Database Users

Phone wont boot any clockwork build help

Dont know if this is the correct forum to post but here it goes,
phone has MAGLDR 1.11
clockwork 1.1
originally flashed jdms 1.6 nand and was working perfectly
i tried to add the files from the updated clockwork 1.2 booted up clockwork as it normaly would, backed up my current system through through clockwork, i downloaded and put the updated version of jdms 1.7 beta and it would just bootloop, read that i needed a partition and i did it through clockwork, still bootlooped but it woped my sd card's contents with the partition, tried reformatting sd card added a new rom to start from scratch and it just satys at the htc logo or the android on rollerskates logo, tried putting the recovery image had back and it said it couldnt recognize md5 sum so it wouldnt do it. ive tried three bulds and all of them get stuck at the htc or cyanogen screen, i am doing all this from ubuntu, do i need to just start over and reflash through DAF? i dont have access to a windows machine so it will be a while, anybody have any suggestions? im phoneless at the moment, thanks in advance

Wipe cache after restore.
When bootloop, restart phone, start Clockwork mode - wipe cache.
Then restart phone.
Sent from my HD2 running Gingerbread

Tried that, didn't work still stuck on HTC quietly brilliant screen just flashed raidroid HD build

anyone has any advice?

Same Issue
I have the same issue of a bootloop... this seems to be the only place i could find with someone who is having a similar issue as i am.
Steps ive done:
Used Task29 w/radio 2.08.50.05 first.
Ive installed HSPL3
Ive also installed MAGLDR 1.13
Ive partitioned the SD to 13 gb FAT32 and 1 GB Ext3 --- both in primary
Ive flashed recovery 400
installed recovery files onto sd directly
I added the zipped CMYLXGOroms.stock.desire.HD.v1.1.5n.NAND.RMNET.NO-SQUASH-RAFPIGNA.1.7OC_CWM file directly to the SD card root.
then I install the CMYLXGOrom and it installs correctly, and then it boots up, and i see the android welcome screen for a second, and it starts its bootloop.
I've tried this with several differnt roms that are for the 1024 LEO but I get the same result each time.
Any help would be much appriciated!

Cyanogenmod 7 - Hanging at splash screen

I had an earlier version of cyanogenmod installed, I went into rom manager and pressed update (or something like that). It did the whole installation thing but now it's just hanging at the cyanogenmod splash screen.
What do?

silverback88 said:
I had an earlier version of cyanogenmod installed, I went into rom manager and pressed update (or something like that). It did the whole installation thing but now it's just hanging at the cyanogenmod splash screen.
What do?
Click to expand...
Click to collapse
Have you tried to boot into recovery ? (turning it on by pressing the power button and the - volume button)

Did you backup? Always, always backup.
If not try downloading the ROM and flashing that, don't wipe just yet, if that fails you will probably need to wipe and flash again.

ok so i did a recovery of the backup i did just before trying to install cyanogen 7
FFUUUUU.... now everything is pretty much lost! even the old cyanogen is gone. What can I do?!

Was your old backup from a pre 2.3 ROM?

^^ how can i tell?
sorry for being a noob

What was the ROM you backed up before flashing CM7?
the backup i did just before trying to install cyanogen 7
Click to expand...
Click to collapse

it was cyanogenmod 6.1.3

Ok, your problem now is that the file system changed from 2.2 (Froyo) to 2.3 (Gingerbread) and you will need to flash a new version of ClockworkMod Recovery to restore that backup.
Do you have ENG S-OFF? You will be able to flash it via fastboot, if not you will have to start again from CM7 and downgrade ClockworkMod Recovery from there, then restore your backup.

I flashed the latest ClockworkMod Recovery (3.0.0.6) - I think before I tried to install CM7.
Restoring the backup means almost everything is gone, apps, settings, etc (but not everything). Did I **** it up? Will I have to redo everything?
If I have to do that anyway I might as well use CM7, but installing that means the splash screen hangs (I had the same problem with CM6, I dont remember how I fixed it)

Your right, to flash CM7 you needed CWM 3.x.x.x
Restoring that backup 6.1.3 will take you back to pre-CM7 so yes everything will be gone.
Have you tried just flashing CM7 again?

ok, trying to install cm7 again...

Don't wipe just yet, if it still hangs after flashing again you will then have to wipe.

****, it's hanging at the CM7 splash screen again

Ok, you will need to perform a wipe.
In CWM you have "mounts & storage"
Format boot & system, then flash CM7 again, (btw which CM7 ROM are you flashing?)

