[Q] vibrant stuck at cwm red - Vibrant General

I tried searching thoroughly, but nothing matched my problem and no solution worked. I hope someone out there can help me with this:
My vibrant had TMO's Froyo with Team Whiskey's Bionix V and Dragon voodoo OC v3.1 kernel
I used clockwork 2.5.1.3 to flash Bionix V 1.2 with voodoo.
I didnt disable voodoo (first time i ever did that, being told that I didnt need to by friends and numerous forums.)
Phone rebooted, showing Dragon's logo, then a strange split-second blip occured and I was back into clockwork red. I tried rebooting and the same thing happened.
Now, my phone reboots only into clockworkmod red (can still access clockwork green by "apply sdcard:update.zip").
Cannot odin because usb is no longer working for some reason (which means I cannot adb either).
I can only access download mode through clockwork 2.5.1.3 (advanced ->Reboot to Download Mode).
when I plug in to recharge, it shows the battery with the loading circle in the center, then the phone reboots to cwm red.
After getting frustrated, I foolishly started applyig all wipes and attempted to install all zip files i had. all files say E:cant mount yadda yadda.
I'm at a total loss. I dont think I bricked because the phone turns on and I can access red and green clockwork.
Please, someone help...I dont wanna throw the phone from the roof only to get a hardware locked one from TMO's warranty, lol.

dsilver981 said:
I tried searching thoroughly, but nothing matched my problem and no solution worked. I hope someone out there can help me with this:
My vibrant had TMO's Froyo with Team Whiskey's Bionix V and Dragon voodoo OC v3.1 kernel
I used clockwork 2.5.1.3 to flash Bionix V 1.2 with voodoo.
I didnt disable voodoo (first time i ever did that, being told that I didnt need to by friends and numerous forums.)
Phone rebooted, showing Dragon's logo, then a strange split-second blip occured and I was back into clockwork red. I tried rebooting and the same thing happened.
Now, my phone reboots only into clockworkmod red (can still access clockwork green by "apply sdcard:update.zip").
Cannot odin because usb is no longer working for some reason (which means I cannot adb either).
I can only access download mode through clockwork 2.5.1.3 (advanced ->Reboot to Download Mode).
when I plug in to recharge, it shows the battery with the loading circle in the center, then the phone reboots to cwm red.
After getting frustrated, I foolishly started applyig all wipes and attempted to install all zip files i had. all files say E:cant mount yadda yadda.
I'm at a total loss. I dont think I bricked because the phone turns on and I can access red and green clockwork.
Please, someone help...I dont wanna throw the phone from the roof only to get a hardware locked one from TMO's warranty, lol.
Click to expand...
Click to collapse
You should be able to Odin..try these steps
Remove battery and put it back in (to make sure phone is powered off)
Disconnect USB from phone and Open Odin
While holding both Volume buttons...insert USB back into phone
Phone should boot into Download mode
Odin that sh*t

I did all that, i dont get the COMM port in Odin, so I did "adb devices", and got "list of devices attached" with no list. When I insert the USB cable, I dont even hear the usual windows tone acknowledging the new device. This leads me to believe that the USB on the phone is not working. tried it with 2 different cables on 2 different phones using all USB ports.

dsilver981 said:
I did all that, i dont get the COMM port in Odin, so I did "adb devices", and got "list of devices attached" with no list. When I insert the USB cable, I dont even hear the usual windows tone acknowledging the new device. This leads me to believe that the USB on the phone is not working. tried it with 2 different cables on 2 different phones using all USB ports.
Click to expand...
Click to collapse
do you have the correct drivers? try installing the drivers from this thread
http://forum.xda-developers.com/showthread.php?t=728929
and try again

I've used odin in mid Jan, so I know the drivers are up to date.
Here's what will freak you out even more. if I remove the battery while the phone is plugged in (to the wall or to the computer), the phone shuts off. BUT, if the phone is off with the battery in and I plug the phone (again, to wall or comp), the battery indicator with loading circle shows up. before I know how much battery I have left, the phone automatically boots into red cwm without me touching anything. I can post a video on youtube if it will help at all.

