Screen goes Black with Gingerbread? - Desire HD General
Hello Guys
Just tried to install allmost every CM7 mods for my DHD, but every time, when i receive a call, the screen goes black, and can't get awake again....
Whn running standard 2,2 Rom, there's no problems at all - so it must be a bug with the 2.3 version?
Does anyine have a solution for this?
Numsefis said:
Hello Guys
Just tried to install allmost every CM7 mods for my DHD, but every time, when i receive a call, the screen goes black, and can't get awake again....
Whn running standard 2,2 Rom, there's no problems at all - so it must be a bug with the 2.3 version?
Does anyine have a solution for this?
Click to expand...
Click to collapse
Did you flash using clockwork recovery 3. The 2.5.3 is not compatible with cm7
Sent from my Desire HD using Tapatalk
Yes i did, tried both of them...
I didn't get any problems when flashing with CWM 2,5.... Other than the screen bug...
But that's the same with CWM 3,5
Numsefis said:
Hello Guys
Just tried to install allmost every CM7 mods for my DHD, but every time, when i receive a call, the screen goes black, and can't get awake again....
Whn running standard 2,2 Rom, there's no problems at all - so it must be a bug with the 2.3 version?
Does anyine have a solution for this?
Click to expand...
Click to collapse
Sounds to me like you have a faulty proximity sensor. Do you have this problem with a stock rom as well? If so, I should try to return your DHD to get a replacement or repair.
There's no problems at all with the standard DHD Sense rom.... That's what wondering me - i tried restoring it, to confirm that the phone wasn't broken...
Made a log with logcat, when receiving a call:
D/alogcat ( 2223): stopped
D/alogcat ( 2223): starting ...
D/dalvikvm( 1561): GC_EXPLICIT freed 4K, 53% free 2809K/5895K, external 0K/512K, paused 71ms
I/AudioService( 1330): AudioFocus requestAudioFocus() from AudioFocus_For_Phone_Ring_And_Calls
I/dalvikvm( 2223): Jit: resizing JitTable from 4096 to 8192
D/AccelerometerListener( 1423): enable(false)
V/alogcat ( 2223): save instance
V/alogcat ( 2223): paused
I/power ( 1330): *** set_screen_state 1
D/AudioHardwareInterface( 1208): setMode(RINGTONE)
D/AudioFlinger( 1208): setParameters(): io 1, keyvalue routing=2, tid 1299, calling tid 1208
V/AudioHardwareMSM7X30( 1208): AudioStreamOutMSM72xx::setParameters() routing=2
V/AudioHardwareMSM7X30( 1208): set output routing 2
I/AudioHardwareMSM7X30( 1208): Routing audio to Speakerphone
I/AudioHardwareMSM7X30( 1208): aic3254_configure: sound effect (Recording)
I/AudioHardwareMSM7X30( 1208): do_aic3254_control (1, 175, 1)
V/AudioHardwareMSM7X30( 1208): getACDB, return ID 507
V/AudioHardwareMSM7X30( 1208): doAudioRouteOrMute: rx acdb 0, tx acdb 507
V/AudioHardwareMSM7X30( 1208): doAudioRouteOrMute() device 1, mMode 1, mMicMute 0
D/AudioHardwareMSM7X30( 1208): do_route_audio_rpc(1, 1, 0)
V/AudioHardwareMSM7X30( 1208): In SPEAKER
E/AudioHardwareMSM7X30( 1208): new_rx = 6
E/AudioHardwareMSM7X30( 1208): new_tx = 11
V/AudioHardwareMSM7X30( 1208): 1. De-route Stream/Voice
V/AudioHardwareMSM7X30( 1208): VOICE_CALL 0
V/AudioHardwareMSM7X30( 1208): FM_RADIO 0
V/AudioHardwareMSM7X30( 1208): PCM_PLAY 0
V/AudioHardwareMSM7X30( 1208): PCM_REC 0
V/AudioHardwareMSM7X30( 1208): 2. Route Stream/Voice OR Update Table
V/AudioHardwareMSM7X30( 1208): 3. Disable Current Device RX(0)/TX(1)
V/AudioHardwareMSM7X30( 1208): 4. Enabled New Device RX(6)/TX(11)
V/AudioHardwareMSM7X30( 1208): do_route_audio_rpc END, curr_out_device = 6, curr_mic_device = 11
I/AudioFlinger( 1208): setFmVolume 73
V/AudioHardwareMSM7X30( 1208): open pcm_out driver
V/AudioHardwareMSM7X30( 1208): get config
V/AudioHardwareMSM7X30( 1208): set config
V/AudioHardwareMSM7X30( 1208): buffer_size: 4800
V/AudioHardwareMSM7X30( 1208): buffer_count: 2
V/AudioHardwareMSM7X30( 1208): channel_count: 2
V/AudioHardwareMSM7X30( 1208): sample_rate: 44100
V/AudioHardwareMSM7X30( 1208): get_snd_dev: curr_device 1, mCurSndDevice 1
I/AudioHardwareMSM7X30( 1208): do_aic3254_control (1, 1, 0)
I/AudioHardwareMSM7X30( 1208): aic3254: change rx mode to 13
W/AudioFlinger( 1208): write blocked for 102 msecs, 5 delayed writes, thread 0x12658
V/AudioHardwareMSM7X30( 1208): dec_id = 5 current rx device = 6 mPCMEnableRx= 6
V/AudioHardwareMSM7X30( 1208): get_snd_dev: curr_device 1, mCurSndDevice 1
V/AudioHardwareMSM7X30( 1208): getACDB, return ID 607
I/HTC Acoustic( 1208): update ACDB id: (tx, rx, tx_acdb, rx_acdb) = (11, 6, 0, 607)
D/AudioHardwareMSM7X30( 1208): updateACDB: (6, 11, 607, 0) success!
