seus made an update. maybe ui update will come soon.
SEUS HAD UPDATED TO 2.11.2.9
motanu200 said:
seus made an update. maybe ui update will come soon.
Click to expand...
Click to collapse
Wich FW did you have?
Wich country..?
Sent from my X10i using XDA App
i had an update too yesterday
but i changed my build.prop file to have it
i put these No.
ro.product.name=X10i_1232-9897 and i had the update on X10
Don't update through seus
I flashed seus yesterday
The market disappears and a new app called SAM 4.0 replaces market
I think this is se app and it sucks
I wanna manually install market but failed
The build number is still 2.1.A.0.435
and some of the apps for hk version disappear
Nth other than apps changes
Anyway don't update
I believe the version should be 2.1.1.A It should already been rolled out in SEA and part of Europe today
unknown13x said:
I believe the version should be 2.1.1.A It should already been rolled out in SEA and part of Europe today
Click to expand...
Click to collapse
you think? who could confirm this?
but the build no. is still the same
and nth realli changes except the removal of market
now I m realli frustrated cuz I can't install market
-cleave original post-
Features of 2.1.1.A please?
Updated last night, not no root
Hi Guys,
I updated last night on 3 in the UK, I'm now running the following versions and was previously rooted with Z4Root, but this has now stopped...also the update claims (on Sony website) to add pinch zooming to web browsing and googlemaps, however it doesn't work at all well for me Also talks about improved performance, but phone seems a little slower if anything.
Interested if anyone else on 3 has updated and found similar?
Firmware Verions 2.1 - update1
Baseband Version 2.0.49
Kernel Version 2.6.29 ([email protected] #1)
Build Number 2.0.2.A.0.24
Also I can confirm my Android Market still works fine
EDIT: Just noticed the others mention a different build, think my update went wrong?
Many thanks
Dan
shockUK said:
Hi Guys,
I updated last night on 3 in the UK, I'm now running the following versions and was previously rooted with Z4Root, but this has now stopped...also the update claims (on Sony website) to add pinch zooming to web browsing and googlemaps, however it doesn't work at all well for me Also talks about improved performance, but phone seems a little slower if anything.
Interested if anyone else on 3 has updated and found similar?
Firmware Verions 2.1 - update1
Baseband Version 2.0.49
Kernel Version 2.6.29 ([email protected] #1)
Build Number 2.0.2.A.0.24
Also I can confirm my Android Market still works fine
Many thanks
Dan
Click to expand...
Click to collapse
The 3 update has only updated you to the first build of 2.1. The problem with many operators is they are very slow in adding thir 'tweaks' to the generic firmware so take ages before they finally release their branded version (ask those that are on AT&T!!!). To get the multitouch (and most recent) update the easiest way would be to flash with global generic (as it is still not released on uk generic).
Thanks for the info, I wonder if you could help me understand this a little better, when you say Flash to generic firmware, does this only update the component listed as Firmware in my version numbers or will this bring up the basebands and other versions?
Also when I read a lot of the forum messages and posts they all assume a certain amount of knowledge or rather background on either Android or on the device, which coming from an iPhone I'm not familiar with. I am however familiar with flashing old PDA's with baked ROM's and so forth, so not totally stupid (I hope) and I work in IT, but would appreciate not having to read pages and pages to get the simple facts Let's face it who likes to read the manuals anyway Any links or words of advice (polite please) would be much appreciated
Many thanks in advance.
Dan
See here
http://forum.xda-developers.com/showthread.php?t=928343
and
http://forum.xda-developers.com/showthread.php?t=908791
and others in this section.
Ghaith Alshareef said:
i had an update too yesterday
but i changed my build.prop file to have it
i put these No.
ro.product.name=X10i_1232-9897 and i had the update on X10
Click to expand...
Click to collapse
when i edit the build.prop ..the changes dont get saved
maybe problem with root explorer?
which version u using?
Hi.. If you'd rooted and installed the pinch zoom kernal then seus will think you need an upgrade. Follow the procedures some of others have suggested to get the latest fw.
Sent from my X10i using XDA App
Nocturnal - are you using the save and exit option? I made the mistake of not doing that before myself.
Sent from my X10i using XDA App
im_iceman said:
Nocturnal - are you using the save and exit option? I made the mistake of not doing that before myself.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
there is no save and exit option..i just press the back key after editing the numbers...and it doesnt get saved.
pls help.