dsilver981 said:
I've used odin in mid Jan, so I know the drivers are up to date.
Here's what will freak you out even more. if I remove the battery while the phone is plugged in (to the wall or to the computer), the phone shuts off. BUT, if the phone is off with the battery in and I plug the phone (again, to wall or comp), the battery indicator with loading circle shows up. before I know how much battery I have left, the phone automatically boots into red cwm without me touching anything. I can post a video on youtube if it will help at all.
Click to expand...
Click to collapse
i see
did you make a Nandroid prior to flashing??

I did, but I get:
E: Can't mount /dev/block/mmcblk0p1 (or /dev/bloc
k/mmcblk0)
(Device or resource busy)
Can't mount /sdcard
Do you think I royally screwed my phone?

dsilver981 said:
I did, but I get:
E: Can't mount /dev/block/mmcblk0p1 (or /dev/bloc
k/mmcblk0)
(Device or resource busy)
Can't mount /sdcard
Do you think I royally screwed my phone?
Click to expand...
Click to collapse
No not really
i've seen worse get recovered
Getting Odin to work is your best bet
you say the phone can go into download mode...but if Odin can't recognize it then there's 1 of 2 things goin on:
1. The correct drivers are not installed
2. You arent using the up-to-date Odin

Odin is the way to go, I used odin and got the stock vibrant files from google, it is not a rom its the original stock vibrant files
Sent from my SGH-T959 using XDA App

Ok,
reinstalling driver v1.3.450.0 from the link you sent me.
using Odin 1.7
Its not that odin cant recognize, its that the usb appears to not be working except to show the empty battery with the loading circle. I'll try again, and make a video so you can see whats going on.

Try rebooting your computer also. Sometimes when my computer will not connect to my phone a reboot fixes the problem.

Just to re-itterate.
After you have re-installed drivers, reboot your PC.
Then open Odin up.
Then pull your battery on you phone, put it back in, hold only the volume buttons and plug the usb cable in. (Just in case, take out SD CARD and SIM card, older version of odin didn't like those being in either)
Load PIT and JFD stock rom.
Flash.
Double check the following.
You need to make sure ODIN is already up and running first. Also make sure that you are not using a USB extender or HUB as odin often does not like those. If you are using a desktop, plug the cable directly into the USB port in the back of the PC.
If you are using a LT, try different ports as not all USB ports provide full power on all laptops.

The PC reboot is important. I have seen ADB get stuck in the background and nothing works right. Let us know how it goes.
I can tell you that you are not completely bricked. As long as you are getting into CWM you are still ok.

