Related
I9000 unlock instructions
1. Power on the phone and go to Applications->Settings->About Phone->USB
settings
2. Select Mass Storage
3. Connect the phone to USB cable
4. Swipe down the top notification bar then tap “USB Connected” then select
MOUNT
5. Copy update.zip file to phone mass storage root
6. Power off the phone
7. Press Volume Up+Home+Power on key to start the phone into recovery
mode
8. Go to “apply sdcard:update.zip” using volume keys then select it using
home key
9. Power on the phone then go to Andoid Market and install Terminal
Emulator
10. Run Terminal Emulator
11. Type cat /efs/nv_data.bin >> /sdcard/nv_data.bin into terminal then type
Enter
12. Connect the phone to PC in USB Storage Mode then copy nv_data.bin file
to your pc
13. Open nv_data.bin file with any hex editor (ex. Hex workshop) then go to
address 00181460
14. There are the codes
15. Power on the phone with any unaccepted sim card inside then type in the
first code to unlock the phone
I9000 drivers
I9000 drivers
This solution is is not working for me. The problem is that the Update.zip says:
E: Signature verfication failed
Installation aborted
Any advice? How to install that update.zip package?
cellularhut said:
I9000 unlock instructions
1. Power on the phone and go to Applications->Settings->About Phone->USB
settings
2. Select Mass Storage
3. Connect the phone to USB cable
4. Swipe down the top notification bar then tap “USB Connected” then select
MOUNT
5. Copy update.zip file to phone mass storage root
6. Power off the phone
7. Press Volume Up+Home+Power on key to start the phone into recovery
mode
8. Go to “apply sdcard:update.zip” using volume keys then select it using
home key
9. Power on the phone then go to Andoid Market and install Terminal
Emulator
10. Run Terminal Emulator
11. Type cat /efs/nv_data.bin >> /sdcard/nv_data.bin into terminal then type
Enter
12. Connect the phone to PC in USB Storage Mode then copy nv_data.bin file
to your pc
13. Open nv_data.bin file with any hex editor (ex. Hex workshop) then go to
address 00181460
14. There are the codes
15. Power on the phone with any unaccepted sim card inside then type in the
first code to unlock the phone
Click to expand...
Click to collapse
Fantastic find if it works, my phone is unlocked so I can't test it but thanks a lot for sharing!!! Priceless
N.B. The first 8 steps are the process for rooting your phone, since you need to be root to do step 11. If you already have a rooted phone, start from step 10.
tyxerakias said:
fantastic find if it works, my phone is unlocked so i can't test it but thanks a lot for sharing!!! Priceless
n.b. The first 8 steps are the process for rooting your phone, since you need to be root to do step 11. If you already have a rooted phone, start from step 10.
Click to expand...
Click to collapse
1000000000000000% working tested before post here !!!!!
I am following 100% tutorial but I am unable to unlock my I9000. Look at the screenshot for the error that I encounter.
I have put the update.zip in root of phone memory, root of MicroSD etc but no chance. Do I need to root the phone or what's the problem?
Thanks
erreterr said:
I am following 100% tutorial but I am unable to unlock my I9000. Look at the screenshot for the error that I encounter.
I have put the update.zip in root of phone memory, root of MicroSD etc but no chance. Do I need to root the phone or what's the problem?
Thanks
Click to expand...
Click to collapse
Please read my post above. By doing this, you are rooting your phone.
It seems that the update.zip has not been properly signed, I see that it contains a new busybox, maybe the OP tried to optimise it and failed?
Use the original update.zip from the FAQ (http://www.multiupload.com/JHIFK9K80P) to root your phone, then continue from step 9.
The same happens with the file that I downloaded from your posted link!!!
Whats going wrong here?
Tyxerakias said:
Please read my post above. By doing this, you are rooting your phone.
It seems that the update.zip has not been properly signed, I see that it contains a new busybox, maybe the OP tried to optimise it and failed?
Use the original update.zip from the FAQ (http://www.multiupload.com/JHIFK9K80P) to root your phone, then continue from step 9.
Click to expand...
Click to collapse
No idea. Have you rooted your phone already? Have you installed any mods or firmwares?
