Database Users

DE-BRICK DELL STREAK (completely Bricked)

Dear All experience developers,
I am actually a newbie, If what I said is wrong please correct it, I post this post here because I think it's related to developer rather than others, even it's talking about de-brick.
I have a black DELL STREAK (31800-EU), but because I have done something wrong (fastboot erase system -w, and it hanged at erasing CATCH, and I disconnect the cable and pull-out battery to go to recovery and install .pkg file), it's now seem completely dead with nothing happen no matter what combination key I use (Vol-Up + Vol-Down + Power, Camera + Power, Vol-Up + plug USB cable for QBL) nothing happen for me).
As I go around, I saw the teardown page http://www.ifixit.com/Teardown/Dell-Streak-Teardown/3512/2, they have mentioned that there is a secondary 2GB microSD used to house the system and data, so DO YOU GUYS THINK THAT WE COULD DE-BRICK MY DELL BY RE-WRITE THIS HOLD 2GB CARD WITH A IMAGE FROM SOMEONE WHO HAS HIS DELL IN WORKING?
Question to all experience developers,
I know all you guys are really strong understading about DELL Streak,
Q1- In the teardown page, they found 2GB microSD + Hynix H8BES0UU0MCR NAND-based MCP, so microSD should be ROM and the Hynix... should be device RAM, isn't it?
Q2- What is a NAND backup means, when you guy used to do it on other Android devices, is it a full backup of device ROM?
Q3- I maybe can try to use 1 of your provided NAND backup file to byte-copy to a new 2GB microSD for test.
Thanks.

first question, what were you trying to achieve by running that command!
second, could you not push a new image over to it via fastboot? removing it cleared the memory and it seems theres nothing there for it to boot from, so you'd have to try and get the sd card out (does involve tearing the whole thing apart, have done it myself) to see if you can restore anything to it.

SokRatha said:
Dear All experience developers,
I am actually a newbie, If what I said is wrong please correct it, I post this post here because I think it's related to developer rather than others, even it's talking about de-brick.
I have a black DELL STREAK (31800-EU), but because I have done something wrong (fastboot erase system -w, and it hanged at erasing CATCH, and I disconnect the cable and pull-out battery to go to recovery and install .pkg file), it's now seem completely dead with nothing happen no matter what combination key I use (Vol-Up + Vol-Down + Power, Camera + Power, Vol-Up + plug USB cable for QBL) nothing happen for me).
As I go around, I saw the teardown page http://www.ifixit.com/Teardown/Dell-Streak-Teardown/3512/2, they have mentioned that there is a secondary 2GB microSD used to house the system and data, so DO YOU GUYS THINK THAT WE COULD DE-BRICK MY DELL BY RE-WRITE THIS HOLD 2GB CARD WITH A IMAGE FROM SOMEONE WHO HAS HIS DELL IN WORKING?
Question to all experience developers,
I know all you guys are really strong understading about DELL Streak,
Q1- In the teardown page, they found 2GB microSD + Hynix H8BES0UU0MCR NAND-based MCP, so microSD should be ROM and the Hynix... should be device RAM, isn't it?
Q2- What is a NAND backup means, when you guy used to do it on other Android devices, is it a full backup of device ROM?
Q3- I maybe can try to use 1 of your provided NAND backup file to byte-copy to a new 2GB microSD for test.
Thanks.
Click to expand...
Click to collapse
Android Development is for
Hacks, Mods, Fixes, Reference, and Tutorials
*All Questions and Requests should go in the General Section
or the Q&A Section
Thank you
Moving to General

Firstly I have owned a G1, and dev just say try to wipe system before you flash new ROM to avoid boot loop, so I just follow it.
Currently, the phone is completely not boot even fastboot or Qualcom Dianostic mode. And that is why I am trying to ask someone if they could byte copy their internal 2G SD for me and I can try to tear my phone out to retore the SD.
Please kindly advide me if I could have other option to retore the SD, I can try to tear my phone out.
Thanks, Ratha

Please tell me this was resolved as I have encoutered basically the very same thing. My phone... well brick, won't do a damn thing. Very appreciative of anyone who is willing to help.

