Telus UT Starcom upgrade 6.0/6.5? - XV6700, PPC-6700 General

Hey is there a custom rom for this phone? I want to flash it to WM6 or 6.5 if it will handle it. possible? Will any apache rom work? Its on the Telus network CDMA.

eddyg519 said:
Hey is there a custom rom for this phone? I want to flash it to WM6 or 6.5 if it will handle it. possible? Will any apache rom work? Its on the Telus network CDMA.
Click to expand...
Click to collapse
<I tried to post the links to these Telus ROMs but since I am brand new to this forum, the system will not allow me to post external links. Email me and I will send you the links.>
Here's a link to a Windows Mobile 6.5 ROM developed by Tinkerbell over at PPCKitchens.org. Scroll down to the bottom and you'll see the Telus version. Only one minor issue as far as I can see - when you choose getting started, the print size is huge (you have to scroll back and forth and up and down to read it (Tink (the developer) is looking into this). She also put together a 6.5.x ROM for Telus which you can find at this link.
These ROMs are for Bootloader v2.02 on Telus (you need to make sure that this is your version before you flash) - to find out your Bootloader version, press and hold the Power button + the Record button + Reset (use your stylus to press Reset at the bottom of your phone) until the screen goes grey - down at the bottom of the screen, you'll see the bootloader version.

Related

!!XDA trying to unlock with version 5. 14!!

Dear Manipulator developers,
I have a XDA simlocked to O2 and need your help for unlocking cause it didnt worked by now!
If i hold Power Button and press the softreset there comes the red green blue screen with:
Wallaby Bootloader V5. 14
GSM OK
if i put in my serial cable(bought on ebay) and start the Manipulator..there stands:
GSM turn on
already on restet....
and then it disappears and there stands:
"GSM turn on
sucsess..
ok but in the software there stands :
Status: ready
sidlock : <none>
Gidlock: <none>
IMEI: some numbers
keep first 8 digits is hooked
call timers: zero
no reset button anymore cause i pressed it allready!
if i startet the program the first time there was no "unlock button" just reset button..
now there is notthing to press??
what must i do?
if i start this software it founds the xda on com 1!so everything seems to work!??
please help me!
greets
Daniel
PS: i can change the numbers in the field "IMEI" but that is dangerous or not my imei is my phone id!?
oh what might be important:
i have not done an "autokonfiguration" for O2 network..cause this is downloading the smart menu stuff thet i dont wanted..
have i to do this autokonfiguration to use the manipulator correctly?
or has it nothing to do with the autoconfiguration of my mobile phone?
please help me i am as far as before!
PS:i think this Forum is getting too big..maybe the chifs of this great site could make categories for the forum?!
like "tecnical questions-hardware questions-software questions and so on..
one more question..
if u read my post above u see that i am trying to unlock my simlock on O2..but now..i thought about it..what is if this what stands there (simlock : <none>) is correct!!?? i dont have a simlock?!maybe..look i can use a D2 simcard..all works fine but!:if i loose networksugnal..i have to turn off an on again the mobile..cause otherwise it would stay without neworksignal the whole day!..my question:do i have a simlock??
or wouldnt it be able to use any other card if i had a simlock to O2?
pleas help!
Spiko
From the above I would conclude your phone is indeed not SIMlocked, but you are experiencing problems related to Radio Stack version 4.14. The answer is to upgrade to 4.16 or 4.17, which both exist and are floating around, but haven't been offered as official upgrades yet.
But if i put my xda in bootloader moder there stands version 5.14!
if i reet it normaly there stands 3.14? which is my radio version?
wher can i get a new one for germany?
can i upgrade via dockingstation?
Version numbers
There is a whole bunch of version numbers associated with the XDA:
The Microsoft PocketPC OS version
The HTC software version (3.00.01 through 3.15.something)
The Radio Stack version
The protocol bytes
The Wallaby Bootloader version
Each version number represents the version of some different part of the software. Your bootloader is a separate thing with a separate version number, not related to the rest of the ROM. Your bootloader could well be present before the device gets a plastic casing and is told whether it's going to live a life as an O2 XDA. a T-Mobile MDA or a Siemens SX56.
A certain HTC version will be built based on a certain release of the PocketPC OS, with all the HTC specific drivers and additional (O2 or T-Mobile) related programs added.
The Radio Stack version depends on the software loaded into the GSM part of the device, and can vary independently from the OS. There's different versions depending on whether its a 900/1800 (Asian/European) or 900/1900 (American) phone.
ok but where can i get a update for a german xda?can i get it free without paying in an O2 shop?
Where can updates been found?and how do i upgrade my rom version?
greets
spikomatix said:
ok but where can i get a update for a german xda?can i get it free without paying in an O2 shop?
Where can updates been found?and how do i upgrade my rom version?
greets
Click to expand...
Click to collapse
Look here: http://www.genion.de/genion/hilfe/more/
then Hilfe, thne FAQ check XDA

