Hi Guys,
im wondering if anybody could help me.
There is a new Multi-CSC File existing which is updated and ready to use. This CSC is very important for all users who are hazzling with so called "Virtual Network Providers" which are located in many countries. (i.e. BOB in Austria)
as these people need to activate data roaming - this is very harming - now the new multi CSC is the solution!!
I see that all of that data is stored in cache.rfs and i can already extract/copy them.
But now i need to know what do i need all to extract, and how to pack it for flashing as a single file for odin.
This new Multi-CSC comes from stock firmware JPH/JPP/JP9
there is also an directory in system dir of cache.rfs called "T9DB" ...i think this could be deleted?
anyway.....there is nothing more in it .....so it would be able to flash the complete cache.rfs (tar it and make md5sum for odin compatibility)
just flashing complete cache.rfs is then without dangerous?
thanks for any hints!
furthermore i want to provide the new multi-csc as i think this could be very useful for us all.
thanks and regards,
You can use MagicISO or Poweriso to extract the new CSC from cache.rfs, and the T9DB I think that is the dictionary, and then read here:
Click here...
t0xxin said:
now the new multi CSC is the solution!!
Click to expand...
Click to collapse
who did confirm this?
I'd also like to get th enew I9000OXXJP9 as it contains last AUT code for me
Any help is appreciated
Does anyone have the CSC - I9000OXXJP9?
Related
i know most of you guys are angry about posting this.but i use the search button can't find anything about this.
My question is i downloaded jm8 from "samfirmware . com",i unpacked it and only i got CODE_I9000XWJM8.tar and MODEM_I9000XXJM4.tar. What is CODE.tar.??is that pda file and there is no csc file.i found a multi csc from jm9 thread.can i apply this csc??
mertkan said:
i know most of you guys are angry about posting this.but i use the search button can't find anything about this.
My question is i downloaded jm8 from "samfirmware . com",i unpacked it and only i got CODE_I9000XWJM8.tar and MODEM_I9000XXJM4.tar. What is CODE.tar.??is that pda file and there is no csc file.i found a multi csc from jm9 thread.can i apply this csc??
Click to expand...
Click to collapse
CODE is PDA,MODEM is PHONE,CSC is CSC.Yes you can apply csc from JM9.
Regards
Its not the question but the section which is not correct.
We have a special section called Q/A for these questions. Please use it next time.
ANSWER: http://www.youtube.com/watch?v=PpWcM44On88
Any of you guys who's got the files for flashing back to jm8? I downloaded the file from samfirmware.com but it seems to be corrupt and winrar only gives med a attention message teeling me that the file doesn't work. I need JM8 and also I would need the working files for jpa. When I downloaded JPA I only seemed to get one .tar-file
Thanks for any help you could give me
Hi @All,
maybe, there is a Thread bout this HOWTO, but I found nothing to use...
There are now different unofficial Firmwares, I flashed JM6-JMI, I cant remember, which CSC, PDA or PHone is really good, some FW dont have all these three things, so I want to extract this Files to have the ability testing JM6 up to the newest JMI....
My really problem is, how to extract these files and got it accurate!
jammysunny
It seems, there are no person to tell me how.....
This has already been answered.
http://forum.xda-developers.com/showthread.php?t=879569
This will help. Galaxy S forum also has extra quality knowledge.
(Extract JMA.tar (for example) using 7zip to a directory. Then use MagicISO to open the cache.rfs to find a folder called "Recovery" Inside are two files. One says "command" and one says "sec_csc.zip")
jammysunny said:
Hi @All,
maybe, there is a Thread bout this HOWTO, but I found nothing to use...
There are now different unofficial Firmwares, I flashed JM6-JMI, I cant remember, which CSC, PDA or PHone is really good, some FW dont have all these three things, so I want to extract this Files to have the ability testing JM6 up to the newest JMI....
My really problem is, how to extract these files and got it accurate!
jammysunny
Click to expand...
Click to collapse
if i get you right then roto backup is what you need.
Hi all
I am looking for a multi csc file I can install on my Galaxy note N7000.
I installed 4.0.3 UK carphone warehouse ROM and the CSC file is ONLY CPW!
I have the 4.0.4 German ROM and have unpacked it:
cache.img
factoryfs.img
hidden.img
modem.bin
Sbl.bin
zImage
Any ideas on which one is the Multi CSC if it exists in this package I have?
Alternatively can anyone provide A DOWNLOAD LINK just for the CSC Multi file please?
Thanks
The cache.img contains the CSC(s).
I came across this thread - page 44 - Multi CSC for 4.0.4
So I downloaded and I copied the file to internal sd card, rebooting into clockwork recovery and installed the multi csc zip file.