D/AudioHardwareMSM7X30( 1208): addToTable (dec_id 5, dev_rx 6, dev_tx -1, type 1, active 1)
I/AudioHardwareMSM7X30( 1208): AUDIO_START: start kernel pcm_out driver.
D/alogcat ( 2223): stopping ...
D/alogcat ( 2223): stopped
D/InCallTouchUi( 1423): onTrigger(whichHandle = 1)...
I/phone ( 1423): acceptCall: incoming...
D/InCallTouchUi( 1423): updateState: Too soon after last action; not drawing!
I/AudioService( 1330): AudioFocus requestAudioFocus() from AudioFocus_For_Phone_Ring_And_Calls
D/AccelerometerListener( 1423): enable(false)
D/AudioHardwareInterface( 1208): setMode(IN_CALL)
D/AudioFlinger( 1208): setParameters(): io 1, keyvalue routing=1, tid 1299, calling tid 1208
V/AudioHardwareMSM7X30( 1208): AudioStreamOutMSM72xx::setParameters() routing=1
V/AudioHardwareMSM7X30( 1208): set output routing 1
I/AudioHardwareMSM7X30( 1208): Routing audio to Handset
I/HTC Acoustic( 1208): set_audio_effect: DualMic_Phone
I/HTC Acoustic( 1208): set_audio_effect: match with name DualMic_Phone (0)
I/AudioHardwareMSM7X30( 1208): aic3254_configure: sound effect (DualMic_Phone)
I/AudioHardwareMSM7X30( 1208): do_aic3254_control (0, 175, 0)
I/AudioHardwareMSM7X30( 1208): aic3254: change rx mode to 1
I/AudioHardwareMSM7X30( 1208): aic3254: change tx mode to 1
V/AudioHardwareMSM7X30( 1208): getACDB, return ID 205
V/AudioHardwareMSM7X30( 1208): getACDB, return ID 105
V/AudioHardwareMSM7X30( 1208): doAudioRouteOrMute: rx acdb 205, tx acdb 105
V/AudioHardwareMSM7X30( 1208): doAudioRouteOrMute() device 0, mMode 2, mMicMute 0
D/AudioHardwareMSM7X30( 1208): do_route_audio_rpc(0, 0, 0)
V/AudioHardwareMSM7X30( 1208): In HANDSET
E/AudioHardwareMSM7X30( 1208): new_rx = 0
E/AudioHardwareMSM7X30( 1208): new_tx = 1
V/AudioHardwareMSM7X30( 1208): 1. De-route Stream/Voice
V/AudioHardwareMSM7X30( 1208): VOICE_CALL 0
V/AudioHardwareMSM7X30( 1208): FM_RADIO 0
V/AudioHardwareMSM7X30( 1208): PCM_PLAY 1
V/AudioHardwareMSM7X30( 1208): PCM_REC 0
V/AudioHardwareMSM7X30( 1208): De-route PCM_PLAY stream (dec 5, dev 6)
V/AudioHardwareMSM7X30( 1208): 2. Route Stream/Voice OR Update Table
V/AudioHardwareMSM7X30( 1208): ==== Voice Call Start====
E/AudioHardwareMSM7X30( 1208): Starting voice on Rx 0 and Tx 1 device
I/HTC Acoustic( 1208): update ACDB id: (tx, rx, tx_acdb, rx_acdb) = (1, 0, 105, 205)
D/AudioHardwareMSM7X30( 1208): updateACDB: (0, 1, 205, 105) success!
E/AudioHardwareMSM7X30( 1208): Starting voice call and UnMuting the call
D/AudioHardwareMSM7X30( 1208): addToTable (dec_id 0, dev_rx 0, dev_tx 1, type 3, active 1)
V/AudioHardwareMSM7X30( 1208): Device switch during pcm play (old dev 6, new dev 0)
I/HTC Acoustic( 1208): update ACDB id: (tx, rx, tx_acdb, rx_acdb) = (1, 0, 105, 205)
D/AudioHardwareMSM7X30( 1208): updateACDB: (0, 1, 205, 105) success!
D/AudioHardwareMSM7X30( 1208): modify stream type 1 => dev_rx 0, dev_tx -1
V/AudioHardwareMSM7X30( 1208): 3. Disable Current Device RX(6)/TX(11)
V/AudioHardwareMSM7X30( 1208): 4. Enabled New Device RX(0)/TX(1)
V/AudioHardwareMSM7X30( 1208): do_route_audio_rpc END, curr_out_device = 0, curr_mic_device = 1
I/AudioFlinger( 1208): setFmVolume 73
I/power ( 1330): *** set_screen_state 0
D/NetworkCollector( 2150): state now IDLE
D/SurfaceFlinger( 1330): About to give-up screen, flinger = 0x93320
D/AK8975 ( 1212): Compass CLOSE
V/AudioHardwareMSM7X30( 1208): Out::standby()
V/AudioHardwareMSM7X30( 1208): Deroute pcm stream
D/AudioHardwareMSM7X30( 1208): deleteFromTable, type 1
V/AudioHardwareMSM7X30( 1208): get_snd_dev: curr_device 0, mCurSndDevice 0
I/AudioHardwareMSM7X30( 1208): do_aic3254_control (0, 1, 1)
I/AudioHardwareMSM7X30( 1208): AudioHardware pcm playback is going to standby.
I/AudioService( 1330): AudioFocus abandonAudioFocus() from AudioFocus_For_Phone_Ring_And_Calls
D/alogcat ( 2223): stopping ...