No need to root
You dont need to root your phone to get to Step 11. The Terminal Emulator I installed from the Market let me do Step 11 directly.
All I then just did was email the nv_data.bin file to my inbox and later just open it in Textpad.
So, it was a bad tutorial. I tried to go step by step but now I begin from step 11 and everything is OK. My first I9000 unlocked like a charm
Thanks
knkartha said:
You dont need to root your phone to get to Step 11. The Terminal Emulator I installed from the Market let me do Step 11 directly.
All I then just did was email the nv_data.bin file to my inbox and later just open it in Textpad.
Click to expand...
Click to collapse
Huh. Interesting. I would have thought /efs is a protected folder.
I have a Bell one, i asked their staff when i bought my phone if i still on WARRANTY when i unlock the phone by Bell, they said yes.
Anybody know if i will lose my phone WARRANTY after i unlock the phone? Or can i lock it back if my phone have any problem in the future?
Thanks
could somebody point out which value in the address 00181460 says the unlock code?
erreterr said:
The same happens with the file that I downloaded from your posted link!!!
Whats going wrong here?
Click to expand...
Click to collapse
you should put the update.zip file on your internal sd card directory.
i encountered the same error when i put the update.zip file in the external sd card
erreterr said:
So, it was a bad tutorial. I tried to go step by step but now I begin from step 11 and everything is OK. My first I9000 unlocked like a charm
Thanks
Click to expand...
Click to collapse
which of the values in the said address gives the unlock code?
Hi,
I have a NSPRO box and read the unlock code, but as I insert it, it doesn't unlock the phone.
As this didn't work, I tried your method, and the code that showes up is the same as read by NSPRO box, and... it still doesn't work.
Attached is the printscreen of the HEX area where the code is. I've noticed it says "18146D" and not "181460" as your indicated. Could this be the reason why the code doesn't work?
Please help...
Samsung Vibrant SGH-T959 Recovery Mode
I've tried all sorts of button combinations to get the Samsung Vibrant T959 into recovery mode. I think since this device is a T-Mobile phone, the firmware has been modified for VolUp+VolDn+Pwr recovery mode.
As of now, the only way I know how to get the phone into recovery mode is by using the Android SDK and sending off a command: adb reboot recovery
I've been putting together an Android SDK & Rooting tutorial as well as other Samsung Vibrant T959 findings here: jordanpeterson.me/content/t-mobile-samsung-vibrant-sgh-t959
Sorry.. the external references aren't working.. Good spam rules on new users.
Thanks
Jordan
It worked great, althoug the address on my I9000 was 00181462. My suggestion is try to find closest address to the given by the tuturial....
Thanks for everything
Don't need to root the device. Download terminal emulater from Market. Went straight to step 10. Works like a charm. Thanks for the instructions.
Sent from my GT-I9000M using XDA App
hello bro
help me to root my mobile
i just update 528 and i am not able to root my mobile
help me ... can any one tell me where i am wrong
1.turn on usb debugging in settings -> applications -> debugging.
2.turn off fast boot option in settings -> applications
3.open dialer, type *#*#2846579#*#*, projectmenu, background settings, log setting, on, go back, open dump & log, turn on all options.
4.on the PC run runme.bat
5.wait for the complete restart.
i try DooMLoRD_v4_ROOT and superone click 2.3.3(this hang at 7 command)
Hello,
try this
http://forum.xda-developers.com/showpost.php?p=23565074&postcount=7
Prepare your phone for rooting:
1) Dial: *#*#2846579#*#*
2) Go to projectmenu > background settings > log settings > log switch > set Log on
3) Reboot Phone
4) Switch USB Debugging ON
5) Download B528_ROOT.rar (not SuperOneClick v2.3.3).
6) Plug your U8800 into your computer but DO NOT mount SD Card.
http://forum.xda-developers.com/showthread.php?t=1420728
For Linux users
7) Extract B528_ROOT.rar and open the file "B528_root.bat" with an editor.
8) Open a terminal as normal user and change into the directory with the file "B528_root.bat".
9) Copy the following commands step by step into the terminal.
Click to expand...