I did that (through the recovery or w/e) and then it was hanging at the HTC logo....
I had to restore the backup once again and am back where I was before
What can I do?
btw it's CM 7.0.0-RC2

Ok sounds like a full wipe is needed.
Again in CWM "mounts and storage" format everything except scdard, then back out and go into "advanced" and wipe dalvik cache.
Flash CM7 again, it should work now.

can i flash CM7 through the recovery console? because if i wipe everything then obviously i cant boot back into it?

Don't worry you can't wipe recovery from within recovery, so after a full wipe it will still be available.

before I do that, how exactly do i install CM 7 from recovery console? I think it was downloaded to my SD card but I dont see a straight forward option in the recovery console

[FIX] Boot loops on eMMC dual boot

First and foremost,
Standard Disclaimer
By flashing this you should understand that I am not responsible for bricked devices. In order to flash this file, you would have already rooted your device, voiding the warranty. YOU are choosing to make these modifications, and I take no blame or responsibility if you brick your device and/or your device catches fire.
I would like to start off saying that I used the eMMC dual boot option referenced here [eMMC]Updated Dual Boot Guide[CM 7.1+][Phiremod 7+][Stock 1.3] and ran into the problem where the main partition (CM7 in my case) was booting normally, however, the alternate partition (Stock 1.3 rooted) would continually boot loop. After research, I found out that it was boot looping due to the incorrect versions of Adobe Flash and Air being installed. They were also installed to /system instead of /data.
I found two excellent guides located here and here that helped diagnose the problem. Unfortunately, these only helped with the primary partition.
In order to fix the boot looping of the alternate partition, I modified the updater-script provided by jaromnelson to reflect the alternate partition.
What this file does is removes the incorrect Adobe Air and Adobe Flash from /system folder on the alternate partition and installs the correct Adobe Air and Adobe Flash to /data folder. DO NOT INSTALL THIS FILE IF YOU ARE NOT RUNNING eMMC DUAL BOOT by Taosaur. If you continue to boot loop after you install, you are not boot looping because of Adobe Air and/or Flash.
To Install:
Download the file located here
Put the file onto your SD Card
Boot into CWM recovery
To be on the safe side, Wipe Cache and Dalvik (not sure if this helps but I do it anyway).
Code:
CWM > Wipe Cache Partition
CWM > Advanced > Wipe Dalvik Cache
Install the attached ZIP through CWM.
Reboot into your alternate partition and enjoy.
I am by no means a developer, just a guy that does a lot of research.
Full credit goes to:
Taosaur for creating the eMMC dual boot guide
jaromrnelson for creating the guide to fixing the boot looping
GMPOWER for the initial ZIP

Do you happen to still have this file, file seems to not exist.
I'm having the same issues you were
You can always upload it here as an attachment

Wow. I can't believe this may actually help someone. All this time, I thought I would have been the only one to encounter this problem. Unfortunately it would not let me attach the file to the post. Anyhow, here is an updated link. I'll update the OP too.
http://www.mediafire.com/?8e8vxgl8haag2a5

Mikey, after looking, it appears that the original referenced thread has been updated to a new method of installing dual boot to emmc. When I get home I will check to make sure that the new version uses the same boot partitions. So for now (until I can check) this zip is only good for the old method.
edit: I looks like the new method uses the same boot partitions (primary system: 0p5 and primary data: 0p6 --- secondary system: 0p9 and secondary data: 0p10) as the old method. So, if you are using the new method and experiencing the same boot loops as before, it should be safe. In reality, I'm not even sure if the Adobe problems exist anymore with the new method. As stated in the OP though, I'm not responsible for bricked devices.
To be honest, my wife has been reading on the nook so much lately, she hasn't let me mess around with it. As soon as she finishes up this book that she's on now, I plan on updating to the newest stock and ICS.
Sent from my LG-P999 using XDA

Always boots to CWM
My problem is a little different, but I'm hoping you can direct me where to go. I've been running the dual boot for about a week and it worked great. Stock on Alt and CM7 Kang on Primary. Today I backed up and then installed a theme that created a boot loop. So I tried to restore from the back up... no good. It boots up the little green Cyanogenmod, says loading, then straight to CWM. Then I tried to format the system, data, cache, and Dalvik, then re-install CM7...same, straight to CWM. I tried from the beginning, repartitioning and installing Stock with CWM... now Read Forever comes up and then to CWM. Suggestions Please.

