This is the story:
I bricked my phone (Elf) because I didn't CID unlock it after installing the Opal 6.1 rom. So when I tried to install the backup ROM I made it got bricked. I read all the threads about how to revive the phone and I can't get any to work.
I can't do the GoldCard since I don't have a working WM phone. So I tried the Wild card unbricker ROM and the phone got worse. Now I only get to the tri color screen without any "RUU" at the top and every time I try to flash another ROM on it it shuts and I get an error message saying something like "Invalind vendor or error in image" etc... Please help me, what happend??? I cant flash any ROM. I cant do hardspl. I can't do anything.
PLEASE HELP ME! Anyone who's familiar to this problem?
Thx in advance!
have tried to flash my phone today , with no success
everytime i try either using hard SPL v1 or Touch IT , i get the same error
get the tricolour screen then says no image , i then try and flash and get connection 262 error
anyone any ideas what i am doing wrong ?
thanks in advance
R
Hey, well you're not the only one with this problem... I have it as well and I've spent a few evenings to find a solution, but nothing worked :S I hope someone can help us out...
heres hoping as i really want the Touch IT rom ...
R
Remove the SD card when flashing this way - that will fix the 262 problem.
Hello
I bought a second hand phone and I want to downgrade it to 6.1 to get rid of all the rubbish that seems to be on there.
My real problem is that it won't sync via activesync 4.5 - it connects but then hangs on "looking for changes" and I am sure it is something to do with the software.
I have hard reset on seveal occasions now and reinstalled activesync several times too.
I have removed the sd card and other small thing I have found on the net to do but nothing seems to get it going.
Can anyone help me?
I know I have to do some flashing but I have never done that.
Please help!!!
if you want to downgrade it, just download a rom from htc's website, get your phone into bootloader mode, connect to pc, wait for the "usb" message to appear at the bottom, and flash the rom.
(only follow onscreen instructions and the process is simple.)
if you dont know how to get into bootloader, there are videos at youtube and guides in the forum.
hope this helps,
Eyal.
Hey guys i need your help badly, I was trying to flash my htc hd touch (blackstone t8282) with Energy.BLACKSTONE.21916.Sense2.5.MaxSense.Dec.22, everything was fine till 44% then it got stuck and now am not able to recover my htc and not able to get any display than "upgrade ROM code error please try again". i tried so many times but its not happening. I am trying it to do from windows 7 32bit machine. and on display am getting following informations too:
BLAC100 32M
SPL-1.54.0000
MICROP-BLACKSTONE (LED) V6
Thanks in advance.
fajarbabu said:
Hey guys i need your help badly, I was trying to flash my htc hd touch (blackstone t8282) with Energy.BLACKSTONE.21916.Sense2.5.MaxSense.Dec.22, everything was fine till 44% then it got stuck and now am not able to recover my htc and not able to get any display than "upgrade ROM code error please try again". i tried so many times but its not happening. I am trying it to do from windows 7 32bit machine. and on display am getting following informations too:
BLAC100 32M
SPL-1.54.0000
MICROP-BLACKSTONE (LED) V6
Thanks in advance.
Click to expand...
Click to collapse
I flashed this weekend on a Win 7 machine with SPL 1.56 Olinex and didnt have any problems.
Have you looked at the Wiki and read up on flashing?
Google the error message you got.
You should find others have had the same problem and managed to sort it.
Take a look at TASK 29 it may help. From what I understand it formats the phone.
fajarbabu said:
Hey guys i need your help badly, I was trying to flash my htc hd touch (blackstone t8282) with Energy.BLACKSTONE.21916.Sense2.5.MaxSense.Dec.22, everything was fine till 44% then it got stuck and now am not able to recover my htc and not able to get any display than "upgrade ROM code error please try again". i tried so many times but its not happening. I am trying it to do from windows 7 32bit machine. and on display am getting following informations too:
BLAC100 32M
SPL-1.54.0000
MICROP-BLACKSTONE (LED) V6
Thanks in advance.
Click to expand...
Click to collapse
Flash the original rom
Hi Thanks for ur valuable suggestions,
But sir am a beginer with htc, yesterday whole day i try to upgrade my phone, but still its showing the same, i tryed to follow uour steps, but am getting error codes 262 & 264. Now am totaly upset..i searched in google but am not able to do, rom updation now going up to 1% after that its diconnecting and generating error, please give me your valubale suggetions, am waiting.I tried RUU_BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe but its showing failed.Please help
fajarbabu said:
Hi Thanks for ur valuable suggestions,
But sir am a beginer with htc, yesterday whole day i try to upgrade my phone, but still its showing the same, i tryed to follow uour steps, but am getting error codes 262 & 264. Now am totaly upset..i searched in google but am not able to do, rom updation now going up to 1% after that its diconnecting and generating error, please give me your valubale suggetions, am waiting.I tried RUU_BlackStone_HKCSL_WWE_1.19.831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe but its showing failed.Please help
Click to expand...
