Hi all,
I have an XPA S200 alias Prophet from Swisscom Mobile. The first thing I did was installing the "PDAMobiz Editon Upgrade Rom for SPL 2.15.0001" ROM which worked well for a while.
Now I can't sync it anymore using the USB connection (IR works). Yesterday I installed the ROM again, restored my data and was able to sync. I thought ok, everything is ok now. But today sporadically I have the same issue again.
If the connection is not ok, my computer only shows an unknown device.
Does anyone have an idea what can cause this problem. It seems like the USB port of the device is blocked from time to time.
By the way has anyone an English version of the original Swisscom ROM for the S200? I have forgot to back it up before installing the new ROM.
ROM version: 2.15.13.27 WWE
ROM date: 3/9/06
Radio version: 02.19.21
Protocol version: 4.1.13.09
ExtRIN version: 2.21.13.102 PDAMobiz.com
I have ActiveSync 4.2.0 (Build 4876) (English) installed on my computer.
Best regards,
Tom
Today I was playing around with my device. I tried several things, but it is not possible anymore to connect using USB. Even a ROM upgrade doesn't work anymore.
I can still sync my device using IR, but any ROM changes are not possible anymore.
Don't know if this will help but found that connecting the SPV M600 to the USB lead occasionally tripped out the USB 2 port on the computer. Just switching the computer off and on didn't help as it was only a soft reset. Switching off and disconnecting from the mains for 60 seconds, then switching on again reset the USB port and allowed activesync to work again (untill it tripped out next time). This has happened about 5 times now in 3 weeks. This applied to all USB ports, not just the one connected to.
Unfortunately this doesn't help. I made some further tests. A friend has the same device.
Using my computer I can sync his device but not mine. Using his computer we can sync his device as well but mine doesn't.
But again suddenly it was possible to sync sporadically. Now I think there is really a problem with the USB connector of the device.
Because I assume a hardware problem and need to contact the vendor I need to get an original ROM from Swisscom now (no matter which language/English preferred).
Does anyone know where to get such a ROM? Swisscom currently doesn't offer any to download. Additionally is there a way to upgrade the ROM using an SD card?
I think I got one step further. When I use the USB-switch tool and change from rndis to serial and back Activesync connects again.
For a moment it is connected and syncing but then it gets disconnected again.
No matter what I try the connection is not stable.
Hello,
this sounds like exactly my problem.
Previously i had T-mobile MDA (with dipod rom), and it worked fine, no problem at all.
Now i have a prophet (again Dopod rom), and i've had nothign but problems. Activesyc initially worked once or twice, but has not for a long time now. i've tried deinstalling, re-partnering, deleting everything, etc. I've even now had XP re-installed on the computer and done a cold boot on the Prophet...now change!
The only thng that works is syncing via infrared! This works every time, no problem at all.
I have no idea what the issue is...but it is very frustrating.
i have the same problem, it worked for two weeks. today suddenly does not connect anymore. WTF? I install new activesync, rebbot divece, computer & still nothing...
doesnt work on other computer also... Which files are inportent on divice to connect it with activesync? Please help... tnx
Just flashed my HD2 with Miri's ROM 2.1 "Miri_HD2_WM65_21895_Sense25_V7.1". This is my first cooked ROM on HD2. It works well until I find out that every time I connect my HD2 to the PC in Disk Drive mode (fast file transfer), after a while the phone will completely freeze whether or not it remains connected to the PC. I then have to remove the battery and restart the phone. Suspecting if this is due to registry editing done to the phone, I reflashed the above ROM, and the problem persists.
Does anyone note this situation? Does this freezing have anything to do with Miri's cooked ROM? And is there anyway I could get rid of it?
P/S: The phone works flawlessly if the connection mode is set to "ActiveSync".
Thanks for any tips.
I get so far with running Hard SPL V7 but it ends up with the 3 colour bands on my phone (plus white) while running RUUWrapper.exe from a pc.
I then get the error
"ERROR [[260]] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again. "
I've followed the advice here and tried again but nothing seems to do any good. The phone disconnects from Active Sync everytime.
Is there something else I can try?
I've continued with this but still get the connection problem no matter what I do. The advice for the 260 error seems more in hope than expectation. Surely just doing something that doesn't work again and again is a definition of madness??
Success.. I don't know exactly how I managed to do it but eventually I installed a Windows 6.5 ROM by MrDSL which is a major improvement on the old Orange installation...
Hello,
I´m runing Android gingerbread on my HD2 and have sometimes the problem, that when I once disable the data-connection, and enable it again, my phone will start a data connection. It stucks in 2G non data connection.
After rebooting my phone data connection is established.
HAs anyone the same problem?
With the original WM 6.5 I have never had such a problem, so I guess its not a phone/provider problem.....
My home WiFi router SSID has stopped being listed on my HD2. It has been working normally for 4 months. I can't think of one particular change I have made to my device that preceded this problem.
I have a Virgin Superhub which doesn't need to be in a "pairing" mode to accept connections. I have soft reset my HD2 and restarted the router without change. My laptop sees the SSID normally.
I am using YUKI's ROM.
Has anyone else had a similar experience?
Try different rom that one seems to have alot of odd problems
once i manualy changed the boadcast channel of my router and my hd2 couldn`t see the router either.
Hard Reset
May be a silly question...but...does the Hard Reset from within WP7 settings pages work OK with magldr?
fillippe said:
May be a silly question...but...does the Hard Reset from within WP7 settings pages work OK with magldr?
Click to expand...
Click to collapse
yes, it will only reset wp7 to factory default. will not erase magldr.
Thanks
G4: I'll try a hard reset first and maybe a Green Mango ROM next.
Hyellow: Thanks for the answer.
Hard reset did it, but now flashed XBMOD-YUKI rom which is ace.