Is there a way or a app that can you get you into USB MassStg without rebooting into aMAGLDR? Thanx
For Real?
Plug in usb cable, select disk drive?
meep meep...
WOW
I'm running mdj cyanogenmod 7(v.2.6) a2sd+ and the ony way to get into USB MassStg is to rebooting into aMAGLDR
chochoking said:
I'm running mdj cyanogenmod 7(v.2.6) a2sd+ and the ony way to get into USB MassStg is to rebooting into aMAGLDR
Click to expand...
Click to collapse
really??? you didn't read the first post of that thread, right?
if you can't select disk drive, there is an app on the first page which you can use.
whats the name of the app
chochoking said:
whats the name of the app
Click to expand...
Click to collapse
Use Dual Mount SD or Multimount from Marketplace.
Dual Mount SD works perfect!
Related
Is anyone having trouble with mass storage mode on a mac? Do I need drivers?
Sent from my MB860 using XDA App
No problems here, but I usually leave it in Phone portal so I don't have to eject every time. Didn't have to install any drivers.
xandr115 said:
Is anyone having trouble with mass storage mode on a mac? Do I need drivers?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I AM!
I bought double twist last night just so I could transfer music via WIFI. When I plug the phone in to my Macbook an autorun file mounts and gives me an .exe setup to run. But... Mac's don't like exe's.
My n1 would plug in and mount no sweat - so I'm not sure what needs to be done to this thing.
EDIT:
I should clarify that I have not installed an SD card. I'd like to figure out how to mount the internal 16G flash drive.
mmeads said:
I AM!
I bought double twist last night just so I could transfer music via WIFI. When I plug the phone in to my Macbook an autorun file mounts and gives me an .exe setup to run. But... Mac's don't like exe's.
My n1 would plug in and mount no sweat - so I'm not sure what needs to be done to this thing.
EDIT:
I should clarify that I have not installed an SD card. I'd like to figure out how to mount the internal 16G flash drive.
Click to expand...
Click to collapse
Enable usb debugging in settings>applications .. then connect the phone to your mac and set it to usb mass storage mode..
It should get mounted in finder at that point.
Andrmgic said:
Enable usb debugging in settings>applications .. then connect the phone to your mac and set it to usb mass storage mode..
It should get mounted in finder at that point.
Click to expand...
Click to collapse
seriously... is that all it takes?
Cool - I'll try it tonight.
Thanks.
Thanks!
Strange thing is I did that earlier today but it didn't work... just did a reboot and tried that again... it worked.
Andrmgic said:
Enable usb debugging in settings>applications .. then connect the phone to your mac and set it to usb mass storage mode..
It should get mounted in finder at that point.
Click to expand...
Click to collapse
This is correct.
I have a tmobile htc hd2. (My goal is to get ultimate droid on here)
I unlocked it today
I flashed hardspl using hardspl4 to 2.08.hspl
I then put MAGLDR 1.13 on the phone
NOW, my phone just boots into MAGLDR. I can't get pass it
I know, I'm terrible, I get it.
What should i do? Help!?
Magldr is waiting for the next step, which is likely to be ..
Choose USB flasher and flash cwm, then back into magldr, option 8 ad recovery, and flash a zip rom from SD card
It is " just sitting there" because there is no rom to load.
Okay thanks for the quick response!
Another thing though...my sd card is not being recognized by my cpu. I have to use the sd card in my phone to connect to my computer, I don't have an adapter.
EDIT: *CWM now flashed* SD card problem still exists
"NAND KERNEL OPEN FAILED"
Need a solution for my SD card!!
any help would be greatly appreciated!
swatguym4 said:
Need a solution for my SD card!!
any help would be greatly appreciated!
Click to expand...
Click to collapse
Use MAGLDR or CWM to get access to your SD card click the guide in my sig for full details on it.
you havent explained what problem you get with the sd card, , , ,
boot into magldr, then 8 - ad recovery - then mounts and storage, mount USB storage, connect usb cable. if nothing happens (dont worry about not seeing anything happen on the phone, it wont) then open wmdc (or activesync on older OS) and click settings, connection settings, and UNTICK allow usb connections and try again. It 'should' show up as a removeable drive in mycomputer.
samsamuel said:
you havent explained what problem you get with the sd card, , , ,
boot into magldr, then 8 - ad recovery - then mounts and storage, mount USB storage, connect usb cable. if nothing happens (dont worry about not seeing anything happen on the phone, it wont) then open wmdc (or activesync on older OS) and click settings, connection settings, and UNTICK allow usb connections and try again. It 'should' show up as a removeable drive in mycomputer.