Hoser88 said:
My problem is a little different, but I'm hoping you can direct me where to go. I've been running the dual boot for about a week and it worked great. Stock on Alt and CM7 Kang on Primary. Today I backed up and then installed a theme that created a boot loop. So I tried to restore from the back up... no good. It boots up the little green Cyanogenmod, says loading, then straight to CWM. Then I tried to format the system, data, cache, and Dalvik, then re-install CM7...same, straight to CWM. I tried from the beginning, repartitioning and installing Stock with CWM... now Read Forever comes up and then to CWM. Suggestions Please.
Click to expand...
Click to collapse
Try this post. Not exactly the same issue, but this person solved his CWM boot loop issue.
http://forum.xda-developers.com/showthread.php?p=23864432
Sent from my Nook Color running ICS and Tapatalk

@Leapinlar
Thanks for the help. That thread was perfect. I'm up and running now!

[Q] **** Solved **** Cannot install Nand Roms....

:victory:****** Solved *******
Hi, thank you for all of your help and assistance.
It was all down to selecting the correct partitions (and me getting over enthusiastic in flashing roms and not reading FULLY on how and what partitions are required)
I have used HD2 Nand toolkit, and partitioned MAGLDR, then partitioned SD card within Clockworkmod.
Thank you all again for pointing me in the right direction...
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt

matt_tee said:
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
Click to expand...
Click to collapse
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)

Marvlesz said:
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Click to expand...
Click to collapse
Thanks,
I will give it a go!
Have already downloaded toolkit, and just watching the video on how to use...
Matt:fingers-crossed:

So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...

try the links below, it might help

matt_tee said:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
Click to expand...
Click to collapse
I don't use magldr, so I am not sure.
But I think you have to "MAGLDR recovery update" first, and then after it finishes you have to "magdlr repartition". Im not sure though.

How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?

After Task29 (don't do task29 again) you have to do the following: http://forum.xda-developers.com/showthread.php?p=25781675#post25781675 until you see the "recovery" .. from there, dont continue to flashing wp7, just put your rom on your sd and flash it from recovery. (don't forget to thank the the one who made the thread/guide)
Don't forget to NOT use 300mb, but use the one written on your rom's thread.

matt_tee said:
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
Click to expand...
Click to collapse
You can't have CWM without MAGLDR. If you've flashed CWM you shouldn't have lost MAGLDR at all, so I don't know what you did wrong. Task 29s are also almost always useless and unnecessary, if a guide says 'task 29' as the first step then usually you can just skip that part. I find that the best guide is the one in my sig, try it out.

[Q] L7 Cyanogenmod10 BOOTLOOP

okay so i have rooted my p700, installed CWM, and flashed cm10... after that i rebooted my phone (i needed to in order to get link2sd to recognize my external sd), after that the CM went into a bootloop!! which got me very angry (considering it came at a very bad time)... so i reflashed it a number of times even tried older builds...still all i get is a hot processor and a bootloop....i have gone through so many forums, scavenged the whole internet for methods on fixing it but still no luck...anybody have anyway of fixing this? and one more thing after i formated my sd (trying to make partitions for link2sd i lost my backup )

try download latest CM10 and reflash it . Make sure follow the steps correctly
How to Install::
Download the ROM
Put it on your phone root
Reboot In Recovery(MAKE A BACKUP BEFORE DOING ANYTHING!)
Wipe Data/Cache,Wipe Cache,Wipe Dalvik Cache(Which you can find in Advanced)
Select Install ZIP from SDCard
Select the ROM and let it install,then also Install GAPPS.

Need More
slingswish said:
try download latest CM10 and reflash it . Make sure follow the steps correctly
How to Install::
Download the ROM
Put it on your phone root
Reboot In Recovery(MAKE A BACKUP BEFORE DOING ANYTHING!)
Wipe Data/Cache,Wipe Cache,Wipe Dalvik Cache(Which you can find in Advanced)
Select Install ZIP from SDCard
Select the ROM and let it install,then also Install GAPPS.
Click to expand...
Click to collapse
I did that and i got a blck screen with both the menu and back button lighten up,rebooted 2 and now i got the CM animation screen, not sure but i think its in a bootloop again been there for 3mins

Wierd
I just noticed that if i pull my sd-card out during the booting process the bootloop ends! wierd huh, anyway around it?