Did the *#272*IMEI# and all the countries appeared - worked !!
Cheers
tsam19 said:
I came across this thread - page 44 - Multi CSC for 4.0.4
So I downloaded and I copied the file to internal sd card, rebooting into clockwork recovery and installed the multi csc zip file.
Did the *#272*IMEI# and all the countries appeared - worked !!
Cheers
Click to expand...
Click to collapse
Have you got a link?
Sent from my GT-N7000 using Tapatalk 2
It would help wouldn't it
http://forum.xda-developers.com/showthread.php?t=1765307&page=44
Be careful, I installed the 'EUR' setting and upon reboot the phones been wiped of all apps and settings - doh!! :crying::crying::crying:
I'm not sure if 'EUR' is the UK setting as the language upon boot up, visible was definitely not English!!
I think I should have chosen the 'XEU' setting instead ??
All the best.
Here's one I just extracted from N7000ZSLPF_N7000OZSLPF_OZS !!
:good::good:
None of the Multi CSC files above contain the 'XEU' setting !!
I'm going to try the CSC file from the N7000XXLRG_N7000DBTLRG_DBT 4.0.4 ROM !!
RE: SsZzliMm
How do I install just the 'cache.img' file on it's own ??
Using odin, but how because it's not a zip / tar file ??
Thanks
tsam19 said:
RE: SsZzliMm
How do I install just the 'cache.img' file on it's own ??
Using odin, but how because it's not a zip / tar file ??
Thanks
Click to expand...
Click to collapse
Use Odin or Mobile Odin mate.
Sent from my GT-N7000 using Tapatalk 2
Odin doesn't recognise it as the 'img. file !!
Also I could do with a Multi file that has the 'XEU' install setting !!
As the Multi's I've tried don't have the 'XEU' which from owning the S2, is the UK / Euro setting.
All I'm getting at the minute, is the Greek language.
I know I can change the language settings, thats not the point, I want UK language from the start.
First of all - There isnt any thread about Extracting The Complete Stock ROM from the phone, and then Creating a flashable Odin file ( Tar.md5 )
So heres my Question that can any of the XDA People give a procedure to extract the STOCK ROM from the Phone ( CSC, Modem, PDA etc ) and creating a Md5 file which can be later used.
The xda people already have procedure for you sire
http://forum.xda-developers.com/showthread.php?t=1777579
Thanks a Lot !
rvalvekar said:
Thanks a Lot !
Click to expand...
Click to collapse
You are welcome! Happy to be of help
Some questions ;
I have a CDMA Galaxy Y phone - so what all should i be dumping to create a tar file. Also Do i need to create separate csc pda and modem files ? or in Single Package i can Make a flashable tar file ?
So if i have to create separate csc pda and modem files for odin, how can that be done ?
and also if a single file - how to do that
Thanks
rvalvekar said:
Some questions ;
I have a CDMA Galaxy Y phone - so what all should i be dumping to create a tar file. Also Do i need to create separate csc pda and modem files ? or in Single Package i can Make a flashable tar file ?
So if i have to create separate csc pda and modem files for odin, how can that be done ?
and also if a single file - how to do that
Thanks
Click to expand...
Click to collapse
make sure the radio is correct (phone.csc) since that contains the telephony device drivers and you must exersise extra care,
remember most SGY roms are built for GSM/Intl. Version,
try and asking anyone with a CDMA version if they have successfully flashed a custom rom with it
http://forum.xda-developers.com/showthread.php?t=1777579
From the link above - there are several dump codes fro example system , recovery, modem etc.
I want to know
is PDA = SYSTEM ?
Modem = Modem ?
then Which dump to take as CSC ?
delete
Good Morning,
Can someone please tell me if its possible to split the Roms from Samfirmware into their component parts,(ie pda,csc etc) and rebuild with different componetnts. I want to be able to use the XEO rom with the H3G modem (csc)
(Should have made it clearer,it's the system image in the package i want to split)
Any help appreciated
Bill
billd2439 said:
Good Morning,
Can someone please tell me if its possible to split the Roms from Samfirmware into their component parts,(ie pda,csc etc) and rebuild with different componetnts. I want to be able to use the XEO rom with the H3G modem (csc)
(Should have made it clearer,it's the system image in the package i want to split)
Any help appreciated
Bill
Click to expand...
Click to collapse
The package from Sammobile breaks down into an MD5 file using 7zip. Then the MD5 breaks down into the components. You can replace the parts like modem but then you need to recompile - on Win PC's that means something like cygwin to do it. Search for cygwin and you should find threads about how to do what you want.
Hope that helps - you are right, your request is a little confusing. (as in you don't need to alter system.img.ext4 to change the modem)