Click to collapse
I was able to root my phone (running with B528) with the solution from post #7 (B528_ROOT.rar). It's a solution for Windows users, if you are a Linux user, then try this
http://forum.xda-developers.com/showpost.php?p=24277960&postcount=2
Hth,
Ponder
thanks
thanks bro
i love you
root successful
faizan_950 said:
thanks bro
i love you
root successful
Click to expand...
Click to collapse
You are welcome
You can easily root the SmartQ Z1 (W1) ZWatch by modifying the firmware and updating it to the watch. I don't know of any rooting tool (like framaroot) that does the job on the watch without flashing the firmware.
[CREDIT TO GEEK78]
(1) READ the [HOW TO] in this thread by geek78 who first made a root firmware.
Download his rooted firmware HERE
Extract it with WinZip or similar zip utility - you should see files and folders which include "system"
Go to "system" -> "app". Copy "superuser.apk" to somewhere else in your computer (and remember where it is)
Go to "system" -> "xbin". Copy "su" to somewhere else in your computer (and remember where it is)
==========================================
(2) Go to Smartdevice website and download the latest firmware - HERE
Extract it with WinZip or similar zip utility - you should see the same files and folders of (1)
Copy "superuser.apk" and paste it into the "system/app" folder of this unzipped new firmware
Copy "su" and paste it into the "system/xbin" folder of this unzipped new firmware, replacing the original "su" file
[OPTIONAL]
(a) If you want to remove any apps in the original firmware, you can rename them from "xxx.apk" to "xxx.apk.bak" (eg. I don't use Weather sync app (IndroidWeather.apk), Sleep app (SleepAnalysis.apk) and Health app (SmartQWatchHeath.apk)), before the following step
(b) You can also add your own apps into the system/app folder, so that you don't need to install them after updating to the new firmware
==========================================
(3) Open WinZip or similar zip utility and navigate to the folder that contains the unzipped firmware files and folders. Highlight all the files and folders ("META-INF", "system", "boot.img", "mbr-xboot.bin", "recovery.img"), and use your zip utility to compress them back into a ZIP file called "update.zip"
==========================================
(4) BEFORE FLASHING THIS MODIFIED FIRMWARE, you must follow geek78's steps:
[HOW-TO]
1-Flash the watch with the restore tool from https://hotfile.com/dl/255788947/abfedd9/z1_restore_tool.zip.html (yes, i know, it will format the watch and you will loose everything... but it is needed)
2-Copy the rooted firmware called "update.zip" to the root of the /Sdcard of your watch
3-Start the flash from the watch
4-After the boot you can delete the 2 chinese apps with App Uninstaller
Click to expand...
Click to collapse
*** YOUR MUST USE THE RESTORE TOOL TO CLEAN THE WATCH BEFORE FLASHING THE ROOTED VERSION OF A NEW FIRMWARE ***
Thanks bro I already knew this but just wanted to thank you for your time and effort writing these instructions for everyone
Sent from my SPH-L900 using xda app-developers app
help with restore tool
Hello I have been searching through the forums and got a little help but need more. I am having problems rooting my watch. I dl'd the restore tool, problem is one of the restore tools instructions was to install the driver in a custom path but my comp keeps auto dling the driver and I cant choose the path to install. I run the restore tool and try to boot into restore mode so the tool will recognize it but it wont do anything. What am I doing wrong and do you guys have any solutions for the install path and getting into restore so I can use the tool? Thanks in advance for your time.
techgeek191 said:
Hello I have been searching through the forums and got a little help but need more. I am having problems rooting my watch. I dl'd the restore tool, problem is one of the restore tools instructions was to install the driver in a custom path but my comp keeps auto dling the driver and I cant choose the path to install. I run the restore tool and try to boot into restore mode so the tool will recognize it but it wont do anything. What am I doing wrong and do you guys have any solutions for the install path and getting into restore so I can use the tool? Thanks in advance for your time.
Click to expand...
Click to collapse
Try finding the watch in Device Manager and updating the driver manually. The driver is in this folder on Win7 x64: C:\Program Files (x86)\Smartdevices\Z1 Burn Tool\driver\x64
jatkins09 said:
Try finding the watch in Device Manager and updating the driver manually. The driver is in this folder on Win7 x64: C:\Program Files (x86)\Smartdevices\Z1 Burn Tool\driver\x64
Click to expand...
