Related
Hi, did a few searches about this but couldnt find anything.
Is it possible to make the device(in my case, the Hermes) act as a keyboard for another device?
The thing is, i have a Xbox 360, and today they released a update which among other things contained msn/live messenger integration.
and to make it easier to use this, Microsoft are launching a keyboard, which you plug in the controller ,blablabla.
But they havent released it yet, so, i was thinking of using the kard-Keyboard on my device as a USB keyboard for it.
any comments?
Never heard of anyone doing an app like this.
It is possible theoretically but someone would have to write a special program that would kill AS, then take over the USB port and identify as a keyboard.
Doubt any one will bother with this since there are plenty of real USB keyboards available at any computer store (small ones too)
the tricky part would be that the program would have to change what kinda usb device the pda would say it was
sounds like some lowlvl hacks would be required
As far as I know this isn't so hard. For example WM5torage does similiar thing by emulating Mass Storage Device. Personally, I would be interested in the bluetooth keybord emulation.
This is technically possible, but somebody will have to write USB function driver for HID device class for that.
For bluetooth - dont sure, if stack will allow extension.
how hard would that be?
Looking to use the g1 as a usb keyboard for a desktop. Have not found anything online yet but wondering if anyone has any more info on this
aad4321 said:
i would imagine no one has done this because it dosent sound very practical. i think you can do it over wifi with an app, but im not 100%
Click to expand...
Click to collapse
Yeah i have gmote installed but im looking to connect it through usb because i need a usb keyboard for a computer that is having problems booting and to enter some recovery console modes i need a keyboard that works(mine crapped out)
The G1 would have to support the HID BT profile to act as a keyboard - which it doesn't. It only supports Hands Free and Head Set profiles AFAIK.
/Mats
Picked up an A500 today after carefully reading through the documentation on Acer's support site as well as the user manual for mentions of USB keyboard support. It says implicitly that there IS support for USB keyboards (just not USB mice yet). However...I can't get a single USB keyboard to work (I've tried 3). Anyone tried this yet and gotten it working? I know the USB slot is working ok, because it reads a thumb drive just fine. Thanks!
meatlocker said:
Picked up an A500 today after carefully reading through the documentation on Acer's support site as well as the user manual for mentions of USB keyboard support. It says implicitly that there IS support for USB keyboards (just not USB mice yet). However...I can't get a single USB keyboard to work (I've tried 3). Anyone tried this yet and gotten it working? I know the USB slot is working ok, because it reads a thumb drive just fine. Thanks!
Click to expand...
Click to collapse
I have had no problem with the one USB keyboard I've tried. It's a generic Apple clone from Deal Extreme.
No luck with Bluetooth keyboards though.
i could not get it to work with wireless USB keyboards but it did work with a dell USB keyboard.
it works with a logitech wireless keyboard
(I just realized that this is in the Dev section - mods, please move if needed!)
I tried a Dell keyboard, and it worked. One of the things I really hoped was going to work was the GTab case/usb keyboard combo ...the A500 fits perfectly in this case, even more snuggly than the GTab. I can't understand why it doesn't work.
meatlocker said:
(I just realized that this is in the Dev section - mods, please move if needed!)
I tried a Dell keyboard, and it worked. One of the things I really hoped was going to work was the GTab case/usb keyboard combo ...the A500 fits perfectly in this case, even more snuggly than the GTab. I can't understand why it doesn't work.
Click to expand...
Click to collapse
I tried a cheap chinese case/usb keyboard combo and it worked but the a500 doesn't fit in...
USB keyboard
Got a case/stand for my vega for £20 of amazon which has a built in usb keyboard, tried it on the iconia works 100%
Actually I think having mouse support would be nicer, maybe in imminent 3.1 release.
KEyboard
I did not have a regular USB keyboard laying around so I tried a PS/2 using a PS/2 to USB adapter and worked perfect.
VitaZora said:
I have had no problem with the one USB keyboard I've tried. It's a generic Apple clone from Deal Extreme.
No luck with Bluetooth keyboards though.
Click to expand...
Click to collapse
Just posted in the "Iconia A500 Accessories" forum... I tested the Logitech Cordless MediaBoard Pro for PS3 (bluetooth keybd) and it worked !
Something people may need to note: When I plug a keyboard in while the screen is off, or is locked, it does not work. If I first login, THEN plug in the keyboard (Logitech multimedia USB keyboard) it works great.
i tried some cheap micro keyboard+trackpad combo (about as wide as the tablet in landscape) & had issues. Only time it worked was when I was in the URL bar of the browser, "physical keyboard" showed as an input type option. Anywhere else it just sat plugged in. I may steal my dad's Mac BT keyboard since he doesn't use it. Will clash horribly though
I've got it running on a BT Keyboard/mouse device Works great... I've had issues with the headphones plug not stopping my music... (listen to Hard Rock at work and everyone hears it =(oops).. pull headphones and plug them back in... lots of really little niggles that need to be worked out... hopefully acer will find them all with the update next month!!!
threedfreek said:
I've got it running on a BT Keyboard/mouse device Works great... I've had issues with the headphones plug not stopping my music... (listen to Hard Rock at work and everyone hears it =(oops).. pull headphones and plug them back in... lots of really little niggles that need to be worked out... hopefully acer will find them all with the update next month!!!