Related

Help, my phone is now a mess! - no odin, bad clockwork

My phone is running DL30 based Blackhole 4.01 with the DL09 modem. When I try to plug my phone into a computer, the phone detects the computer, but the computer does not detect the phone.
- The phone starts charging
- The phone says "USB Debugging Connected"
- The computer does nothing
- adb devices lists no devices
- same thing in download mode, the computer doesn't see the phone
I have tried on OS X and booted into Windows XP.
I have no idea how to handle this. The one thing I tried was installing the Stock/rooted DL30 rom instead of Blackhole, but that didn't seem to fix and I went back.
To make matters worse, assuming that everything in ROM Manager is basically safe, I accidentally installed orange clockwork today and I cannot figure out how to get back to a working clockwork. The All ClockworkMod Recoveries option in ROM Manager does nothing - they all say download error.
Wow. If anybody can help with any of this, that would be great. Thanks everyone.
Did you install the proper samsung drivers onto the computer.
Edit: Also did you try to Odin, the title indicates no odin, but your explanation doesnt say so. (Open Odin, remove battery, hold down volume and insert usb cable)
what do you mean "onto my phone?" My Windows system has samsung drivers and OS X were both previously able to connect, use odin, etc. I don't know when it stopped working.
Yeah, odin doesn't work because the computer never detects that the phone is attached.
BatsShadow said:
what do you mean "onto my phone?" My Windows system has samsung drivers and OS X were both previously able to connect, use odin, etc. I don't know when it stopped working.
Click to expand...
Click to collapse
Sorry, meant computer.
What do you mean odin stopped working, your explanation doesnt say anything about odin as my edit in above post.
What I mean is that I used odin to install DL09. After that, I don't recall every attaching to my computer, but when I tried recently to install EB01, it no longer works. Sometime after flashing DL09, my phone is no longer detected by computer.
Im saying does odin detect the phone, not the computer.
You can odin the updated CWM (non orange) from here:
http://forum.xda-developers.com/showthread.php?t=942021
no, odin does not see the phone.
Have you put your phone in debugging mode
Sent from my SCH-I500 using XDA App
Read the first posy pleaseeee...
okubricko said:
Have you put your phone in debugging mode
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
Are you sure Odin doesn't work?
Check USB settings on your phone. My rom gives me media player mode and mass storage mode. Don't have my cable with me to test if media player mode stays hidden from the pc.
wynalazca said:
Are you sure Odin doesn't work?
Check USB settings on your phone. My rom gives me media player mode and mass storage mode. Don't have my cable with me to test if media player mode stays hidden from the pc.
Click to expand...
Click to collapse
Odin uses download mode with phone off.. What would this matter?
Sent from my Rocking dj05, themed superdark w/o swype mod, voodoo 5, with custom boot and shutdown.. With premium xda app.
I was IRL with OP trying to solve this a few days ago. It's not that improper/no drivers are installed, the computer literally does not detect that there is a device connected to that USB port. lsusb on Linux turns up just the controllers and root hubs, and devmgmt.msc on XP does not show anything attached at all, even after a manual hardware scan. adb shows absolutely nothing. My Captivate does show up on all the same scans, regardless of the USB mode (Kies/mass storage/media player/what have you.)
He has tried this on multiple computers, so individual ports/USB controllers/drivers/OS bugaboos have been effectively ruled out.
My thought is that between your last flash, OP, and now, your physical microUSB port on the phone is damaged. If you no can haz insurance, I'd say you're SOL.
FYI: The phone does not say "debugging connected" when plugged into the wall. I think the my USB connector is damaged or something. I may consider seeing if I can get it repaired, or I may just wait until I can get a different phone that's better supported by manufacturer (and therefore by the mod community)

