my device stocked while loading magldr in the white htc screen...
nothing works now -.- ... think i had the wrong hspl
what should i do know? pressing off-button and voice-down do not work.
hardreset doesn´t work too ...
anyone an idea ?
turn off device, hold vol down then push power button, keep holding vol down, RBG screen shound pop up, then plug in usb and install new hspl/radio/magldr/ROM
Related
Hi,
I just got a used T-Mobile HD2. Tried to power it on by following methods, but none of them works:
1. Press "power" button; no reaction;
2. Press "vol up + vol dn" and "power" button, no reaction;
3. Reset using the yellow button underneath the battery and re-power, no reaction;
4. Charging it using wall charger, the phone start to vibrate periodically and the screen start to flash with "stick together" page, but the charging led light is still OFF.
Is this a hardware problem? Anything else I could try ? Thanks.
With the charger plugged in and on, try the vol up and down together and press both and power button, hold down till the 4 colour screen comes on then flash a new raido and then a new rom, use a 50 radio
It could be hardware only time will tell
Phone is super slow and the sound is messed up. I want to switch the phone back to original state with WM installed.
I cannot seem to get the phone back in tri color mode.
Power + Volume brings aMAGLDR V1.13
What am I doing wrong? Is there any other way to force the phone in tri color boot mode?
Thanks,
make sure phone is off then only press volume - button and then press power button.
it sounds like your waiting to long to hold the vol down and power button. you need to do that before the splash screen pops up, if the splash screen shows up its already to late. pull the battery out & then place it back in..hold power for just a split second and then press vol down. im not sure why but this seems to boot a little quicker for me doing it this way then holding power and vol down at the same time from the start.
Still no luck.
Remove the battery.
Press and hold "Vol down" key
Press Power for 2 sec.
Wait for 10 + sec. nothing happens.
Press and hold "Vol down" key
Press Power for 4 sec.
Wait for 10 + sec. nothing happens.
Press and hold "Vol down" key
Press Power for 8 sec.
Wait for 10 + sec. nothing happens.
Phone powers up.
"Stick Tgether"
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
Guy....just HOLD VolDown and press SHORT power button.
Are you sure your volume down button works?
It doesn't matter if you short press or long press the power button it works either way the main thing is the phone has to be completely off before first pressing and holding the volume down button and while it is still down press the power button and keep the volume down pressed until bootloader screen appears.
You can also try, with the phone off or on, press the volume down button and then press something into the reset button under the battery door quickly and keep holding the volume down button.
If none of these work let me know exactly what happens after you try these. Where does it go, does it start Android?
Sent from my HD2 using XDA App
It looks like the problem is the volume button.
I let the phone boot normally.
I noticed if I press the volume up button then the animation for vluome come up on the screen but if I press the volume down button animation does not appear.
Therefore, when I hold the volume down and press reset button, phone boots normally. I guess I am out of luck?
I am not sure how to bypass this problem but there have been others with your same problem search the other general forums for volume down button broken or something like that and I am sure there is some way to remap your buttons
Sent from my HD2 using XDA App
I don't think that you can remap it so it works on that early time on bootup.
baboog said:
Phone is super slow and the sound is messed up. I want to switch the phone back to original state with WM installed.
I cannot seem to get the phone back in tri color mode.
Power + Volume brings aMAGLDR V1.13
What am I doing wrong? Is there any other way to force the phone in tri color boot mode?
Thanks,
Click to expand...
Click to collapse
Try to hold down both UP + DOWN vol and then press POWER. Keep on holding it until you see the TRI color screen. This is a hard reset method, hope this works.
Just curious what ROM you currently running on the phone?
when in magldr can you scroll down? if so then the volume down works. magldr wont let you charge the phone in an off state so if you can scroll down. shut off phone or pull battery and wait like 15 seconds, than hold down the volume button than plug the phone in and you should be in tri-color screen if not than you need a new phone. hope this helps a little.
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
I don't think there should be a 'HTC' screen when you're booting into bootloader? I'm not sure, but just try holding down both the power button and the volume down button, as I think people have been able to restart the process after their phone has run out of battery or something similar. Hopefully everything should be OK once you've managed to access the bootloader.
Oh, and I don't mean to be rude, but use a better PC next time
phone wont go into bootloader , phone just turn on NORMALLY , but while there is no system at all on his memory he just stuck at HTC (green) on white background !
im suspecting that my VOLUME DOWN button is broken ?