Click to expand...
Click to collapse
Ohhhh! I've always wondered about that keyboard! Does the trackpad work? How's typing with that keypad?
Touch pad works great for pc and playstation 3... etc... but for the acer it does nothing... Arrows work to get from item to item typing works great... I believe an update will/can allow mouse...
FYI... this device comes with it's own bt usb adapter that is really weak however, when connected to a bluetooth device has decent distance.
threedfreek said:
Touch pad works great for pc and playstation 3... etc... but for the acer it does nothing... Arrows work to get from item to item typing works great... I believe an update will/can allow mouse...
FYI... this device comes with it's own bt usb adapter that is really weak however, when connected to a bluetooth device has decent distance.
Click to expand...
Click to collapse
How's the hardware? Solid? Connectivity in and out? And how easy/difficult was it to pair? I've read that a lot of these no-name devices don't come with specific instructions on pairing.
rorytmeadows said:
How's the hardware? Solid? Connectivity in and out? And how easy/difficult was it to pair? I've read that a lot of these no-name devices don't come with specific instructions on pairing.
Click to expand...
Click to collapse
Pairing was as simple (on my samsung epic) as searching for devices.
1. push the bluetooth button till the light blinks
2. Search for devices
3. type in a passcode on phone/device
4. type that passcode on the keyboard
I think this is how it was done... worked really well first time to my epic... easily connected on my a500 too. I love the keyboad it works with my entertainment pc that has sagetv on it so controlling the 47" from the couch is awesome.
edit: Hardware is really solid and the bt usb device slides into the keyboard... really convenient
I managed to pair with my Apple wireless KB but no love for typing.
ramy717 said:
i could not get it to work with wireless USB keyboards but it did work with a dell USB keyboard.
Click to expand...
Click to collapse
ditto here.
peyotll said:
I tried a cheap chinese case/usb keyboard combo and it worked but the a500 doesn't fit in...
Click to expand...
Click to collapse
Which one?
EVO Mobile
My cherry keyboard doesn't seem to run. Sad
DMESG says the following:
<6>[ 660.363583] usb 1-1: new low speed USB device using tegra-ehci and address 6
<6>[ 660.410104] usb 1-1: New USB device found, idVendor=046a, idProduct=0023
<6>[ 660.410487] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[ 688.559913] usb 1-1: USB disconnect, address 6
I tried these instructions to connect an external USB keyboard to my X5, but I didnt work:
http://gigaom.com/mobile/how-to-add-a-usb-keyboard-to-an-android-phone/
Do anyone knows if it is possible for our beloved U8800?
I cant be 100% sure, but keyboards and other stuff, like mouse or usb storage need usb host, and i think that our u8800 doesn't have it.
julle131 said:
I cant be 100% sure, but keyboards and other stuff, like mouse or usb storage need usb host, and i think that our u8800 doesn't have it.
Click to expand...
Click to collapse
in kernel source in compiler directives or how da hell that stuff calls i saw some lines regarding of OTG but that's it i can't help here anymore... the best i think s to use bluetooth..
PS the topics who is not requiring development info, code - should not be in dev section
I posted it here in the hope that something can be done in the ROMS to enable this feature.
Before I start, I don't believe this belongs in the Accessories category because it is a software/development question.
I have a standard OTG cable, bought it for my Evo 3d and it works fine. Plugging it into my new Nexus 10 (Unlocked and rooted of course) I got the pleasant surprise that it provides enough power from the tablet alone to power most USB devices (even my 2.5" hard drive!). Now, when I used the OTG cable on my Evo 3d, I was able to plug in my Logitech unifying receiver and connect my mouse and keyboard with no setup required (keyboard just works, mouse shows a cursor). With the Nexus 10, no such luck.
I was able to download the USB Host Diagnostics app from the Play Store, and I can see that it is recognizing the adapter no problem, but it is not loading input drivers or setting them to be input devices.
Dmesg from Evo 3d when plugging in OTG + Logitech receiver with mouse and keyboard: http://pastebin.com/kBbZEwXD
Dmesg from Nexus 10: http://pastebin.com/0yyFZK7u
Now, I know my cable works fine with the Nexus 10 because I can mount mass storage no problem.
I would love for someone with some more knowledge of USB host mode to maybe provide some feedback or support.
I'm more than happy to provide any more information needed.
Thank you ahead of time.
EDIT: Solution
craigacgomez said:
Kernel with Logitech Unifying device support available... Download manta-kernel-cgomez.xxxxxxxx.zip from here (xxxxxxxx would be the date of the kernel)
http://forum.xda-developers.com/showthread.php?t=1998585
Click to expand...