my phone is bricked i think

so i tried to update my phone to EC05 thru odin with the sydicaterom 1.1 (i was on 1.0.2) so i downloaded the modem and the odin package on this website for it and when i tried to flash it (was in download mode on my phone) it went stright to fail in odin and then my phone reset and now when i turn on my phone or plug it into the computer or wall charger it comes up with a little picture of a phone and then 2 dots and then a ! and then a little computer . and when i try to hold the power,cam,volume down buttons it does the same the only thing i can do on my phone is enter download mode thru power and holding 1 what can i do i am stuck. when i plug my phone into the computer so odin can read it nothing happens even when i put it in download mode my 2 computers wont read my phone
icebear8 said:
so i tried to update my phone to EC05 thru odin with the sydicaterom 1.1 (i was on 1.0.2) so i downloaded the modem and the odin package on this website for it and when i tried to flash it (was in download mode on my phone) it went stright to fail in odin and then my phone reset and now when i turn on my phone or plug it into the computer or wall charger it comes up with a little picture of a phone and then 2 dots and then a ! and then a little computer . and when i try to hold the power,cam,volume down buttons it does the same the only thing i can do on my phone is enter download mode thru power and holding 1 what can i do i am stuck. when i plug my phone into the computer so odin can read it nothing happens even when i put it in download mode my 2 computers wont read my phone
Click to expand...
Click to collapse
Your phone is probably not bricked if you can enter download mode.
Have you tried a different cable??? Also, for now - just to see if your phone is in bad shape, I would try to download a stock DI18 or something. Maybe the ROM image you have is corrupted.
tryin to find a different cable right now my kids went and hid my usb cable for my phone and using my gfs phone usb (which is a LG) but until then this is all i got lol but yea i did try different roms and the DI18 and EB which i was on and odin wont even get my phone to pop up
icebear8 said:
tryin to find a different cable right now my kids went and hid my usb cable for my phone and using my gfs phone usb (which is a LG) but until then this is all i got lol but yea i did try different roms and the DI18 and EB which i was on and odin wont even get my phone to pop up
Click to expand...
Click to collapse
Why would you odin in the first place when we have the flashable.zips... Much easier. Just go back into download mode and reodin and you should be just fine.
i found the right cable but odin still wont find my phone =/. thats the problem is that odin wont do anything because it wont see my phone in download mode i DID get into CWM and tried reinstalling my roms and stuff but when it gets done installing whatever i want to install it restarts and goes to the whole phone and computer icon
Look through the general section in this forum and go to the how to video thread. It will show you how to properly use odin. There is also a video showing you how to update to ec05. Id post the link but I'm on my phone.
Sent from my SPH-D700 using XDA App
icebear8 said:
i found the right cable but odin still wont find my phone =/. thats the problem is that odin wont do anything because it wont see my phone in download mode i DID get into CWM and tried reinstalling my roms and stuff but when it gets done installing whatever i want to install it restarts and goes to the whole phone and computer icon
Click to expand...
Click to collapse
This happened to me and I had to pull my battery and start up in download mode again. Try that.
did what that guide said to do i put in download mode and plug my cable in and still no go it will not connect to computer nothing comes up in odin. i tried takin battery out and sd card and putting them back in and no go (also did with out battery in the phone)
I thought my phone was bricked it was stuck, I had pulled the battery out several times and nothing, so I left the battery out for a couple of hours and when I put the battery back in it started working, not sure why just happy it did, word to the wise sprint wont work on the phone unless you have everything back to stock, I tried before leaving the battery out, before I got to sprint the phone wouldnt do anything let it off over night to take to sprint to try and get a new one I figured since it wont boot at all they will never know, but as luck would have it when I got to sprint after giving up on the phone and leaving it off over night, the sprint rep turns it on and it goes straight to clock work :0, its worth a try
Did you install the samsung drivers?? Did you try different micro usb cables?
Sent from my SPH-D700 using XDA App
tried different cables, different computers, different drivers, still nothing
Good news: As long as you can enter Download mode on your phone, it should not be bricked
Bad news: there are many reasons a computer would not see a phone in download mode
1) wrong/bad drivers
2) bad cable
3) bad/flakey USB port on computer
4) bad/flakey usb port on phone
my tip: With the phone in download mode, instead of trying to use ODIN, download the EB13 SWUpdate exe and try using that. It will wipe the phone just like ODIN, but is a lot less tempermental, and almost foolproof compaired to ODIN, and will retore the phone to stock EB13, at which point the EC05 update can be copied to the SD Card and then run to update to EC05

