Database Users

bricked streak, help

hi
my streak is heavy bricked
my computer was freeze during loading stock recovery.
now streak is like brick. computer can't find him.
i tried streakflash volume up+plug usb, but computer can't find any new device.
is something what i can to do, before sending to service?
many thanks for help.

there is a streak unbricking guide in the streak Q&A here at xda

Can you show me this guide please.
because i don't know what you mean

wojtas29 said:
Can you show me this guide please.
because i don't know what you mean
Click to expand...
Click to collapse
dw dude all hope is not lost..
ive bricked my streak b4.. pretty badly like u said.. if u do enough searching around ull find a guide.. i did.. just dont remember where
good luck

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

wojtas29 said:
hi
my streak is heavy bricked
my computer was freeze during loading stock recovery.
now streak is like brick. computer can't find him.
i tried streakflash volume up+plug usb, but computer can't find any new device.
is something what i can to do, before sending to service?
many thanks for help.
Click to expand...
Click to collapse
Google multi recovery flasher. Load it on your C drive and open it in cmd. Start your Streak in Fastboot, connect the two via usb, then in the DOS screen select the recovery you want to try. You might want to scan over the instructions that come with it, but its pretty simple and worked on the first try for me.
Good luck!

did you read what i write?
power button does not work.
is not possible to turn on device, is not possible to get fastboot mode.
on board: Steakdroid 2.3
phone is bricked due pc failure during loading stock recovery.
what i can to do before sending this brick to service?
-just send, warranty will be probably valid.
-create other damage for masking unsuccessful flash

What does happen when you connect to the wall charger, does it recognize the charger. If your answer is no, then your device is totally bricked and the only way is to resurrect it using JTAG. BUT BUT, it is not sure that your mobile will be total functional i.e. you will not be able to use the SIM card. The device will be as WiFi only. Hence, it is better to send it to service if it is still under warranty.

Brick not!
OMG! your Dell streak is not brick dude. QDLtool is your best friend, now go and learn how to use it.
Here is the link: http://streakdroid.com/modules.php?name=Downloads&d_op=viewdownload&cid=2
Download streakflash.zip and unzip to your desktop
Download qdtooll-to-309-repairtool.zip and unzip to your desktop
With Dell Streak in off mode, press and hold Volume up while plug in your data cable (I know you have done this ... yeah .. yeah)
Start up QDLTool.exe in unzipped folder streakflash and select RUN.
(should you get driver error then search, download and install then start again)
Start up QDLTool.exe in unzipped folder qdtooll-to-309-repairtool and select RUN.
On completion, Dell will boot into Android 2.2
Job Done.
FYi, my Dell Streak was in various dead conditions (including what your is now - by accidentally removed my data cable while flashing a new Rom LOL) and every times I was able to recovered with QDLTool.
If this is beyond then you are better of return it to base for service. GOOD LUCK TO YOU!

wojtas29 said:
The man said:
computer can't find him.
i tried streakflash volume up+plug usb, but computer can't find any new device.
.
Click to expand...
Click to collapse
streakflah obviously that can not be used. My advice is service. They would hardly know it is flash. Format your memory card on another device before sending it.

muteman3 said:
streakflah obviously that can not be used. My advice is service. They would hardly know it is flash. Format your memory card on another device before sending it.
Click to expand...
Click to collapse
Not necessary, issue maybe drivers corrupted on the PC. Pressing volume up while inserting the data cable will have no response on the PC apart from a beep sound. It is only until QDLTool prompted Driver error otherwise.

Sos! Help: Broken download mode

Hi guys, so I flshed a wrong kdz file on my D801 wind canadian variant, no my phone stuck on LG logo boot screen with green led, i have no fastboot mode, no twrp recovery, I can just access default recovery to hard reset, when i try to enter download mode by pressing volume+ while pluging the phone to pc, it goes just to frst screen, i mean the download mode logo with blue dots!!!!
Please any help would be appreciated, I'm ready to pay for fixing it as i live in a country where my phone won't be fixed otherwise. please please.

