Database Users

I dump my problems unto you!

ugh, here we go:
I am running cyanogenmod 4.04 with the latest recovery. I have the hard spl. I am not themed. I am using auto apps2sd with partions.
Soooo, this was working well until I had to take out my sd card for something. As soon as I did, the whole phone froze up, so I restarted. The first 'alert noise' that usually occurs after startup happpened at the end of the android screen. After this I was bombarded by a HELLUVA lotta force closes. I mean, all over the place. In these was included advanced launcher which I had my home set as as default. They would all loop, and I couldn't do anything. Oddly enough, the notification bar was still working, and I was able to view and answer an email!
My question is as follows:
1: what did I do wrong
2: what can I do to fix it.
-
For several reasons, I would really like to avoid wiping at the moment, so if there are any alternatives, I'd appreciate it.

1) took out sd card
2) fix_permissions in recovery

evilkorn said:
1) took out sd card
2) fix_permissions in recovery
Click to expand...
Click to collapse
Then I can put it back in and reboot?
EDIT: I did the above and nothing interesting happened.
It might be worth noting, however, that I rebooted without the sd card, installed ahome lite, and then didn't set a default home. I was able to use 'home' with the sd card in, and that works fine, as well as the apks packaged in cm (dialer, gmail, alarm clock ect.)

So basically it's like this with Apps2SD... say you are running Windows on your desktop, but you have all your programs installed to an external hard drive, you have a whole lot of programs up and running (not to mention you have your pagefile split across your drives - dalvik-cache), and you rip that external hard drive off. What do you expect to happen? Major system failure.
When you are running Apps2SD, the only time it is safe to remove your SD card is when the phone is NOT booted or booting. Meaning, it has to be off or in either the bootloader or recovery modes.
You may have to format the EXT partition of your SD card, wipe, and reflash your ROM.

daveid said:
So basically it's like this with Apps2SD... say you are running Windows on your desktop, but you have all your programs installed to an external hard drive, you have a whole lot of programs up and running (not to mention you have your pagefile split across your drives - dalvik-cache), and you rip that external hard drive off. What do you expect to happen? Major system failure.
When you are running Apps2SD, the only time it is safe to remove your SD card is when the phone is NOT booted or booting. Meaning, it has to be off or in either the bootloader or recovery modes.
You may have to format the EXT partition of your SD card, wipe, and reflash your ROM.
Click to expand...
Click to collapse
****.....let me see if I an access my sd card with this adapter, hold on.

ugh, put the card in and reboot into recovery and go to the console and type 'fix_permissions', you have to have cyan recovery or use the one with more options like the RA, link in sig, i think there is even an option for it and you don't have to type it in console.

How to really wipe everything

Why do I still see stuff in /sdcard after wiping and ODIN-ing JFD and re-wiping? How do I really turn my phone back to factory?
I'm having some flakiness with some of the new ROMS, and I am pretty sure it has nothing to do with the ROMs. Specifically, I have a problem where my phone will wake up after receiving a text message and never go back to sleep. Also, several times my phone will boot into a situation where it cannot see any towers (almost like airplane mode). Just general flakiness. So, I want to put my phone back in its newborn, fresh out of the box state and start over. However, I still see all of the files and directories in /sdcard that were in there before I wiped (from recovery). Strange.
Skip

I actually did this earlier today because of a major problem with the music player. I transfered all my backups to my computer then went to Settings>SD Card and Phone Storage then scrolled down to Phone Storage and selected Format SD Card. After I formated the card, I installed JFD with Re-Partition checked. After Odin did its thing, I let the phone reboot and copied a rom to my internal card and the Clockwork update.zip. Installed the update zip through stock recovery and the rom through Clockwork.