Click to collapse
Thanks for your help I tried that and it didn't work sadly. I will just have to try another comp. I have tried going to restore mode with the watch off and with it on .Do you happen to know if i did a factory restore from the watch and then used the rooted 2.2 rom from geek78 if that would work or do i absolutely have to use the restore tool to wipe first?
techgeek191 said:
Thanks for your help I tried that and it didn't work sadly. I will just have to try another comp. I have tried going to restore mode with the watch off and with it on .Do you happen to know if i did a factory restore from the watch and then used the rooted 2.2 rom from geek78 if that would work or do i absolutely have to use the restore tool to wipe first?
Click to expand...
Click to collapse
Yes according to geek78, you must use the restore tool everytime you are installing a customized firmware. I guess the reason is that the restore tool wipes everything on the watch, allowing a clean new install.
I had no problem with installing the restore tool. When I uninstall and reinstall the tool, it remembers where the driver was, therefore I could not reproduce your problem. The best way is to try to install it on another computer eg. XP or Win7 32 bit (I heard that the 64 bit gives most problem with drivers).
If this fails, you can try (I have not tested and won't test because it is a hassle to reinstall all the apps!) to wipe the watch in recovery mode (which is really a modified CWM):
(1) You have to trick the watch to reboot into recovery first -
Find ANY file and make a zip from it called "update.zip"
You should test and see if this method works first, therefore download an official firmware from HERE - rename this file "update1.zip" (or anything other that "update.zip").
Connect your watch to your PC and transfer both files to the root of the watch.
On your watch: "About" -> "Firmware upgrade". Upgrade will fail and the watch will reboot in recovery mode.
(2) If you are familiar with CWM, you should know how to wipe user data, cache, dalvik and system. If not:
Use lower button to navigate (you can only go down, but it will circle back to the top) and upper button to execute.
Go to each of these and follow instruction to execute (choose "++++++++++ Go Back ++++++++++" to previous menu for the next item)
"Wipe data/factory reset"
"Wipe cache partition"
"Advanced" -> "Wipe dalvik cache"
"Mounts and storage" -> "format /system"
Then go back to main menu and choose "Apply update from nand" -> "choose zip from nand" -> choose "update1.zip" (or whatever name you gave to the firmware)
OPTION: you can wipe cache and dalvik again after installation (recommended by many modders)
"Reboot system now"
If update of the original firmware is successful, this means you passed the test. Now you can repeat the process using the rooted and modified firmware as "update1.zip".
THERE IS NO GUARANTEE THIS METHOD WILL WORK, but I think it should.
Got it
Ok i finally got it. The 32 bit was the key. Thanks so much for the help. Loving it, gonna root 2.3 and install.
Recovery mode tested and working :good:
Did follow your instructons could not go back after mounts and storage step. With re-boot watch seems to brick. HELP!
Ton.dewaal said:
Did follow your instructons could not go back after mounts and storage step. With re-boot watch seems to brick. HELP!
Click to expand...
Click to collapse
What is happening after you format? Is the "go back" option not available? Or is it there, but the buttons no longer navigate?
Sent from my HTC One using Tapatalk
"go back" option was available brougth me back to Mount & Strorage. Have ttried restore tool on two window machines (7 & 8) tool won't find watch. I'm bricked!
Ton.dewaal said:
"go back" option was available brougth me back to Mount & Strorage. Have ttried restore tool on two window machines (7 & 8) tool won't find watch. I'm bricked!
Click to expand...
Click to collapse
The restore tool has issues with most 64bit machines. If you don't have one, you're best bet is to find a friend or family member that has a running XP system. OR, do you know how to create a dual boot on a pc?
Sent from my HTC One using Tapatalk
Thanks for advise, have now 32 bit XP avaialble. Will test this evening Central Europe Time. Fingers Crossed
Installed on 32 bit XP machine restore tool 1.0.0 windows restart: no luck. Tried to install Usb_Boot_Driver.sys but get Installed failed (unsigned) message. Any advise?
Ton.dewaal said:
Installed on 32 bit XP machine restore tool 1.0.0 windows restart: no luck. Tried to install Usb_Boot_Driver.sys but get Installed failed (unsigned) message. Any advise?
