Database Users

X1 cant detect wireless N-Router--NEED HELP!

Hi guys, my X1 seems to have some problems connecting to my home wireless belkin router ( N-series). i can locate other networks in the area but fail to locate my N router which is just beside me! please help me! i recently upgraded from a G router to a N router, but it shud be compatible. any ideas?

dedt said:
Hi guys, my X1 seems to have some problems connecting to my home wireless belkin router ( N-series). i can locate other networks in the area but fail to locate my N router which is just beside me! please help me! i recently upgraded from a G router to a N router, but it shud be compatible. any ideas?
Click to expand...
Click to collapse
have u checked if your router is sending/recieving B and G signals.
u usually have an option to have just N, B, G or all the signals running

dedt said:
Hi guys, my X1 seems to have some problems connecting to my home wireless belkin router ( N-series). i can locate other networks in the area but fail to locate my N router which is just beside me! please help me! i recently upgraded from a G router to a N router, but it shud be compatible. any ideas?
Click to expand...
Click to collapse
Xperia does not support Draft N. Only B & G Standards. Do what Ganondolf suggested or regret your purchase.

dedt said:
Hi guys, my X1 seems to have some problems connecting to my home wireless belkin router ( N-series). i can locate other networks in the area but fail to locate my N router which is just beside me! please help me! i recently upgraded from a G router to a N router, but it shud be compatible. any ideas?
Click to expand...
Click to collapse
You need to create a "guest" connection. This means your router has to send out two signals. One for your primary users, and one for your guests. Log into your router, new routers should have a guest mode. Enable it, give it a name, assign a pw, and your phone should recognize.

all hope is gone!
i dont think there is a solution to this problem, i confirmed that my router mode is set to B G N, and my phone does not detect the network, however when i set the router to G, it works with the x1. i called belkin and they said that the frequency of the modem is too high for to phone and told me to set the modem to G, however i refused. I bought an N router for a reason for Gods sake. If i was going to set it to G, might as well saved some money and purchased a G router. SAD! looks like nothing can be done.
i have no idea how to do the guest mode, will that work tho?

Which Belkin model do you have?
Most are supported by DD-WRT (alternative, open source firmware) A lot of problems in OEM firmware are solved through the use of DD-WRT, as it offers more options and stability (such as max simultaneous connections for linksys routers)
To check if your router is supported: http://www.dd-wrt.com/dd-wrtv3/dd-wrt/hardware.html

try disable extensions/turbo mode etc, this helps alot on dlink routers
and leave b,g,n on, check if you can change the channels they are running on etc

dedt said:
i dont think there is a solution to this problem, i confirmed that my router mode is set to B G N, and my phone does not detect the network, however when i set the router to G, it works with the x1. i called belkin and they said that the frequency of the modem is too high for to phone and told me to set the modem to G, however i refused. I bought an N router for a reason for Gods sake. If i was going to set it to G, might as well saved some money and purchased a G router. SAD! looks like nothing can be done.
i have no idea how to do the guest mode, will that work tho?
Click to expand...
Click to collapse
No such problem exist with my draft n d-link router?
I doubt that you must switch to G only in order for X1 to connect
In terms of "FREQUENCY" they mentioned, mainly there are two types of settings you can mess with
More advanced draft N router has two major different frequencies - 2.4 Ghz, or 5 Ghz. And if you router is using 5Ghz, then X1 obvious can't connect to the router coz 5Ghz requires the latest draft n technology. However there should always be settings where you can just switch it back to 2.4 Ghz. Personally 2.4 and 5 Ghz doesn't make much difference unless you have 20 wiresless devices all using 2.4 Ghz at home.
Another type of "frequencies" are sometimes called "channels" ... e.g. you will see some wireless hotspot are on CH1, CH2, .... and it should go all the way up to CH 13. These channels operate at frequencies very close to the major frequency, e.g. CH1 = 2.412, CH2=2.417, ... , CH13=2.472. However it has been reported and personally tested that X1 seems to have problems with channels higher than 11.
This isn't a surprising problem because these high channels are designed for 108Mbps wireless adapter and clearly X1 isn't capable of such high speed.
(amusement at "Firefall!": I don't think it's necessary to "regret" purchasing X1 just because it doesn't support draft N? Have you tried using high performance in WIFI settings and realize how fast the battery runs out? How long do you think the battery will last if they place a draft N WIFI chipset into the device? And what sort of HD videos are you planning to watch on your phone that requires draft N speed of 300 Mbps?)
Hence, you should try setting your router to 2.4Ghz mode (if you are currently on 5Ghz) and change it to channels below 11. And your X1 should be able to connect to the router

I have my X1i running with my Belkin N1 Vision Router working perfectly. Check your hardware son .

