Database Users

Help!! Phone is Frozen....

Ok. So I just got this phone. I had the iPhone before and Im pretty tech savy. I honestly have no idea about this phone. I rooted it and today I received the Tmobile GPS update. Of course silly me updated it. Now its hung on the opening Vibrant screen. I deleted all data thinking it might restore it completely. That didnt work. So now my phone wont work and I have no clue how to fix it. HELP PLZ!

First of all can you access download mode or recovery? Try pressing both volume buttons and power. And let me know what happens.
Sent from my SGH-T959 using XDA App

Yea i can access all that. It gives me the "reboot system now" and all the other choices.

So reflash stock thru odin

namansell said:
So reflash stock thru odin
Click to expand...
Click to collapse
Im trying to do that now.
Not sure how long it takes. Its on "File Analysis"
How long does it normally stay on that?

It appears your phone is Soft-Bricked. You may need to use ODIN to go back to stock
Stephie Baby said:
Yea i can access all that. It gives me the "reboot system now" and all the other choices.
Click to expand...
Click to collapse
Went over this myself. I am pretty sure this is the same scenario. I followed these instructions.
http://forum.xda-developers.com/showthread.php?t=799105

Verify your drivers
Stephie Baby said:
Im trying to do that now.
Not sure how long it takes. Its on "File Analysis"
How long does it normally stay on that?
Click to expand...
Click to collapse
Sorry, took too long replying, i see you already almost there. If it stays too long at the File Analysis phase then there is probably not communication between your PC and your Phone. Make sure your PC detects your phone and that ODIN shows a port number when your phone is connected. (Any port # will do it) Check your drivers. Also if running Windows 7 Vista, try running ODIN as administrator.

The link to get all the files I need isnt working. GRRR!! This is a pain! Lol.

Stephie Baby said:
Im trying to do that now.
Not sure how long it takes. Its on "File Analysis"
How long does it normally stay on that?
Click to expand...
Click to collapse
Not long usually.
It sounds like you are in recovery mode vice download mode my friend. Try this:
First make sure you have all the correct drivers for the phone loaded onto your system.
-Close and reopen Odin.
-Unplug the USB cable and remove the battery.
-Reinsert the battery into the phone.
-Hold down both vol down + vol up and plug in the usb cable (make sure it's plugged into your computer first).
This should get you to a yellow screen that has a andriod sweeping, with "Download Mode" displayed at the bottom.
When you look in Odin you should see a little yellow box with a com port number in the upper left. This means the computer and Odin have found the phone, and that it is now ready for flashing.
Select the stock JFD firware for the PDA option, and the correct 512.pit file for PIT.
Try flashing again. Hopefully you get a bit further this time!

YAY!! It worked!! Ok. Thanks for the help.
Oh should I install the Tmobile GPS fix and root it again? Or will it get stuck again?

Stephie Baby said:
YAY!! It worked!! Ok. Thanks for the help.
Oh should I install the Tmobile GPS fix and root it again? Or will it get stuck again?
Click to expand...
Click to collapse
It's better for all of us to wait for Froyo !

Stephie Baby said:
YAY!! It worked!! Ok. Thanks for the help.
Oh should I install the Tmobile GPS fix and root it again? Or will it get stuck again?
Click to expand...
Click to collapse
No! heh....download Kies Mini (there's a thread in here...like pg 1 or 2) install JI6 from there. It's the official release instead of OTA from T-Mobile.
~SB
edit: Here it is...

Tab is Fu***d

So i was flashing the firmware to use the phone on the tab and while doing it the install failed. the tab cut off and will not come back on at all. no download mode nothing...anything can help. wont connect to odin either. any suggestions

Not come back on at all ?
Contact your service center then
Oh one thing...
When something like this happened, people call it "Bricked" not "Fu***d".

GOF007 said:
Not come back on at all ?
Contact your service center then
Oh one thing...
When something like this happened, people call it "Bricked" not "Fu***d".
Click to expand...
Click to collapse
lol i am fully aware of that just expressing how i feel about the brick and saying that it will not do anything..no download mode nothing.

thenewak said:
So i was flashing the firmware to use the phone on the tab and while doing it the install failed. the tab cut off and will not come back on at all. no download mode nothing...anything can help. wont connect to odin either. any suggestions
Click to expand...
Click to collapse
Do you get any lights whatsoever when it's plugged in?
Also, have you tried leaving it on charge for a while in the mains? Generally, when ODIN fails, the phone/tab allows you to get back into download mode, so this is new to me.
Was it flashing the radio (modem.bin) at the time, out of interest?

nprussell said:
Do you get any lights whatsoever when it's plugged in?
Also, have you tried leaving it on charge for a while in the mains? Generally, when ODIN fails, the phone/tab allows you to get back into download mode, so this is new to me.
Was it flashing the radio (modem.bin) at the time, out of interest?
Click to expand...
Click to collapse
No modem only the .tar and .pit files. i had flashed my galaxy s plenty of times with no problems. i left it charging tonight while im at work to see if that will do anything but i get no lights or anything. ive seen that some ppl get the pc to device screen but i dont get that either. but just wanted to try some things before shipping it to samsung only bc im in iraq and shipping takes forever.

