Database Users

screen blacking out

Hi new to hd2 android. I have tried multiple roms and and droid builds ,but the problem I am having is after I format my sd card with the sd formatter that I was recommended I transfer the android build to it let it boot up. After that I reboot it and set everything up ,and 99% of the time I will set the phone down and when I go to pick it back up I hit the power/end button to turn on the screen and I get no screen I just get buttons lighting up. Is there anything that I am not doing or doing that is causing this. Please help. I am no stranger to electronics as I modify about everyone of them that I own ,but I can't crack this one. I've been working at it for over a week keep getting the same result. If anyone can help me I would greatly appreciate it. Thanks in advance

vdubbri said:
Hi new to hd2 android. I have tried multiple roms and and droid builds ,but the problem I am having is after I format my sd card with the sd formatter that I was recommended I transfer the android build to it let it boot up. After that I reboot it and set everything up ,and 99% of the time I will set the phone down and when I go to pick it back up I hit the power/end button to turn on the screen and I get no screen I just get buttons lighting up. Is there anything that I am not doing or doing that is causing this. Please help. I am no stranger to electronics as I modify about everyone of them that I own ,but I can't crack this one. I've been working at it for over a week keep getting the same result. If anyone can help me I would greatly appreciate it. Thanks in advance
Click to expand...
Click to collapse
It would help if you added your WinMo ROM/Radio and the Android build this is happening with?

Sorry I am running the elegancia gtx right now with the froyostone sense 3.1.7 and the 2.10.50 radio ,but it has done it with numorous builds

Me too
I have the same problem and i have tried several different builds and am running chuckyRom

I have tried the chucky rom and the ozdroid rom as well with almost every single android build that is half way decent. This sucks I would love this phone to be up and running good. Now I did have the combo of chucky rom with the same radio I have now with the hyperdroid 1.6 and it ran for a few days with no problems ,but the darn battery died quick. I haven't been able to get it to work properly since.

Hit the phone button it will wake up faster
Sent from my HTC HD2 using Tapatalk

The problem is its not turning the screen on at all. No matter what button I hit.

vdubbri said:
The problem is its not turning the screen on at all. No matter what button I hit.
Click to expand...
Click to collapse
U have advanced task killer installed?
Sent from my HTC HD2 using Tapatalk

I'm having the same issue, and yep, Advanced Task Killer is installed and running.

same here
i am having all those same problems and i have tried it with and without ATK

I do not have task killer installed not any version of any of the task killers. If a android build has it in it I go in and uninstall it.

Try changing your sd card. I saw some cards (such as team branded) exhibit that behaviour.

Same problem here tried changing the SD card and same thing happens.

Might have found a fix for this for now. All I did is turn auto rotatescreen in android display settings hope it works for you guys.

I have just started using the newest Energy rom with tmobile usa radio and I was getting the black screen of death. After a bunch of messing around I set it to the compact start menu and turned off sense in windows mobile home options and now the problem went away. YMMV

In the middle of reading all the posts here yestarday I glanced at motoman234's sig and I decided to try his setup and so far twelve hours later still no black screen of death. I don't know if it was my winmo rom that was causing it for me or the radio I was using ,but so far so good. The touch screen seems a little laggy which I wish wasn't there ,but again happy to have a setup that is stable.

[Q] Android Freezing Problem

Hi, I love Android on my HD2. But everytime I install a new build, the same problem is occouring everytime. And I hope that when I install a new ROM the problem will go away, this is not the case.
the problem is this, when I put the phone in lock for a short or long period of time, the phone freezes, and I have to remove the battery and restart in order to get it working again. Now, I have been trying Gingerbread, but the problem still occoured.
I am using NAND to install BTW. Also, I was told to use SETCPU to fix this issue, and set the dropbox to 'smartass' I have done this, and the problem does not go away.
Any ideas? If you can find a solution I will give you loads of thanks!

I sometimes have a slight freeze upon waking phone and cant slide unlocker but its only for a few seconds and fine after that.
Try task29 and then reflash magdlr/rom etc see if it helps in your situation.
Also what apps are you installing each time you install rom, Something may be causing issue on your phone.