Have you tried qdltool? I think the os is on the nand not the 2gb internal card, so if its fubar'd I don't think there is a way to fix it. Turn off your streak and hold volume up as you plug it into your computer, if your computer detects it then there may he hope via qdltool. I'm a noob also so take that for what its worth.
Sent from my HTC Vision using XDA Premium App

hi, I had very similar prob. but after a sleepless night I found CAMERA button work as power button. so wht I did, press and hold vol up and camera button thn plug the usb in pc. it should bring u diagnostic mode. press and hold camera button thn plug the usb it will bring u fastboot. after just use qdl tool.it work for me. u can try. but the prob is ever since I did tht I always need usb power to start mobile and battery health doesnt show.
Sent from my Dell Streak using XDA Premium App

sajibcy said:
hi, I had very similar prob. but after a sleepless night I found CAMERA button work as power button. so wht I did, press and hold vol up and camera button thn plug the usb in pc. it should bring u diagnostic mode. press and hold camera button thn plug the usb it will bring u fastboot. after just use qdl tool.it work for me. u can try. but the prob is ever since I did tht I always need usb power to start mobile and battery health doesnt show.
Sent from my Dell Streak using XDA Premium App
Click to expand...
Click to collapse
Honestly, above solution is a bit strange but it worth a try please try and confirm. If this does not work then the only solution is to JTAG your device using Riff Box which will resurrect your mobile BUT!! from my experience and others in this forum and other forums your device will not recognize the SIM card any more. Therefore, take care. Once you try Riff Box, please leave a feedback of your experience.

iT iS Me said:
Honestly, above solution is a bit strange but it worth a try please try and confirm. If this does not work then the only solution is to JTAG your device using Riff Box which will resurrect your mobile BUT!! from my experience and others in this forum and other forums your device will not recognize the SIM card any more. Therefore, take care. Once you try Riff Box, please leave a feedback of your experience.
Click to expand...
Click to collapse
well i did every tricks but nothing, i order a new battery and a desktop charger. that will be the last things to check.now i cant cus i dont have any spare battery around me. but mobile is working perfect except this prob. and i have warrenty. i just dont send cus i m afraid they will take long time to fix.

I can bring your Streak back to life using JTAG. Just pm me if you are interested. I help hundreds a month on many of the Galaxy S variants and can perform similar methods to bring the Streak back to life.

connexion2005 said:
I can bring your Streak back to life using JTAG. Just pm me if you are interested. I help hundreds a month on many of the Galaxy S variants and can perform similar methods to bring the Streak back to life.
Click to expand...
Click to collapse
thanx man. i appreciate it. but i think i will send it for warranty. i bought it before 1 month only and i mess up

u might wanna try this method (attached bellow) if it doesnt ork then u need jtag flash...

I debricked mine changing it's internal SD with an 8gb one.

netomx said:
I debricked mine changing it's internal SD with an 8gb one.
Click to expand...
Click to collapse
can you explain how you did this?

netomx said:
I debricked mine changing it's internal SD with an 8gb one.
Click to expand...
Click to collapse
I need to know as well.
Sent from my Dell Streak using Tapatalk

[Q] unbrickable ideos x5?

Hi, I think this is my first post here. Anyway, here the question:
I have an Ideos X5 (not pro), it is bricked. So far, I have followed instruction for recoveries from several threads, but none of them worked because in my phone:
there is no boot screen
there is no pink screen
there is no logo
there are no images of any kind (screen wont even turn on)
it only vibrates when I plug it into my computer
Also *sometimes* the buttons light up and when this happens windows detect a new USB device, but after I while it dissapears again. Also, this happens only with the battery on.
The phone became bricked after I followed instructions to revert back to froyo from gingerbread (wifi wasn't working). All roms were originals from Huawei.
So, any suggestions??
Thanks in advanced.

I had a problem like you.I have deleted amss.mbn file because Huawei locked pink screen, it was bricked But i wasn't so patience enough, i sent my phone to technical care.But here are the answers, try it with caution:
shuiyunxingzuo said:
Hi
Space is not enough to flash any ROMs;
Bootloader is locked,you could not edit that sector.
So is there a special ROM that is very small and allows to edit the bootloader?
Here is the MINI ROM:
http://www.mediafire.com/?7c33h84a974va28
Flash it than edit the bootloader~
NOTICE: I format the whole sector ,and the file including IMEI was missing
'Cause I don't know how to edit recovery or other system files like .mbn,
so just delete the abnormal big file and you would be able to flash any ROM s
Click to expand...
Click to collapse
xmsnx said:
Yes!!!! My phone works"!!!!!!!
Ok here's what I did
Download mediafire.com/?1hbk6n46hgamyt6
Unzip it, and find UPDATE.APP
Put UPDATE.APP in a dload folder and upload to empty sdcard.
Put sdcard in phone, and hold vol+/- and power and flash it.
After phone has restarted pull battery.
Download http://www.mediafire.com/?6hrfz36b8e2vw87
Unzip and copy the dload folder to empty sdcard.
Hold vol+/- and power and flash it.
After it fails near the end or if it restarts then pull battery.
Download a rooted boot.img and a clockworkmod recovery.img (got both mine from links at modaco)
Attach phone to PC in pink screen mode and delete the boot.img and recover.img files.
Upload the downloaded root.img and recovery.img to image folder in phone.
Download any custom rom from XDA, I used http://forum.xda-developers.com/showthread.php?t=1475687 and upload it to sdcard
Pull battery.
Hold vol+ and power and go into clockworkmod, wipe everything and flash the custom rom!!
Good luck!
Click to expand...
Click to collapse