Click to expand...
Click to collapse
That doesn't sound correct...send me a PM...I will give you the login info to my FTP. I have the latest release of the burn tool in exe format on there...you need to download that.
Sent from my HTC One using Tapatalk
I can't root the watch
I tried this method several times but didn't work. after I flashed modified room the watch start OK and I can see superUser icon although the watch still not rooted, because I can't connect using: adb shell su or adb shell root.
I used a v3.5 firmware, please help me someone knows other method to root the z1 watch?
thanks in advance
morbid01 said:
I tried this method several times but didn't work. after I flashed modified room the watch start OK and I can see superUser icon although the watch still not rooted, because I can't connect using: adb shell su or adb shell root.
I used a v3.5 firmware, please help me someone knows other method to root the z1 watch?
thanks in advance
Click to expand...
Click to collapse
Download Maja's DJDroid 6.0 rom (v3.5) , its rooted already
Bad links
Can somebody post those Superuser.apk and su binaries? The download link to geek's rom is bogus and is forcing me to download a bunch of junk.
I have the latest Kitkat firmware (3.7) and stock ROM already has su binary thru adb. My question is can I replace those files thru adb without packaging a zip?
Thanks,
Hi!
Does anyone know how to add the remote camera function in 3.7 ROM? The latest ROM that had it appears to be 3.1. I could not find it as an APK, so I think it is somehow else embedded in the ROM.
Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool
Update
Resize Apps Partition
WARNING! This can BRICK your phone if done incorrectly.
PLEASE FOLLOW ALL STEPS CORRECTLY.
Please make a backup of all your important stuff.
Make a backup in the recovery.Make 100% sure the backup completes without any errors
Reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select Backup and Restore
2.Select Backup and Confirm(Proceed)
Once the backup is complete,the backup is located in "clockworkmod" folder on SD Card
You have to factory reset device,so be prepared to reinstall apps/games (You are going to lose data)
If you are fine with all of the above,The following mod increases the App Partition size from 1GB to 2GB.It rewrites the Internal Storage to 513MB(Used for videos/pictures,which is fine since we use our Micro SD cards for that)
If you are happy with all of the above,you can proceed with the next step :
Firstly,Download all files required and copy to SD Card
2 GB for apps_Jellybean_4.zip (232.63 KB)
Mega Link - http://goo.gl/ao3NFO
or
Media Fire Link - http://goo.gl/3j9RWm
AND
MTK_Nvram_Tool.zip (2.9MB)
Mega Link - http://goo.gl/Z2Chpx
or
Media Fire Link - http://goo.gl/sjah8X
Once on SD Card,reboot into recovery mode (Hold the Up button and press power button to turn device on)
1.Select "Install Zip"
2.Select "Choose zip Sdcard"
3.Choose "MTK_Nvram_Tool.zip"
4.Select "Yes - Install MTK_Nvram_Tool.zip"
5.Click Next
6.Select "I Agree with this Terms and Conditions" and click Next
7.Click Next again
9.Choose 'Nvram Backup"
Once its done it should say "Backup Completed"
Under that it should say "Nvram Backup Successfully Completed"
It give the location for that backup,always keep that file (Copy to the PC Later)
10.Click OK
11.Click Exit
12.Click Yes
Now you are back at the install update from zip file screen.
13.Select "Install Zip"
14.Select "Choose zip Sdcard"
15.Choose "2 GB for apps_Jellybean_4.zip"
16.Select "Yes - Install 2 GB for apps_Jellybean_4.zip"
17.Go back to main menu
18.Choose Wipe menu
19.Choose Wipe Data (Factory Reset) -THIS WILL ERASE YOUR DATA
20.Wipe Cache
21.Wipe Dalvik Cache
22.Go back to main menu and reboot phone
The phone should reboot.If you get a message saying you have to format phone storage,click yes to format.
Go to Settings,Storage and See Total space is now 1.97GB
If the phone wont boot,power down,then hold up key and turn on to get into recovery mode.
1.Select Backup and Restore
2.Select Restore and Confirm(Proceed)
Restore the backup you made earlier.
