[Q] wifi gone - HD2 Android Q&A, Help & Troubleshooting and Genera

I have lost my WiFi settings and I'm unable to recover them.
I suspect an app called "green power battery saver" massed it all up and now there is no way to connect to my home or any other wifi network.
I ve tried everything uninstalling the app, reformating sd to flashing differnet roms ,flashing windows roms ,task 29 etc just to recover wifi conectivity.
I know that there is nothing wrong with the hardware cuz it runs perfectly on windows 6.5.
plese help me. I dnont want to go back to windows.please

Related

Ipaq 614c wifi missing

Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191
Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx
what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?
Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.
Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint
Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken
Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards
Flash original ROM with downgrading radio to 0.88
Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards
Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...
oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...
Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it
bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu
Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.

HElp Please - Usb Connection issues Phone & Win 7

My Phone does not see USB connection for Activesync but is does see it to charge. Also my PC doesn't see my Phone via the USB
What do I need to do to establish a active sync USB connection
It will connect via blue tooth - but I need the connection back.
Can anyone Help please
P.S. I have used serveral Roms on my device.
try to put ure phone in restore or boot screen mode then try to plug it in , coz it happened to me as well , as i m typing now....
That doesn't work.
I have installed a couple of roms since this issue became an issue but i installed them via the microsD.
Any Other Ideas?
check usb settings
Are you able to connect usb, and see the contents of mirco sd card
sometimes the "usb to pc" setup may be set to disk content instead of activesync
check : settings/system/usb to pc
Ive had this problem a little over a month now, couldnt find a solution neither. For me an error comes up saying "device not recognised" (i opened up the device, checked for any hardware f ups, couldnt find any.. Although it cant be software either coz if flashed so many times after it with the same problem.. Really weird. If you find a solution, id love to know it to.
Regards
Is there way we can raise this so more people can see this issue.
I have install roms before the issue and since it happened I have done via the MicrosSD.
There must be a way of sorting this
Will a task 29 help?
Dark Ninja said:
Ive had this problem a little over a month now, couldnt find a solution neither. For me an error comes up saying "device not recognised" (i opened up the device, checked for any hardware f ups, couldnt find any.. Although it cant be software either coz if flashed so many times after it with the same problem.. Really weird. If you find a solution, id love to know it to.
Regards
Click to expand...
Click to collapse
you could try a task 29 or install a original rom to see if the problem go away
skodann said:
you could try a task 29 or install a original rom to see if the problem go away
Click to expand...
Click to collapse
Sorry I cannot connect to my PC in any way other than bluetooth or MicrosSD so I cannot use Task 29.
I'll try a stock rom.
Does anyone know where to find the latest stock ROM from orange UK
Thanks for the Advice skodann
MOD EDIT - Moved to General discussion as not related to rom development
Task 29 cannot be done because of the USB port not funtioning.. and flashinga stock rom didnt work, maybe it needs to be done by USB?
BTW, should say this before, once you flash stock, you cant go back to HSPL as HSPL can not be flashed without USB..

Bluetooth + WiFi wont work

Hi,
I have a Blackstone which i updated with 5 different ROMs. Bluetooth + WiFi wont work somehow. It doesnt find and Device and revert is also not possible
Any idea what can be the reason?
Nobody knows?
Same problem with me ..
I've tried over 10 ROM applications, opening the phone, tried again to connect the cables (wifi) to the motherboard, no help .. Is it a problem to the EEPROM?

US T-Mobile G1 stucked at Google Account Sync activation

Hello folks, I have purchased a US T-Mobile G1 from the market on this forum and it was unlocked and rooted with latest version of cyanogen mod. Yesterday night while playing with the phone ( I am totally noob with the G1 ) I accidentally wiped everything back to the stock fw, so I lost dangerSPL, HDBoot and also the recovery partition has been corrupted.
Now with the stock firmware I am stuck with the google account sync even though if I press the menu button the APN editing option comes up and it lets me add the APN of my Italian sim card, but no matter what I do it just don't work, it keep say there's a problem with my SIM card network, and to try again.
Also when I turn on the phone I can see a screen that says Aperture Laboratories, with a draw of a cake which says "don't worry u still got root"
What is that??? a sort of perm root??
I been googling for a whole day now about how to bypass this process and I don't seems to have found any working informations.
Can anyone help me please ??? I am desperate ...
The only guide apparently working regarding bypassing the google account sync I have found is this one http://forum.gsmhosting.com/vbb/f606/bypass-t-mobile-g1-google-activation-phonecarecenter-781472/ , the problem is I can't just get to install the correct driver on Windows XP SP2/SP3 neither on Windows 7 32bit, I have tried the impossible, but it just doesnt work, and with the default windows 7 driver it can't be seen through adb devices... Is there a way to do it on Linux or Mac ??? Any working usb driver for Linux or osx ???
Does anyone have any idea??? I think the only way to activate this G1 is with a T-Mobile US sim card which I don't have and I don't have chance to get as I am in Italy, any help please ??? If I don't get that god damn home screen I wont be able to do anything ....
Umm - me too,in the same place .
Can't make my Windows (and i tried to use XP an Vista) to recognize HTC G1 as phone, not 'usb mass storage device'
I have successfully activated my G1 through wifi. Regarding the driver installation, I have went through this guide and I have followed it to letter, and it worked, hopefully it will work out for u..

General Magdlr malfunction? Mods May Remove

UPDATE: MODS REMOVE THIS THREAD, FIGURED IT OUT WITH SOME MORE DIGGING, THANKS!
Ok, I have the TMO Leo, currently running Tyween's TyphooN cm7 port. I need to reset the phone and going to privacy->reset phone does nothing for me.
I tried doing a clean install of the entire rom, but I'm running into issues everywhere with magldr or the phone in general.
First off, I've downloaded both WMDC 6.1 and HTC Sync (Although htc sync doesn't load after many attempts to repair, and uninstall/installs I get the error : The Program can't start because the tlib_log.dlll is missing from your computer. Try reinstalling... Blah)
But the computer recognizes the phone's driver now.
I tried running Task29 to no avil, and then figure I'd skip that set, tried to reinstall magldr (being that booting with power down ONLY boots into the boot loader (also tried reinstalling CWM from the app on the phone, also to no avil)). The computer shows that madldr was installed successfully but, it won't launch into it. Yet I know magldr should already be there, since it's needed to load the current ROM, which works great (minus the the unable to reset thing...)
My other thought was trying to restore the phone to WM and just go from there, but being that WMDC won't recognize the phone, I can't really do that as far as I know.
Any help would be greatly appreciated! ASAP too
Side note: Need to do the whole reset because friend is currently in need of a phone, and I'd rather not give him my main phone (mytouch4g) because I'm a bit partial to it lol, don't hate on me for that please

Categories

Resources