[Q] wp7 rom chefs quick question - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

wp7 make a partition on your sd card using the whole thing. correct?
can you make it so when you install wp7 it only uses 8gb partion on SD card?
Then I would be able to boot ad from sd or ubuntu.
the only tutorial on how to dual boot wp7 and AD, you need a 8gb sd card. I have two 16gb SD cards
Any answers would be helpful
Thanks

i also dont have a sd card reader on my computer

evily2k said:
wp7 make a partition on your sd card using the whole thing. correct?
can you make it so when you install wp7 it only uses 8gb partion on SD card?
Then I would be able to boot ad from sd or ubuntu.
the only tutorial on how to dual boot wp7 and AD, you need a 8gb sd card. I have two 16gb SD cards
Any answers would be helpful
Thanks
Click to expand...
Click to collapse
There are a couple tutorials for partitioning your sd card to dualboot wp7 and android. There's a thread in this section and another thread in the hd2 android sd dev section. If the tutorials use a 8gb card as example, it doesn't mean you can't use any other size. I have a 32gb card partitioned.
And you can use magldr in mass storage mode as a card reader, but it will sometimes corrupt the file or card, so if you have no other card reader, use magldr, but if you can use a card reader, I'd go that way.

Related

[Q] MicroSD Card Problems

Hi, I've just got WP7 on my HD2. I had it before, and the current problem was not there, but now I have installed WP7 again, ZUNE and the actual phone does not recognize my 8GB MicroSD HC Class 4 card.
Is there any way of resolving this? As I said, when I had installed WP7 before, Zune regonized the MicroSD card, but now, does not.
Thanks in advance.
I'd follow these instructions (not necessarily all the way), but installing easeus partition will give you a better understanding of whether your sd card has been formated for wp7
[REF] Tutorial: How to partition sd card to run wp7 and android from same sd card
Canterbury said:
I'd follow these instructions (not necessarily all the way), but installing easeus partition will give you a better understanding of whether your sd card has been formated for wp7
[REF] Tutorial: How to partition sd card to run wp7 and android from same sd card
Click to expand...
Click to collapse
Just to say, I do not have an adapter.
ahha - ok, well aside from going and buying one, i'd try the following..
try re-seating sd card.. then
goto settings -> about -> reset phone.
this will reset device and wp7 will try to format the sd card..(all data will be lost obviously)
if that doesn't help, try the above with the sd card removed,(remove the sd card while in wp7, then reset)
allow it to boot up into wp7
re-insert sd card and re-set phone again.
(this is based on experience from formating my sd for dual boot)....
did you have your sd card out when you installed wp7? cause if you did then you would have to do it all over again i think in order for your phone to recognize your sd card.

[Q] Viewing movies and files from SD Card

I recently changed over to WM7 on my HTC HD2. I've installed all of the software but it won't view my SD card. Is there something i'm missing?
Thanks
installed once the attached file. so you can access on your sd card
wfontenot said:
I recently changed over to WM7 on my HTC HD2. I've installed all of the software but it won't view my SD card. Is there something i'm missing?
Thanks
Click to expand...
Click to collapse
The SD card has to be in your phone when you first boot wp7, and wp7 formats and makes sd part of internal memory. You cannot read other sd cards with wp7 except the one that is formatted and part of the memory, but you can not take that card out and use with a card reader after that. WP7 doesn't support the reading of external memory cards.

Why my HD2 android won't start with my SD card?