The problem is not that the touch screen frozen, but that the phone will not wake, sometimes it has the blinking green LED at the top of the device.
Thanks.

TheATHEiST said:
Also what apps are you installing each time you install rom, Something may be causing issue on your phone.
Click to expand...
Click to collapse
I install TypoClock And SetCPU. Also, some marketplace apps like quadrant and advanced taskiller.

Bumpety-bump-bump.
Anyone have a solution?
D:

i take it you've also upgraded your radio version as well? when i first fiddled around with android i had the famous sod or sleep of death..wherein the device wouldn't wake up. i ugraded the radio to 2.15 and that fixed the problem. haven't had a freeze ever since.

I have the same problem. Dose any one have a solution for it?

I dose have a solution, as stated before, upgrade your radio.

Ya sounds like an outdated radio. Upgrade to 2.12.50 or 2.15.50

Robson said:
i take it you've also upgraded your radio version as well? when i first fiddled around with android i had the famous sod or sleep of death..wherein the device wouldn't wake up. i ugraded the radio to 2.15 and that fixed the problem. haven't had a freeze ever since.
Click to expand...
Click to collapse
Thanks

Upgrade the radio. It worked for me

[Q] screen turns white - loses colors! why?

have you got the same problem?
the screen loses colors and get like white - but you still see the android theme, but in extreme white/pink-ish theme.
how to fix that, exept turning on and off the phone? and why does it do like that?

I have the same problem, buy it happens from time to time
im using radio 2.10.xx, witch ver do you use?

Same here.Radio 2.15,using NexusHD2 V1.9G.
Every couple of weeks.

Android in general is like that for us. Remember android wasn't "meant" for our device so there are still some things to work out.
Just restart your HD2s.

also got it from time to time...
it happened when the screen turn off and on too fast.
the only way to bring the color back is a reboot.

exactly the same to me....what's happening?
i use on hd2 the 2.2 froyo nand rom

Ive had (and posted) about this issue in past, its happened only about3-4 times to me so nothing really for me to get worries about. Just curious on what actually causes it and is it a sign of anything other then a driver/software failure?

got this problem ,too. but it started on my device with winmo6.5 cwf´s. i dont think, its a problem with android. iam on radio 2.10...

Same here ... more frequently though ... maybe once or twice a day.
Android HyperDroid GBX v11

Like a previous poster said this happens for me when the screen is turned off and on very quickly, especially while in a call. I think, for a moment, proximity sensor tries to turn on the screen and then off again.

Leo 512 only ?
Yes, system too big or big ! get other build

Me to had this problem using MIUI rom
Decided to do a full phone erase and SD format.
Seems to have fixed it

[Q] andriod on htc hd2 struck on black screen after a call

Hi
I have a HTC HD2
and i installed andriod nand rom on it with the following things
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.12
i installed almost 10 andriod roms and find the same problem
after making or receiving a call screen goes into black screen and hangs up. i have to reboot the device by removing the battery. i would appreciate if any one can provide me the solution to fix this problem as i love andriod roms.
thank you

mohammedmazher said:
Hi
I have a HTC HD2
and i installed andriod nand rom on it with the following things
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.12
i installed almost 10 andriod roms and find the same problem
after making or receiving a call screen goes into black screen and hangs up. i have to reboot the device by removing the battery. i would appreciate if any one can provide me the solution to fix this problem as i love andriod roms.
thank you
Click to expand...
Click to collapse
I am facing this only when battery is bellow 15%. If this is the case then just charge it before it goes to 15%.
If that's not the case then you can try installl MAGLDR v1.3
Do you have this issue in Froyo or Gingerbread ROMs? or in both? What version of CWM are you using?