Backup of ROM?

Hello.
I want to change/upgrade my ROM to WM6. But I want to make a Backup of my existing from first (maybe I'm to stupid to do the Update) and to have the chance to get my MDA Vario back to life I want to make a backup of the ROM is installed at this time.
Could somebody maybe tell me how i can backup my ROM? And... How can I reinstall the ROM? I think it will be moved to the SD Card?
Thanks a lot.
You might want to try this then first:
http://forum.xda-developers.com/showthread.php?t=305294
Thanks for this.
May problem is that I have a "very" new ROM installed (T-Mobile MDA Vario 2.21.2.8 GER). and I'm unable to complete the the CID unlock process (the Netlock is removed allready with the lokiwiz 3a.).
If I'm entering the Bootloader and open mtty I'm .not able to open the USB port.
Does it mean I need to downgrade?
Thanks Maik
There is a newer public T-Mobile ROM on the T-Mobile website: Version 2.26.2
You need to downgrade your ROM to custom 1.05 (check the WIKI page) in order to run lokwiz CID unlocker!
I tried the version 3 of lokwiz but the only one which worked properly on my MDA was the version .2b
How ever,
the CID lock should not effect the MTTY utility. This is an official HTC procedure and should work on any WIZ.
UPDATE:
I just saw that you're talking about a german ROM? The latest public german ROM is 3.3.8 (check the german T-Mobile site for that!). If you want to keep the older 2.21 you can find it at the Austrian T-Mobile site again after downgrading and unlocking your CID
I am running the german rom AKU3.3 myself - it is much nicier than previous versions and has already some WM6 features integrated.
Ok. So I need to downgrade my Device. to do the CID unlock.
Maybe the system firewall and some other settings are affecting the MTTY issue.
I checked the T-Mobile website for the newer German ROM version.
If I check https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm (what my Device is) I only see the 2.21 version and NO newer version?
1.
Go to www.t-mobile.de
2.
Click on top on the menu "HILFE & FAQ"
3.
Select on that site "Broschüren & Software"
4.
Now click on the left site menu on "T-Mobile Software"
5.
It takes you to a new page and asks you for your MDA. Don't worry if your PDA is not in the list! Just choose any PDA. It will take you to a new page and show you the selected PDA. Right underneath you will see a link: "Model aendern" - click on that link and then chose as Manufacturer T-Mobile and you will find the MDA VARIO!
Sorry for being so complicate but the T-Mobile site is set up with Flash, so, you can't just copy the link! You always have to go the loooong way! Be aware that you have to temporarely allow popup's ... !
How ever,
I will try to paste the link here to the direct download and I hope it works:
http://www.t-mobile.de/downloads/t-mobile/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
Hey the link works....
Thanks. I find out that my Device is a G4 device and I also see that I can't unCID this device... Right?
I'm a little bit in fear that something is going wrong during the Update to WM6 and I have no working Backup on my SD card.
Ok. So this steps I will do. Maybe you can currect me if I'm wrong.
1. I will perform a downgrade to the custom rom 1.05 and then I make a backup after running CID unlock.
2. I make a Backup with the MTTY
3. I will install the WM6
4. If not working I can backup from SD card and maybe install the newest ROM