D/alogcat ( 2223): canceling periodic saves
V/alogcat ( 2223): started
V/alogcat ( 2223): resumed
V/alogcat ( 2223): save instance
V/alogcat ( 2223): paused
D/alogcat ( 2223): starting ...
V/AudioHardwareMSM7X30( 1208): open pcm_out driver
V/AudioHardwareMSM7X30( 1208): get config
V/AudioHardwareMSM7X30( 1208): set config
V/AudioHardwareMSM7X30( 1208): buffer_size: 4800
V/AudioHardwareMSM7X30( 1208): buffer_count: 2
V/AudioHardwareMSM7X30( 1208): channel_count: 2
V/AudioHardwareMSM7X30( 1208): sample_rate: 44100
V/AudioHardwareMSM7X30( 1208): get_snd_dev: curr_device 0, mCurSndDevice 0
I/AudioHardwareMSM7X30( 1208): do_aic3254_control (0, 1, 0)
D/AccelerometerListener( 1423): enable(false)
V/AudioHardwareMSM7X30( 1208): dec_id = 5 current rx device = 0 mPCMEnableRx= 0
V/AudioHardwareMSM7X30( 1208): get_snd_dev: curr_device 0, mCurSndDevice 0
V/AudioHardwareMSM7X30( 1208): getACDB, return ID 0
I/HTC Acoustic( 1208): update ACDB id: (tx, rx, tx_acdb, rx_acdb) = (1, 0, 0, 0)
D/AudioHardwareMSM7X30( 1208): updateACDB: (0, 1, 0, 0) success!
D/AudioHardwareMSM7X30( 1208): addToTable (dec_id 5, dev_rx 0, dev_tx -1, type 1, active 1)
I/AudioHardwareMSM7X30( 1208): AUDIO_START: start kernel pcm_out driver.
W/IInputConnectionWrapper( 2223): showStatusIcon on inactive InputConnection
D/dalvikvm( 1330): GC_EXTERNAL_ALLOC freed 939K, 56% free 5571K/12615K, external 9675K/9679K, paused 123ms
D/AudioHardwareInterface( 1208): setMode(NORMAL)
D/AudioFlinger( 1208): setParameters(): io 1, keyvalue routing=1, tid 1299, calling tid 1208
V/AudioHardwareMSM7X30( 1208): AudioStreamOutMSM72xx::setParameters() routing=1
V/AudioHardwareMSM7X30( 1208): set output routing 1
I/AudioHardwareMSM7X30( 1208): Routing audio to Handset
I/HTC Acoustic( 1208): set_audio_effect: Recording
I/HTC Acoustic( 1208): set_audio_effect: match with name Recording (23)
I/AudioHardwareMSM7X30( 1208): aic3254_configure: sound effect (Recording)
I/AudioHardwareMSM7X30( 1208): do_aic3254_control (0, 175, 0)
I/AudioHardwareMSM7X30( 1208): aic3254: change rx mode to 11
I/AudioHardwareMSM7X30( 1208): aic3254: change tx mode to 15
V/AudioHardwareMSM7X30( 1208): getACDB, return ID 0
V/AudioHardwareMSM7X30( 1208): getACDB, return ID 507
V/AudioHardwareMSM7X30( 1208): doAudioRouteOrMute: rx acdb 0, tx acdb 507
V/AudioHardwareMSM7X30( 1208): doAudioRouteOrMute() device 0, mMode 0, mMicMute 0
D/AudioHardwareMSM7X30( 1208): do_route_audio_rpc(0, 1, 0)
V/AudioHardwareMSM7X30( 1208): In HANDSET
E/AudioHardwareMSM7X30( 1208): new_rx = 0
E/AudioHardwareMSM7X30( 1208): new_tx = 1
V/AudioHardwareMSM7X30( 1208): 1. De-route Stream/Voice
V/AudioHardwareMSM7X30( 1208): VOICE_CALL 1
V/AudioHardwareMSM7X30( 1208): FM_RADIO 0
V/AudioHardwareMSM7X30( 1208): PCM_PLAY 1
V/AudioHardwareMSM7X30( 1208): PCM_REC 0
V/AudioHardwareMSM7X30( 1208): Ending Voice call
V/AudioHardwareMSM7X30( 1208): De-route voice stream (rx 0, tx 1)
V/AudioHardwareMSM7X30( 1208): 2. Route Stream/Voice OR Update Table
D/AudioHardwareMSM7X30( 1208): deleteFromTable, type 3
V/AudioHardwareMSM7X30( 1208): ==== Voice Call End ====
V/AudioHardwareMSM7X30( 1208): 3. Disable Current Device RX(0)/TX(1)
V/AudioHardwareMSM7X30( 1208): 4. Enabled New Device RX(0)/TX(1)
V/AudioHardwareMSM7X30( 1208): do_route_audio_rpc END, curr_out_device = 0, curr_mic_device = 1
I/AudioFlinger( 1208): setFmVolume 73
D/dalvikvm( 2223): GC_CONCURRENT freed 367K, 55% free 2819K/6215K, external 1106K/1618K, paused 3ms+3ms
V/AudioHardwareMSM7X30( 1208): Out::standby()
V/AudioHardwareMSM7X30( 1208): Deroute pcm stream
D/AudioHardwareMSM7X30( 1208): deleteFromTable, type 1
E/AudioHardwareMSM7X30( 1208): disable current rx device = 0
V/AudioHardwareMSM7X30( 1208): get_snd_dev: curr_device 0, mCurSndDevice 0
I/AudioHardwareMSM7X30( 1208): do_aic3254_control (0, 1, 1)
I/AudioHardwareMSM7X30( 1208): aic3254: change rx mode to 29
I/AudioHardwareMSM7X30( 1208): AudioHardware pcm playback is going to standby.