This should let the system load when you reboot again,even if it asks you to format the phone again.
Copy NVRAM Backup to PC for safe keeping.
If you want to return to original/stock
Follow the same procedure as above but use the following file instead of the 2GB File
Stock Partition_Jellybean_4.zip (232.63KB)
Mega Link - http://goo.gl/pMn0ea
or
Media Fire - http://goo.gl/KJfRF7
Credits to :
AnoopKumar - MTK Nvram Tool
Andalitez said:
Hi Guys
Just an update.I downloaded the update from the website again,used winRAR and replaced the modem file in the system.
Everything works great now
Click to expand...
Click to collapse
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too
Replied
BlaqueDroid said:
Hey man can u yplease hook me up with the modem file im kida stuck with unkown baseband too
Click to expand...
Click to collapse
Hey man.
Sent you a PM.Currently working on a rom,will only be able to upload it for you in afew hours
ZTE
ztedevices.com/search.html?keyword=blade l2 look on there for the firmware for your device , push via adb sideloading and you should be set
noob problem...
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...
No Sim Detected
eochi18jhae said:
guys, can you please help me...I also have the same problem when I flashed the kitkat rom...my blade l2 now can't read my simcard...what should I do?...
Click to expand...
Click to collapse
Okay,you have to download the firmware version for your country,and have custom recovery installed on the phone.
So if you in UK,download the rom for your phone from UK provider.(doesnt matter if its JB or KK)
http://www.ztedevices.com/support/index.html
Once you have the rom,Use winRAR to do the following:
1.open the rom from your country in winrar so you can see the contents.
2.Open system folder (dont extract,just navigate into the folders in winrar)
3.Open "etc" folder
4.Open Firmware folder
5.Select "modem_1_wg_n.img" and extract it(i just drag and drop on desktop)
6.Open the Kitkat firmware you've downloaded using winRAR
7.Open System folder
8.Open "etc" folder
9.Open Firmware folder
10. Copy the "modem_1_wg_n.img" into that location(drag and drop from desktop)
11.winRAR asks if you want to :Add/Replace file/s? Select Yes or OK to allow it to
12.copy entire firmware to phone and reflash it on the phone from the SD card
I dont know if you can just replace the modem file after having loaded the firmware.I didnt try or test it.it may or may not work.
I am working on Custom Firmware for this phone though.
latest achievement was i managed to get the phone to see the SD card as phone storage thanks to various xda guides.this will be built in
FIrmware should be ready in a few days after testing.if anybody is interested in trying it out,let me know
problem solved...
Thank you sir...problem solved...it's really hard to be a noob...have to understand a lot of things now....I'm willing to try your firmware on my phone...upload it when done...keep up the good work...sorry for my english...
Post has been updated
I need to talk to you.... Go read my PM
installation is always aborted.. PLEASE HELP
Replied
Thanks
The thread is so useful... Keep up the good work, I don't have patience to try the new ROM!
Is there any chance for kernel supporting overclocking and undervoltage, also with more Gvernor and I/O Sheduler options?
Also Would be gorgeous if there's tap screen to wake option, this would need custom kernel too...
I'm now using DeviRSilva's kernel, which is doing great! Man, don't be afraid to relese it and continue tweaks
Still I'm a noob and maybe half of theese wishes are impossible, but would be so cool if they're possible to develop!
PD: I saw a site promoting Lollipop ROM for our L2 is that real?
PD2: Sorry for my awful English and probably stupid requests and questions...
helpppp
I have probelm, phone do not show sim card, on official site there is no serbia rom please how to fix it?
Andalitez said:
Replied
Click to expand...
Click to collapse
It fails to flash the ROM with the updated radio file. Just stops at Can't open... file.zip '(bad)'. Installation aborted.
How to fix?
Hi how do i unroot the zte blade l2?
And how to I remove costum recovery and reinstall stock recovery and stock rom?
Thanks just asking in case of sending it back for repairing.
Just noticed that the download link has been remoded.
Can someone provide a link for this rom?
Thanks.