You only should downgrade for CID unlocking your device! This is required for installing other ROMs than from your cell phone provider!
If you want to upgrade to the new german AKU3.3 from T-Mobile - that should work without CID unlock! You also should be able to downgrade to your existing ROM version in case you just dislike the new AKU3.3
BTW:
If you're planning to upgrade to a selfmade WM6 which you can find all over the web: I tried almost all of them! None was as stabile and good as the german T-Mobile AKU3.3! Sure, they look cute with their VISTA-style look but the functionality is far away from being perfect! Also: Lots of the ROMs are very user-personalized and contain no configuration for your network (such as GPRS and MMS) - my advice: stick to your provider ROMs, either AKU2 (which you're currently running) or the newer AKU3.3 from the link above - at least until you learnt flashing and registry hacking on your device!
WOW I allready can hack the Registry but having sometimes some issues with instructions here . Like I say before... I'm a little bit in fear...
Well, it is understandable! Noone wants to end up with a brick!
There is always a risk in flashing devices! I do it since years now and was unlucky only once by flashing a SIM locked ROM to a Motorola phone. Haven't had any problems since then. The best thing is READING and if you can't find answers just post your question. Next to it is always helpful to check also other Forums or try to find guides in your own mother tongue!
Hacking the registry is not really riskfully - at leat the only one thing what can happen is that your device won't start up and you might lose your files and data. Other than that you should be able in any case to get it running with a hard reset again by holding CON button and Voice Dial button at the same time and press Reset.
Flashing can destroy the device because of it actually erases everything in the device; even the ROM before it writes the new one. But even here you will be able to enter in BOOTLOADER mode in most cases.
Yeah thats right Junner. Reading and asking... Since I flashed my SDA wrong I'm happy to have a Backup on the SD card to get the Image back. If this is the case I'm happy.
I installed AKU 3.3 and it's looking good and working fine.
Maybe I will downgrade to the custom 1.05 and do a backup. I only want to look how the WM6 is looking.
Are you German? Or german speeking?
The ROM backup to SD card via MTTY should work without CID unlocking your device! There is no need to downgrade for that purpose. I had hard times by doing it too. It took me several trials until it worked finally!
The downgrade is only necessary if you're planning to install ROMs from other providers or ROMs in other languages. I asume you're german, so, if you don't believe anything I say - this you can believe: the german AKU3.3 is the best out there you can find for the WIZ
Like I mentioned earlier: all the WM6 ROMs you will find all over the web are user created! They are either taken off from other devices and changed around until they worked on the WIZ or just visual pepped up AKU3.3 ROMs (the one you installed now). Allthough, I did not find any WM6 out ther which did not have issues in one way or another ...
I speak a little bit german , yeah!
We have WURSTFEST here once a year with lots of Sauerkraut and beer ...
Mates, if I read my rom am i going to be able to copy it to pc and Dump it with a ROM Kitchen?