Do U get anything when plugging the tab via USB to your computer ? And I do not mean Odin, I am just saying if the computer sees the USB connection.
Also, have you tried to press the POWER button and tap the screen at the same time ?
P_

pakalrtb said:
Do U get anything when plugging the tab via USB to your computer ? And I do not mean Odin, I am just saying if the computer sees the USB connection.
Also, have you tried to press the POWER button and tap the screen at the same time ?
P_
Click to expand...
Click to collapse
Nope the computer doesn't recognize it either. i get nothing at all..no i haven't tried that ...what exactly will that do?

If I bricked my Tab, I too would describe it as F***ED! But even with my moderate modding experience, Im not ready to do the phone mod. Just seems to me like too much risk.
Good luck with your Tab!

How is this a development issue? This isn't your personal support forum.

miketaylor00 said:
How is this a development issue? This isn't your personal support forum.
Click to expand...
Click to collapse
well i figured this would be an appropriate place to ask this type of ? as other ppl do. due to the fact that i was installing firmware from this section of the forums i figured i would ask the developers that read and write here.
anyways...i called samsung and told them idk why it wont cut on and they said to call it a power issue. so im going to send it to them to see if they can tell what i did..hopefully not. but we will see.

thenewak said:
well i figured this would be an appropriate place to ask this type of ? as other ppl do. due to the fact that i was installing firmware from this section of the forums i figured i would ask the developers that read and write here.
anyways...i called samsung and told them idk why it wont cut on and they said to call it a power issue. so im going to send it to them to see if they can tell what i did..hopefully not. but we will see.
Click to expand...
Click to collapse
Try leaving it connected to your computer for up to 1 hour with Odin loaded and ready on the screen.
Someone it will take time before it allow your PC to talk to it when it a messed up state due to a bad flash!

rmanaudio said:
Try leaving it connected to your computer for up to 1 hour with Odin loaded and ready on the screen.
Someone it will take time before it allow your PC to talk to it when it a messed up state due to a bad flash!
Click to expand...
Click to collapse
even if it will not power on at all?

thenewak said:
So i was flashing the firmware to use the phone on the tab and while doing it the install failed. the tab cut off and will not come back on at all. no download mode nothing...anything can help. wont connect to odin either. any suggestions
Click to expand...
Click to collapse
What were the names of the tar and pit files you flashed?

rotohammer said:
What were the names of the tar and pit files you flashed?
Click to expand...
Click to collapse
i dont see the thread on here but it was on here about a week ago. the first one that got you 3g + phone. Im not on my laptop bc im at work but do you know what im takling about.
Edit: i think it was the old JME and 512.pit...

OK just as an update and for anyone who had the same prob...as in tab will not do anything...i called samsung used the 1 yr warranty and told them it was a power issue...that i went to work it was on came home it was off and wouldnt power up so they replaced it with another one.

[Q] Possibly Bricked? Need Help ASAP!!

Well, today I tried setting up ClockworksMod so I could easily backup and restore my phone as needed. (As previous work i had caused issues and it wouldnt reboot until i reinstalled the rom)
Well, clockworkmod recovery would not install through the app, so I installed the image through Odin, and that worked flawlessly. I was able to backup and restore.
After it booted back up I was unable to add a new google account or erase the old one. Factory resetting it would casue it to get stuck in the boot loop again, until i restored it or reflashed.
Eventually I tried flashing another image, with repartition turned on.
Well, without surprise Windows 7 semi crashed and killed Odin.
Now when my phone "turns on" all i see is black. Nothing happens. I cant do any of the 3 button combos to get into Recovery or Download mode
Can anybody help me? I need to get this working ASAP!
Thanks

Edit : I need to check my eyes. I thought you can get into download mode.

If you cannot get to download mode with the 3-button-combo then you'll need a jig.