Nocturnal310 said:
there is no save and exit option..i just press the back key after editing the numbers...and it doesnt get saved.
pls help.
Click to expand...
Click to collapse
are you sure you have set the read write permissions (mount R/W) it will say mounted as R/W and used the text editor dont press back press menu then save in the menu that pops up remember to set the permissions back to read only press the MOUNT button again and it will say mounted as R/O
Can u Explain clear How to change and what steps need to be do for updating....
kmaximax said:
are you sure you have set the read write permissions (mount R/W) it will say mounted as R/W and used the text editor dont press back press menu then save in the menu that pops up remember to set the permissions back to read only press the MOUNT button again and it will say mounted as R/O
Click to expand...
Click to collapse
thanks
i got a new version and it has save changes option
so will editing build.prop allow me to cheat and get update?
Related
I just got a Rogers SE X10 and I noticed a few problems
1) Call Volume low
2) Lag when using dialpad
3) Screen kinda unresponsive
I know these are known problems but my question is if I root it, what problems will it fix? And what other advantages will rooting give?
Thanks!
Rooting wont fix any of the problems, but updating to the latest firmware may sort out a few issues.
As it shows Root means accessing roots of your phone (software wise) and gives you the ability to change not all but some of the section of the software which SE has implemented into your phone. Ability to delete main file from your phone and add many files which can improve the usability of your phone.
But as Haveer said, you may want to move up and upgrade your firmware which will help with some of the issues you are experiencing.
Update Firmware as in? I tried the update option in my phone but it says I have the latest version. Is there any specific app that can fix these problems?
xGary said:
Update Firmware as in? I tried the update option in my phone but it says I have the latest version. Is there any specific app that can fix these problems?
Click to expand...
Click to collapse
You didn't tell us what version do you have. Go to settings/about phone and read the build number./ If you want SE to update it for you it will take sometimes to be available in your area. You may want to use the other thread about the builds.
XPERIA X10 Android Development>Decrypted x10 roms R2BA020 is the last one there but root will give you R2BA023. You need to learn how to flash it yourself. Read the instruction
Nimche said:
You didn't tell us what version do you have. Go to settings/about phone and read the build number./ If you want SE to update it for you it will take sometimes to be available in your area. You may want to use the other thread about the builds.
XPERIA X10 Android Development>Decrypted x10 roms R2BA020 is the last one there but root will give you R2BA023. You need to learn how to flash it yourself. Read the instruction
Click to expand...
Click to collapse
The Build Number is R1FA014 Sounds old to me.
xGary said:
The Build Number is R1FA014 Sounds old to me.
Click to expand...
Click to collapse
It is, first one out I think. I should have worded my post in your other thread differrently. There is no advantage at present time to rooting other than you can install the latest update 023. Which in turn gives you a more sensitive screen, better battery and faster in general and you can install apps that need root.
xGary said:
The Build Number is R1FA014 Sounds old to me.
Click to expand...
Click to collapse
And you haven't experienced any battery drainage?
One of the reason some people start coming to forums like here is because the manufacturer doesn't support their product as they should. So here we get ahead of them instantly. Thanks to our awesome developers. Good luck rooting, if you follow the steps right you won't have any issue. And also you can ask question in the right thread.
cheers,
Hey folks, let me start by saying that I have searched and read threads on this subject, but alas I just did not understand them.
So please, if somone wouldn't mind answering my questions with simple answers, I'd really appreciate it.
Firstly, a while back I 'rooted' my phone with the 'Exploid One Click .apk Root (Latest v.1.08 30 Aug. 2010)' method and all was well.
However I ran the update service on my pc recently (looking for 2.1 DOH!) and it gave me an update...which left my phone unrooted but with the latest 'RBA026' build number. I panicked and just did the exploid root method again and restored my phone with titanium backup.
So my first question is, is the firmware I have now unbranded/generic or does the root effect the firmware?
If it is not unbranded/generic, which is the easiest method to achieve this?
And, lastly if I have an unbranded/generic firmware..can I still get the 2.1 update with SEUS? (if not how would I get it)
I understand this will probably frustrate some people as all the information is probably already contained in the forum..but like I said I just couldn't get my head round it.
I'd really appreciate any help that anyone could give.