I have the Belkin N+ router...
http://www.gooddvdstuff.com/news/files.php?file=belkin__109732273.jpg
And my Xperia does not connect to the router unless I create a "guest" mode. So I broadcasted a secondary guest connection and it works.

me again
ok, this is the modem that i am using and having trouble with,
http://www.vsbuyse.be/webafbeeldigen/computer/BelkinF5D8636ED4A.jpg
model, F5D8636
and note, i never regretted buying the x1. It was the modem that i regretted!
any keep giving suggestions and will let u know if i found a solution. THANKS GUYS

dedt said:
ok, this is the modem that i am using and having trouble with,
http://www.vsbuyse.be/webafbeeldigen/computer/BelkinF5D8636ED4A.jpg
model, F5D8636
and note, i never regretted buying the x1. It was the modem that i regretted!
any keep giving suggestions and will let u know if i found a solution. THANKS GUYS
Click to expand...
Click to collapse
not sure what to say bud, maybe changing from 5ghz to 2.5ghz might work if u have a option but like u said if your pc is using n then u dont want to go down to g just so your phone connets.
ps. if your pc does not use n (or any other device) u getting a n router is pointless as even if your pc is connecting, its doing it through g not n.
ps2. i always go for netgear routers, seem to work better for me bud

wifi signal, but no internet.

Hi
I just received my htc hero, and I really love it.
The only problem is, is that when i try to browse the web it doesnt load webpages. My WiFi is signal is good, i even removed the WEP key but still no succes, and on my old iPhone I can browse the web using the same WiFi connection
Does anyone know what the problem is?
Mike

Can you use the internet on your pc? Is your router setup properly?

yep everything is good..

does obtain an address ??

yes its 192.168.1.101

also if connected, select the menu key and hit advanced, make sure its not set to a fixed (static) address unless you need that.
I have mine set to 14 channels too... not that I probably need that...

i did that and it is not static also set it on 14 channels but no effect

well i had that issue when i just got my hero phone. everything was fine, signal was excellent, dhcp was ok , and it even got an ip but there was no data connection present. The only solution was to update the router's driver. In my case, it was a d link 524.try that too. ( just to precise that i had no problems with my previous phones with the router)
Another thing is to try setting the router to g mode only.

deeren said:
well i had that issue when i just got my hero phone. everything was fine, signal was excellent, dhcp was ok , and it even got an ip but there was no data connection present. The only solution was to update the router's driver. In my case, it was a d link 524.try that too. ( just to precise that i had no problems with my previous phones with the router)
Another thing is to try setting the router to g mode only.
Click to expand...
Click to collapse
yeah i already updated the router and i have set it into G mode..\
im getting crazy xD

Mikeytjee said:
yeah i already updated the router and i have set it into G mode..\
im getting crazy xD
Click to expand...
Click to collapse
what type of router do u have? u might want to search for a hacked driver for it. o know for a fact that u can find a lot for linksys.
try to connect to other AP's just to confirm that the problem is a compatibility issue bet ur phone and ur specific router and not the phone itself.

I got the same problem.
at home it works great with the router.
But at another router by my girl,
it connects to the router but the Internet doesn't work.
Sometimes it works for about 3 minutes.
I couldn't find the problem and her laptop works great
with that router.
The router is a Sitecom Wl-173.
Do you have the same router?

I am having a similar issue. It will work for a few minutes and then although the router signal says good I get no data coming through.
This is only a recent development though as I upgraded from a Linksys WRT54G router to a Linksys WRT160NL (which is Wirless-N), now I know that the Hero doesn't support N but the router is set to mixed mode as I have more G devices than N in my house so it should still work fine.
I will try tonight though swapping the router over to just work in G mode and see how I get on.

Its been suggested that the stock Linksys firmware on all models has issues with the Hero, which is why my old router was OK as it was running Tomato firmware instead of stock Linksys.
I guess I'll just have to wait until a 3rd party releases one for the WRT160NL

I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.