I have the same problem on MIUI since after approximately 1.3.18 (cutover from Froyo to Gingerbread). Also have this problem on CME DHD2 Compact.
It is also an issue if someone tries to call me.
Sometimes, if I try waking the phone from sleep (power button) and it hits the black screen, and I wait long enough, it will wake. But again, the only real fix I know is pulling the battery.
I am running MAGLDR 1.13
Also, another fix that works sometimes is plugging in the phone into a power source e.g. laptop USB port

It's something about light sensor, when you put your screen into a strong light it would be turn "unblack" again. I don't know how to fix it, is this a problem with this hardware because it's broken or my version of LEO doesn't support NAND full functionaly.
Begging for answer!
i know about my poor english

I have this problem too.. running latest Hyperdroid rom by pongster (magdlr version) and it's driving me crazy. Sometimes phone wakes up normally after a call like it shoud, sometimes is stuck with black screen for few minutes, hours even (although i can't wait that long so i pull out battery)..
Back on WinMo everything worked normally, so it's not an hardware issue with proximity/light/whatever sensors
Is there any fix out yet? I googled and searched this forum a lot and haven't found nothing much helpful, ony a couple of threads with bunch of people with same problem like me. An option for disableing those sensors would be just as good, i've tried few apps for keeping the screen awake and none of them actually worked..
Any help is appreciated.. thanks in advance.

Bump!
Anyone? :/

I have the same issue - running Gingerbread, MAGLDR 1.13
Very annoying cause everything else works super.
Temporary solution i use is to use headset / handsfree. Then there is no problem.
So experts on XDA, we are begging for a fix for this!

I have the same issue since first Android roms and never found a real solution for the problem.
Instead i found a bypass that works for me reasonably well (99% of the cases the screen turns on after a call).
I installed the following 2 applications that wakes up my screen after the call (install then enable each one):
1. Screebl - https://market.android.com/details?id=com.keyes.screebl.lite
2. Modified version of SpeakerShake - http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
I suspect this issue is somehow related to hardware failure in light sensor. Installing these programs solve this problem for me.
Also take a look on the following thread:
http://forum.xda-developers.com/showthread.php?t=835127

I have had the same thing happen to me but only around 2 or 3 times in a about 3 months of usage. Had it on both CM7 and MIUI Gingerbread ROMs regardless of battery percentage.
MAGLDR 1.13

Some users experience this using SetCPU
if you have a profile for screenoff and it's set to the lowest frequency, try to set the frequency to something above 500 MHz.
If you have smartass set as governor, then even setting the frequency to it's highest (without OC) during screenoff wouldn't change anything in battery performance, but the device will wake up faster.

Your setup works for me as well - until we`ll see a fix for it this will do

Quiethinker said:
I have the same issue since first Android roms and never found a real solution for the problem.
Instead i found a bypass that works for me reasonably well (99% of the cases the screen turns on after a call).
I installed the following 2 applications that wakes up my screen after the call (install then enable each one):
1. Screebl - https://market.android.com/details?id=com.keyes.screebl.lite
2. Modified version of SpeakerShake - http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
I suspect this issue is somehow related to hardware failure in light sensor. Installing these programs solve this problem for me.
Also take a look on the following thread:
http://forum.xda-developers.com/showthread.php?t=835127
Click to expand...
Click to collapse
Yup, this worked for my setup to - thanks!

hi guys ! i can`t realy figured out how to set it . shall i use only one app or both ? and wich settings should be ?

xanthrax said:
hi guys ! i can`t realy figured out how to set it . shall i use only one app or both ? and wich settings should be ?
Click to expand...
Click to collapse
(install then enable each one):
Click to expand...
Click to collapse
Incearca Sanity app, cauta pe Market, mie aceste doua nu mo ajutat

with me is so but only if I navigation (Navigon) and to have someone call me and then left the screen black and I can not make

try to change the kernel. that works for me

hey guys! i found the solution goin through the market!
download an app called "Sanity" theres a free version in the regular android market.
go to the settings > general > check "Reverse Proximity" (This will give you some warning about not using it if you DONT have a buggy proximity sensor). Check it anyways. Then go back to preferences then click "Proximity" scroll down and uncheck Turn off screen and leave leave the Turn on screen checked. this will force your phone to stay on during calls so that it never has to go through the proximity phase of calls this no more black screens. Hope this was helpful ^_^