Hmm, that didn't work for me. Sure, my external sd card is clean now, but /sdcard still has all the same files in it. Is it safe to just rm -rf * in the /sdcard directory?
For instance, I just odin-ed (with repartition checked) and I still have external_sd showing (a leftover from Obsidian 4.2). I also see busybox, TitaniumBackup and several other folders. I'd like it all to be gone so I can be sure of my re-installation process.

Don't format the SD card, format the phone storage.

Yeah, you formatted the wrong one. Were you on Axura 2.0.5? I had that issue also for some reason... might have something to do with BlackFroyo on top of it?
Just went to Axura Final and am not noticing it...

If you want to wipe the whole phone including the internal memory card. Go to the market and download SGStools. Once installed go to secret codes and find Hard Reset. Just make sure to a make back up of both internal and external cards, cuz one never knows.

@s15274n, no I was not using Axura.
I did see that I formatted the wrong one the first time. Np, I had backed everything up to my computer. Anyway, I formatted both internal and external storage, re-Odin-ed, and then flashed Obsidian 4.2. I have already seen when I miss a call, my phone display does not go back to sleep, even with the new ROM. I guess I will Odin again and this time just stay on stock, or maybe just stick with the Bionix ROMs. If my phone can't play nicely with these new ROMs when flashing on top of a fresh Odin JFD, then I guess it just wasn't meant to be.

Evo got screwed up by putting in a new SD card

i transfered all my data to my new sd card. shut the phone off and put the new card in. booted it. i got a text. tried to reply and wouldnt let me. phone shut off and wouldnt boot. i went into recovery to clear cache and dalvik cache. rebooted and now its like its on a fresh new rom no apps no nothin. but its EXTREMLY SLOW now. 5x slower than my htc hero. and its freaking out.
i tried nand back up.. nothin. i tried everything.. wont stay on long enough for ruu.
so any ideas to help me fix this.

I usually format the new sdcard with the phone. Then I copy onto it, except for lost.dir which does not get over written.
Use the settings to unmount the sdcard, then reformat it. Copy from the old sdcard on to the new. Hopefully that will do.

ok i will try that in a sec. thank you

Did you get one of those cheap memory cards from China? If so, that may be the problem. I tried one of those cheap SD cards when I first got my phone and it worked all kinda ways messed up while it was in there. Try putting the old card back in. If you see it works with no problems, then it's your SD card.

the phone is still glitched out even with the old card
EDITwilly900wonka after i did that process it worked. probably not a smart move copying the file over as well. i just did a exact copy with all the files. nand .androidsecure and everything else on the lines of movies music and photos

kyhassen said:
the phone is still glitched out even with the old card
Click to expand...
Click to collapse
Weird. Try wiping cache and dalvik cache,. If not, hopefully you have a NAND backed up that you can restore to.

Once you get your EVO back up and running I would advise you to run AVG Anti-Virus to speed your phone back up. Also install a custom ROM, this will most defiantly speed up your EVO.

xXViRuSXx said:
Once you get your EVO back up and running I would advise you to run AVG Anti-Virus to speed your phone back up. Also install a custom ROM, this will most defiantly speed up your EVO.
Click to expand...
Click to collapse
i been using custom roms. but i was on mikfroyo then myn warm. then MIUI which i loved but it wont accept it now. so im off to something new. i tried koin elite. but that sucked for me...

I made the mistake of putting a blank SD card into my phone then formatting it with the phone. I lost all my apps etc. Even transferring all the files back to the phone didn't fix it. What I found you should do is boot into recovery before you ever boot into the phone. Then format and create the needed partitions, then mount the SD card while in recovery and move the files to the card. Wipe cache and dalvik and reboot. Phone acts like you never changed the card. From my experience its the most problem free method
Sent from my (insert daily ROM name here) Evo 4g

Whats the best SD card for the EVO?
Say I want a 16GB card.
Does the evo support class 6 and 10?
Can I then use the MikFroyo A2sd? Or do I need to start with a wipe and a fresh install of MikFroyo?