My HTC HD2 works with my Transcend 4 GB microSD card, but it won't android won't boot up with my 8 GB Verbatim microSD card. Do I need to format it or something? Thanks!
Are you sure you have the correct set up ? (Files are copied to their destinations)
Try to format it to FAT32, and try again.
I`have just formated it to FAT32 and still the same problem. What files are you talking about?
PS: Sorry to bother you with "stupid" questions, I am pretty noob in this
I have read that Verbatim SDCards can cause problems in the build; booting or running, SanDisk is your best bet, but you may still be able to get it running,
Im not a dev; just brought SanDisk as a result of this,
Alex
Superdod said:
My HTC HD2 works with my Transcend 4 GB microSD card, but it won't android won't boot up with my 8 GB Verbatim microSD card. Do I need to format it or something? Thanks!
Click to expand...
Click to collapse
It depends on many factors. Which Android Rom do you want flash, does this need Ext 3/4 Partition on the SD Card ? Do you have flashed the right partition size ? Read the installation instructions of Rom you wants to flash, there you mostly find all information.
Are you talking about NAND or SD? If NAND, make sure the ext partition is set up correctly, as this is where a lot of the apps are stored. If SD, then I would assume you know how to install an SD build so it could be a problem with the SD card being incompatible as alex.odell.2011 said.
I've had similar problems sometimes with my SD card; my HD2 wouldn't boot unless I took the card out then put it back in once it was booted. The only thing that I thought might cause it is something CWR related on the SD card, since I had used it in my Hero and Droid 1 as well to flash ROMs to them. It was a class 4 16 GB Sandisk, if that helps at all.

I have a problem with SD Android installing?

Hi;
I use WP7 on my HTC HD2.
Also I use SD Android and i start android from magldr.
When i want to install SD android on my "HP 16 GB Class 10 micro SD card" , i have installing problem.
While installing it freezes. I can't finish installing.
I don't see main screen.
But when i install same android rom on 2 GB micro SD card , there isn't any installing problem.
It runs perfectly.
Why does this problem occur on 16 GB Class 10 HP micro SD card?
Thanks a lot...
first of all this should be in the Q&A section.
is your SD card formatted to run dual boot? was the 2nd partition for Android set to Primary? also you don't install SD ROM, you just copy it to your SD & set magldr to run AD from SD
http://forum.xda-developers.com/showthread.php?t=1150369
http://forum.xda-developers.com/showthread.php?t=1048649
...high classes not necessarily good for android use
mengfei said:
first of all this should be in the Q&A section.
is your SD card formatted to run dual boot? was the 2nd partition for Android set to Primary? also you don't install SD ROM, you just copy it to your SD & set magldr to run AD from SD
Click to expand...
Click to collapse
In my Sd card only android. There isn't any partition.
musti35 said:
In my Sd card only android. There isn't any partition.
Click to expand...
Click to collapse
If you are dual booting you should have two partions.The android partions should be fat32 32kb cluster size and both partions should be set to primary.
Sent from my GT-I9100 using xda premium
wis1152 said:
If you are dual booting you should have two partions.The android partions should be fat32 32kb cluster size and both partions should be set to primary.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I dont have dual booting.
WP7 SD card is different from Android sd card
musti35 said:
I dont have dual booting.
WP7 SD card is different from Android sd card
Click to expand...
Click to collapse
then you should try this
How To Dual Boot Windows Phone 7 And Android On HTC HD2
http://forum.xda-developers.com/showthread.php?t=913815
http://www.addictivetips.com/mobile/how-to-dual-boot-windows-phone-7-and-android-on-htc-hd2/
I going to grab sandisk class10 uhs1 . Is that would make my android perform good as well ?

Problem with new sd card with SD development of any android

Hi
I bought new sd card, MicroSD HC (4) 8GB. I have download new development of SD Android, I have put all files on this SD card, i tap clrcad and haret and botting was started, small font in left upper corner, development logo and reset the phone... All developments looks ok, I have made all steps on other 2GB sd card and all works. Only problem with this new one 8gb Now i am using other 8GB card (old one)...
new sd card must be special prepared for SD developments? No needed nand, no needed magldr etc... Only simple sd development
File system on new card- fat32 / 32kB
i search of help :<
regards
ClubBase
Hi ClubBase, welcome to the forum.
Which sd build are you trying to install?
You could try formatting your card with https://www.sdcard.org/downloads/formatter_3/
Robbie P said:
Hi ClubBase, welcome to the forum.
Which sd build are you trying to install?
You could try formatting your card with ...
Click to expand...
Click to collapse
Hi
Any kind of SD build. Any development won't work on this MicroSD card :/
Thank U for the link, today I will try to format sd card @ my home

Categories

Resources