I/power ( 1330): *** set_screen_state 1
D/SettingsAppWidgetProvider( 2264): Widget is from a previous version... Let's update
D/SettingsAppWidgetProvider( 2264): No instances yet... Wait for at least one instance to exist before adding global settings
V/alogcat ( 2223): resumed
D/NetworkCollector( 2150): moved
D/SurfaceFlinger( 1330): Screen about to return, flinger = 0x93320
D/AK8975 ( 1212): Compass Start
W/ApplicationContext( 1330): Unable to create files directory
D/WriteApps( 1330): Error: java.lang.NullPointerException
D/Tethering( 1330): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 1330): interfaceAdded :usb0
D/SettingsAppWidgetProvider( 2264): Widget is from a previous version... Let's update
D/SettingsAppWidgetProvider( 2264): No instances yet... Wait for at least one instance to exist before adding global settings
D/SettingsAppWidgetProvider( 2264): Widget is from a previous version... Let's update
D/SettingsAppWidgetProvider( 2264): No instances yet... Wait for at least one instance to exist before adding global settings
D/Tethering( 1330): InitialState.processMessage what=4
D/Tethering( 1330): sendTetherStateChangedBroadcast 0, 0, 0
W/KeyCharacterMap( 2223): No keyboard for id 65537
W/KeyCharacterMap( 2223): Using default keymap: /system/usr/keychars/qwerty.kcm.bin
I have exactly the same problem with the cm7 With the original Rom everything works fine and i have no problems with the phone
Did you fully wipe between cm6 and cm7?
Sent from my Desire HD using XDA App
pwraggcan said:
Did you fully wipe between cm6 and cm7?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Yes i did, even installed the "Full Wipe"
tpauli said:
I have exactly the same problem with the cm7 With the original Rom everything works fine and i have no problems with the phone
Click to expand...
Click to collapse
i think senseUI doesnt use the proximity sensor..
i am also having the same problem..
it was fine till today, i flashed build #30 however i nadroid backed to old builds (when is was working) and the problem persist.
I suspect my sensor is faulty..
hey go download Light Sensor from market.
Seems like my proximity sensor is working.. shows
lux - 59 in room light
lux - 7 if i use my hand to cover
lux - 137 if under my lamp
lux - 4k if i use my nexus one flash light.
if u are getting the same settings, i suspect there's a bug in CM7.
Related
Bluetooth states
I've been doing some research on the states bluetooth can have on windows mobile 6.1, i have got them from this registry value: HKLM\System\State\Hardware\Bluetooth I have found the following states: Code: 8 = "OFF/NoBrdcst" 9 = "ON/NoBrdcst" 11 = "ON/Brdcst" 13 = "A2DP/NoBrdcst" //bluetooth on before headset 15 = "A2DP/Brdcst" //bluetooth on before headset 25 = "Headset/NoBrdcst" //headset on before bluetooth 27 = "Headset/Brdcst" //headset on before bluetooth 29 = "A2DP/NoBrdcst" //headset on before bluetooth, if a call comes true and the state was 13, the state switches to this state after and just before the call 31 = "A2DP/NoBrdcst" //headset on before bluetooth, if a call comes true and the state was 15, the state switches to this state after and just before the call 57 = "callPrevStateHeadset/NoBrdcst" 59= "callPrevStateHeadset/NoBrdcst" 61= "callPrevStateA2DP/NoBrdcst" 63 = "callPrevStateA2DP/Brdcst" It would be nice if this list could be extended. If you know a state not mentioned above, please post!
*Kick It would be nice if more states are known
HELP - bluetooth SDP connection for Tattoo
Hi, I try to build a program to connect my Tattoo to my laptop use Bluetooth. My tattoo is root and install the ROM tattoo eclair 2.1 when I run the program, the connect go direct to the A2DP profile, how can I change the bluetooth profile? the log is below: 04-27 20:59:56.656: DEBUG/VoiceDialerReceiver(345): onReceive Intent { act=android.intent.action.PACKAGE_ADDED dat=package:qmul.BTconnection flg=0x20000000 cmp=com.android.voicedialer/.VoiceDialerReceiver (has extras) } 04-27 20:59:57.096: DEBUG/dalvikvm(136): GC freed 5101 objects / 283000 bytes in 251ms 04-27 20:59:57.356: ERROR/BluetoothEventLoop.cpp(136): event_filter: Received signal org.bluez.DeviceropertyChanged from /org/bluez/1488/hci0/dev_00_23_4D_E8_02_75 04-27 20:59:57.796: DEBUG/dalvikvm(197): GC freed 11325 objects / 652656 bytes in 128ms 04-27 20:59:59.240: ERROR/BluetoothEventLoop.cpp(136): event_filter: Received signal org.bluez.DeviceropertyChanged from /org/bluez/1488/hci0/dev_00_23_4D_E8_02_75 04-27 21:00:03.406: DEBUG/BluetoothA2dpService(136): Auto-connecting A2DP to sink 00:23:4D:E8:02:75 04-27 21:00:03.406: DEBUG/BluetoothA2dpService(136): connectSink(00:23:4D:E8:02:75) 04-27 21:00:03.416: ERROR/BluetoothEventLoop.cpp(136): event_filter: Received signal org.bluez.AudioSinkropertyChanged from /org/bluez/1488/hci0/dev_00_23_4D_E8_02_75 04-27 21:00:03.456: DEBUG/BluetoothA2dpService(136): A2DP state : device: 00:23:4D:E8:02:75 State:0->1 04-27 21:00:03.456: ERROR/BluetoothEventLoop.cpp(136): event_filter: Received signal org.bluez.AudioSinkropertyChanged from /org/bluez/1488/hci0/dev_00_23_4D_E8_02_75 04-27 21:00:03.496: DEBUG/BluetoothA2dpService(136): A2DP state : device: 00:23:4D:E8:02:75 State:1->0 04-27 21:00:03.506: VERBOSE/BluetoothEventRedirector(1961): Received android.bluetooth.a2dp.action.SINK_STATE_CHANGED 04-27 21:00:03.506: DEBUG/CachedBluetoothDevice(1961): onProfileStateChanged:[] 04-27 21:00:03.516: VERBOSE/BluetoothEventRedirector(1961): Received android.bluetooth.a2dp.action.SINK_STATE_CHANGED 04-27 21:00:03.516: INFO/BluetoothEventRedirector(1961): Failed to connect BT A2DP
Bluetooth issues connecting to Pioneer car head unit (logs attached)