Regards
TD
EDIT: BTW this is the info on my 'About Phone' screen:
Model Number - x10i
Firmware Version - 1.6
Baseband Version - 1.1.31
Kernal Version - 2.6.29-rel [email protected] #2
Build Number - R2BA026
In the key lock screen, press the following button combination after pressing the power button to bring the screen on (don't unlock the phone though)
menu > back > back > menu > back > menu > menu > back
Post what you have in service info > model info screen
Sent from my X10i using Tapatalk
Thanks for the quick reply!
WOW ddn't even know I could do that...lol
The screen shows the following:
Model - x10i
Country - UK
Brand - Customized
Thats what I have and yes its generic. In theory our handsets will be one of the first to get the 2.1 update
We'll need to re-root obviously though.
Oh and updating through SEUS will work fine also!
Sent from my X10i using Tapatalk
That's brilliant mate, just what I wanted to hear..thanks very much for the help!!!
(if there was a rep/thanks button I'd have clicked it lol)
No problem. Hopefully 2.1 will come today
Sent from my X10i using Tapatalk
Yeah, Fingers crossed. I didn't think this would bother me all that much, but I've gotten swept up in all the excitement...lol
Since the topic is already here.. I just wanna know if my phone is branded or not (didn't find a SINGLE topic explaining what means what)
So:
Model: x10i
Country: Central Europe 3
Brand: Customized CE3
IMO that shouldn't be branded, should it?
Are you on R2BA026? I would expect that to be generic yes.
I debranded mine some time back, this is what mine is showing
(FW version is R2BA026 GENERIC)
Model: x10i
Country: Generic GLOBAL
Brand: Generic
Mine shows,
Country uk
Brand 3
Will I get update first like other uk ones?
Sent from my X10i using XDA App
Your phone is debranded but mine is still not. Since you already asked about debranding, and the easiest method, I think that the build.prop replacement is one easy method, but is it safe to tried?
Sent from my x10 using swype
Mine is Netherlands Customized. Is there a way to get Uk generic? I use english anyway and I want my update asap
Sent from my X10i using XDA App
bluebanana said:
Mine is Netherlands Customized. Is there a way to get Uk generic? I use english anyway and I want my update asap
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I believe you can flash it to a generic UK, but I would like to have an updated method for debranding, safe and reliable
if anyone can contribute?
SaintyUK said:
Are you on R2BA026? I would expect that to be generic yes.
Click to expand...
Click to collapse
Yes, I got the 026 firmware in July, I think.
Okay, thx for the reply. I was 90% sure, but it''s better to check
Sent from my X10i using XDA App
can i change the Country from Germany to UK?
i think you have to do a debranding. check the x10 dev section, newbies guide
tookieboy said:
i think you have to do a debranding. check the x10 dev section, newbies guide
Click to expand...
Click to collapse
it is not clear the guide and some of the methods are not valid anymore :S can anyone who makes a debrand recently post how he did it?
tezzad said:
Firstly, a while back I 'rooted' my phone with the 'Exploid One Click .apk Root (Latest v.1.08 30 Aug. 2010)' method and all was well.
However I ran the update service on my pc recently (looking for 2.1 DOH!) and it gave me an update...which left my phone unrooted but with the latest 'RBA026' build number.
Click to expand...
Click to collapse
Grrr. I have had my ATT X10a rooted for a while, and SEUS/PC Companion/Update always says I have the latest firmware.
It's been 30 days for me, I want to put in generic X10a NAM firmware so I don't have to deal with any changes SE/ATT may have made to make it harder to root/debrand.
I've dealt with Davinci in the past to debrand my SE Java based phones, just never with an android phone. I've gone over the threads here, but 99% deal with X10i and X10a Rogers and X10a AT&T firmware seems to be a bit different and forced the SEUS update that prevents the substitute files exploit.
Even the substitute files exploit seems to require that you actually update date twice, once with the 'current' firmware that you got, and then again with the swapped two files.
The Rooting scheme that is often pointed to, http://forum.xda-developers.com/showthread.php?t=717949 is confusing for X10a. I've downloaded the files mentioned, and the extra x10a files. But to me, the flash rom is in the X10i download and there is what looks like a partial flash in the step4cmd in the the fixes something and makes it a x10a? Is this correct? The only X10a/i difference is the 10K file?