ive had this happen during an sdcard switch as well. weird since I wasn't using apps2sd. i had to restore my nandroid.
Sent from my PC36100 using XDA Premium App

OneStepAhead said:
ive had this happen during an sdcard switch as well. weird since I wasn't using apps2sd. i had to restore my nandroid.
Click to expand...
Click to collapse
it sucks. but oh well.
Nandroid FTW!!!!!!!!!!!!!!

had that problem on my first 2 card switches the realized that what works for me is taking old card out, putting new one in(i do not open anything)just go to format the sd card then put the old one back in plug phone to pc in usb drive and opend my pc hit folder properties on my phones drive and select view hidden files. then copy all the info into my pc. then close all open windows on pc and change my phone back to charging only then unplug turn off the phone and remove and replace sd card with new one, turn on again plug to pc in usb drive and copy all the files i copied into the new sd card and hit replace on all the repeated folders. that method works flawlessly for me every time

To Partition SD card and Flash KINGDOM Guide :D

1. BACK UP YOUR MEMORY CARD TO YOUR COMPUTER AS THIS WILL ERASE EVERYTHING!!==== THIS IS IMPORTANT
2. Reboot into recovery (Use Amon RA 2.3==NOTHING OTHER THEN AMON )
3. Select =Partition sdcard=
4. Select =Partition SD=
5. Set swap to 0 (you can leave this at 32mb, I did.)
6. Ext2-size = 2048 (2GB - the 3.0 packages eat up a lot of the internal memory, you can adjust this lower, but 2GB is recommended if you have a lot of apps I did 2 and a half)
7. Select upgrade ext2 to ext3 ===DO NOT UPGRADE EXT 3 TO EXT 4=====
8.. Now go back and mount your SD card
9.. Place all your files back on the card. Also add the ROM, PRI 1.77 downgrade is recommended you will have WAKE ISSUES IF YOU DON'T.
10. If you have to flash the PRI, do so now and reboot. If not, move on.
12. Wipe everything you normally would prior to flashing a new rom.
13. Flash Kingdom
14. First boot takes about 3 to 5 mintues to get started.
15. ENJOY THE ROM FOLKS
MAKE SURE YOU HAVE THE LATEST OTA RADIOS.
THIS IS FOR ALL THE PEOPLE WHO WERE HAVING ISSUES WHEN THEY PARTITIONED THERE SD CARDS AND THERE PHONES COULDN'T BOOT THE ROM.
THOSE THAT HAD THE ISSUES MUST OF UPGRADED EXT 3 TO EXT 4 WHEN THEY PARTITIONED. IT'S NOT THE ROM IT WAS USER ERROR PEOPLE.
IF YOU DID UPGRADE EXT 3 TO EXT 4 YOU WILL NOT BE ABLE TO BOOT THE ROM YOU GET STUCK AT THE BOOT SCREEN AND IT WILL HANG. ONLY WAY TO FIX THAT IS TO WIPE THE SD CARD AND RE PARTITION.
DO NOT BLAME THE DEVS FOR SOMETHING YOU DID WRONG. THANKS
THERE IS A GFX FIX THAT SMOOTHS THE ROM OUT. GET IT THEN AFTER THE ROM IS INSTALLED REBOOT TO RECOVERY AND WIPE CACHE AND DAVLIX CACHE FLASH AND YOUR ALL GOOD. I WILL POST THE ATTACHMENTS TONIGHT FOR YA.
IF YOU ARE ON THE NEWEST KINGDOMS SUCH AS 6/22 OR GREATER NO NEED FOR THE GFX FIX. HOPE YOU GUYS LOVE KINGDOM.
I am not liable if you brick your sd card I don't know anyone that has so have fun folks.

Hope this helps stop people from hammering virus and dogging the rom's.