I had a similar problem with my router. What did it for me was to disable all security stuff (WEP / WPA) AND access control (i.e. define which devices may connect to your router). Then try to surf via hero. If surfing works, switch back on security stuff, surfing should still work. At least it did for me.

Svarto said:
I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.
Click to expand...
Click to collapse
I second this, however,if you still have the Di 524,you should know that an update is out and it fixes the connectivity problem.

Svarto said:
I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.
Click to expand...
Click to collapse
The wifi-stack in the kernel on the hero doesn't work well with many APs. With D-link I've found problems when the boxes run in 802.11n with b/g compatibility. The results are best with the AP locked at 802.11g.

deeren said:
I second this, however,if you still have the Di 524,you should know that an update is out and it fixes the connectivity problem.
Click to expand...
Click to collapse
I have that router and have the Wi-fi connectivity issue on my Hero. I've been looking around for updates for firmware/drivers but haven't been able to find anything.
Do you have a link to the update you used?

spiridk said:
I have that router and have the Wi-fi connectivity issue on my Hero. I've been looking around for updates for firmware/drivers but haven't been able to find anything.
Do you have a link to the update you used?
Click to expand...
Click to collapse
what is your version od the di524? is it the g2 version?

I think it is the G2 version, yes. It does say G2 on the label on the back of the router.

[Q] WiFi problems and questions

My WiFi on the Atrix crashed all my 3 routers (ActionTec/Dlink/Linksys), sometimes after a few minutes, sometimes after several hours.
The routers needed restart after that. Also wired connections were affected.
I tried messing with static IPs and sleep mode, nothing worked!
Now I upgraded my Dlink DIR 655 from 1.11 to 1.33 (supposedly the best).
Things changed
Now my Atrix takes only itself down, the Dlink keeps working for other wireless and wired devices.
The Atrix says its connected and I get the icon with full bars, however no data is transferred. The market and other apps say network error.
I can switch connection over to my other WIfi network and all is good again.
Has anyone seen this behaviour?
Also is there an app that shows me the link mode G or N and the current link speed? I cant seem to find a good app. I would also like to see if I can lock the Atrix to G or N only. Is there such a toggle switch?
Thanks.
Update: Switched connection from Dlink to Linksys and it worked for about 30 minutes then the linkksys crashed (could not reconnect got no IP). Switched back to the Dlink, got connected, good signal but no data. Even after a phone reboot. So I think it might be still on the DLink side although I have Netflix (PS3 wireless) and another PC connecting fine. This and the VOIP mic problems (Skype etc...) bug me the most about the phone.

ive been having this same problem since i got my phone and im still having problems. its pissing me off. cant even use my netflix through the Wii to watch on the big screen

spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.

gnahc79 said:
spacev and trapjawmusic, who is your internet provider? I have a POTS+DSL line + WRT54GS and never encountered this problem.
Click to expand...
Click to collapse
centurylink is my isp. i dont know if its my router that is just crappy or my cell phone is interrupting it while the wifi is on and im trying to browse causing the routers wifi to cut everything off thats on wifi

Wifi obtaining ip address....

My Wifi connected to my home router perfectly until I flashed the custom rom.
Now it wont work. the phone recognizes my network, then tries to connect but it pauses at the obtaining ip address bit and doesn't connect?
I tried to restart the router. It doesn't work.
I tried to reflash the rom or offical rom (KE7). It doesn't work.
I also tried to delete the file /data/misc/dhcp/dhcp_list, but there are no "dhcp_list" file inside 'dhcp'
Do anyone have another way to solve this problem?
Thanks

Could be a problem with the router, are other devices able to acquire IP addresses from it correctly?
Perhaps you should assign a static IP to see if that makes a difference.

I am on KE7 stock rom with root and had this problem too. It just started yesterday and got stuck at obtaining ip adress. So I switched WIFI off and flight mode on and after some seconds wifi on and flight mode off and it connected. I also noticed that now sometimes when it is in standby it disconnects from the wifi network (but wifi is still ON) and when I wake it up it connects to my network.

Me too, same problem.
If wifi is ruled on "sleep when screen turn off", it don't wake when screen turn on.
It stay on " searching for IP adress...".
For the moment, I'm forced to leave wifi on "never" and I use Juice defender for disabling wifi on screen off.
I really think it's a common pb with SGS 2. May be it will be fixed with 2.3.4.