Does this ROM have Greek language installed ???
no links are working
I need a copy of carliv recovery and backup of stock recovery as u think although my mobile mainly working I think the recovery is corrupt and has screwed my sound thanks in advance as I am taking a giant leap and biting bullet to try this recovery hope it can flash the legit kit kat if ever released by zte or virgin UK thanks
Andalitez said:
Android Kitkat based ROM for the ZTE Blade L2
SwitchBL2de
ROM Features:
PreRooted
Apex Launcher
Debloated
Micro SD switched with Phone Storage
Zipalligned
ZRAM
build.prop Tweaks for the following :
Video and Photo Quality
Internet Connection Speed/Quality
Network Performance
Download Link:
Removed - Recompiling Rom, My sincerest apologies to DeviRSilva.
I used an earlier version of his kernel for the build - http://forum.xda-developers.com/android/development/kernel-devir-blade-l216-11-2014-t2945103
MD5 : a719cb770585f24c891fe47da9e56245
Note - Updated hosts file for ad blocking (Use xposed module "hosts Enabler" to prevent adverts)
Once Rom is installed and you restart phone from recovery
It may give the following warning "Root access possibly lost. Fix? THIS CAN NOT BE UNDONE"
Select "Yes - Fix root (/system/xbin/su)"
Credits to BSDgeek_Jake for the hosts file (http://forum.xda-developers.com/showthread.php?t=1916098)
*****************************************************************************************************************************************
Custom Recovery
Please have a read through the information in this link : http://www.howtogeek.com/193055/what-is-a-custom-recovery-on-android-and-why-would-i-want-one/
Flashing a custom recovery on the L2 is a simple process.
Things Required for this process:
Rooted Phone - (Please see the post on Rooting)
Mobile Uncle Tools APK
Recovery Image
First you have to allow the phone to install apps that dont come from Google Play Store.To do so,follow the guide :
1.Settings Menu
2.Security
3.Enable(tick) Unknown sources
4.Untick Verify apps
You can always reset these back to how you found them when you are done.
Download Mobile Uncle Tools
Mega Link: http://goo.gl/IkyVDo
or
MediaFire Link : http://goo.gl/c5q6Jh
Copy APK file to your SD card,use your file manager to install it.
Run Mobile uncle tools,allow root permissions when menu pops up.
You can close the app for now.Next thing we need is the actual recovery file itself.I've attached the recovery i find works best
Carliv Touch Recovery v2.2 - MTK CWM-based v 6.0.4.4
Download Recovery.img file
Mega Link: http://goo.gl/1f8OwX
or
MediaFire Link :http://goo.gl/U1D2Zu
MD5 :9f770b95df8e1beabd7417fc112190bc
Once the file has downloaded,copy to the root of your SD Card.
Open Mobile Uncle Tools and Select "Recovery Update".
Be sure to Select the downloaded recovery image,not anything else.
Select the file and proceed with installation.Mobile uncle tools will then prompt you to reboot into recovery if the update was successful.Select Yes and the phone will reboot into the new recovery menu
Credits to :
eddy.rugal - Base Rom
Carliv - For Recovery
njava - For Mobileuncle MTK Tool
Click to expand...
Click to collapse
any news on the kitkat rom yet? super excited to try this out!
is the link for the rom gone?
i dont see it
Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app.
Beta 1:
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Beta 1 Mirror: https://klisza1993.synology.me:1000.../J4ukGm08evreR1dYWbOQxngvuPTbTvJh-qb4gj3eTDgk
Beta 1 Mirror:
Note 20 Ultra One UI 4 Beta - Google Drive
drive.google.com
Checksum to verify corrupt downloads:
MD5 : 54db93183aa24ecdfaa7134891022094
Beta 2 Update: http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/698c78dfebf8472d9e1691413b9af2f2.bin?px-time=61ed489c&px-hash=5f86741823355625dacb429abc4ff6cf&px-wid=3281729-WSA211124122250&px-wctime=2021-11-24 12:22:50&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Prerequisite to flash beta on N20U (N986B) thanks to
dr.ketan
You need to be on November Security patch before moving ahead.
