How do I get into magldr again?
If I hold volume down and power on button, it goes to screen with 4 colors.
What do I do then? Already got all the addons such as hspl installed.
Hi, just hold the power button longer, also magdlr is shown on the device.
the_hd2_cracker said:
Hi, just hold the power button longer, also magdlr is shown on the device.
Click to expand...
Click to collapse
Did that, and nothing.
I do see magldr when starting it up normally though. It boots an old rom that I don't want.
Anyone at all?
So when the phone powers up, you're holding the power button, and the menu still doesn't show up? Well then, reinstall MAGLDR though the tri color screen then, it won't wipe your current android data, dun worry. Or you can task 29, install MAGLDR, then reinstall your android build.
Switch the phone on and keep holding the power button in until you get to the menu.
Kailkti said:
So when the phone powers up, you're holding the power button, and the menu still doesn't show up? Well then, reinstall MAGLDR though the tri color screen then, it won't wipe your current android data, dun worry. Or you can task 29, install MAGLDR, then reinstall your android build.
Click to expand...
Click to collapse
It does kinda show up though, for 3 seconds and then it will say go go go!
it's booting up a old rom though.
ClydeB1 said:
Switch the phone on and keep holding the power button in until you get to the menu.
Click to expand...
Click to collapse
This worked! thank you sir.
If you hold volume down and power on button you will enter bootloder (spl 2.08 )
If you switch off your device and switch it back on AND NOT LET GO OF THE POWER BUTTON, you will inter magldr menu.
You need to keep the power button pressed in until it boots into the menu, don't let it go until you see the menu options.
Edit: Ok, see you got it working.
Lawl that's hilarious. xD
I'm sorry, just found this funny. xD
Related
after flash andriod rom use maglrd 1.11 , i cant boot in to tri color bootloader , i try hold down vol button and power button but alway boot in to maglrd , please help , i need find out how to boot in to bootloader ?
Power off your device and hold "Volume Down" and Power on the device till u get the tricolour screen.
i try that but just boot in to maglrd not bootloader
I've tested it yet and it works for me!??
- Shut down ur device
- press the volume down button (hold down all the time)
- short tap on the power button and release it (still holding volume down)
still the same boot in to maglrd
I think you're holding the power button too long.
Hold down the volume down and press the Power On and release it while still
holding the volume down.
Works for me.
i just tap the power button
same here
I got the same problem I was going to flash a new radio and start over with MAGLDR with a new nand because the call key isn't working since i started using namd versions, last night i spent like two hours trying to get my phone in Bootloader Mode with no luck
hope some one can help
Vol down and power. odds are your not holding it right. If it dont work, then your stuck with Magldr.
Why are you even holding the power button?
To get to the RGB Bootloader:
Turn off Device
Hold Volume Down Button
Turn on Device - DO NOT HOLD the POWER BUTTON
LiFE1688 said:
Why are you even holding the power button?
To get to the RGB Bootloader:
Turn off Device
Hold Volume Down Button
Turn on Device - DO NOT HOLD the POWER BUTTON
Click to expand...
Click to collapse
That doesn't work for me and i can't have a hard reset neither.
I always go back to android.
I just can change nandroid with magldr 1.10 : i can't come back to winmo : android works well but I need some winmo programs.
You sure you doing it right?
You release the power button when the HD2 vibrates but you still hold on to the Volume Down button.
I play with this HD2 all the time, switching from WinMO6.5 to Android SD, and Android NAND, as well as Clockwork Recovery NAND.
If I want SPL3.03, I go into Recovery Mode with leoimg.nbh file.
When I want to go back to Android, I do recovery back to 1.66 to recover back to SPL 1.42 so I can flash back HSPL 2.08
Have not met an issue yet.
Yes i just tap the power button and still just go to magldr
yongh said:
Yes i just tap the power button and still just go to magldr
Click to expand...
Click to collapse
Do you even have HSPL installed???
Yes other why i cant flash to andriod la
Research more stuff
MAGLDR is not boot loader
Bootloader = phone off, volume down + power button
MAGLDR - Phone will be off + hit power - it will turn on in MAGDLR
P.S. If installed correctly
can someone please help me,i installed maglrd 1.11 for install android, when
restart its come up to htc logo in white screen only i can go in to bootloader but nothing i can do,i installed hspl, i dont know wht to do now.
perhaps your volumedown button does'nt work properly.
Take the back off the phone,
take the battery out,
wait for a few seconds,
put the battery back into the phone,
leave the back off the phone, so that you can feel better that you press the volume down button correctly
press power button only once and very briefly
this should work, I had the same problem
Hello everyone, I tried installing Android nand, the newest but after installing maglrd it gets stuck on the loading screen.
I checked the sticky for solutions.
[qoute]Problem: On some devices MAGLDR won't boot at all (HTC logo stay after turn on).
Solution: Install HSPL208.
[/qoute]
But how can you install HSPL208 if I cannot enter my phone at all?
Enter bootloader mode to flash HSPL. Turn the phone off, hold down volume down button and briefly press the power button. Keep holding the volume down button till you get the 3 colour screen. It should say "serial" at the bottom. Connect it your PC via USB and it should turn to "USB". You can then flash HSPL.
johncmolyneux said:
Enter bootloader mode to flash HSPL. Turn the phone off, hold down volume down button and briefly press the power button. Keep holding the volume down button till you get the 3 colour screen. It should say "serial" at the bottom. Connect it your PC via USB and it should turn to "USB". You can then flash HSPL.