Rooted Evo will not connect to PC

I rooted my Evo with unrevoked3 a few months ago and since then (or sometime after) my phone will not connect to my PC. It will charge but that's it. I checked off the ask me every time I connect option, it's set to mount as disk drive. I am using the stock usb cable that came with the phone. I tried hard resetting, data wiping back to factory default. Still won't connect. Tried reinstalling HTC Sync. Doesn't recognize my phone being plugged in. I want to flash my phone back to stock so I can bring it back to Sprint but I can't bring it back rooted and I can't unroot it without using the PC. I have Googled and Googled all over but can't find an answer. I did a search here and there are similar problems but no solutions that have worked for me. Could it be the cable? It is in good condition as is the phone. Maybe the USB port on the phone? Those went bad on all my Blackberries. I'm sure this problem is expressed frequently but a response would make my day.
roblacroix said:
I rooted my Evo with unrevoked3 a few months ago and since then (or sometime after) my phone will not connect to my PC. It will charge but that's it. I checked off the ask me every time I connect option, it's set to mount as disk drive. I am using the stock usb cable that came with the phone. I tried hard resetting, data wiping back to factory default. Still won't connect. Tried reinstalling HTC Sync. Doesn't recognize my phone being plugged in. I want to flash my phone back to stock so I can bring it back to Sprint but I can't bring it back rooted and I can't unroot it without using the PC. I have Googled and Googled all over but can't find an answer. I did a search here and there are similar problems but no solutions that have worked for me. Could it be the cable? It is in good condition as is the phone. Maybe the USB port on the phone? Those went bad on all my Blackberries. I'm sure this problem is expressed frequently but a response would make my day.
Click to expand...
Click to collapse
I am assuming you have a windows based PC.
Do you have any device driver conflicts in your windows Device Manager? I'd start there. Your computer wouldn't properly reconize your phone if you have some sort of conflict or you don't even have the right drivers installed.
Broken usb is a known issue with EVO, something about how it is soldered onto the motherboard. Are you running a custom ROM or kernel?
Have you tried mounting it in Recovery? You can always use a MicroSD card adapter to transfer files. I just use Dropbox.
You can unroot without your PC. Just download everything on your phone.
Download the S-On tool from Unrevoked. Flash it in Recovery. Check to make sure phone is S-On
Download the PC36IMG.zip restore to your phone, there is a thread with it in Development. Use Astro/Root Explorer to move the PC36ING.zip to the base of your SD card.
Go into HBoot and it will recognize it. It'll ask if you want to update, say yes. Let it sit and do its thing.
There is a guide in q&a about unrooting
Sent from my PC36100 using XDA Premium App
Yes, Windows based PC.
So I downloaded the S-On tool, moved it to the root of my card with Super Manager, then flashed it. Says S-On at boot. I rebooted my phone, moved the PC136zip to the root of the sd card. Rebooted with down vol + power and it checks for pc136zip but doesn't ask anything. I tried zipping it in recovery and it says bad. I tried another download site and did the same thing, doesn't recognize it upon hboot, so I tried zipping from sdcard, selected it, it quickly said some text about updating then nothingness. How do I know if it unrooted?
Edit: Also, I checked my device manager on my pc but it didn't show anything wrong.
Install terminal and type su
You will get permission denied if not rooted.
I have a working PC36IMG.zip in my Dropbox, if you need it tell me and I'll PM you a link
if u think ur phone is broke cuz u cant connect to pc after u rooted it, it isnt broke at all. my phone did the same thing after i rooted it. I don't remember exactly cuz it was a while ago, but u may have to turn on usb debugging in settings before it will recognize it. also u can go into recovery and mount usb to write to it