Tried taking off the battery for 10 seconds and after that inserted USB into computer (without battery)? Also try to take off battery and insert USB to wall-charger.
The buttons lighting up could be our way out, but if it only stays there for a couple of seconds it doesn't help. Can you see what Windows detects?

Hi again,
thanks for answering.
None of your suggestions worked anyway, because it won't even load anything from the sdcard, it just makes a short vibration and nothing more.
I managed to get the lights on again, but windows didn't show what kind of device it was, maybe because it's already installed but I'm not sure which usb device is it (windows did make a sound though, like "device is connected" sound). Also I noticed there's a red led blinking near the speaker, does that mean anything?
Anyway, tried to flash while the lights were up but it did nothing, and after two minutes the went off again.
Thanks again for your suggestions.

I connected the phone to my laptop with ubuntu, and despite I cannot do anything with the phone, there are two devices created in /dev: hiddev0 and hidraw0. Is there a way to flash the device using any of those files?
thanks again.

Worth a try on this post : Here

It is fried then

Try mounting those two devices, is there any file system recognized? It might not be bricked, but this is an issue probably nobody has had yet. Send it in for repair if it is still within warranty.
Important question: How did this even happen?
XphX

XphX said:
Important question: How did this even happen?
Click to expand...
Click to collapse
auxorro said:
The phone became bricked after I followed instructions to revert back to froyo from gingerbread (wifi wasn't working). All roms were originals from Huawei.
Click to expand...
Click to collapse
Sent from my U8800 using Tapatalk 2

Hi,
thanks for all the help.
Sadly nothing works with this phone, I tried mounting and dd from the devices but nothing happens.
I guess I'll send it for repair (hope it's still within warranty)
Anyway, thanks again for all the suggestions.
Bye!!

auxorro said:
Hi,
thanks for all the help.
Sadly nothing works with this phone, I tried mounting and dd from the devices but nothing happens.
I guess I'll send it for repair (hope it's still within warranty)
Anyway, thanks again for all the suggestions.
Bye!!
Click to expand...
Click to collapse
If the phone wasn't rooted, then it is still within warranty

[Q] I am bricked! please help!

I flash a wrong kernel (A Nexus 7 kernel), and my nexus4 become brick. No matter what I did, it still no response. I can't boot to fastboot, even i can't turn it on. Please help....

connect to PC, only show a QHSUSB_DLOAD in Device Manager. But still can't turn it on. Please help, anything i can do to fix it??

Read through the ENTIRE other thread you posted in, all the info is there.

No idea how you accidently flash wrong a kernel for the wrong device.
Get into bootloader mode. (can you? Google on how to do it manually)
Or
Plug the phone in via usb if you had adb used on it and type adb reboot bootloader (hence if use toolkit you won't have this set up.)
Sent from my Nexus 4 using xda premium

These guys are way to eager to flash any and everything on there devices

yyz71 said:
These guys are way to eager to flash any and everything on there devices
Click to expand...
Click to collapse
It just seems impossible on finding kernel for other phones on a nexus 4 forum.
Oh what's this? A link to a flash able zip? Let's flash it without thinking.
Think before you flash op.... And dont use toolkits.
Sent from my Nexus 4 using xda premium

zephiK said:
It just seems impossible on finding kernel for other phones on a nexus 4 forum.
Oh what's this? A link to a flash able zip? Let's flash it without thinking.
Think before you flash op.... And dont use toolkits.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
So true:good:

I can't connect PC with adb. I connect PC can't show the charge icon in my phone. And PC can only identify the device as QHSUSB_DLOAD.
So, what can i do..?

yatyuk said:
I can't connect PC with adb. I connect PC can't show the charge icon in my phone. And PC can only identify the device as QHSUSB_DLOAD.
So, what can i do..?
Click to expand...
Click to collapse
Send that puppy back, & get a new one...
Sent from my HTC One X using xda premium

rayford85 said:
Send that puppy back, & get a new one...
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I really dislike people recommending to send the phone back (RMA) to Google for a user's own (I'll be polite here) lack of awareness and understanding of what they are doing. This person should continue to look for solutions to get it working and if not.. well, to bad. Lesson learnt. Buy another Nexus 4.
Besides that fastboot should still be accessible. If OP can eventually get into fastboot then all will be well.