Helppppppppppppppppppp Please please just answer me

Up up up up up up up up up up

devdassi said:
Up up up up up up up up up up
Click to expand...
Click to collapse
bud same thing happened to me. and unfortunatly there is no fix for this. everytime i turned my phone on i got the little android guy then it would stay on lg screen with blue and green LED. try download mode it goesto the first screen of little blue dots.
since warrenty should not be able to tell anything about root or etc. i sent it in. in the mean time i called my carrier company and they sent me out a new phone for 35$. but i have to send old one back wether it ges fixed or not.
sorry bud but there is no way back from that. even tho your computer gives it a port its not fully booting so you cant flash anything..... here is one last thing you can try................ this could be your only hope.......it didnt help me but it might work for you...
good luck
http://forum.xda-developers.com/showthread.php?t=2582142

jester12345 said:
bud same thing happened to me. and unfortunatly there is no fix for this. everytime i turned my phone on i got the little android guy then it would stay on lg screen with blue and green LED. try download mode it goesto the first screen of little blue dots.
since warrenty should not be able to tell anything about root or etc. i sent it in. in the mean time i called my carrier company and they sent me out a new phone for 35$. but i have to send old one back wether it ges fixed or not.
sorry bud but there is no way back from that. even tho your computer gives it a port its not fully booting so you cant flash anything..... here is one last thing you can try................ this could be your only hope.......it didnt help me but it might work for you...
good luck
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
thank you so much sir for replying, what is really wierd is that when i connect it to my pc, kingo root detects it, and gives me the option to root, then the rootin process stops at fetching scripts.

I cannot read.

Gnarfsan said:
If you can do that, you should be able to fix it via that Ubuntu guide to restore the partitions I think...?
Link: http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
I was able to connect to pc like he was. And kingo saw it but about 2 mins everything failed. No matter what port name i gave is. Any flash tool as well. And ubuntu did not work for me. Altho i did suggest that ubuntu method just incase it does work for you. Exhaust all options before giving it up for repair or warrenty exchange good luck and i hope you are more secessful then i was. Altho rogers did send me out a new phone good luck

thank you guys , my phone when on lg logo, and connected to pc, i can see it in device manager under modem as LGE android net usb modem,
and under ports as LGE android serial port com 8, any chance or sign of live to my phone, as mentionned before, there is no waranty services in our country.

@ jester12345 Did ubuntu read your phone when you tried the method of flashing partitions?

devdassi said:
@ jester12345 Did ubuntu read your phone when you tried the method of flashing partitions?
Click to expand...
Click to collapse
No ubuntu did not see my phone. Only my pc did even tho my phone wouldnt finish booting.

Could there be a paid fix? I'm ready to pay to bring my phone to life again.

[Q] LG G2 bricked, with disabled usb debugging ( PLEASE HELP!)

I rooted my lg g2 D802, put cwm recovery and flashed cyanogenmod 11. It worked perfectly for 80 hours, when my battery died. I tried to recharge it but my phone won't boot anymore, I only see lg logo. I can't get into recovery, but i can get into download mode. I tried flashing stock ROM through PC but it doesn't work. PC recognizes phone in ports but when I start Flashtool it just says "Waiting for Connection". After reading tons of threads about bricked phones, it seems that phone has to have USB debugging enabled. When i flashed cyanogenmod USB debugging was disabled. And now my phone is bricked with USB debugging disabled.
Please help me to restore my phone, I'm desperate now. I've been trying various methods for 3 days and nothing seems to work. What should I do?

I managed to recover my phone.

blackdeath995 said:
I managed to recover my phone.
Click to expand...
Click to collapse
HOW?

blackdeath995 said:
I managed to recover my phone.
Click to expand...
Click to collapse
Please tell how, I'm trying to unbrick my phone for hours..

If you have lg logo use lg support tool. I had the same problem and it restores my phone to factory firmware. Dont get scared if you see a lot of ?????????? On lg suppor tool. Just look for the options.....check where the options are before connecting phone because when plugged letters change to ??????. Works 100% for me.
Sent from my LG-D801 using XDA Premium 4 mobile app

My case is different, here's the thread http://forum.xda-developers.com/showthread.php?t=2694212

Stefanakii said:
Please tell how, I'm trying to unbrick my phone for hours..
Click to expand...
Click to collapse
To be completely honest, I'm not sure how exactly did I manage to unbrick it. I tried to dig something with adb and fastboot. I don't know what exactly did I do but I didn't get any visible result. In my desperation I tried to enter recovery (power + down) once again (after at least 10 attempts during these 3 days) and it somehow worked. Then I flashed ROM that was already in my memory. It seems that my problem was consequence of OTA update.
I'm new with android so I'm still noob. I'm sorry that I can't help more.

i have a same problem if u solve it

Did you try doing an upgrade recovery using LG Mobile Support Tool on Windows 7 machine?

Hard bricked my LG2, help?