It might have to do with the drivers you have to install when you run unrevoked. It has been a while, but I am pretty sure I had to install a special USB driver to run unrevoked.
Sent from my PC36100 using XDA Premium App
I had this happen to my phone last week after I used my computer to root two other peoples phones.
It makes no sense really, but while in recovery I connected to the computer to move a few files to the phone, and after that it was able to connect whether in recovery or not.
See if your phone can make the connection while in recovery.
Ok, so I brought the phone to Sprint after trying a different USB cord and they said the port is damaged. My new phone arrived today but I need to get my phone back to stock ASAP. I got it back to S-On but when I attempt the pc36img flash it says...
SD Checking....
Loading... [PC36DIAG.zip]
No image!
Loading... [PC36DIAG.nbh]
No image or wrong image!
Loading... [PC36IMG.zip]
Then the black bar loads.
Then it says.
Main Version is older!
Update Fail!
Do you want to reboot device?
I hit yes.
I still have SuperUser Permissions.
I've downloaded a few different pc36img.zip from different pages and this happens every time.
Edit: Probably wondering how I did this without a USB. I bought an SD Card reader and transferred everything through PC.
Try this.
1. Plug your usb cable into the computer.
2. Plug your usb cable into the phone.
3. Wait and listen for the little sound that tells you that the computer sees it.
4. Unplug your USB cable from the phone and wait about 2 seconds.
5. Plug the USB cable back into the phone, listen for the sound, then look at the computer monitor.
On mine, I have to do this to make the autorun window pop up running Windows Vista.
Shot in the dark, but thought it might help.
Noise doesn't happen. USB port is damaged, noise will never happen.
On the upside,
(I don't have 8 posts yet or I would show the download image) Updated version of PC36IMG.ZIP that worked. Just rename to pc36img and it unrooted my phone.
I'm having this same problem. Now, In this case, I hear the noise. Then a second double noise (like when you unplug the usb) This happens whether I am in recovery or not. Also, oddly enough, the thing works on my mac. It's done this through several different ROMS Right now I'm using synergy (which is great btw). I'm really at a loss here. Anyone got any other ideas? Like where I can find it in device manager. There are like 9 "root usb" devices
*edit* Also, I'm using window's XP proffessional. I've tried some trouble shooting but nothing is really working. Also it's being assigned a disk letter when connected, during the short time (like less than a second) when the disk pops up it says removable disk. I timed it and it's being assigned H, but it's being ejected almost immediately.
I think it has something to do with power being supplied in the cord. Maybe something to do with kernal? I dunno. But I plugged it into a usb port in the back of my pc, and it read it : /
roblacroix said:
I rooted my Evo with unrevoked3 a few months ago and since then (or sometime after) my phone will not connect to my PC. It will charge but that's it. I checked off the ask me every time I connect option, it's set to mount as disk drive. I am using the stock usb cable that came with the phone. I tried hard resetting, data wiping back to factory default. Still won't connect. Tried reinstalling HTC Sync. Doesn't recognize my phone being plugged in. I want to flash my phone back to stock so I can bring it back to Sprint but I can't bring it back rooted and I can't unroot it without using the PC. I have Googled and Googled all over but can't find an answer. I did a search here and there are similar problems but no solutions that have worked for me. Could it be the cable? It is in good condition as is the phone. Maybe the USB port on the phone? Those went bad on all my Blackberries. I'm sure this problem is expressed frequently but a response would make my day.
Click to expand...
Click to collapse
Alohaz I've had this happen 5 different times and it turned out to be the custom hboot needed for unrevoked after reverting back to original no could recognize phn
unrevoked mess up my 3 evo.
all diag port gone away.
i cant program anymore with qpst,cdma ws etc.
how to fix??