It's funny how people on the kingdom thread ask for directions but never look in the general threads to flashing kingdom or browse the threads on there for the info. Kingdom works fine.

reaper24 said:
It's funny how people on the kingdom thread ask for directions but never look in the general threads to flashing kingdom or browse the threads on there for the info. Kingdom works fine.
Click to expand...
Click to collapse
part of the issue is that as a noob to rooting and flashing we are overly excited and are full of questions. i love the kingdom roms and hate that i can not ask questions in the thread regarding any issues i may be having or even a simple question like how to properly flash it. ive attempted to use the search thread and still its confusing. so i appriciate it when i come across something like this that teaches us noobs how to do it. a little instruction goes along way. ive tried to navigate the xda site on my own and have actually learned more through thread such as this than i did going solo! anyway thanks for all the help hope to pay it forward someday

thesabri said:
part of the issue is that as a noob to rooting and flashing we are overly excited and are full of questions. i love the kingdom roms and hate that i can not ask questions in the thread regarding any issues i may be having or even a simple question like how to properly flash it. ive attempted to use the search thread and still its confusing. so i appriciate it when i come across something like this that teaches us noobs how to do it. a little instruction goes along way. ive tried to navigate the xda site on my own and have actually learned more through thread such as this than i did going solo! anyway thanks for all the help hope to pay it forward someday
Click to expand...
Click to collapse
Happy you figured it out mayne. Thank you for reading. To many new folks were bad mouthing virus rom due to not reading things. Happy you got what you needed bro.

So I'm getting a new 32gb card and was wondering if I have to put everything from my old card on if I want to start fresh. I think the only thing I'd want move back is my latest nandroid backup.
Also do you still recommend to repeat step 7 three times?
Sent from my HTC Evo using Tapatalk, probably while driving.

DarthBelan said:
So I'm getting a new 32gb card and was wondering if I have to put everything from my old card on if I want to start fresh. I think the only thing I'd want move back is my latest nandroid backup.
Also do you still recommend to repeat step 7 three times?
Sent from my HTC Evo using Tapatalk, probably while driving.
Click to expand...
Click to collapse
Ya u will have to put all your old stuff on new card. No step 7 just once don't upgrade ext 3 to ext 4 or it will Fuc% ur day up lol.

step 8 says to mount sd card. ive done this but when i go back and check it still says mount sd card does this mean i did not properly mount it?
system rom 367mb/19mb free
internal 446/225mb free
sd 29.5gb/28.6gb free
a2sd 2.26gb/2.07gb free

thesabri said:
step 8 says to mount sd card. ive done this but when i go back and check it still says mount sd card does this mean i did not properly mount it?
system rom 367mb/19mb free
internal 446/225mb free
sd 29.5gb/28.6gb free
a2sd 2.26gb/2.07gb free
Click to expand...
Click to collapse
Just mount it that one time copy all your stuff back and your good to go

reaper24 said:
Just mount it that one time copy all your stuff back and your good to go
Click to expand...
Click to collapse
It usally does that for some reason everytime you wipe through amon when your getting ready to flash a new rom nothing to worry about never had any issues. I only mounted it once copied my stuff flashed rom.

nice tut
but how do u find out if u have partitioned it successfully
cuz i checked it with titanium backup and its saying that i only have 300+ mb space in total as my a2sd drive

flex360 said:
nice tut
but how do u find out if u have partitioned it successfully
cuz i checked it with titanium backup and its saying that i only have 300+ mb space in total as my a2sd drive
Click to expand...
Click to collapse
I use the applications in the menu. When you check everything . Titanium doesn't read the same as the applications. I have 220 free ram left. Internal 210 left

You are partitioned you won't get a low mem message saying your outta ram.

Thanks man! now i using sense 3.0 in my old evo 4g... wahooo!!!

