and dialing a number without area code sends me to Verizon error message.
That is with the 51 and 41 PRL's.
Hey... This thing makes phone calls too!
Click to expand...
Click to collapse
Aw great for you ... well I'm installing this cyanogenmod6.1 custom rom and see what it does on a different rom I guess. If not I don't know what else I could, probably no roaming agreement with Verizon(altell had my area covered before Verizon bought them so Verizon really never had towers here....)
Ah, so that's why you were looking for the newest PRL. I would think you could get it to work with the right PRL.
Hey... This thing makes phone calls too!
Downgraded to calkulins v1.7 since i was having issues with 1.8 and now i am not getting evdo connectivity at all. My phone only connects to 1x. Ive tried restoring my settings when i do ##3282# edit data profile and evdo. Im not sure what else to do. Ive flashed 3 different roms and nothing helped. What else can i do?
Sent from my PC36100 using XDA App
Go to settings, wireless & networks, mobile networks, mode of operation, and chose evdo only. This fixed my problem, hopefully it will help you.
I have no option to select mode of operation. I am unrooted now and back on bone stock ROM and still have this issue so I am not sure what is wrong. I am currently chatting with sprint to reset anything on their end. However, it still only connects to 1XRTT
try flashing 1.8 back and change the operation mode to hybrid. double check with ##3282# to also make sure the evdo setting is on automatic.
Sent from my PC36100 using Tapatalk
i just fixed this problem myself. go back to calkulin's evio 1.8, and change setting to hybrid. to see if it works, type ##3282# into dialer and choose view mode. go to evdo settings, and make sure its set on automatic. if not, then:
retrieve your msl (free app in market msl reader) and type the same code in, but choose edit mode. type in your msl, and go to evdo settings, and change to auto.
Ahhhh! I don't have this option :/
gohantrunks28 said:
Go to settings, wireless & networks, mobile networks, mode of operation, and chose evdo only. This fixed my problem, hopefully it will help you.
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
flash back to calkulin's evio 1.8
Changing to EVDO only helps with 1X, but I found out that the setting to EVDO only will not allow incoming text or calls. I had to put it back to Automatic.
I've tried everything everyone has posted so far. Changing to EVDO only and automatic and all that stuff. I took it into the Sprint store today and they tried telling me it was on 3G since the icon was showing that. I told them the evo icon never changes to 1x even when connected to 1x. She still didn't believe me. So I downloaded a few apps that showed my phone only connected to 1x and she downloaded the same app and it showed hers connected to EVDO. She said she couldn't trust the app and then she compared my phone internet load times to hers and mine was actually faster so she still wasn't convinced. I explained that the 3G is on a higher frequency than 1x and being indoors she may have a poor signal compared to mine. Also I told her that everyone in our area is probably connected to EVDO, thus slowing it down, versus just me on 1x, so I had better speeds. She said that is very true, so she ordered me a new Evo that should be here in a few days.
Sportsplayer612 said:
I've tried everything everyone has posted so far. Changing to EVDO only and automatic and all that stuff. I took it into the Sprint store today and they tried telling me it was on 3G since the icon was showing that. I told them the evo icon never changes to 1x even when connected to 1x. She still didn't believe me. So I downloaded a few apps that showed my phone only connected to 1x and she downloaded the same app and it showed hers connected to EVDO. She said she couldn't trust the app and then she compared my phone internet load times to hers and mine was actually faster so she still wasn't convinced. I explained that the 3G is on a higher frequency than 1x and being indoors she may have a poor signal compared to mine. Also I told her that everyone in our area is probably connected to EVDO, thus slowing it down, versus just me on 1x, so I had better speeds. She said that is very true, so she ordered me a new Evo that should be here in a few days.
Click to expand...
Click to collapse
THIS WILL GET YOU 3G
but you will be constantly roaming
try it out and let me know if it works for you.
##775#
search for 00001.prl and change it.
commit changes and it will restart
give it about 10 mins to get connected right and do a speed test.
i was getting only 15-20 kbps using the latest sprint prl.
i changed to this modified prl and im getting 1700-2200 kbps
i think sprints prl's are messed up..
What test can o perform to prove that its versions network I am using after this hack? An iplookup says I'm still connected to sprint.
dtr145r said:
THIS WILL GET YOU 3G
but you will be constantly roaming
try it out and let me know if it works for you.
##775#
search for 00001.prl and change it.
commit changes and it will restart
give it about 10 mins to get connected right and do a speed test.
i was getting only 15-20 kbps using the latest sprint prl.
i changed to this modified prl and im getting 1700-2200 kbps
i think sprints prl's are messed up..
Click to expand...
Click to collapse
Sent from an EVOlution
Bump
Sent from an EVOlution
I'm having the exact same problems. Tried damn near everything at this point. No luck. If you find a solution, please post it.