TMO Wing 4.26.531 soon?

On T-Mobile web site I noticed information about "How do I perform a device software upgrade?"
http://support.t-mobile.com/knowbase/root/public/tm52082.htm#top.
it refers to
"How do I determine what software version I have? (T-Mobile Wing™)"
http://support.t-mobile.com/knowbase/root/public/tm52081.htm?
which states that "The new software version is 4.26.531".
But new software in not available yet http://www.t-mobile.com/wmupgrade/
maybe when WM6.1 comes out?
wyldstallyns2589 said:
maybe when WM6.1 comes out?
Click to expand...
Click to collapse
It's very very unlikely that T_Mobile is going to release WM 6.1, but even if it's just WM6 it's still a much awaited update since it's the only one WIng users have gotten!
Oh by the way, i really hope too that it's WM 6.1, since ATT released it for their phones(Tilt).
according to microsoft, WM6.1 doesn't even exist. i contacted customer service asking when it was coming out because the internet isn't helping and after about 5 minutes of looking, the guy said WM6.1 doesn't exist and to talk to HTC about windows mobile updates . . .
The Wing ROM update 4.26.531 is available!
I too was frustrated with T-Mobile's website that was missing a link to the download for the new ROM for the Wing. My wife has a Shadow that is also made by HTC. I downloaded a ROM update for her phone and I copied the URL and changed the last part from shadow to wing. Amazingly, the link worked. Yesterday I was on the phone with tier-3 support from T-Mobile and they escalated the issue to the web development team. We didn't expect an immediate resolution due to the holiday.
So here is the valid link to download the T-Mobile Wing ROM update that http://support.t-mobile.com/knowbase/root/public/tm52082.htm#top says is available.
The ROM update is at: http://member.htc.com/RuuDownload/T-mobileUS/DeviceDownloads.aspx?pid=wing
Happy Updating your ROM! I am so glad this worked.
ToddWM6 said:
I too was frustrated with T-Mobile's website that was missing a link to the download for the new ROM for the Wing. My wife has a Shadow that is also made by HTC. I downloaded a ROM update for her phone and I copied the URL and changed the last part from shadow to wing. Amazingly, the link worked. Yesterday I was on the phone with tier-3 support from T-Mobile and they escalated the issue to the web development team. We didn't expect an immediate resolution due to the holiday.
So here is the valid link to download the T-Mobile Wing ROM update that http://support.t-mobile.com/knowbase/root/public/tm52082.htm#top says is available.
The ROM update is at: http://member.htc.com/RuuDownload/T-mobileUS/DeviceDownloads.aspx?pid=wing
Happy Updating your ROM! I am so glad this worked.
Click to expand...
Click to collapse
Any idea what is changed / new in this update?
has anyone tried this yet?
I'm updating my backups and getting ready to try this. I'll let you know how it goes ,and in a few days to let you know how it works in my machine.
can you post anything you notice right away? i'm hoping this is 6.1, what else would it be?
I have a T-Mobile Wing USA.
I am flashing it right now:
1. I extracted the RUU_signed.nbh and flashing via MMC.
2. It scans 2 OS's from the nbh.
3. Reading second OS from SD!
4. Flashing second phase OS
5. Success, Press any key.
6. T-Mobile Splash
7. Original Windows 2nd splash (no indication of version)
8. Typical alignment screen
9. Stylus tutorial screen
10. Password screen
11. complete screen
12. Customization tool
13. 3-5 minute wait then reset
14. T-Mobile start up jingle
15. Installing MyMobiler for initial browsing of the phone now.
Follow up with pics in a little bit.
Pictures are now added. As stated by the next OP the ROM is much more efficient/faster than original stock. But it is WM6. No need to downgrade if you are using custom a custom rom with 6.1.
To upgrade/downgrade with HardSPL use winrar to remove the "RUU_signed.nbh" from exe. Rename to heraimg.nbh put on the root of MMC and install.
Note: I already have went back to "Just2Clean Wing - zcink Edition". I won't be able to answer any questions. I have to have threaded sms and a lightweight ROM.
It's still WM6. There's 17.5mb or ram available without any mods, and it seems to run a little faster, but it's still the same rom. It's version 4.26.531.1. Basically, tmo doesn't care what we want. If you want 6.1, buy a new phone or make your own.
I can't uprom
I did HardSPL so that I could uprom.
But I can't uprom that is from T-mobile website.
How do I have to do ?
If you have a HardSPL'd Herald/Wing/Atlas, use 7zip or WinRAR to extract the contents of the file. Delete the SPL.nbh file. Flash.
I tried it, but I'm disappointed with it... It's just more useless old junk... at most, it might be a good starting point for a ROM base.
well i updated, wing seems SLOWER!!! well after a few resets it's about the same, overclocking to 247.
2 things i've noticed, if you are in the text message program, with all your messages, and you receive a new one, the pop up still comes up, i find that very annoying. also, you now have MMS options in the menu option in the text message area.
the COMManager looks "cleaner" and smaller as well
I didn't install anything but MyMobiler and the ROM seemed fast. No overclocking either. But again I won't live with out threaded sms.
I noticed that the radio rom is upgraded to 03.21.90. Does anyone notice any difference with the new radio rom or is it basically the same as 03.07.90 that came with my device.
what are you using for threaded SMS?
So far I don't see any major differences. It seemed a little faster, but it still benchmarks the same. The only minor diff was more available ram before modding, but once I cleaned out the startup folder I had 26mb just like before. I'll see if the radio makes any diff at work Tuesday.
Happy Memorial Day!
Well it's been 16 hours since my last soft reset and it's still got 23mb of ram available. That's practically unheard of on a stock rom. I still need to cook my own to get rid of this MyFavs crap, but this seems like a good starting point...