Intratech said:
If you cannot get to download mode with the 3-button-combo then you'll need a jig.
Click to expand...
Click to collapse
Dosnt that only work if the image of the phone and computer show up on the screen?
Absolutly nothing shows up for me

Can I have your battery cover to keep as a spare.

bncplix said:
Dosnt that only work if the image of the phone and computer show up on the screen?
Absolutly nothing shows up for me
Click to expand...
Click to collapse
You need a jig.

Uhm, why did you check repartition?
Also yes, you will need a jig. That's pretty much the only thing that can get you into download mode in this situation.
Transmitted from a Galaxy far far away via XDA telepathy.

Intratech said:
You need a jig.
Click to expand...
Click to collapse
Okay, going to just order one off ebay.
Will this do? hxxp://cgi.ebay.com/Samsung-i9100-Galaxy-S-II-Download-mode-USB-Dongle-Jig-/250824932406?pt=AU_MobilePhoneAccessories&hash=item3a6654bc36
But actually, it says it has to show one of those two screens, when mine is all black?
geko95gek said:
Uhm, why did you check repartition?
Also yes, you will need a jig. That's pretty much the only thing that can get you into download mode in this situation.
Transmitted from a Galaxy far far away via XDA telepathy.
Click to expand...
Click to collapse
Because it said it was needed for that image i was flashing

bncplix said:
Okay, going to just order one off ebay.
Will this do? hxxp://cgi.ebay.com/Samsung-i9100-Galaxy-S-II-Download-mode-USB-Dongle-Jig-/250824932406?pt=AU_MobilePhoneAccessories&hash=item3a6654bc36
But actually, it says it has to show one of those two screens, when mine is all black?
Because it said it was needed for that image i was flashing
Click to expand...
Click to collapse
It can still work in some cases, lets hope it does in yours.
Did you get that advise about repartitioning from Samfirmware?

Intratech said:
It can still work in some cases, lets hope it does in yours.
Hopefully! I just ordered one
Did you get that advise about repartitioning from Samfirmware?
Click to expand...
Click to collapse
Yes I did, was that something I shouldn't have done?
It sat on repartitioning for about 15 minutes, then windoes said Odin stopped responding and it killed it :/

I've been telling everybody to stop using the .pit files and repartitioning the device for every flash as you're just increasing the possibilities of things going wrong but people don't seem to take notice. Sadly in your case something did go wrong. You only need to use the .pit files and repartition the device if you mess up your partition table.
Those guys at Samfirmware really need to stop telling people to repartition their device for every flash.

Intratech said:
I've been telling everybody to stop using the .pit files and repartitioning the device for every flash as you're just increasing the possibilities of things going wrong but people don't seem to take notice. Sadly in your case something did go wrong. You only need to use the .pit files and repartition the device if you mess up your partition table.
Click to expand...
Click to collapse
Well, lesson learned. Today was the first time I even tried installing another ROM
Thanks for the help
Once my Jig comes in, I'll let you all know how it goes!

check if the phone heatens up extremely as soon as you put the battery in. if yes, thats a really bad sign.
a jig will only help you if you see anything on the screen. if the phone/screen doesn't react to ANYTHING, that's a full brick (happened to me too, jig didn't help, nothing helped, phone was completely dead and i had to send it in. fortunately, they repaired it within warranty).

lazyb2k said:
check if the phone heatens up extremely as soon as you put the battery in. if yes, thats a really bad sign.
a jig will only help you if you see anything on the screen. if the phone/screen doesn't react to ANYTHING, that's a full brick (happened to me too, jig didn't help, nothing helped, phone was completely dead and i had to send it in. fortunately, they repaired it within warranty).
Click to expand...
Click to collapse
See, this is what I was trying to say! I read everywhere that if somethign is on the screen the Jig will work, otherwise it wont. Others are replying to me here saying it should still work for me
I'm not too worried about it. I have 4 of the phones. I work closely with Samsung and they were given to me. It would still be nice if it recovers, so we will see!

i guess in situations where it was reported to work under these conditions the owners didnt fully exploit all different possibilites to get it back on and so they just came up with this false assumption.
nonetheless, it's worth a try. at least, the jig is pretty useful to remove the yellow exklamation mark and to reset the flash counter .

lazyb2k said:
i guess in situations where it was reported to work under these conditions the owners didnt fully exploit all different possibilites to get it back on and so they just came up with this false assumption.
nonetheless, it's worth a try. at least, the jig is pretty useful to remove the yellow exklamation mark and to reset the flash counter .
Click to expand...
Click to collapse
That's another thing I am unsure of, whats the flash counter?

bncplix said:
See, this is what I was trying to say! I read everywhere that if somethign is on the screen the Jig will work, otherwise it wont. Others are replying to me here saying it should still work for me
I'm not too worried about it. I have 4 of the phones. I work closely with Samsung and they were given to me. It would still be nice if it recovers, so we will see!
Click to expand...
Click to collapse
I'm not saying it will work for sure, what I'm saying is depending on the damage done it may still get you into download mode so you can flash the firmware.

bncplix said:
That's another thing I am unsure of, whats the flash counter?
Click to expand...
Click to collapse
to be precise, it's the "custom binary counter" which counts up as soon as you flash something modified manually on your phone. has nothing to do with your problem, though.