Click to expand...
Click to collapse
My sd card just isn't showing up? When I plug in my phone and it boots in MAGDLR, I can't access my SD card. Like there's nothing there.
*Your suggestion worked perfectly. Thank you very much!*
"boot into magldr, then 8 - ad recovery - then mounts and storage, mount USB storage, connect usb cable"
Is this a problem? ""NAND KERNEL OPEN FAILED""
No, it failed because there is no rom yet.
Just finished the Ultimate Droid flash!! Works perfectly!! Thanks to all that posted!
FIXED! nevermind!
When i use MAGLDR clockwork Recovery to mount the storage,there was no respond with the PC(windows 7)?Help me...what can i do to solve this problem???
Mount usb.
Not storage.
Sent from my HTC HD2 using xda premium
YUp...mount USb...but there's no respond with my PC???
How to fix if the PC is no respond for USB mount for MAGLDR REcovery????
Use a card reader and check if ur usb cable works like it should.
Sent from my HTC HD2 using xda premium
I am using the HTC charger usb cable to mount but there is no respond.Then i try use another phone SAmsung ace to mount usb my PC pop up a storage media,when port back to HTC there was no respond....is there any step i have missed before the MAGLDR or what so that make it like that??????FOr the USB FLASHER it was ok,PC can identify there is my USB port.But for STORAGE there is no respond.thanks
ken_ping said:
I am using the HTC charger usb cable to mount but there is no respond.Then i try use another phone SAmsung ace to mount usb my PC pop up a storage media,when port back to HTC there was no respond....is there any step i have missed before the MAGLDR or what so that make it like that??????FOr the USB FLASHER it was ok,PC can identify there is my USB port.But for STORAGE there is no respond.thanks
Click to expand...
Click to collapse
When in magldr and when you went into AD-Recovery. Did you go to 'Mounts and Storage' And then went down to 'Mount USB storage'? Also if I may ask, what version of CWM Recovery do you have?
Yup when in AD-Recovery i went to Mount USB storage but there is no respond with my labtop...is that a much issue by new rom now???Now i'm using CWM version 3.0.2.5...
I use 4.1 and it works.
Try the magldr usb function.
Sent from my HTC HD2 using xda premium
when connecting phone through usb magdlr it says drives not found what drives do i need?
hawwy said:
when connecting phone through usb magdlr it says drives not found what drives do i need?
Click to expand...
Click to collapse
download HD2 TOOLKIT,it should install all the drivers for you,best tool around
Hello,
I have just installed MIUI.us.ICS-Leo-2.5.25-HWA today. While installing I found that I cannot go to USB storage on SD card through plug in the USB cable.
I am facing this problem from today suddenly. My HTC HD2 USB storage does not connect through USB cable. So I cannot go to SD card storage file. When I connect the USB cable it does not give prompt that "Open USB Storage Now?". If I go to status bar notification to see if the connection made or not and it does not show "USB storage On".
I had to go to recovery mode and then to mount USB storage to install new rom in to the SD card.
Can anyone help me to solve this problem please.
Ronju Khan
Dhaka, Bangladesh.
http://forum.xda-developers.com/showthread.php?t=1685455
did you try using another rom?
hengsheng120 said:
http://forum.xda-developers.com/showthread.php?t=1685455
did you try using another rom?
Click to expand...
Click to collapse
No I did not as the current one is awesome. Do you think changing rom might solve the problem?
ICS Port that you use still doesn't natively support USB Mass Storage.
Use this .apk please.
http://forum.xda-developers.com/attachment.php?attachmentid=819888&d=1324131985
..And follow this page for this ROM.
http://forum.xda-developers.com/showthread.php?t=1389375
Many thanks, it worked perfectly alright
powerofthink said:
ICS Port that you use still doesn't natively support USB Mass Storage.
Use this .apk please.
http://forum.xda-developers.com/attachment.php?attachmentid=819888&d=1324131985
..And follow this page for this ROM.
http://forum.xda-developers.com/showthread.php?t=1389375
Click to expand...
Click to collapse
Many thanks my friend. It worked perfectly alright. Thanks for your help.
please thanks button sir. regards..