I wish someone would rewrite the directions specifically for the "I" and "A" versions so there is no confusing language like, '#5 do Step 4' and there was only a single flash required. (I particularly find this funny since step 4 and 5 were eliminated for the "I" version.)
Whatever happened to the "update" file on the SD card method? There was a CRC error problem? I wish I could find a NAM rom that just had to wrapped/renamed to Update and put on the SD card. Reboot, wait a bit and you're gold.
yeah. i just did. i posted because i followed that guide, and now on 026. it's pretty easy. just make sure to look thru the troubleshooting threads listed in that post for help.
Did you install the DT update? If so, you will be prompted that an update is available. If you do it, it will install the same ROM but you will lose ROOT and DT.
If you load back the original kernel.sin file from the .024 Global NAM firmware and run SEUS again, it will tell you have the latest software.
So dont update now by SEUS
flash kernal.sin is better because SEUS remove root access
There arent any update for mine :S
Can't confirm.
No update yet.
From Chile, no update available using generic firmware. 024
Sent from my X10a using Tapatalk
rabetionline said:
Multitouch update is avialble for all the regions!
Please check your SEUS!
Click to expand...
Click to collapse
Fake info
use this :
http://forum.xda-developers.com/showpost.php?p=10736620&postcount=1
tnx @Bin4ry
no update
just install trash sony app and loses root
I can confirm
matrix_rl2000 said:
Fake info
Click to expand...
Click to collapse
Not fake , Please use the flash to get dual touch even though your seus would not show the update
rabetionline said:
Multitouch update is avialble for X10i
Please check your SEUS!
Click to expand...
Click to collapse
In Italy is not aviable
Wasn't available in Uruguay through PCC 2 hours ago before i took it to the service. Will have it back on Monday, hope the update is available and rooted by then.
Does this update change anything besides adding MT feature and removing JIT and root? Because I already implemented this onto .024 with Bin4rY's method.
So, anything new besides MT? I don't think SE released a changelog, right? They never do...
qwer23 said:
So, anything new besides MT? I don't think SE released a changelog, right? They never do...
Click to expand...
Click to collapse
Dualtouch in browser and google maps, isn't that enough for you??
I'm curious as to why SE even produced a X10a.
AT&T X10 hasn't even received a 2.1 update yet while the rest of the globe is on their third.
reptile64 said:
Dualtouch in browser and google maps, isn't that enough for you??
Click to expand...
Click to collapse
Could still be other software fixes! And i would like to know aswell, is there anything different from .24 besides DT? Cheers
Sent from my X10i using XDA App
Well safe bet is that this update also brings DT support for mediascape, browser, and all phone generally.
admad said:
Well safe bet is that this update also brings DT support for mediascape, browser, and all phone generally.
Click to expand...
Click to collapse
In a video i saw from some asian site they had implemented the one finger zoom in MS, anyone with DT addon that can try? Just press and hold on an image for a sec and try swiping up or down
Sent from my X10i using XDA App
in-call volume any better?
hrmmz i did the flash update for dt or mt but i do not see a difference, i download multitouch tester app and i do touch twice and get a 1 and 2 and i can pinch spread etc.. so im assuming it works, on home screen i can pinch in and all three home screens will appear as smaller windows kinda like the browser pages do. So is this the dual touch we expect?? I notice no difference in browsers.
I just checked SEUS running CDA 1234-4820 X10a 2.0.2.A.0.24 and there IS and update. I did not update until someone can confirm that we can root the new update?
I can NOT confirm if this for DT or not.
Worked in Singapore! Might work for other regions also..pls try and report
imugur said:
there is a very simple way to do it: root your phone, change in system/build.prop these 2 lines:
ro.semc.version.cust=XXXX-XXXX
ro.product.name=X10_XXXX-XXXX
change the X with 1234-8465
restart phone and run SEUS
Mugur
http://mugur-ionescu.ro/tag/xperia
Click to expand...
Click to collapse
thanks bro!
i am on 0.435 now...no need to flash.
For anyone else stuck this way is just as good, its my baseband flashing guide. Normal installation and easy method. Everything you need is here
http://forum.xda-developers.com/showthread.php?t=939812
Sent from my FroShed x10i running Cyanogen Mod 6.1.1
This is brutal!