When I click Mount SD....nothing happens.
Do I reboot?

mcwups1 said:
When I click Mount SD....nothing happens.
Do I reboot?
Click to expand...
Click to collapse
It should of mounted go back to it and see if it is mounted. Then once it's mounted copy all your old stuff back to the SD wipe if you need to like you would prior to flashing a rom. Then have at it

reaper24 said:
It should of mounted go back to it and see if it is mounted. Then once it's mounted copy all your old stuff back to the SD wipe if you need to like you would prior to flashing a rom. Then have at it
Click to expand...
Click to collapse
I mount in recovery?
I upgraded ext2 to ext3, says it's complete, then I went down to "Mounts", then "Mount /sdcard"......did nothing but change to "Unmount /sdcard".
Nothing else has come up.
Am I suppose to just reboot after the "ext2 to ext3" is complete?

Just enabled "USB-MS" and my SD card came up.
I don't know if that's something I should have done a while ago, but it looks like it's transfering all my .zips and my Titanium Backups to the SD card.
Maybe add that option to the tutorial for dopes like me who didn't have the USB-MS function enabled!

mcwups1 said:
I mount in recovery?
I upgraded ext2 to ext3, says it's complete, then I went down to "Mounts", then "Mount /sdcard"......did nothing but change to "Unmount /sdcard".
Nothing else has come up.
Am I suppose to just reboot after the "ext2 to ext3" is complete?
Click to expand...
Click to collapse
It's mounted man .

mcwups1 said:
Just enabled "USB-MS" and my SD card came up.
I don't know if that's something I should have done a while ago, but it looks like it's transfering all my .zips and my Titanium Backups to the SD card.
Maybe add that option to the tutorial for dopes like me who didn't have the USB-MS function enabled!
Click to expand...
Click to collapse
Ya after u mount you enable usb from the main menu of amon copy ur stuff back over. Your good to start flashing just make sure you wipe like you normally would prior to flashing a rom.
Downgrade pri then flash rom and so on

G4 Plus w/ LineageOS stuck at booting screen

So I installed LineageOS about 4 months ago or so and out of nowhere the phone just turned itself off and wouldn't boot, it goes past the motorola screen into the LineageOS booting screen, and it just keeps loading and loading, I can access TWRP, and I tried installing an older version of LineageOS and wiping the cache and dalvik, that seemed to have worked but the home button wouldn't work and some core system thing kept crashing and warning me on the screen and I decided to reboot, and now I'm stuck at the booting screen loading forever again, basically I'm trying to NOT wipe the phone data UNLESS I'm able to backup my apps with titanium backup or something like that; so since I managed to make it boot once maybe it ain't as bad as I see it, so yeah here hoping to get some options to fix it.

dante0397 said:
So I installed LineageOS about 4 months ago or so and out of nowhere the phone just turned itself off and wouldn't boot, it goes past the motorola screen into the LineageOS booting screen, and it just keeps loading and loading, I can access TWRP, and I tried installing an older version of LineageOS and wiping the cache and dalvik, that seemed to have worked but the home button wouldn't work and some core system thing kept crashing and warning me on the screen and I decided to reboot, and now I'm stuck at the booting screen loading forever again, basically I'm trying to NOT wipe the phone data UNLESS I'm able to backup my apps with titanium backup or something like that; so since I managed to make it boot once maybe it ain't as bad as I see it, so yeah here hoping to get some options to fix it.
Click to expand...
Click to collapse
With titanium backup its possible to restore data from a nandroid backup.
Did you installed exactly the same rom over the actual one again? Did you tried wipe cache and art?
Make a backup of system, data, boot and save it to your computer just in case.

strongst said:
With titanium backup its possible to restore data from a nandroid backup.
Did you installed exactly the same rom over the actual one again? Did you tried wipe cache and art?
Make a backup of system, data, boot and save it to your computer just in case.
Click to expand...
Click to collapse
When the phone got stuck at the loading screen I tried installing an old LineageOS rom, that initiated with the errors I mentioned, and when I did that I wiped the cache and dalvik/art cache as well, and now I've tried deleting them again many times and it doesn't seem to work, and quick question, the nandroid backup is basically doing a backup of what you told me, system, data and boot, right? Would that save all apps and their data, let's say, a progress in a game, or all settings exactly like I left them on an app.
Also I don't know if it's me, but I keep deleting some data from my SD card and it just keeps reappears again, even tho I'm seeing them getting deleted, same with pasting new stuff on my SD card, I'm doing all this thro my PC with ADB, tho pasting and deleting stuff on the internal storage works just fine.