Click to collapse
You can just soft-reset your device and run RUU again. The update process will then continue.
keep in mind At this point, wince is destroyed, but is in upgrade mode it can not recover and the device must be sent back to the customer service center. In this case, you have to flash a new rom code.
plZ! help my Surround bootloader halfBricK problem >> >>
--------------------------------------------------------------------------------
....... iget this lonly messege PD26100 SS-BC (4K) on the red line of the bootloader screen wich known as halfBick thats cuzed (by mistake ) to update my spl 4.xx to older version
so plzz any ideas 2 solve my prob>
note :
my wp7 is working but icant flash any rom
Ditto, you are talking about the single line SPL on the bootloader screen?
yes. that screen!!
http://forum.xda-developers.com/showthread.php?t=1195647&page=67
Keep an eye on that link. I am waiting for someone to post an update about the bootloader.
x7sage7x said:
http://forum.xda-developers.com/showthread.php?t=1195647&page=67
Keep an eye on that link. I am waiting for someone to post an update about the bootloader.
Click to expand...
Click to collapse
Hi
mee too facing same problem yesterday i used that tool and now my surrond phone is half bricked condition.
unfortunately!! Jtag function also not support this phone..
i m software engineer and i really curious to solve this problem.
if i get any progress i will surely post here...
br
Possible halfbricked solution?
I have a little info. Registry path "HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo" contains BootLoaderVersion value. It is rewritable (for example 1.2.2250 instead 3.2.2250 on my phone). Can it evoke HTC OEM Update again? Or, must I change also another values - FirmwareRevision (2250.10.12203.207), RadioHadwareVersion (A.102.0.D4), RadioSoftwareVersion (5.69.09.29a_22.50.50.21U), ROMVersion (1.22.207.03), SoCVersion (2.2.5.0) ? Could not it damage phone more, then halfbrick? But there is one problem - after soft restart original value (3.2.2250.0) is restored on my Gold. May be it is copied from SPL header, or Registry Editor is not working? But rewrited BootLoader version is occured in Setings/about before phone restart. Thanks for answers. Martin
Hi friends. More usable answers about halfbricked problem I have got in thread http://forum.xda-developers.com/showthread.php?p=19330919#post19306499 . Probably cab sender solute it for any devices. M.
This is what appears
Its terrible
Hope someone can help us
HTC surround half bricked plz help.
My HTC surround half bricked,,, in spl mode its showing only one line (sp*****),, and even i cannot enter usb host mode,,, so tried OEM updates via cab sender and gold card method nothing worked,,, so plz can somebody help me to solve this,,, either by OEM cab install,, or some other methods,,,
MY Device config:
HTC T8788
Carrier AT&T
Software Windows phone 7.5
OS Version 7.10.7720.68
Bootloader version: 4.3.2250.0
radio software version: 5.69.09.05a_22_50_50_21H
Device is carrier unlocked .
HTC surround half bricked solution ?
Hi all,,,
MY HTC surround is half bricked,, it shows only one line in spl mode,,, so i tried so many ways to recover it,,, cab sender, goldcard, and via zune,, but nothing worked,, and i saw some one posted, its possible to flash "*.ffu" file on half bricked devices. So I'm searching for the rom .ffu file for HTC Surround AT&T. Please somebody help me.
Thanks in advance.
Hi shiva0386, I have a similar problem. Do you know a solution?
I have a similar problem. Do you know a solution?
help us! plz
hi
sorry guys i searching everywhere ,, but no luck,,, may some xda developers can help us...
I have exact same problem.
Plug phone in it turns on and shows phone and computer.. Bootloader shows one line but cant do anything cause will not connect to computer
Halfbrick Bootloader
Guys,
Please update if anyone have solution for this problem,
facing half brick- single line bootloader problem and not able to recover due to lost usb connection.
Plz ....Help.... Help..... Help......
i do not know about solution but there some thread in forum guide about unlocked developer, interop unlock and root tools, so we can do that and use it normally, only one disadvantage is we can not fully unlocked.
Try it: http://forum.xda-developers.com/showthread.php?p=39259185