Good tutorial
dosnt work on me...
everytime i close the file editor the numbers will change as the original...
jakp3 said:
dosnt work on me...
everytime i close the file editor the numbers will change as the original...
Click to expand...
Click to collapse
use root explorer, mount as r/w. if it doesn't work it means your phone is not rooted
Thank you, nowim downloading the update, can i set the numbers back after this update?
jakp3 said:
Thank you, nowim downloading the update, can i set the numbers back after this update?
Click to expand...
Click to collapse
you can set them back but don't try to run SEUS again, it will install old firmware.
Mugur
http://mugur-ionescu.ro/tag/xperia
I'm from singapore too, isn't there another way to install 435? tried the other methods and that dint allow me to search for my network operator... i'd try your way but it's kinda troublesome to re-root and install
jakp3 said:
dosnt work on me...
everytime i close the file editor the numbers will change as the original...
Click to expand...
Click to collapse
u have an older version of Root explorer..i was having same problem.
i am using 2.10.1 ...press Menu key after editing the values and tap on Save.
jakp3 said:
Thank you, nowim downloading the update, can i set the numbers back after this update?
Click to expand...
Click to collapse
no need to set them back...because if u do that...and u run SEUS..it ll give u back the older version
hawk13 said:
I'm from singapore too, isn't there another way to install 435? tried the other methods and that dint allow me to search for my network operator... i'd try your way but it's kinda troublesome to re-root and install
Click to expand...
Click to collapse
i am the laziest guy on this forum...hence this method is the quickest..
rooting X10i is extremely easy...check the sticky.
what u need:
1. Rooted X10i
2. Root explorer app (version 2.10.1 recommended)
3. Refer to this thread.
working
I have followed imugur's instructions as given in the first post but rather than changing my UK Generic version for the Nordic one (1234-8465) I went for the Global Generic (1232-9897)
I first tried the phone's own check for updates after rebooting but it found nothing, however, I then tried PC Companion and was immediately given the new software update (with a specific mention of multitouch support being added)
Going through the process now, PC Companion estimates a total time of 30 mins
Cheers,
Mik
Keeps saying that I have the latest firmware i have .24 no multitouch, already on nordic firmware, no update through seus, pc companion or phone.... trying a repair
currently on 2.0.2.A.0.24
x10i
kernel 2.0.49
haha repair said there is no software availible for my phone yet. Please try again later
will this work if i am in canada?
Thats where i am and so far nothing
jeffminz said:
Thats where i am and so far nothing
Click to expand...
Click to collapse
If you got a X10a and flashed X10i firmware on it or vice versa, SEUS and PCC will not recognize your device.
MikLSP said:
I have followed imugur's instructions as given in the first post but rather than changing my UK Generic version for the Nordic one (1234-8465) I went for the Global Generic (1232-9897)
I first tried the phone's own check for updates after rebooting but it found nothing, however, I then tried PC Companion and was immediately given the new software update (with a specific mention of multitouch support being added)
Going through the process now, PC Companion estimates a total time of 30 mins
Cheers,
Mik
Click to expand...
Click to collapse
Hi MikLSP, any update....did this work?
EDIT: also any Rogers, Canada users done this update or could someone recommend a 2.2 ROM with multi-touch already in?
arkedk said:
If you got a X10a and flashed X10i firmware on it or vice versa, SEUS and PCC will not recognize your device.
Click to expand...
Click to collapse
hmmm thats interesting, have to look to switch it back to x10a
Thanks for the insight
And what's the point of that?
The biggest advantage of flashing is to give us a faster phone and most important dualtouch.
By doing that way you can't get either.
And more. I'm not sure about this but on every custom roms you must have 435 flashed so that dualtouch work. Not sure trough.
sent from [MOD][rendeiro2005]Cyanogen6.1.1_v03
jeffminz said:
hmmm thats interesting, have to look to switch it back to x10a
Thanks for the insight
Click to expand...
Click to collapse
If you're rooted you can just change the CDA numbers back to a X10a device, then it will be recognized again.
Downloading
MikLSP said:
I have followed imugur's instructions as given in the first post but rather than changing my UK Generic version for the Nordic one (1234-8465) I went for the Global Generic (1232-9897)
I first tried the phone's own check for updates after rebooting but it found nothing, however, I then tried PC Companion and was immediately given the new software update (with a specific mention of multitouch support being added)
Mik
Click to expand...