Dial *#1234#
If your info is ditto same as said below then only you can flash beta 1 for N986B
AP : N986BXXS3DUJ6
CSC : N986BOXM3DUH5
CP : N986BXXS3DUIF
Also if your device is rooted/modified, it will fail. (unlocked bootloader isn't issue but firmware must be complete stock)
TLDR instructions, thanks to pernodpepper
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Detailed instructions along with multiple methods to install. Thanks to Evil_Smiley_za and @AhmedMomen
UPDATE:
-This thread will be for sharing tips and help and update.zip/.bin files (when/if available) for the OneUI 4.0 Android 12 Beta for the Galaxy Note 20 series (Unlocked/Exynos)
Installation Methods:
ADB-method:
1. Download SDK platform tools https://developer.android.com/studio/releases/platform-tools
2. Extract the file in your desktop.
3. Inside the extracted folder put the update.zip file
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown your phone and connect it to the pc
6. Holding Power and volume+ and enter into recovery mode.
7. Select "update via ADB". (scroll down using the volume buttons and select using the power button).
8. Connect the phone to a PC using an original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options on your pc you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Connect any USB device to your device, AKG earphones could work, then press Power and volume+ buttons to get into recovery mode.
5. Using your volume keys navigate to "update via sdcard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes installing. It will take some time.
8. Phone will reboot by itself and load android.
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
There are two methods that you can use to get into recovery mode
Method 1:
1. Connect your phone to your PC (Make sure USB debugging is on).
2. Using ADB, enter the command ./adb reboot recovery
3. Wait a little and you should be in recovery mode.
Method 2:
1. Power off your device
2. Connect your device to a PC or use the AKG earphones.
3. Hold down Power+VolumeUp buttons and keep pressing them until you enter recovery mode.
This will not trip knox if done by the methods above
Don't install a beta unless you are fully aware what you are going into.
Don't install the beta if you want your phone to be stable, IT'S a BETA.
It's recommended to make a backup of your data before updating to the Android 12 Beta.
Important Notes:
-Rename the .bin file to update.zip in order to be able to flash it from recovery.
-A common mistake done by some people is that they see the file named update while its a WinRAR.zip file already, then they add another .zip making the name of the file update.zip.zip which will not be flashed successfully, So make sure you do it right.
-Updating to the beta is AT YOUR RISK, No one is responsible if anything goes wrong.
You will not receive OTAs again UNTIL you are on a firmware that gets released later for your original CSC, thats most likely not happening before the BETA is over.
Note: AngryPixel89 is my reddit alias.
is it OXM?
antisocialbratt said:
Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app. its a 2.5gb update. Use it at your own risk and please ask other senior members if you have doubts. I just followed instructions someone else shared to grab that link for you guys.
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
OXM
Click to expand...
Click to collapse
Yes. It is INS OXM
antisocialbratt said:
Yes. It is INS OXM
Click to expand...
Click to collapse
Awesome
Can someone share the installation process please
Most probably you will have to flash it using Odin but I wouldn't guarantee that. Wait for some time till some modders here figure out a way.
waseem.gani said:
Can someone share the installation process please
Click to expand...
Click to collapse
First make sure you are on November patch
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Maybe this help
Just rename it to update.zip and intall from recovery mode (i was in the latest build with november security patch)
works fine, thank you for the upload.
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Inxteros said:
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Click to expand...
Click to collapse
November
Does reguset full wipe or is not needed ?
My bad I was not able to flash it via recovery,any help would be appreciated. I am on October patch.
pernodpepper said:
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file in internal storage
4. Go to recovery (No odin/download mode required)
5. Flash update.zip
6. Profit
Click to expand...
Click to collapse
I can't see internl storge in the recovery
B.Gaboo said:
(i was in the latest build with november security patch)
You was on DUJ6/DUH5/DUIF?
Click to expand...
Click to collapse
N986BXXS3DUJ6
and installed from the external storage
waseem.gani said:
I can't see internl storge in the recovery
Click to expand...
Click to collapse
You need to use an sdcard and place the zip there
By any chance do you have Update.zip file for SM-G986B??
Rapier said:
You need to use an sdcard and place the zip there
Click to expand...
Click to collapse
Tried that as well, but don't know what the issue is
Amittey said:
By any chance do you have Update.zip file for SM-G986B??
Click to expand...
Click to collapse
This tread is for the SM-N986B. The note 20 Ultra only....