Question about the telstra T9193

So I received my T9193 today and I want to run it on the Rogers network, however it seems like this rom has quite a bit of stuff hard-coded into it, such as the internet connection details and the quick links on the home screen... Is there an easy way to disable this in the registry?
If not, are the roms for the HD2 specific to a particular version? ie. which rom will work with the T9193?
I got a Telstra TouchPro2 - I just flashed the stock wwe ROM to start and it worked very well on Rogers. I would assume you could do the same with the HD2.
You can remove the three quicklink icons on the home screen using a cab someone made. It can be found by searching in this forum. You will need to create a new internet connection to get your browser, etc. working. Telstra has the default one hard coded in. You could also follow the steps here:
http://forum.xda-developers.com/showthread.php?t=625919
which will give you step by step directions to install custom roms on your phone. Any rom offered in the HD2 ROM DEVELOPMENT thread will work on the Telstra branded HD2. It will also unlock and return all the internet settings to default.
just installed dutty's rom and it worked... you have to keep the original radio rom though... works great! getting 1800kbit/s on speedtest. Very fast phone! what winmo should have been all along ;D

Orange branded Jade question.

Hi all, im thinking of getting a Touch 3G (Jade) as a second phone, my first being a touch Diamond 2, and am thinking of buying one from E-Bay orange branded.
My question is if i get one, it seems i can get it sim unlocked easy enough, but once i get it sim unlocked can i dol the hspl and flash any rom i want as i have been doing with my diamond 2? Or will being originally a branded Orange one prevent me from doing this?
Thanks in advance.
You can easily SIM unlock it via ebay, i did it this way. And after that when you do HSPL you can put whatever ROM you want.
Thanks for the reply, yeah i thought that but i think i will get it unlocked by Olipro/Olinex from the link in the hard spl thread, i feel i could trust their service more
Hi again. Ok i have bought a Touch 3g that was Orange branded, i have purchased the sim unlocking utility from Olinex, got hard spl running and tried a few roms to see which suits me, but whichever rom i use i am still getting the Orange start screen before the rom loads up. Not to big a problem really but if possible i would like to remove it, any ideas guys n gals ?
Shambolicuk said:
Hi again. Ok i have bought a Touch 3g that was Orange branded, i have purchased the sim unlocking utility from Olinex, got hard spl running and tried a few roms to see which suits me, but whichever rom i use i am still getting the Orange start screen before the rom loads up. Not to big a problem really but if possible i would like to remove it, any ideas guys n gals ?
Click to expand...
Click to collapse
hi
i think it is called a bootloader screen their is a solution to change the same u need to search as i dont remember the thread look in windows development thread and development and hacking thread im sure u will find what u want
goodluck
I'm using an Orange branded Touch, after flashing a 6.5 rom it changed the boot picture to the HTC one, then I went back to a 6.1 rom because I like the start button at the top.
mitch1974 said:
I'm using an Orange branded Touch, after flashing a 6.5 rom it changed the boot picture to the HTC one, then I went back to a 6.1 rom because I like the start button at the top.
Click to expand...
Click to collapse
hi
u also have 6.5 with start button at the top chek tommys 1.7 series they have top start buttom
haree said:
hi
u also have 6.5 with start button at the top chek tommys 1.7 series they have top start buttom
Click to expand...
Click to collapse
Thanks for that, I think I'll try that and PDAVIET V31, they're both built on the same core, but each cook put their own touches on them.

Categories

Resources