We need to find the way to boot the device externally, i.e. bootloader on ext. SDCard or the likes....

[Q] Can't get into Download Mode after Odin Flash

First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.

mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).

That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.

i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him

Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...

mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot

I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.

PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.

Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.

PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?

Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.

PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.

Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.

PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match

[N8013] HELP!!! Trying to go back to Stock

So I had flashed my n8013 to the Germany n8010 4.1.1 firmware using this:
http://forum.xda-developers.com/showthread.php?t=2048213
Then today I tried to restore back to UEALH2 n8013 stock:
http://forum.xda-developers.com/showthread.php?t=2100971
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!

Here is what you do
Go into recovery do a complete wipe
Download the rom from here http://www.hotfile.com/dl/178484761/092fdea/N8013UEALI3_N8013XARALI3_XAR.zip.html
and Flash it with Odin, should work fine

vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Click to expand...
Click to collapse
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.

Can't reach stock recovery
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.

vypor87 said:
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
Click to expand...
Click to collapse
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.

BarryH_GEG said:
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Click to expand...
Click to collapse
The first link was trying to use the US ICS Rom via Odin. My note won't get in a functional state either way

BarryH_GEG said:
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
Click to expand...
Click to collapse
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
edit: sorry Barry I'm getting you confused with HG! in the other forum page.

vypor87 said:
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
Click to expand...
Click to collapse
That's swell. Can you get in to download mode?

BarryH_GEG said:
That's swell. Can you get in to download mode?
Click to expand...
Click to collapse
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.

vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.

vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
Here is the official md5 file for the XAR N8013 Note 10.1: http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=XAR&os=1&type=3#firmware
Hope this helps.

BarryH_GEG said:
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
Click to expand...
Click to collapse
K, downloading right now. I actually spent the $9 to get a month subscription to hotfile to download faster. Not helping much as it's not my best bandwidth but i hope it works!!

Holy s*** it's aaaaa-live!!! It's alive it's alive!!! DEF-CON lowered now. I had another UEALH2 rooted tar on my machine and I cannot remember which forum page I downloaded it from sadly. I had downloaded it back in August on the 24th. It's dated the 22nd of August. The other tar I downloaded was dated the 22nd also but it was different somehow. The name scheme on this one is UEALH2_rooted_system.tar and it worked. Unlike UEALH2_prerooted.tar. That one almost screwed me up! I need to find where this original file came from. Either way I'm back on ICS and plugged into a wall. It's taking me through all the initial setup crap right now so it's hard to tell how low I got it but I started this night flashing with about 56% battery. And when you start with half a battery you start regretting things shortly after when you botch something up big time!
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!

Spoke too soon. This is the one where the touchscreen stops working. FML... Still downloading the HotFile link of the image Barry sent.

vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue.
Click to expand...
Click to collapse
vypor87 said:
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Click to expand...
Click to collapse
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?

RandomAwesomeGuy said:
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Well heres the worry about the charging I had. Motorola phones are not very forgiving to charge unless youre booted or on the battery charge screen. Thats why I was freaking out. I kies updated from that same botched image and it seemed to resolve my touchscreen issue. Time will tell. Only problem is now I forgot to protect root before the update so superuser doesnt know where to find the binaries. Does the CF Autoroot still work with 4.1.2? If so ill just use that.
Either way, enough problems cleared for one night. Im going to bed. Gotta wake up for work in the morning.
Sent from my GT-N8013 using xda premium

RandomAwesomeGuy said:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Hopefully nothing. Mine's just the direct link to the Samsung-Updates upload. Where files exist in both places I post Samsung-Updates version because you don't need to register.

BTW thank you guys. It's always good to know that the community is looking out for each other. I think once I'm "100%" stock TriAway and all I ain't flashing to a different stock base again. Lol. Although I do like the stock German folders vs the crappy US ones that are literal folders that are ugly. Guess I need to find a new launcher. And Barry thanks for helping me enjoy 4.1.1 in the meantime!
Sent from my DROID RAZR using xda premium