Hi guys. I did something very stupid and by mistake flashed wrong version of AutoRec on my LGD802. No I am stuck od "fast mode started", what ever I do. Is there any help for that device or I just need to take it to service and pay the bill. Thanks. Very stupid mistake.

Tried going back to stock?
You know, there is not much we can do without details.

robogo1982 said:
Tried going back to stock?
You know, there is not much we can do without details.
Click to expand...
Click to collapse
(860) Fastboot mode started
(910) udc start
And that comes after everything, fastboot or download mode or white screen. Windows 7 cant recognise it, I installed drivers before connecting G2 but under SM buss controller there is nothing recognized.
I would try to going back to stock but I dont know how and I am afraid that that will be hard without windows recognizing G2. Sry my english is not so great. I am from Croatia. Thanks for very fast response.

roki4 said:
(860) Fastboot mode started
(910) udc start
And that comes after everything, fastboot or download mode or white screen. Windows 7 cant recognise it, I installed drivers before connecting G2 but under SM buss controller there is nothing recognized.
I would try to going back to stock but I dont know how and I am afraid that that will be hard without windows recognizing G2. Sry my english is not so great. I am from Croatia. Thanks for very fast response.
Click to expand...
Click to collapse
I tried few way to go back to stock but nothing works. G2 is recognized like Android phone but like USB Modem Phone ADB so I am stuck. I am not even sure that battery is charging and I could end up with paper weight soon.
I get in download mod for like half of the second and then Fastboot mod started takes over. Two big problems no download mod and G2 in windows 7 64. Hard reset doesn't work neither, Fastboot takes over again. How stupid i was not to look what file is downloading, first is the newest I thought in my stupid head.

if while plugged into the pc using adb devices it shows up we can save the phone

XxZombiePikachu said:
if while plugged into the pc using adb devices it shows up we can save the phone
Click to expand...
Click to collapse
Thanks for giving me some hope. I never planned to root that phone until I saw that great Xdabbebs Camera Mod. Rooted with no problems and that screwed it up like a overexcited 10 year old. I still got warn out GS3 for usage, works fine but looks like crap but that G2 screen all black hurts a lot.

roki4 said:
Thanks for giving me some hope. I never planned to root that phone until I saw that great Xdabbebs Camera Mod. Rooted with no problems and that screwed it up like a overexcited 10 year old. I still got warn out GS3 for usage, works fine but looks like crap but that G2 screen all black hurts a lot.
Click to expand...
Click to collapse
well like I mentioned if it is seen by adb devices we should be able to be fixed by flashing the correct partitions with fastboot

3 in the morning here. Thanks. I look info it tomorrow
Sent from my GT-I9300 using Tapatalk

roki4 said:
3 in the morning here. Thanks. I look info it tomorrow
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
ok then

Something new on the screen. I ve installed ADB drivers and no I have"fastboot OEM unlock" and "partition get size 104576 bytes" and it stands there. ADB still can find device and G2 is still shown as Android phone, USB modem ADB port.
Also got hardware key control mode

I ve got download mode thansk to this
http://uncle-yakuza.jouwweb.nl/lg-g2-fast-boot-menu-fix
Guys i really need tome help what to do next. How to flash from download mod, link please.. I got KDZ

back to stock guide
Sent from my Potato powered G2 D800

I did it after everything that could go wrong did. Thanks for your support.
Link I posted above works if someone is stuck in fastboot with nothing else..
On more thing. Phone is now unrooted. At least root checker says so. That is normal I suppose.

LG G2 Bricked, Need urgent assistance.

I need some serious help guys. Phone is stuck at boot logo and wont turn on. IT wont enter recovery mode. it wont hard reset. It wont enter download mode.
The phone was completely stock originally. So i rooted using towelroot and ran the 'AutoREC' program. That did its thing and restarted and got stuck in fastboot mode. couldnt get out of it. Eventually managed to reflash all the original stock ROM partitions and it started to boot again... only to get stuck at the LG logo. I need some serious help.
PC wont detect the phone at all and its as if there is no OS on the phone. I have the D802 variant 32gb.

which kdz variant did you flash.

v.konvict said:
which kdz variant did you flash.
Click to expand...
Click to collapse
D80220C_00
got it from "lg-firmware-rom" after entering my imei

spookyleaf said:
D80220C_00
got it from "lg-firmware-rom" after entering my imei
Click to expand...
Click to collapse
same thing happened to a d802 of a friend of mine. but he flashed the d802h variant. will keep you posted if i find a way out.