Click to collapse
I did the same thing as Mik and had the same results.
I am downloading the update at the moment.
Success!
It worked! I am now using multitouch!
3D Google Maps here I come...
Just got the update. Don't know yet what's new.
Nothing visible so far, maybe some optimization and fix for the screen bug.
Only difference I can spot is that the network type (H/4G/LTE etc.) is now placed on the left of the reception bar instead of above it.
YwaFTW said:
Only difference I can spot is that the network type (H/4G/LTE etc.) is now placed on the left of the reception bar instead of above it.
Click to expand...
Click to collapse
That didn't change for me though. I'm on E5803 Malaysian firmware. All I noticed was that the animations are faster and the apps are opening faster. That's it. Also no issues with auto brightness so far
Sent from my E5803 using XDA-Developers mobile app
FM radio is working fine now
No change to GUI whatsoever (CE version)
Tried Antutu benchmark after this update and score was 75601. Finally a decent score without putting the phone into freezer
smooth_gl said:
Just got the update. Don't know yet what's new.
Click to expand...
Click to collapse
I just upgraded too.
The default SMS app now has stickers(You actually have to download Sketch from the play store)
and there are some new quick share options at the popup menu that appears when you share a file.
Also, it says something about a revamped camera ui but I see nothing different....
GiannisTP said:
I just upgraded too.
The default SMS app now has stickers(You actually have to download Sketch from the play store)
and there are some new quick share options at the popup menu that appears when you share a file.
Also, it says something about a revamped camera ui but I see nothing different....
Click to expand...
Click to collapse
It said that on first MM update also, but i guess revamped ui is referring to update that we receive already on october
Zenthusiast said:
Tried Antutu benchmark after this update and score was 75601. Finally a decent score without putting the phone into freezer
Click to expand...
Click to collapse
After 6.0 update I never got less than 84000 actually.
Sent from my E5803 using XDA-Developers mobile app
Sadman Khan said:
After 6.0 update I never got less than 84000 actually.
Sent from my E5803 using XDA-Developers mobile app
Click to expand...
Click to collapse
Wow, nice.
zwirek75 said:
FM radio is working fine now
No change to GUI whatsoever (CE version)
Click to expand...
Click to collapse
That's all I wanted. At last Im going to be able to use my radio.. Thanks for posting this
EmZvr said:
That's all I wanted. At last Im going to be able to use my radio.. Thanks for posting this
Click to expand...
Click to collapse
Actually I had two updates. One in the morning - and FM radio worked.
Then another in the afternoon and FM radio broke again ...
Sorry for a bad news ...
I think with .185 update low light photos just got even worse in SA, instead of bluish tint now i got purple ones :S
I hope this fixes the wired and bluetooth audio stuttering.
In Lollipop you couldn't get system software updates OTA if you were rooted, but I just got a notification that this version is ready to install... I'm running rooted 32.1.A.1.163. Will I lose root if I install? Will it install at all? Thanks in advance if anyone knows.
Mikednx said:
In Lollipop you couldn't get system software updates OTA if you were rooted, but I just got a notification that this version is ready to install... I'm running rooted 32.1.A.1.163. Will I lose root if I install? Will it install at all? Thanks in advance if anyone knows.
Click to expand...
Click to collapse
If your bootloader is unlocked,then the only way to update, is to flash it via flashtool. OTA or PC Companion won't work
Sent from my E5803 using XDA-Developers mobile app
post removed
xpericheck says the new firmware is out for customized DE, i will install it in a hour.
Mikednx said:
In Lollipop you couldn't get system software updates OTA if you were rooted, but I just got a notification that this version is ready to install... I'm running rooted 32.1.A.1.163. Will I lose root if I install? Will it install at all? Thanks in advance if anyone knows.
Click to expand...
Click to collapse
I tried updating with root and it failed. I also want to know if root is possible with thia update.
I'm using a rooted phone myself - while I use the DRM key emulation I know OTA updates will most likely fail so I will perform the upgrade manually.
Would anyone please check the Android security patch level?
If you go to System Settings - About phone. One entry says "Android security patch level" which is February 1st on the .163 version. Did this one increase maybe?
If so, it would be worth the hassle with Flashtool and rerooting and such for me to upgrade.