I'm having intermittent connection issues with my Nexus 4 running CM10.1 and my Pioneer Z110BT. The Pioneer has been updated to the latest 2012 bluetooth software. I can pair it OK, and it will work the first time but subsequent connection attempts often fail. Usually I get in the car, the AVIC starts up, and I get a "cell phone has been disconnected" message on the AVIC. If I toggle BT on the phone a couple of times it will maybe connect. Maybe not. Just a pain. Here's what I've done so far: Unpaired/Repaired the Nexus 4 Updated the Z110bt from the v3 firmware to the latest 2012 update (same behavior before/after) I've attached two log files. One that details a couple of failed connections and one that details a successful connection. The phone was not reset during this time, neither was the car stereo. I did toggle BT in between attempts. Any ideas? Thanks, -Brett.
I managed to find what looks to be the point where things go wrong. In the failed connection attempt: ... 02-21 17:15:31.239 13249 13839 D A2dpStateMachine: Pending process message: 101 02-21 17:15:31.249 13249 13839 D A2dpStateMachine: Enter Connected: 101 02-21 17:15:31.249 161 579 I audio_a2dp_hw: adev_open_output_stream: opening output 02-21 17:15:31.249 161 579 I audio_a2dp_hw: skt_connect: connect to /data/misc/bluedroid/.a2dp_ctrl (sz 10240) 02-21 17:15:31.249 161 579 I audio_a2dp_hw: skt_connect: connected to stack fd = 26 02-21 17:15:31.249 161 579 I audio_a2dp_hw: check_a2dp_ready: state 3 02-21 17:15:31.249 161 579 E audio_a2dp_hw: check_a2dp_ready: check a2dp ready failed 02-21 17:15:31.249 161 579 E audio_a2dp_hw: adev_open_output_stream: error : a2dp not ready, wait 250 ms and retry 02-21 17:15:31.249 13249 13249 D A2dpStateMachine: Connection state 00:12:1C:95:A0:46: 1->2 02-21 17:15:31.249 13249 13839 D A2dpStateMachine: A2DP Playing state : device: 00:12:1C:95:A0:46 State:10->11 02-21 17:15:31.259 13249 13249 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.259 13313 13313 D CachedBluetoothDevice: onProfileStateChanged: profile A2DP newProfileState 2 02-21 17:15:31.269 13249 13273 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.269 13249 13249 D BluetoothAdapterProperties: CONNECTION_STATE_CHANGE: 00:12:1C:95:A0:46: 1 -> 2 02-21 17:15:31.279 13249 13879 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.279 13249 13263 D BluetoothAdapterService(1090912536): Get Bonded Devices being called 02-21 17:15:31.289 13249 13269 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.289 13249 13273 D BluetoothAdapterService(1090912536): Get Bonded Devices being called 02-21 17:15:31.299 13249 13263 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.299 13249 13880 D BluetoothAdapterService(1090912536): Get Bonded Devices being called 02-21 17:15:31.299 13249 13273 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.299 13249 13879 D BluetoothAdapterService(1090912536): Get Bonded Devices being called 02-21 17:15:31.309 13249 13880 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.309 13249 13269 D BluetoothAdapterService(1090912536): Get Bonded Devices being called 02-21 17:15:31.309 13249 13879 D BluetoothAdapterService(1090912536): getState(): mAdapterProperties: [email protected] 02-21 17:15:31.309 13249 13263 D BluetoothAdapterService(1090912536): Get Bonded Devices being called 02-21 17:15:31.329 13577 13577 D dalvikvm: GC_FOR_ALLOC freed 272K, 21% free 2662K/3336K, paused 9ms, total 9ms 02-21 17:15:31.339 13577 13577 D dalvikvm: GC_FOR_ALLOC freed 5K, 15% free 2862K/3336K, paused 10ms, total 10ms 02-21 17:15:31.339 13249 13875 W bt-btif : bta_dm_rm_cback:0, status:1 02-21 17:15:31.339 13249 13836 I BluetoothA2dpServiceJni: bta2dp_connection_state_callback ... Click to expand... Click to collapse In the successful attempt: ... 02-21 17:18:55.730 13249 14703 D A2dpStateMachine: Pending process message: 101 02-21 17:18:55.740 13249 14703 D A2dpStateMachine: Enter Connected: 101 02-21 17:18:55.740 13249 14703 D A2dpStateMachine: A2DP Playing state : device: 00:12:1C:95:A0:46 State:10->11 02-21 17:18:55.740 13249 13249 D A2dpStateMachine: Connection state 00:12:1C:95:A0:46: 1->2 02-21 17:18:55.740 161 579 I audio_a2dp_hw: adev_open_output_stream: opening output 02-21 17:18:55.740 161 579 I audio_a2dp_hw: skt_connect: connect to /data/misc/bluedroid/.a2dp_ctrl (sz 10240) 02-21 17:18:55.740 161 579 I audio_a2dp_hw: skt_connect: connected to stack fd = 26 02-21 17:18:55.740 161 579 I audio_a2dp_hw: check_a2dp_ready: state 3 02-21 17:18:55.740 161 579 I AudioFlinger: HAL output buffer size 2560 frames, normal mix buffer size 2560 frames 02-21 17:18:55.740 161 579 I AudioMixer: found effect "Multichannel Downmix To Stereo" from The Android Open Source Project 02-21 17:18:55.740 13249 13249 D BluetoothAdapterService(1091059648): getState(): mAdapterProperties: [email protected] 02-21 17:18:55.750 13313 13313 D CachedBluetoothDevice: onProfileStateChanged: profile A2DP newProfileState 2 02-21 17:18:55.750 161 14767 I AudioFlinger: AudioFlinger's thread 0x40d74010 ready to run 02-21 17:18:55.750 13249 13269 D BluetoothAdapterService(1091059648): getState(): mAdapterProperties: [email protected] 02-21 17:18:55.760 161 579 I AudioFlinger: HAL output buffer size 2560 frames, normal mix buffer size 2560 frames 02-21 17:18:55.760 161 579 I AudioMixer: found effect "Multichannel Downmix To Stereo" from The Android Open Source Project 02-21 17:18:55.760 161 14768 I AudioFlinger: AudioFlinger's thread 0x40d7c2a8 ready to run ... Click to expand... Click to collapse Problem is, I have no idea where to go from here. Suggestions for fixing "E audio_a2dp_hw: adev_open_output_stream: error : a2dp not ready, wait 250 ms and retry"? Thanks, -Brett.
Man, this forum moves quick! Bump for any possible help. Thanks, -Brett.
No One but me is trying to port 4.3 to grouper?