Thanks!
I had this problem aswell. MIUI & Cyanogen mod were the ROMs I was using, and this problem started occuring after a few months use (my screen is also damaged from a fall, so maybe the sensors are a little damaged as well).
When I installed the WinMo 6.5 stock ROM again, everything was normal, except that my screen still turns black during calls BUT I can activate it again by pressing the power button.
Now I installed android again and the Screebl app (enabled it) and I have the same functionality! The only problem that remains is that my screen still turns black during calls, so I have to answer with the phone button and putt down phone with the power button. Still beats having to remove the battery though .
If someone has a fix for the black screen, it would be more than welcome!
But, thanks a million for the Screebl app tip! I can use my phone again .

papaganz said:
Thanks!
I had this problem aswell. MIUI & Cyanogen mod were the ROMs I was using, and this problem started occuring after a few months use (my screen is also damaged from a fall, so maybe the sensors are a little damaged as well).
When I installed the WinMo 6.5 stock ROM again, everything was normal, except that my screen still turns black during calls BUT I can activate it again by pressing the power button.
Now I installed android again and the Screebl app (enabled it) and I have the same functionality! The only problem that remains is that my screen still turns black during calls, so I have to answer with the phone button and putt down phone with the power button. Still beats having to remove the battery though .
If someone has a fix for the black screen, it would be more than welcome!
But, thanks a million for the Screebl app tip! I can use my phone again .
Click to expand...
Click to collapse
I also try with WinMobile and the problem was still there ...
I think the sensor is broken ....
I will bring my phone to service ... and when i take it back I will tell you whether it is repaired

Solution
I had the same problem with Android roms on my HD2. I saw in an other thread a member (z-o-r-r-o-, thanks btw) wrote "just clean dust on the screen, where sensor is situated". This looked like a joke to me, but it's not. On a review of the phone I found the place of the proximity sensor. This is on the top of your screen next to the speaker, on the left if you look at the screen. I just took off the protection layer of the screen and cleand the sensor and the problem was solved. So I cut of a bit from the protection layer so that the sensors arn't touched by anything.
I think the problem is that this sensor is much more sensitive with android roms.
Hope this works for you to.

[Q]HD2 Boot issue

Hi everyone,
I've got some problems with my good old HD2 but I don't really understand what happened and I'd like to know if some people could help me.
My HD2 was running successfully under WP7/Android, but I wanted to go back to WinMo 6.
It was very hard to flash it (never had so much problem), even with the official rom : long to boot, then animated HTC bootsplash freezing, reboot, displaying first bootsplash without red-written informations... frozen.
Only one solution : wait for a long time without the battery then it was successfully working. But if I had to reboot : freezing in the same way. (with official and custom roms).
Unfortunately, Marketplace were down the day I installed WinMo, so unabled to install my apps.
So I wanted to try new tango roms > 1E FATAL HIT.
If I let the phone cooling down it works again, but if I'm surfing the web my HD2 comes really warm (hard to touch the bottom without burning my fingers), restarts himself and > FATAL HIT...
Any idea ?
(Still the same sd card)
It's been a long time since he last overheated that way.
When I received it, I had some troubles to first charge it. The led turned orange for 1or2 minutes and then went off. I used a fan under the phone and it charged for the first time. Since then only overheating while flashing or under first wp7 roms. No warranty anymore.
I'm sure that the hd2 temperature makes the Fatal hit.
Thank you for your ideas