Click to expand...
Click to collapse
Thanks to you sir, I almost lost it for a second.
Though this may be a noob question, how do you get into bootloader again?
Google failed for me.
carazy1 said:
Thanks to you sir, I almost lost it for a second.
Though this may be a noob question, how do you get into bootloader again?
Google failed for me.
Click to expand...
Click to collapse
I gave instructions on how to do that
johncmolyneux said:
Turn the phone off, hold down volume down button and briefly press the power button. Keep holding the volume down button till you get the 3 colour screen. It should say "serial" at the bottom. Connect it your PC via USB and it should turn to "USB". You can then flash HSPL.
Click to expand...
Click to collapse
johncmolyneux said:
I gave instructions on how to do that
Click to expand...
Click to collapse
Oh.... and its saying CotullaSPL when Im there. Is that wrong?
No that's fine. That's the HSPL bootloader. When you've got that screen you can flash a ROM via USB. (There's another way to do it, if that doesn't work.)
johncmolyneux said:
No that's fine. That's the HSPL bootloader. When you've got that screen you can flash a ROM via USB. (There's another way to do it, if that doesn't work.)
Click to expand...
Click to collapse
So all I have to do now is install Android, right?
carazy1 said:
So all I have to do now is install Android, right?
Click to expand...
Click to collapse
Sorry - my bad. Once you've got HSPL working you should be able to install Magldr and then flash an Android ROM from there.
Flash Magldr at the bootloader, like you did for HSPL, then when it's done turn the phone off and turn it on again, but hold down the power button till you get the Magldr menu.
Hello!
I'm having a problem during the installation of the clockwork recovery, tbh its one of the first steps but here we go
atm Im using MDJ's CyanogenMod 7 v. 2.6 and I would like to install the recovery but to do this I need to reach magldr which is not accessible due to the fact that I can't do anything except looking how my android autoboots ;/
every time I turn off the phone and hold the power button, it just boots to my android. I see magldr starting and booting my system, counting 123456, then gogogo but I cant do anything
help me
You need to keep that button pressed until you're really in the menu, you're probably releasing it too soon?
Are you keeping the power button down all the way thru the boot process, if you're not, keep holding it from power down til it reboots and keep holding it until it should switch to the mgldr options menu.
Sent from my HTC HD2 using XDA App
StephanV said:
You need to keep that button pressed until you're really in the menu, you're probably releasing it too soon?
Click to expand...
Click to collapse
oh my god, that was so easy
works
thank you very much!
once you get used to it, you'll find you only need to hold power from just at the end of the first bootscreen until the menu appears, about 4/5 seconds. Not all the way from power on, about 15 seconds.
Hi, I'm trying to flash WP7 on my tmobile HD2. I had HSPL3, the 2.15 ver radio. After installing MAGLDR 1.2, when I boot up holding the power button down, the phone automatically boots android from SD. (I had it on my SD card before but didn't think it would be a problem).
Anyone know how to fix this?
It just says Booting Android from SD,
Android load etc
load z image,,
stops at GO GO GO! then just hangs. Hope I didn't screw up.. thought I was following the directions carefully.
You mean magldr 1.12?
"services"-->"Bootsettings"-->"Boot source"
Figured it out. Wasn't holding the power button down early enough. Thanks!
akollgaard said:
Figured it out. Wasn't holding the power button down early enough. Thanks!
Click to expand...
Click to collapse
Easier to enter the boot menu, is to hold the power button to startup your phone and hold the button until the menu appears ^^
Hi guys, I have searched and searched and searched but cannot get anything I've tried...
Essentially, I got an HD2 today, flashed HyperDroid and all was good, until I wanted to access CWM via the mgldr menu, I tried to access it but it just would not work. Holding the power button would just boot the phone, it displays some text that I cannot remember then '1234 GO GO GO!'
So instead I tried to boot into CWM from ROM Manager, but that didn't work either, it just booted the phone as usual.
So I did a task29, started all over again, flashed a different ROM and the same thing..
I really am lost, any help would be much appreciated.
no offence intended here
Task 29 wipes the phone,
put phone in bootloader, turn on holding volume down,
install magdlr, then the phone will only boot to magdlr, make sure you have appropriate radio to boot.
you should now only have Magdlr on the phone and nothing will boot and you can go through the process of installing cwm to get a android build up and running.
to access magdlr when you have a build be it android or wp7, turn the phone on when it vibrates press the power button and keep holding it down until the magdlr screen appears
Demon_man said:
to access magdlr when you have a build be it android or wp7, turn the phone on when it vibrates press the power button and keep holding it down until the magdlr screen appears
Click to expand...
Click to collapse
None taken, I guess I misread the instructions on all the other threads, I thought you just had to hold power until it booted into mgldr, not press it, release, then press again. Thanks mate!
Jake254 said:
None taken, I guess I misread the instructions on all the other threads, I thought you just had to hold power until it booted into mgldr, not press it, release, then press again. Thanks mate!
Click to expand...
Click to collapse
its just the way ive always got into magdlr but np hopefully u get sorted.