Have you tried the back key?
power (end call) + back key ?
If you have magldr installed it should bring you to magldr menu which would point towards faulty vol down button ....
lummujaj said:
i own a hd2 EU version (end call and answer call are not colored with green and red , they're all white ) tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc now i cant get my hd2 into colored screen to start again from the 1st stem (mgdlr)
i tried
Step 2. Hold the Volume Down Button and press the End (red) key once.
but my phone turn on and stuck at htc logo ?
what else to try
Click to expand...
Click to collapse
If I remembered correctly, some of the people mentioned that HD2 is quite difficult to brick. I think that you could still try to work with your phone unless you still suspect that you have a faulty volume down button. I noticed in your statement in Step 2 coloured red that you press the end key once. I haven't flash in a while but I think you should hold the end key with the volume down button until you get into bootloader mode (screen with tri colour). Don't just press the key once. I hope this helps.
lummujaj said:
... tried to get android on my phone but the procesed stopet coze i got bluescreen on my pc ...
Click to expand...
Click to collapse
I am sorry, but I think you may have bricked your device.
Sure thing, the european HD2 is quite difficult to brick. But your PC had frozen while you were in the middle of flashing. (right?)
It is like pulling out the USB cable while flashing. You can try flashing from sdcard. Are you sure you are not able to go into bootloader?
To get to bootloader press and hold vol down button and then press the power (end call) button. I do a lot of flashing lol
lol...i just noticed the threadstarter's point of saying he pressed the power key "once". So i thought that was a mistake. Could be surely from the faulty volume button. Don't see any reply yet from him.
Hi!
I have an Htc Hd2 and years ago i saw the DFT Nand android, and i installed it... The HSPL, the aMAGLDR... I installed the android using the aMAGLDR usb flasher... Some months ago the screen had to be replaced, i did it myself and after that i decided to install the Windows Mobile 6.5, the original rom but... To install the WM6.5 i have to do volume down + power, to go to that color screen and when it says usb just run the rom.. the problem is that when i press volume down + power the color screen does not show, it just goes to the aMAGLDR.. I checked my volume rockers and they work fine...
And with the android rom installed i can not reinstall the HSPL.
please, help me.
just hold volume down and plug usb while holding it (or to charger) and bootloader should appear
hspl
gilbert32 said:
just hold volume down and plug usb while holding it (or to charger) and bootloader should appear
Click to expand...
Click to collapse
Hi, Gilbert32!
Thank you for your reply but unfortunately didn't help. That colorful screen still doesn't show up.
I don't know if it is related but, my screen had to be replaced, i did it myself and i can't get the colorful screen anymore since then...
My phone buttons are all working fine and the volume rockers are good too... I don't know what happened!
Any other sugestion would be welcomed.
and thank you.
and sorry for my english... I am from Portugal!
well, try holding volume down and just press power button, like if you'r going to lock the screen. only a simple press, no need to keep holding the power button
hspl
gilbert32 said:
well, try holding volume down and just press power button, like if you'r going to lock the screen. only a simple press, no need to keep holding the power button
Click to expand...
Click to collapse
Once again, thank you for your time!
I've tried that before and tried it now again and it just does the same thing.. it's like i don't press the volume down, it just loads the android rom... and if i hold the power button with the volume down it goes to the MAGLDR, where is the "usb flasher" and the other options..
whatever i do holding the volume down it's like i'm not holding it, it's like it doesn't work.. but in the rom itself i can up and down the volume and in the MAGLDR i can go up and down through the options with no problem.. so i guess there is no problem with my volume controller.
thank you!
Hi
I tried to flash ZUI 2.3 with QFIL. but some errors appeard. so i Stopped flashing and i rebooted my phone.
but now the screen is Black and the phone vibrate every 10-15 seconds.
when i Press and keep power Button. there is two kind of vibration. a quick vibration and a longer vibration. but nothing happening by holding power button.
i tried holding Power button & Vol Down nothing happened.
power button & vol Up , nothing happened.
power button & vol up & vol Down ... also nothing happening...
my PC does not recognize the phone ... so i cant use adb.
So I'm desperated . What should i do to fix this ?
You can refer to this post, save your cell phone.
http://bbs.lenovomobile.cn/zukedge/t678962/
my PC does not recognize the phone. i dont have any access to phone. i only see the black screen and periodic vibration