[Q] Upgraded to CM10, lost all usb charge / data connectivity!

Hi,
So I upgraded from cm7.2 to 10 on my defy green lens. After a long and difficult upgrade, almost everything works - except any functionality of the usb port...
I'll jump right into the real deal: without usb connectivity, I cannot try to flash other SBFs to fix it! I can enter the bootloader screen just fine (says 09.10 on top, I believe that the last SBF I flashed was 3.4.2_179-002 , as recommended, before I rooted it, 2ndinit, and sucessfuly installed cm10) and the phone recognizes when I plug in a usb cable to it. but the computer always shows up a "usb device not recognized" error, and I tried on two machines, winxp/win7, and several different usb cables. I read some threads about crashing drivers between rsdlite and different tools motorola made; I never installed any of that junk but just to be on the safe side I removed all drivers and started fresh. still no go.
______________(That's the problem, now I'm just going to give more information about it)______________
The phone does not charge off a computer nor from a wall charger, with an assortment of different usb ports, cables and chargers. when connected to a computer (whether the phone is on or off) a "usb device not recognized" message comes up, on both windows xp/7 (different machines.) Seldom, when connected to wall charger, I can get the battery icon to show charging for about a second, (after a restart and plugging in to the pc briefly beforehand.) If I'm so lucky to make that happen, either it goes off in about one second, or it will change statues from charging to not charging several times very rapidly and then stay on not charging.
If the phone is off and I connect it, the white led sometimes come on, and then the phone comes on- presumably to go into battery charging screen, but instead it boots up normally. (this may be the correct behavior with this rom. idk.)
If you care for more information, let me elaborate about what I mean by "After a long and difficult upgrade":
I previously upgraded to cm10 (30/7/2012) CM10-20120730-NIGHTLY-mb525.zip,
but downgraded shortly after, back to 7.2. (I decided to wait for something a bit more functional)
Back then both the upgrade/downgrade went fine. This time I got into a bootloop (or stuck on bootscreen) after updating to 26/03/2013 God's version (oops I meant Quarx's version.)
Trying to use my nandroid backup for 7.2 I got a md5 mismatch and even after generating a new md5 file I couldn't restore /data.
Moving on. using CWM I tried installing some kernels (kernel-froyo-222-179.zip, and same thing but signed,),
then a fixed sbf (not full) 3.4.2_177-Fixed.NORDIC_DEBLUR.sbf,
and a very crappy sbf JRDNEM_U3_2.26.0_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B5TEL02A.0R_USAJORDANTELSTRA_P033_A017_M008_HWp3_Service1FF.sbf
** this one almost gave me a heart attack, after successful flash defy black screened with no LED indications. I was able to work my way into the bootloader and flash another SBF with rsdlite, without any indications from the device. lucky me.
Then I flashed the sbf I mentioned above and that's how I eventually got into cm10.
I can't even downgrade to stable cm7.2. Tried flashing a fresh install through CWM (wiping everything before and after, of course) and ended up stuck on boot screen. I don't know if it has anything to do with CG numbers or what, but I really can't figure out why CM7.2 wouldn't boot on the same SBF CM10 is booting fine right now.
I can't also share the SD card through CWM. (-> device not recognized)
I'm losing my marbles over here. Been working on it for two whole days and can't think of anything else I can try out... If I flashed the wrong rom using CWM I might get locked out because bootloader won't be any help!
:crying: cry for help... thanks :fingers-crossed:
Have you tried installing adb and the motorola drivers so you can try to communicate with the device?
Thanks for your word zero gravity!
Well, I thought that since "usb device not recognized", and since it shows up as unknown device under device manager (currently it disappears and reappears every 3 seconds, but I think this is a new behavior) I automatically assumed that I couldn't get proper communication with it! I guess I got to do some reading about adb commands any help with it would greatly be appreciated (No worries though I know how to google )
http://forum.xda-developers.com/showthread.php?t=1241935
Here's a simple guide for adb. Hopefully you can get some sort of communication to flash your stock sbf and start over again.
So, even though I have the drivers installed (Motorola_End_User_Driver_Installation_4.9.0_32bit.msi_.zip, and also installed MotorolaDeviceManager_2.3.9.exe,) Android SDK Tools installed, then I tried adb devices - nothing comes on.
by enabling ADB over network I can adb connect to the phone through wifi and go into shell. but I can't see how I can debug the buggy usb interface with network access.
Also tried starting the adb service through recovery - no go, won't show up.
(I plugged in a different Android phone (an Xperia), installed the drivers and had it running on adb usb in no time. So I'm doing it right.)
Any thoughts? are there commands to specifically listen and figure out what's coming from the usb port?
any other leads anyone may have? I'm listening!
Cheers, Shawn
The port must have suffered hardware damage. Examine the port for obvious conductivity hindrance. If not I'm afraid you'll have to get it repaired
As for cm7.2 after flashing just format to ext3 from boot menu(before this wipe dalvik cache), and after a reboot wipe data from stock recovery for good measure
Sent from my MB526 using xda premium
Well, thekguy seems to be on the right track.. I can fiddle around with the usb plug and get it to charge, So the problem seems to be mostly physical - if not completely.
I still can't get it to connect properly to the computer, but go figure which usb signal is dropping off. might be power, might be data.
After spraying it several times with contact cleaner the port is good enough for steady charge. No change about how it doesn't connect to a computer.
I feel like a dumbass, cus I already gutted the phone up a couple of days ago to try tracing conductivity paths through the port. the usb port is cast in plastic that is not removable from the pcb. There's no access to the USB pins, excepting four conducting points through the plastic right next to the port, but they are all connected to ground - they probably belong to a bracket that's holding the plastic to the pcb.
anyhow I did all that (I got closeup pictures if anyone's interested) but I wasn't able to check conductivity, and I didn't try fiddling with it after that. bah!
___________________________
Still wondering about one thing! The bootloader is locked, so that means it was never-ever changed since the phone was manufactured, correct? So no effect of writing different SBFs on the bootloader, correct? (minding the Efuse and CG numbers)
if so, than can I conclude only by that information (and that I cannot connect the phone to the computer anymore with bootloader) that there must be hardware/physical damage? I've just completely eliminated the software factor out of the equation. haven't I?
Did I miss anything? let me know.
P/S, I'm going to stick with this phone as it is. I can work around never having usb data connection.
Cheers
Can you try installing Linux and see if the you can mount /system or even /sdcard on Linux from bootmenu? Bootmenu mount only works in Linux. I've tried it in Ubuntu 10.10
Its worth a try, if Linux doesn't see it then it must be a hardware issue and would need a Motherboard replacement.
Use ubuntu live disk to make things easy and not mess your Windoze
Sent from my MB526 using xda premium
You're right, sbf flashing cannot break usb functionality. I'm not very well versed in mobile hardware but I think the port can be replaced, though I don't know how. It may be possible that a local mobile store could fix it.
Trying Linux is a good idea, though it may not work out from the looks of it(the phone)
Sent from my MB526 using xda premium
If anyone is reading this, I had some bad batteries and a usb port that is having physical problems. I'm flashing it with contact cleaner spray every now and again and it helps. I can get a usb connection to the computer and charge it with a bit of luck and while I keep it stationary.