Yes, a nandroid backup from your system/data partition saves all your additional apps with settings.

strongst said:
Yes, a nandroid backup from your system/data partition saves all your additional apps with settings.
Click to expand...
Click to collapse
Yeah it says my SD card is on "Read-only" and can't complete the backup, according to some thread it's a FAT error and I gotta mount the SD card on my PC and fix the error thro windows, but I have no SD card reader, meanwhile I'll wait for other answers until I find an SD card reader.

The issue was most likely caused by updating LineageOS many times over and over again eventually causing a corruption, that and my micro SD dying and just being read only made it worst, so yeah, I'd recommend erasing cache, dalvik and system every few months to update LineageOS, well I wouldn't take this that seriously, since I don't really know that much, but yeah, phone is working just fine now, just installed everything from scratch and google helped me restore my apps.

dante0397 said:
Yeah it says my SD card is on "Read-only" and can't complete the backup, according to some thread it's a FAT error and I gotta mount the SD card on my PC and fix the error thro windows, but I have no SD card reader, meanwhile I'll wait for other answers until I find an SD card reader.
Click to expand...
Click to collapse
The isssue you are talking about(sd read only mode). Im facing this problem and have done each and every method possible to give write access to sd card.
Well i can access the data(like can put anything i want in it) but can't modify it(copy, move, delete and even format). I looked for way arounds and tried my own method(even risked the data on sd) but no good comes out of it.
Im using rr and not lineage so we are on different boats in the same river.
If you get any solution pls inform me ans ill try it.

DgnrtnX said:
The isssue you are talking about(sd read only mode). Im facing this problem and have done each and every method possible to give write access to sd card.
Well i can access the data(like can put anything i want in it) but can't modify it(copy, move, delete and even format). I looked for way arounds and tried my own method(even risked the data on sd) but no good comes out of it.
Im using rr and not lineage so we are on different boats in the same river.
If you get any solution pls inform me ans ill try it.
Click to expand...
Click to collapse
Some sdcards become read only over time, had also 2 of them which had those issues. See reviews on Amazon. It's a known problem of the SD card itself. Try to format your card with pc and check if it's writable again, otherwise it's dead.

strongst said:
Some sdcards become read only over time, had also 2 of them which had those issues. See reviews on Amazon. It's a known problem of the SD card itself. Try to format your card with pc and check if it's writable again, otherwise it's dead.
Click to expand...
Click to collapse
Thanks for the concern and yeah i know that it is a problem with sd cards.
The thing i was saying that i literally tried each and every method formatting from pc to even twrp. I even used cmd for it and as a out come non of them work.
Well sd card is not dead. I can move, copy thing in it the problem comes after that. I cant delete or then move from sd card to other location. Its like read only compact disk(it will clear the idea what im talking about). My sd card is working as a read only cd does.

DgnrtnX said:
Thanks for the concern and yeah i know that it is a problem with sd cards.
The thing i was saying that i literally tried each and every method formatting from pc to even twrp. I even used cmd for it and as a out come non of them work.
Well sd card is not dead. I can move, copy thing in it the problem comes after that. I cant delete or then move from sd card to other location. Its like read only compact disk(it will clear the idea what im talking about). My sd card is working as a read only cd does.
Click to expand...
Click to collapse
That's what I mean: they become read only. Search on Google.

I had the same issue. I tried reinstalling Linage OS, clearing the cache, etc. But what finally resolved it was clearing the data. So the issue was corrupted data that was keeping the device from booting.