Nevralgeek said:
Hi everyone,
I've got some problems with my good old HD2 but I don't really understand what happened and I'd like to know if some people could help me.
My HD2 was running successfully under WP7/Android, but I wanted to go back to WinMo 6.
It was very hard to flash it (never had so much problem), even with the official rom : long to boot, then animated HTC bootsplash freezing, reboot, displaying first bootsplash without red-written informations... frozen.
Only one solution : wait for a long time without the battery then it was successfully working. But if I had to reboot : freezing in the same way. (with official and custom roms).
Unfortunately, Marketplace were down the day I installed WinMo, so unabled to install my apps.
So I wanted to try new tango roms > 1E FATAL HIT.
If I let the phone cooling down it works again, but if I'm surfing the web my HD2 comes really warm (hard to touch the bottom without burning my fingers), restarts himself and > FATAL HIT...
Any idea ?
It's been a long time since he last overheated that way.
When I received it, I had some troubles to first charge it. The led turned orange for 1or2 minutes and then went off. I used a fan under the phone and it charged for the first time. Since then only overheating while flashing or under first wp7 roms. No warranty anymore.
I'm sure that the hd2 temperature makes the Fatal hit.
Thank you for your ideas
Click to expand...
Click to collapse
Maybe you should use task29, wipe the whole system clean, and flash lighter roms such as hyperdroid or any cyanogenmod or MIUI rom you like. Download a task manager too and see what is eating up your memory. Hope it helps.
Sent from my HD2 using XDA

adil1508 said:
Maybe you should use task29, wipe the whole system clean, and flash lighter roms such as hyperdroid or any cyanogenmod or MIUI rom you like. Download a task manager too and see what is eating up your memory. Hope it helps.
Sent from my HD2 using XDA
Click to expand...
Click to collapse
Hi,
thanks for your reply.
I did a few t29 in order to flash back winmo and then magldr, but it didn't change anything.
In fact, even the first boot in wp7 to configure the phone makes it reboot and the phone is a bit warm in only 2 minutes

Nevralgeek said:
Hi,
thanks for your reply.
I did a few t29 in order to flash back winmo and then magldr, but it didn't change anything.
In fact, even the first boot in wp7 to configure the phone makes it reboot and the phone is a bit warm in only 2 minutes
Click to expand...
Click to collapse
It's a hardware problem which you really can't fix unless you're willing to take the phone apart. It's a fairly dangerous process and it's likely that unless you have a good amount of knowledge about the subject you'd break your phone completely.

Oh no I was fearing that kind of answer...
But why when WinMo or Android are running, it works well ?
The hardest part is booting (after a few restart freezing and errors), then it's rather ok.

Nevralgeek said:
Oh no I was fearing that kind of answer...
But why when WinMo or Android are running, it works well ?
The hardest part is booting (after a few restart freezing and errors), then it's rather ok.
Click to expand...
Click to collapse
I'm not really sure, but the phone should never heat up enough to freeze, even when in intensive use Sorry, but I don't think your HD2 has much life left in it

Thanks for your reply.
I think it happens every summer since I have it (2years) but I'd be sad to loose my hd2. I'm really proud to have bet on it, sure that it would be the best phone of all time, and it really is.
Brought me the best version of Windows Mobile ever, then Android, and finally Windows Phone.
I don't think there will be any other phone that could do that. It was powerfull (as much as the ones that are released today), and was out just in the good year (when htc was switching to Android and WP but using the HD2 as a reference, making us able to run everything.

dual boot
Hello people
I have a dual boot on my HD2,can somebody tell me how to get just android boot,because i'm having problems with the android boot...error messages are poping out every second
what i have to do just to boot android?
TNX

Nevralgeek said:
Hi,
thanks for your reply.
I did a few t29 in order to flash back winmo and then magldr, but it didn't change anything.
In fact, even the first boot in wp7 to configure the phone makes it reboot and the phone is a bit warm in only 2 minutes
Click to expand...
Click to collapse
I had the same problem, you can try this:
1. Remove the battery from the HD2 and check the middle pin of the row of 3 that should touch the Battery connections. This middle pin is probably offset to the front or even croocked.
2. Gently bend the middel pin back and straight up. (be careful not to break it)
3. Check if all pins are straight up now.
4. Gently reinstall your battery and recharge to full.
With me this happens every few months when I f** too much with the battery and it gets extremely hot. After this bending back its all OK and no heat problem anymore.