Same problem. I 'fix' it by turning off wifi then turning it back on and it gets an IP address immediately.

same problem here with a dlink dir-615 router. from time to time the phone can't get an ip, and it only works if i reboot the router. didn't try with another router yet ( well, i connected to a few more but not frequent so i can see if there are problems), but i ordered a new one anyways since the dlink also crushes my battery too.
try posting the brand/model of the router you have problems with, maybe there's some specific ones that are troublesome.
d-link dir-615 here / ke7 stock - rooted

I also have a dlink router. But I get the same problem with a Belkin.
With my first SGS, no problem. I really think it's a specific issue on SGS2.
I'd read in some place that 2.3.4 will fix some wifi problem known for the moment on 2.3.3...
Let's see...

I'm seeing this with both my home router (Netgear WNDR3700) and my office router. Disabling & re-enabling WiFi on the SGS2 solves it -- fortunately, it's easily accessible on the notifications panel.

Same thing with Dlink dir 815.
Sent from my GT-I9100 using XDA Premium App

Same thing here with Draytek 2820 router, all other devices (PC's Phones, PDA's etc) have no problem. SGS2 however needs WiFi turning off when waking from sleep to get it to obtain an IP address again. However my HD2 also running Gingerbread 2.3.3 works faultlessly.

KF2 seems, for me and some others, fix the problem...

hi
lucky me, i thought im the only 1 having problem with wifi
my problem, same as the others
the wifi try to connect (obtaining IP) and then disconnected
it will scan again, same thing will happened
try with all type of protocols, wifi b,g,n wep, wpa, no passwd
results still same
try to connect wifi at my office, results also the same
im on KF1 using dlink 615
hopefully someone can help us
tq

Just got my Galaxy S2 today. Cannot connect to wifi network on G or mixed mode, with or without security - just tries to obtain an IP address. Ridiculous.
Any help ? Quick search on Google doesn't bring up too much. There does seem to be an app called "FXR Wifi" but I don't expect to use that on a brand new phone.
Update: Upgraded my router's firmware (WRT54GS) and it works !

I have the same problem with my SGS 2. I can't connect to an AP - NETGEAR DG834G.
I found a partial solution to use my phone with my AP until I solve the problem. In the Wi-Fi settings menu enter Advanced mod and set the IP address, Gateway, Netmask, DNS1 manualy (by touching <Use static IP>). If you don't know what IPs you have to set for IP address, Gateway, etc. just connect with you laptop or desktop and use the settings from your computer. Just make sure you type a different IP address in your mobile (not the one from your computer - for example in you computer you'll find something like this: 192.168.0.3, you'll have to type in your mobile something like this: 192.168.0.10). The rest of the settings have to be identical.
Good luck!

To solve this "obtaining ip address problem". Set the following manually in the advanced configuration and save it.
1. ip address(your choice).
2. subnet mask(255.255.255.0).
3. default gateway(192.168.1.1).
4. dns servers(8.8.8.8,8.8.4.4)
Note: The above given values are the most commonly used, you change it if you want so.
After entering these values manually(and correctly), it will connect to the networ in 1 or 2 seconds.

like mine SG s2, wifi connects works perfectly at home and friends place,
but stucks at obtaining ipaddress for wifi, at the mall and college, ( where it needs first login page for authentication) ( or to agree user terms and regulation),
any idea, how to fix this issue.
Thanks

mine also does this where it doesn't get an ip. Reboot your router or just disable and re-enable the access point feature on the router and it should work without having to reboot it
Sent from my GT-I9100 using Tapatalk

but at university?college or mall, we dont have access to router.
any other idea to fix this
Thanks

Hey guys! Did you find a fix for this problem? I have the same thing happening right now. I tried at different places, home and country house with Zyxel P660HN and Cisco E4200 respectively. Stuck at obtaining IP address...

XSCounter said:
Hey guys! Did you find a fix for this problem? I have the same thing happening right now. I tried at different places, home and country house with Zyxel P660HN and Cisco E4200 respectively. Stuck at obtaining IP address...
Click to expand...
Click to collapse
Search xda with 'wifi rare' and 's2 wifi not working'.. U can find few threads dealing with wifi problem..
Sent from my GT-I9100 using XDA Premium App

yu yureka wifi problem

I am facing a WiFi problem.
When I connect the phone (yu yureka) WiFi to my college network it doesn't connect to the WiFi.
When it rarely do it get restarted again and again.
It works fine with my home network.
Please help.