Go read read FAQ thread,will show yo proper way to get back to bootloader mood don't be lazy that won't help,agree getting to bootloader mode then fastboot proper n4 kernel.try it on other pc I'd you cannot in this pc,make sure you install the driver.
Read before you ask
Sent from my HTC One X using xda app-developers app

Zackconsole said:
Go read read FAQ thread,will show yo proper way to get back to bootloader mood don't be lazy that won't help,agree getting to bootloader mode then fastboot proper n4 kernel.try it on other pc I'd you cannot in this pc,make sure you install the driver.
Read before you ask
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Bro, i already read some thread... but still not work...i try any combine key with connection to PC, and only red LED appeared few sec and then off again. I think i had driver, because i can use toolkit, unlock and root via adb before. Or can u please give me the link which i need to read? I search about the "qhsusb_dload" problem. Some tell me can easy to fix it by using power+ Vol+/- with connection to PC. But i try many times, still not work... I know i can fix it, if i can enter bootloader. But now i can't turn my phone on.... any suggestion? Thank you.

yatyuk said:
Bro, i already read some thread... but still not work...i try any combine key with connection to PC, and only red LED appeared few sec and then off again. I think i had driver, because i can use toolkit, unlock and root via adb before. Or can u please give me the link which i need to read? I search about the "qhsusb_dload" problem. Some tell me can easy to fix it by using power+ Vol+/- with connection to PC. But i try many times, still not work... I know i can fix it, if i can enter bootloader. But now i can't turn my phone on.... any suggestion? Thank you.
Click to expand...
Click to collapse
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!

risktaker84 said:
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
Click to expand...
Click to collapse
I read your post already bro!! Thanks for your help. But, i don't understand #241. How can I get into fastboot mode?
Is the first step "1) Once in Fastboot mode, through Nexus 4 Toolkit I flashed the Clock Work Recovery. " ?
Now I connect my phone to PC, then Power + Vol- for ~10sec, my phone will had red led for few second and then off again.

risktaker84 said:
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
Click to expand...
Click to collapse
Bro, can you please teach me how to enter fastboot mode? I try using all combine key with connection to PC, but only red led appear for few second then off.

I like how all the people who manage to do something so idiotic to these phones band together and stick up for each other. There is no possible way to flash the wrong nexus kernel. any who, the solution has been posted plenty of times. Enter recovery then fast food.
Sent from my Nexus 4 using xda premium

yatyuk said:
Bro, can you please teach me how to enter fastboot mode? I try using all combine key with connection to PC, but only red led appear for few second then off.
Click to expand...
Click to collapse
To get into Fastboot:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
So for all the people with Bricked devices all hope is not lost. Follow this procedure to get into Fastboot.
1) Press the Power button for more then 5 seconds to do a Hard Reset. This is where you screen is completely turned off.
2) Now take your LG manufactured USB connect it to the PC. Do not connect it to the phone just yet.
3) Holding the Vol Down and Power together and NOW connect your other end of the USB connector to the phone and then your phone should give you a slight vibration and you should see the Fastboot screen (Android lying on the back)
NOTE: Make sure as soon as you see then fastboot mode Let go of the Vol and Power Button right away!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse

risktaker84 said:
To get into Fastboot:
Click to expand...
Click to collapse
I try many times.....but still can't turn on...
My situation is
1) Press the Power button for more then 5 seconds to do a Hard Reset. This is where you screen is completely turned off.
--->My phone is always turned off, when i disconnect to PC....
2) Now take your LG manufactured USB connect it to the PC. Do not connect it to the phone just yet.
--->This step is ok
3) Holding the Vol Down and Power together and NOW connect your other end of the USB connector to the phone and then your phone should give you a slight vibration and you should see the Fastboot screen (Android lying on the back)
---> when i connect the usb, the phone immediately Red LED on and no vibration. LED on few second, my phone off again and remind no response
Is that mean no hope

yatyuk, use this thread for further inquiry LINK. I don't want to go back and forth in between different threads with the same issues.
Try this,
Did you ever get a Battery sign when you had it connected to the PC or AC for power?
Try this, I don't know if its gonna work or not but plug your phone in the wall receptacle for AC Charge and leave it for a while. On AC, the phone most likely, if completely dead, will stay idle but most likely jump back to Battery sign showing its charging or not.
When that happens, leave like that for a hour or two.
Let me know what happens. Good luck.
Click to expand...
Click to collapse

Thank you for your friendly help
I had read your post already, and i will keep on trying...