Im working this afternoon on porting 4.3 from the Nexus 4 leak and I got it to bootloop. Im stuck thus far and asking for help. I have included a portion of the logcat that I am stuck on. Before you ask there is no libnetcmdiface.so in the 4.3 base. I realize that it is looking for that lib. Next steps: find that lib in another 4.2.2 ROM and give it a try (who knows right) and also crack the ramdisk open and see what I can see in init.rc I am using AOSP 4.2.2 as my base and the AOSPA 4.2.2 kernel Code: I/Netd (20138): Netd 1.0 starting W/InterfaceController(20138): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20137): ServiceManager: 0x40fc2e30 I/AudioFlinger(20137): Using default 3000 mSec as standby time. I/CameraService(20137): CameraService started (pid=20137) I/AudioPolicyManagerBase(20137): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20137): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20137): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20137): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20137): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20138): MDnsSdListener::Hander starting up D/MDnsDS (20138): MDnsSdListener starting to monitor D/MDnsDS (20138): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died I/ServiceManager( 121): service 'media.player' died I/ServiceManager( 121): service 'media.camera' died I/Netd (20366): Netd 1.0 starting W/InterfaceController(20366): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20365): ServiceManager: 0x40bdaee8 I/AudioFlinger(20365): Using default 3000 mSec as standby time. I/CameraService(20365): CameraService started (pid=20365) I/AudioPolicyManagerBase(20365): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20365): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20365): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20365): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20365): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20366): MDnsSdListener::Hander starting up D/MDnsDS (20366): MDnsSdListener starting to monitor D/MDnsDS (20366): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died I/ServiceManager( 121): service 'media.player' died I/ServiceManager( 121): service 'media.camera' died I/Netd (20578): Netd 1.0 starting W/InterfaceController(20578): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20577): ServiceManager: 0x41db3e30 I/AudioFlinger(20577): Using default 3000 mSec as standby time. I/CameraService(20577): CameraService started (pid=20577) I/AudioPolicyManagerBase(20577): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20577): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20577): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20577): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20577): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20578): MDnsSdListener::Hander starting up D/MDnsDS (20578): MDnsSdListener starting to monitor D/MDnsDS (20578): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died
Why port it if we will get it in the next few weeks? There's already a leak for the n4 so that means we will get it soon. It doesn't really change much. For people that are average users won't notice a difference so there's no reason to port it. Sent from my HTC One
spitfire2425 said: Why port it if we will get it in the next few weeks? There's already a leak for the n4 so that means we will get it soon. It doesn't really change much. For people that are average users won't notice a difference so there's no reason to port it. Sent from my HTC One Click to expand... Click to collapse WHy not port it? Its just for fun dude, relax
timmytim said: Im working this afternoon on porting 4.3 from the Nexus 4 leak and I got it to bootloop. Im stuck thus far and asking for help. I have included a portion of the logcat that I am stuck on. Before you ask there is no libnetcmdiface.so in the 4.3 base. I realize that it is looking for that lib. Next steps: find that lib in another 4.2.2 ROM and give it a try (who knows right) and also crack the ramdisk open and see what I can see in init.rc I am using AOSP 4.2.2 as my base and the AOSPA 4.2.2 kernel Code: I/Netd (20138): Netd 1.0 starting W/InterfaceController(20138): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20137): ServiceManager: 0x40fc2e30 I/AudioFlinger(20137): Using default 3000 mSec as standby time. I/CameraService(20137): CameraService started (pid=20137) I/AudioPolicyManagerBase(20137): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20137): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20137): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20137): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20137): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20138): MDnsSdListener::Hander starting up D/MDnsDS (20138): MDnsSdListener starting to monitor D/MDnsDS (20138): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died I/ServiceManager( 121): service 'media.player' died I/ServiceManager( 121): service 'media.camera' died I/Netd (20366): Netd 1.0 starting W/InterfaceController(20366): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20365): ServiceManager: 0x40bdaee8 I/AudioFlinger(20365): Using default 3000 mSec as standby time. I/CameraService(20365): CameraService started (pid=20365) I/AudioPolicyManagerBase(20365): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20365): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20365): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20365): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20365): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20366): MDnsSdListener::Hander starting up D/MDnsDS (20366): MDnsSdListener starting to monitor D/MDnsDS (20366): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died I/ServiceManager( 121): service 'media.player' died I/ServiceManager( 121): service 'media.camera' died I/Netd (20578): Netd 1.0 starting W/InterfaceController(20578): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20577): ServiceManager: 0x41db3e30 I/AudioFlinger(20577): Using default 3000 mSec as standby time. I/CameraService(20577): CameraService started (pid=20577) I/AudioPolicyManagerBase(20577): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20577): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20577): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20577): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20577): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20578): MDnsSdListener::Hander starting up D/MDnsDS (20578): MDnsSdListener starting to monitor D/MDnsDS (20578): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died Click to expand... Click to collapse Usually porting to a new version (ie 4.2.2 base and 4.3 port) requires some ramdisk mods in the kernel to get it booting, something not possible without the 4.3 sources (I dont think anyway) On any ROM I have tried porting, if it won't boot it always seems to be because of media errors, or the need or a ramdisk mod Sent from my Nexus 4 LTE @1.728 GHz on Stock 4.2.2
That's always why Nexus devices don't seem in such hurry to port new stuff cause we'll get it officially once its announced. Are there any decent changes outside camera and tweaks here and there? Sent from my Galaxy Nexus using xda premium
timmytim said: WHy not port it? Its just for fun dude, relax Click to expand... Click to collapse Can't wait. Hope you solve the problem soon! :fingers-crossed:
Just wait until it comes.
timmytim said: Im working this afternoon on porting 4.3 from the Nexus 4 leak and I got it to bootloop. Im stuck thus far and asking for help. I have included a portion of the logcat that I am stuck on. Before you ask there is no libnetcmdiface.so in the 4.3 base. I realize that it is looking for that lib. Next steps: find that lib in another 4.2.2 ROM and give it a try (who knows right) and also crack the ramdisk open and see what I can see in init.rc I am using AOSP 4.2.2 as my base and the AOSPA 4.2.2 kernel Code: I/Netd (20138): Netd 1.0 starting W/InterfaceController(20138): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20137): ServiceManager: 0x40fc2e30 I/AudioFlinger(20137): Using default 3000 mSec as standby time. I/CameraService(20137): CameraService started (pid=20137) I/AudioPolicyManagerBase(20137): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20137): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20137): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20137): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20137): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20138): MDnsSdListener::Hander starting up D/MDnsDS (20138): MDnsSdListener starting to monitor D/MDnsDS (20138): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died I/ServiceManager( 121): service 'media.player' died I/ServiceManager( 121): service 'media.camera' died I/Netd (20366): Netd 1.0 starting W/InterfaceController(20366): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20365): ServiceManager: 0x40bdaee8 I/AudioFlinger(20365): Using default 3000 mSec as standby time. I/CameraService(20365): CameraService started (pid=20365) I/AudioPolicyManagerBase(20365): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20365): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20365): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20365): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20365): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20366): MDnsSdListener::Hander starting up D/MDnsDS (20366): MDnsSdListener starting to monitor D/MDnsDS (20366): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died I/ServiceManager( 121): service 'media.player' died I/ServiceManager( 121): service 'media.camera' died I/Netd (20578): Netd 1.0 starting W/InterfaceController(20578): Warning (Cannot load library: load_library(linker.cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library I/mediaserver(20577): ServiceManager: 0x41db3e30 I/AudioFlinger(20577): Using default 3000 mSec as standby time. I/CameraService(20577): CameraService started (pid=20577) I/AudioPolicyManagerBase(20577): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf I/AudioFlinger(20577): loadHwModule() Loaded primary audio interface from Grouper audio HW HAL (audio) handle 1 I/AudioFlinger(20577): HAL output buffer size 512 frames, normal mix buffer size 1024 frames I/AudioMixer(20577): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project E/MonoPipe(20577): Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional D/MDnsDS (20578): MDnsSdListener::Hander starting up D/MDnsDS (20578): MDnsSdListener starting to monitor D/MDnsDS (20578): Going to poll with pollCount 1 I/ServiceManager( 121): service 'media.audio_flinger' died Click to expand... Click to collapse Dude if you succeed in doing so... I am here to test it OUT......
Guess this is a moot point. Ok to close this thread Sent from my SAMSUNG-SGH-I747 using xda premium
Audio over HDMI
So,it might be my PC,but it seems there is the same issue with remix os,installed Phoenix OS and I found out that I have no sound from HDMI port,my PC is connected to a Sony smart TV.Does anyone else has the same problem? Sent from my C4100/C5100 using Tapatalk
I have the same problem plus the hdmi image on my smart tv is ~ 3X too large. Dell XPS 15 9530 Win 8.1 (hdmi audio and video work fine on Win 8.1)
Tekram2 said: I have the same problem plus the hdmi image on my smart tv is ~ 3X too large. Dell XPS 15 9530 Win 8.1 (hdmi audio and video work fine on Win 8.1) Click to expand... Click to collapse I have no problem with the screen,I have normlal resolution 1920x1080,no sound only,sound works normal on Windows 10 Sent from my C4100/C5100 using Tapatalk
madprofessorus said: I have no problem with the screen,I have normlal resolution 1920x1080,no sound only,sound works normal on Windows 10 Sent from my C4100/C5100 using Tapatalk Click to expand... Click to collapse I also tried Ubuntu on my laptop and HDMI sound and video worked fine so must be a Phoenix issue.