I am in the same position. Except I tried to flashify stock recovery on d800 at&t variant. I wanted to install the stock update because I was still stock. Just root with twrp before...I had the sprint variant before the ls980 and it never screwed me over like this. I'll post if I figure anything out... I got to get ahold of shellnutt... He's the g2's god.

Dam. Leme me know what happens
Sent from my Nexus 5 using XDA Free mobile app

spookyleaf said:
Dam. Leme me know what happens
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried both ways to enter recovery?
Push PWR + Vol Down till you see the LG Logo then release and press both again
Push PWR + Vol Down till you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
If you can see the LG logo I think you are not Hard Bricked

I haven't tried that exactly. I'll give it a shot when I get a chance
Sent from my Nexus 5 using XDA Free mobile app

You may want to check your internal hardware to be sure it's marked as a D802. Typically the feint white stamp in the lower center/left of the phone with rear cover removed is the true model number. It's also stamped on the board and on the ribbon cables going up eithe side. Your device is showing the signs of a false d802 which has become sadly common in recent months.

If it's legit d802 then flash aboot, boot, laf and power it off.
Then hold voume up and connect to pc while still holding volume up.
Make sure you have the drivers installed, fire up lg mobile support tool or the lg flash tool 2014 (you need your kdz file now - find it using your imei and lg-firmware site)

Okay so I found this: http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to get it to come up as a device in Windows and Linux. And this: http://forum.xda-developers.com/showthread.php?t=2582142 I'm sure you read this but you need to do it after following the first guide. I already have a Linux installed and I'm going to try today. I'll update with a guide for you only if you need it and if I succeed. I just need to remind you. You CANNOT mess up on the second guide... Well as far I can tell. But if the first guides label is actually true then maybe I'm wrong.

ok so ive ordered some tools to open up the phone and check the internals. Hopefully its a legit G2. Meanwhile every single possible combination of the power and volume keys does absolutely nothing. If all else fails ill try shorting the capacitors as ive seen on a guide from here and hopefully that will be the end of it. Thanks for all the input guys. Ill keep you posted!

darkpower_4 said:
Okay so I found this: http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to get it to come up as a device in Windows and Linux. And this: http://forum.xda-developers.com/showthread.php?t=2582142 I'm sure you read this but you need to do it after following the first guide. I already have a Linux installed and I'm going to try today. I'll update with a guide for you only if you need it and if I succeed. I just need to remind you. You CANNOT mess up on the second guide... Well as far I can tell. But if the first guides label is actually true then maybe I'm wrong.
Click to expand...
Click to collapse
thanks i appreciate that very much. Keep me informed on how it goes. Fingers crossed!

spookyleaf said:
ok so ive ordered some tools to open up the phone and check the internals. Hopefully its a legit G2. Meanwhile every single possible combination of the power and volume keys does absolutely nothing. If all else fails ill try shorting the capacitors as ive seen on a guide from here and hopefully that will be the end of it. Thanks for all the input guys. Ill keep you posted!
Click to expand...
Click to collapse
Plug it into a windows machine, open device manager and look for Qualcomm qhsusb_bulk. If you get that, you're already in bulk and don't need to worry about shorting capacitors. If it's not being recognized in any way, you may be forced into that as a last resort.

spookyleaf said:
ok so ive ordered some tools to open up the phone and check the internals. Hopefully its a legit G2. Meanwhile every single possible combination of the power and volume keys does absolutely nothing. If all else fails ill try shorting the capacitors as ive seen on a guide from here and hopefully that will be the end of it. Thanks for all the input guys. Ill keep you posted!
Click to expand...
Click to collapse
All you really need to open it up is a guitar pick. It pries apart make sure you take the sim card out. After that it's going to take a little swipe around the edge and it'll pop open no problem.

iowabowtech said:
Plug it into a windows machine, open device manager and look for Qualcomm qhsusb_bulk. If you get that, you're already in bulk and don't need to worry about shorting capacitors. If it's not being recognized in any way, you may be forced into that as a last resort.
Click to expand...
Click to collapse
I checked that already. Not going into bulk mode. Seems like the capacitors are my last resort

so ive poped the phone open and guess what... its not a D802.. its a D800.. the at&t version... wtf.. no wonder i bricked it. gonna see if i can use the unbrickable method

did you checked the IMEI?

nope its says on the speaker grille after you remove the back cover. "D800"

how is that possible? did phone information apps showed your device as 802 aswell? did kernel info and phone info in system settings lied too?