Can Not even get into Download Mode

Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!

xhizors111 said:
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
Click to expand...
Click to collapse
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD

Is is still repairable
Bruce Wayne said:
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Click to expand...
Click to collapse
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??

xhizors111 said:
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
Click to expand...
Click to collapse
Yes, offcouse.
Just let them be unaware of you knowing about root/cwm etc. just act dumb. If they get to know your warranty is already void, they will charge you money for repairing it.

Follow what bruce says..
Tell them u got an update in kies nd this happened
** rooting is new for me,
nd i am a noob to root....**

They said Board is damaged
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!

Please anyone!!
or do refer any book!

xhizors111 said:
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Click to expand...
Click to collapse
The last 'n' only hope left is this:-
Install ur phone specific driver on pc.
1. Take out battery, sim & sd card.
2. Open odin.exe on pc.
3. After this, connect the phone via USB cable to PC(yes! without battery,sim & sd card)
4. Press the download mode combo keys.
5. While keep pressing all those keys, insert the battery now.
6. Now, odin should detect ur phone so that u may get it updated with stock firmware.
And if this also doesn't work, then bro u might have lost it at all
Sent Via XDA™ Premium

Bricked or what?

Hello guys. I have the x720 leeco. My problem is that i wiped all and no rom is installed and when i connect the phone to the pc i cant get it done with the drivers so i cant see the internal storage. I can boot on REcovery and Fastboot. Can anyone help me??
Thanks in advance

TrelosEisai said:
Hello guys. I have the x720 leeco. My problem is that i wiped all and no rom is installed and when i connect the phone to the pc i cant get it done with the drivers so i cant see the internal storage. I can boot on REcovery and Fastboot. Can anyone help me??
Thanks in advance
Click to expand...
Click to collapse
Put the rom on an USB stick, connect the stick to the phone with adapter, go into TWRP and flash the rom.
Easyest solution.

Okk i ll try it

Unlucky cant read otg, just putted an micro usb to typec adapter and a micro usb flash drive and cant see it

TrelosEisai said:
Unlucky cant read otg, just putted an micro usb to typec adapter and a micro usb flash drive and cant see it
Click to expand...
Click to collapse
Ok. Than try to flash a stock rom through all in one tool:
https://www.google.com/amp/s/forum....ment/tool-tool-one-mauronofrio-t3580611/amp/5

Oel said:
Ok. Than try to flash a stock rom through all in one tool:
https://www.google.com/amp/s/forum....ment/tool-tool-one-mauronofrio-t3580611/amp/5
Click to expand...
Click to collapse
Agreed,
You are not bricked.

i cant see my device thats the problem

TrelosEisai said:
i cant see my device thats the problem
Click to expand...
Click to collapse
Worst case you can use Qfil.
But first disconnect all unneeded peripherals, and try another cable if possible. Go read the unbricked tested and working. Search the thread for my name, to everything you need in 3 or four posts
Sent from my Pixel XL using XDA Labs

TrelosEisai said:
i cant see my device thats the problem
Click to expand...
Click to collapse
Yeah, but did you installed the all in one thing with the right drivers?

Oel said:
Yeah, but did you installed the all in one thing with the right drivers?
Click to expand...
Click to collapse
which drivers?? i cant do the qfil cause i cant see the phone in pc. when i open it in leeco logo when i connect the phone to pc it says windows cant recognize it.