Click to collapse
I'm trying to get this working... I think I have the changes needed... I will let you know soon...
ahorner said:
Before I start, I don't believe this belongs in the Accessories category because it is a software/development question.
I have a standard OTG cable, bought it for my Evo 3d and it works fine. Plugging it into my new Nexus 10 (Unlocked and rooted of course) I got the pleasant surprise that it provides enough power from the tablet alone to power most USB devices (even my 2.5" hard drive!). Now, when I used the OTG cable on my Evo 3d, I was able to plug in my Logitech unifying receiver and connect my mouse and keyboard with no setup required (keyboard just works, mouse shows a cursor). With the Nexus 10, no such luck.
I was able to download the USB Host Diagnostics app from the Play Store, and I can see that it is recognizing the adapter no problem, but it is not loading input drivers or setting them to be input devices.
Dmesg from Evo 3d when plugging in OTG + Logitech receiver with mouse and keyboard: http://pastebin.com/kBbZEwXD
Dmesg from Nexus 10: http://pastebin.com/0yyFZK7u
Now, I know my cable works fine with the Nexus 10 because I can mount mass storage no problem.
I would love for someone with some more knowledge of USB host mode to maybe provide some feedback or support.
I'm more than happy to provide any more information needed.
Thank you ahead of time.
Click to expand...
Click to collapse
Same problem here. I originally bought the combo for my Iconia, which had a full size USB port, but I couldn't get them working on the N10. My wired USB mouse and my DSLR camera both connect and work fine though...
craigacgomez said:
I'm trying to get this working... I think I have the changes needed... I will let you know soon...
Click to expand...
Click to collapse
I hope it ends up being something small and flash-able as a fix, instead of having to flash a completely new ROM. Either way thanks!
OK, I've got the Logitech Unifying support working... tested it with my keyboard and mouse... all good... it's a new kernel... I will upload it soon...
ahorner said:
Before I start, I don't believe this belongs in the Accessories category because it is a software/development question.
I have a standard OTG cable, bought it for my Evo 3d and it works fine. Plugging it into my new Nexus 10 (Unlocked and rooted of course) I got the pleasant surprise that it provides enough power from the tablet alone to power most USB devices (even my 2.5" hard drive!). Now, when I used the OTG cable on my Evo 3d, I was able to plug in my Logitech unifying receiver and connect my mouse and keyboard with no setup required (keyboard just works, mouse shows a cursor). With the Nexus 10, no such luck.
I was able to download the USB Host Diagnostics app from the Play Store, and I can see that it is recognizing the adapter no problem, but it is not loading input drivers or setting them to be input devices.
Dmesg from Evo 3d when plugging in OTG + Logitech receiver with mouse and keyboard: http://pastebin.com/kBbZEwXD
Dmesg from Nexus 10: http://pastebin.com/0yyFZK7u
Now, I know my cable works fine with the Nexus 10 because I can mount mass storage no problem.
I would love for someone with some more knowledge of USB host mode to maybe provide some feedback or support.
I'm more than happy to provide any more information needed.
Thank you ahead of time.
Click to expand...
Click to collapse
For future reference, this belongs in Q & A.
Kernel with Logitech Unifying device support available... Download manta-kernel-cgomez.xxxxxxxx.zip from here (xxxxxxxx would be the date of the kernel)
http://forum.xda-developers.com/showthread.php?t=1998585
Flashed your kernel on my stock rooted firmware and it is working great with my full size logitech keyboard and mouse as well as my mini keyboard/trackpad combo.
Thank you!!
Sent from my Nexus 10 using xda app-developers app
craigacgomez said:
Kernel with Logitech Unifying device support available... Download manta-kernel-cgomez.xxxxxxxx.zip from here (xxxxxxxx would be the date of the kernel)
http://forum.xda-developers.com/showthread.php?t=1998585
Click to expand...
Click to collapse
This works great! Thank you so much!
Logitech Unifying Adapter & Sony Xperia S
Hey guys,
I know I'm in the wrong section but I don't know if I ever can solve this problem:
I have a Sony Xperia S with the newest Jelly Bean .211 and this FW cannot identify my Logitech keyboard with a unifying 2.4GHz adapter. All keyboards and mouses with this adapter don't work. I see with USB Host Controller APP that the adapter is recognized with the right vendor and device id but the Xperia S does nothing. With ICS and GB we hadn't this problem. I think only the drivers are missing. I called the Sony support and they told me to do the same studip thing: factory reset, reflash the FW bla bla... :silly: But it's a FW related problem and so on I'm googling this since 2 months and i cannot find anything to solve this. And today I saw this thread. I hope anyone can tell me which files are needed to recognize my Logitech keyboard on USB OTG as a keyboard and to use it. I saw that this problem was solved for the Nexus 10 but only as a kernel and I need only the files or drivers.
Please help
Regards
Just curious , would this kernel help to make a Logitech steering wheel usable as well ?