[Q] I'm SO LOST PLEASE HELP!

I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
IAmTechFreq said:
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
Click to expand...
Click to collapse
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Yoinx said:
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Well you see man , I cant change anything in Device Manager since my phone isn't being detected. It didn't install drivers fully fully since my phone isnt recognized. Even in TWRP or "Download Mode/ Firmware Update" Nothing happens no drivers installing or anything even but it does boot it up to that point....and its just normal boot up i see the LG logo and my led goes from green to blueish in a smooth transition and it doesnt stop until i turn it off. The method i got into recovery is holding all those buttons down its not a problem for me to get into it. I also have another problem it doesn't seem to want to mount my usb otg by samsung.
what do i do
So i tried the otg route but I can't mount it. I have everything connected and once I go into recovery to mount usb-otg, nothing happens.
I just need some way to get a ROM.zip in my phone
Computer does not recognize my phone.
Stuck at LG logo unless I enter recovery.
Sideload doesnt work.
OTG doesnt work.
I've tried at least 4 different guides with no luck.
Why don't you manually install drivers from online?
ive tried
tzzeri said:
Why don't you manually install drivers from online?
Click to expand...
Click to collapse
ive tried that already and it doesnt list anything from the LG folder.
I realized the phone will say start the adb sideload feature. so, when i put the "abd sideload file.zip" command on my pc i just wait a few minutes and it says daemon not running on port 5037 and then start successfuly and then error :device not found.
it can seem to reognize my device wether its in recovery, or download mode or fastboot mode.
Try again in other pc that has never been conected to an LG Phone before. It can perfectly be a conflict with drivers installed in the OS.
I've tried man
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
IAmTechFreq said:
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
Click to expand...
Click to collapse
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
tzzeri said:
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
Click to expand...
Click to collapse
No there is no problem with your USB cord or port. You need to do following steps.
http://forum.xda-developers.com/showthread.php?t=2432476
https://www.youtube.com/watch?feature=youtu.be&v=g01Pa7cgdSM&app=desktop
Please let me know if you succeed.
All credit goes to #bender_007

Categories

Resources