Even i am facing the same problem
madhurjain said:
I am facing a WiFi problem.
When I connect the phone (yu yureka) WiFi to my college network it doesn't connect to the WiFi.
When it rarely do it get restarted again and again.
It works fine with my home network.
Please help.
Click to expand...
Click to collapse
Even i am facing the same problem

R u in same collage????lol!!!

dhruv_yureka_holder said:
R u in same collage?lol!!!
Click to expand...
Click to collapse
May be
I am in Hindu college Delhi university

bro i m facing data connection issue.
Automatically network goes & my data connection is lost.

madhurjain said:
I am facing a WiFi problem.
When I connect the phone (yu yureka) WiFi to my college network it doesn't connect to the WiFi.
When it rarely do it get restarted again and again.
It works fine with my home network.
Please help.
Click to expand...
Click to collapse
I am in Lovely Professional University and i am facing the the same issue when connected to my hostel's wifi network . although the same kind of wifi setup is also there in the campus but there it works fine but in the hostels the phone gets restated again and again when connected to wifi .

I am also facing the same problem. In my case its only for particular settings of the wifi. On some settings the mobile is fine while in some ip address settings in college , the mobile gets restarted.
Sent from my AO5510 using XDA Free mobile app

My WiFi works fine in my college. I am in Bangalore! It's a great phone IMO. I've hear a lot of complaints about the phone but I haven't personally faced any of it

this device has 2 wifi mac address i don't know how but when i restarted my phone my mac address changed and when i added my wifi mac to my wifi router settings it did not allowed it to connect.. i.e. one mac address works but another one don't..

Nik_ said:
this device has 2 wifi mac address i don't know how but when i restarted my phone my mac address changed and when i added my wifi mac to my wifi router settings it did not allowed it to connect.. i.e. one mac address works but another one don't..
Click to expand...
Click to collapse
Hi All,
My yureka mobile is not even detecting the available wifi connections, is there any solution for this issue.
NOTE: My another phone is able to detect the available wifi connection but yureka does not.
Guys, please help me resolve this issue.
Thanks,
Elaiyaraja M.
---------- Post added at 11:42 AM ---------- Previous post was at 11:22 AM ----------
Elaiyaraja said:
Hi All,
My yureka mobile is not even detecting the available wifi connections, is there any solution for this issue.
NOTE: My another phone is able to detect the available wifi connection but yureka does not.
Guys, please help me resolve this issue.
Thanks,
Elaiyaraja M.
Click to expand...
Click to collapse
It is listing out all available wifi connections, but we have to tap on the wifi settings once we turned it "ON".

check if you have not checked the avoid poor connection button..

Same problem
phone gets restarted every time i connect to any wifi routers but not to any wifi hotspot from laptop....!
Suggest some remedy for it plzzz...!!

Fix for Wifi issue
Go to recovery mode(google it if you don't know how), Wipe cache and restart your wifi might work.

WIFI Issue
This Issue is still present. I tried flashing custom ROMS also, but no use. Anybody has a fix or solution for this phone restart issue when connected to a public wifi?

Kaushik_n said:
This Issue is still present. I tried flashing custom ROMS also, but no use. Anybody has a fix or solution for this phone restart issue when connected to a public wifi?
Click to expand...
Click to collapse
Yureka for some reason has issues with a some type of authentication protocol that these public and college Wi-Fi routers use. So this restart issues will persist irrespective of the ROM you are using.

im facing the wifi problem but it is not restarting it is not getting connected to wifi . but before last weak it was getting connected

madhurjain said:
I am facing a WiFi problem.
When I connect the phone (yu yureka) WiFi to my college network it doesn't connect to the WiFi.
When it rarely do it get restarted again and again.
It works fine with my home network.
Please help.
Click to expand...
Click to collapse
Hi dude,
I am also facing same problem but I found a solution by installing 'WiFi fixer' app from play store then onwards its working,device is not at all restarting. But this app restarts WiFi module of your device instead of restarting entire device.

i am also facing same problem of yureka wifi not connecting in college
in home it works fine
once it gets connected but aftr that i have to restart it

I am getting disconnected after a few min,when I don't use it.After rebooting my yureka device twice,then the WiFi gets connected. Suggest me a solution please.

When I use any other rom except primary rom via multiboot patcher wifi.anf.hotspot does not work but it work good in primary rom.......why.....plzz solution