Tekram2 said: I also tried Ubuntu on my laptop and HDMI sound and video worked fine so must be a Phoenix issue. Click to expand... Click to collapse propably the same problem Remix OS had,hope that they will fix it Sent from my C4100/C5100 using Tapatalk
Here's how to fix audio over HDMI... I am running Phoenix OS in a Virtual Machine, it's on an Asrock H77M mini-itx, 16 GB ram, with an Nvidia 750ti and 2 usb controllers passed through via VFIO. So it's basically an intel 440BX MB with the Nvidia 750ti. I had no audio in either Remix or Phoenix. Fixed it first in Remix, just because root seemed easier at the time. Under /dev/snd I have: controlC0 hwC0D0 pcmC0D3p <----alsa trying to use this one pcmC0D7p pcmC0D8p <-----this is the one I want pcmC0D9p timer 1|x86_64:/ # alsa_aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 Alsa is trying to use pcmC0D3p, which is incorrect My corrected IEC958 levels are below, all these were off prior to the fix: 127|x86_64:/ # alsa_amixer Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',3 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] You may or may not have the same issue as I had. So you need to try all the pcm"s until you find the right one. Go into /dev/snd and move the pcmC0D3p to pcmC0D3p.OLD (you probably need root for this) mv /dev/snd/pcmC0D3p /dev/snd/pcmC0D3p.OLD Then link one of them to pcmC0D3p: ln -sf pcmC0D8p /dev/snd/pcmC0D3p Restart zygote stop; start set all the IEC958 to on: alsa_amixer -c 0 set IEC958 100 unmute alsa_amixer -c 0 set IEC958,1 100 unmute alsa_amixer -c 0 set IEC958,2 100 unmute alsa_amixer -c 0 set IEC958,3 100 unmute Then play something using alsa_aplay, or try youtube. If you picked the right pcm then you will hear audio. If not, reboot and repeat the above by linking the next pcm --> pcmC0D3p. repeat until you find your correct pcm. Once you ID your pcm you can make it permanent (switching HDMI outs on your card may break this). You def need root for this, edit /system/etc/init.sh at the alsa section: esac mv /dev/snd/pcmC0D3p /dev/snd/pcmC0D3p.OLD ln -sf pcmC0D8p /dev/snd/pcmC0D3p # [ -d /proc/asound/card0 ] || modprobe snd-dummy for c in $(grep '\[.*\]' /proc/asound/cards | awk '{print $1}'); do f=/system/etc/alsa/$(cat /proc/asound/card$c/id).state if [ -e $f ]; then alsa_ctl -f $f restore $c alsa_amixer -c $c set Speaker 65% else alsa_ctl init $c alsa_amixer -c $c set Master on alsa_amixer -c $c set Master 100% alsa_amixer -c $c set Headphone on alsa_amixer -c $c set Headphone 100% alsa_amixer -c $c set Speaker 100% alsa_amixer -c $c set Capture 100% alsa_amixer -c $c set Capture cap alsa_amixer -c $c set PCM 100 unmute alsa_amixer -c $c set SPO unmute alsa_amixer -c $c set 'Mic Boost' 3 alsa_amixer -c $c set 'Internal Mic Boost' 3 alsa_amixer -c 0 set IEC958 100 unmute alsa_amixer -c 0 set IEC958,1 100 unmute alsa_amixer -c 0 set IEC958,2 100 unmute alsa_amixer -c 0 set IEC958,3 100 unmute fi
Tekram2 said: I also tried Ubuntu on my laptop and HDMI sound and video worked fine so must be a Phoenix issue. Click to expand... Click to collapse Normally running Phoenix v1.2.3 on my Dell XPS 15 9530 Win 8.1 hard drive and as mentioned HDMI audio doesn't work but just tried Phoenix v2.2.0.207 on a flash drive and HDMI audio works fine. Any suggestions?
external audio problem through 3.5 earphone plzz help me plzzz...I can't fix my audio problem in phoenix os...I have an asus x450c laptop...The internal mic and speaker works fine..but when I plug my earphone it becomes quit...but the internal mic of my laptop works.
Hi tried to use your fix for PrimeOS. Think the problem is the same and fix should work. I can boot in debug mode. can cd to dev folder but not snd. How can I do that? Thank you.
Hi, I've recently managed to install android x86 8.1 r5 on my Dell Latitude E6530 and got video out through HDMI to TV using LVDS-1:d via grub. However I'm unable to get audio through HDMI. Can anyone tell me why? Here is what I get on terminal: x86_64:1 $ su x86_64:7 # cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7e30000 irq 30 X86_64:/ # ls -l /dev/snd total 0 cru-rw--- 1 system audio 116, 5 2020-08-07 00:49 controlC0 crw-rw---- 1 system audio 116, 4 2020-08-07 00:49 hwC0D0 crw-rw---- 1 system audio 116, 3 2020-08-07 00:49 pcmC0D0c crw-rw---- 1 system audio 116, 2 2020-08-07 00:49 pcmC0D0p crw-rw---- 1 system audio 116, 33 2020-08-07 00:49 timer
Same problemsm no sound hdmi But I installed MXpro and suddenly it works. Now I reinstall Phoenics and same problem occure but.... after installing MXPro nothing changedm still no sound this time All this things makes you dissapointed. So tired of loosing time on this BS