TrelosEisai said:
which drivers?? i cant do the qfil cause i cant see the phone in pc. when i open it in leeco logo when i connect the phone to pc it says windows cant recognize it.
Click to expand...
Click to collapse
Go read the unbricking thread, it is going to take you days to read, understand, and finally unbrick it. If you are not seeing the device in the system manager of your computer ( Assuming you have a PC) then maybe you are actually bricked.
But, you own a phone that can be unbricked, no not a big deal. It can be resolved, the instructions in the unbricked tested and working thread are explicit go read it.
I create several how to's within that thread on unbricking, and have updated the links on the software tools needed. I have personally unbricked 7 leeco, and several others unbricked their phones by following the advice of everyone who contributed to the thread.
Everything you need and more is there that thread, waiting for you.
Go there get the files, read the instructions and soon you phone will work again. Do not download the qfil from the Original post...it doesn't work. I don't have the links to paste at the moment, nor the time to search for you Just use the thread search bar and type my name to get consolidated steps read through all of the posts, because its a progression.
There are three methods you can use to unbrick, the easiest method is probably Qfil, and Flash 2.0
Essentially you need the Qfil: le_zl1_qfil_ufs_fix , FlashOne2.0 files, go ahead and download prog_ufs_firehose_8996_ddr just in case. But it should download automatically. You need to follow the steps to get your computer ready to unbrick the phone...all in the thread instructions.
Once you do it once successfully, it will become easier with each try.

tsongming said:
Go read the unbricking thread, it is going to take you days to read, understand, and finally unbrick it. If you are not seeing the device in the system manager of your computer ( Assuming you have a PC) then maybe you are actually bricked.
But, you own a phone that can be unbricked, no not a big deal. It can be resolved, the instructions in the unbricked tested and working thread are explicit go read it.
I create several how to's within that thread on unbricking, and have updated the links on the software tools needed. I have personally unbricked 7 leeco, and several others unbricked their phones by following the advice of everyone who contributed to the thread.
Everything you need and more is there that thread, waiting for you.
Go there get the files, read the instructions and soon you phone will work again. Do not download the qfil from the Original post...it doesn't work. I don't have the links to paste at the moment, nor the time to search for you Just use the thread search bar and type my name to get consolidated steps read through all of the posts, because its a progression.
There are three methods you can use to unbrick, the easiest method is probably Qfil, and Flash 2.0
Essentially you need the Qfil: le_zl1_qfil_ufs_fix , FlashOne2.0 files, go ahead and download prog_ufs_firehose_8996_ddr just in case. But it should download automatically. You need to follow the steps to get your computer ready to unbrick the phone...all in the thread instructions.
Once you do it once successfully, it will become easier with each try.
Click to expand...
Click to collapse
Ok i am starting now i will come back with the results

As i understand my phone is not bricked cause i can go into fastboot and REcovery. The problem is i dont have OS installed so i stuck at Leeco image. The other problem is when i connect the phone with the Pc this happens on device manager. So how i can make it to see the internal storage and put inside the phone the rom.

TrelosEisai said:
As i understand my phone is not bricked cause i can go into fastboot and REcovery. The problem is i dont have OS installed so i stuck at Leeco image. The other problem is when i connect the phone with the Pc this happens on device manager. So how i can make it to see the internal storage and put inside the phone the rom.
Click to expand...
Click to collapse
Install Google's USB ADB and Fastboot drivers.
https://developer.android.com/studio/run/win-usb
Can you boot into download mode (I think it's volume down + power) and then connect to PC. After that, you should see the unknown device on device manager. Try to right-click on it and update drivers. On the next screen, select that you have drivers and you'd like to pick your own (not the Windows Update option!) Then select Manufacturer Google and Fastboot/ADB debugging option. Device might work in fastboot now, you can test by doing "fastboot devices". If that works, then you can install ROM via Fastboot.
If this doesn't work, you can revert changes by going into device manager and uninstalling the driver for that device.

Ascertion said:
Install Google's USB ADB and Fastboot drivers.
https://developer.android.com/studio/run/win-usb
Can you boot into download mode (I think it's volume down + power) and then connect to PC. After that, you should see the unknown device on device manager. Try to right-click on it and update drivers. On the next screen, select that you have drivers and you'd like to pick your own (not the Windows Update option!) Then select Manufacturer Google and Fastboot/ADB debugging option. Device might work in fastboot now, you can test by doing "fastboot devices". If that works, then you can install ROM via Fastboot.
If this doesn't work, you can revert changes by going into device manager and uninstalling the driver for that device.
Click to expand...
Click to collapse
I cant find the option for Manufacturer Google for the Fastboot/Adb debugging options

TrelosEisai said:
I cant find the option for Manufacturer Google for the Fastboot/Adb debugging options
Click to expand...
Click to collapse
Hi, sorry for the late reply.
Are you able to see these in screenshots? Between steps 2 and steps 3, you might need to select Android ADB or Android Device before you can see Google in the dropdown.
Maybe after these you might be able to see device in fastboot?