So I've been running Bonsai 2.0 for a bit, but just today it started where if i power down, it will only power into download mode. I odin'd back to stock and the problem still persists. To be more clear, when i power up normally, just using the power button, it goes into download. Any ideas?
Your one button could be broken
Sent from my SPH-D700 using XDA App
Well as I sit typing this from the phone the one isn't constantly hitting. And I can type the number 1 no problemand even sliding closed doesn't hit the keyboard one. I'm gonna go to sprint n give hell because this is a brand new replacement from insurion and its bs that I'm having this problem after only a week. I know they don't support sammys warnty but there should be at least a 30 day or something
Sent from my SPH-D700 using XDA App
How are you typing on your phone if it only boots into download mode? Does it sometimes boot regularly?
DiGi760 said:
How are you typing on your phone if it only boots into download mode? Does it sometimes boot regularly?
Click to expand...
Click to collapse
I thought the same thing, but perhaps, when the op odins, the phone will boot normally that one time because the power button isn't being used. Odin does reboot the phone if you have the reboot box checked.
Sent from my SPH-D700 using XDA App
Hit the nail on the head. When I odin it boots up fine. But if I try to power reboot or anything, right back into download.
Sent from my SPH-D700 using XDA App
Sounds annoying... Assurion takes replacement phones back up to 30 days after receipt, unless there is evidence of physical/water damage. In which case, you would have to fork over an extra 100 bucks. Remember, they will only send 3 claim replacement phones and then they cancel your insurance.
Sent from my SPH-D700 using XDA App
Did you figure out the problem?
Sounds like it should be covered under Manufacturer's Warranty or Sprint Repair if you have TEP. I think this would be a defect, not accidental damage. Asurion shouldn't come into play.
So I went into the sprint repair center, the guys had no clue what the hell the download screen was. So obviously they had no clue why it was only booting into it. They're replacing it. Still stumped as to what happened.
Wow. That's a crappy service center if they didn't know what download mode is.
DiGi760 said:
Wow. That's a crappy service center if they didn't know what download mode is.
Click to expand...
Click to collapse
Exactly what I thought. I thought that these guys took classes on new devices as they came out? Maybe this guy was sleeping during the download mode section.
Sent from my SPH-D700 using XDA App
Related
Is there a way to power on the evo shift from adb? My power button is broke and I pulled my battery because of a freeze. Any help is welcomed
I am pretty sure that would not be possible seeing as adb is for dealing with software and the power button is a physical button inside the phone can you still take it to a sprint repair center?
Cyanogenized EVO4g nightly 102
Yeah that's a no go. What you can do is turn it off then back on and when it comes to the home screen keep it on by touching it or what have you, and RUU, if you're rooted, and like he said take it to a repair store
Sent from my PG06100 using XDA App
You can find an older version of clockworkmod which actuallu turns on your device whenever you plug it in.
Of course...you gotta turn on the device to install it
Sent from my PG06100 using Tapatalk
I just happen to be a sprint tech and if you like you can pm me and i can walk you through opening your phone and turning it on so you can install the clockwork you need to power on your device when you plug it in.... You will in the long run need to take it to a sprint store though. Not being able to see your device unless you plug it in or get a text call or email may become a pain.
Sent from my PG06100 using XDA Premium App
drewbuchman said:
I just happen to be a sprint tech and if you like you can pm me and i can walk you through opening your phone and turning it on so you can install the clockwork you need to power on your device when you plug it in.... You will in the long run need to take it to a sprint store though. Not being able to see your device unless you plug it in or get a text call or email may become a pain.
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
Major pain I would say
Cyanogenized EVO4g nightly 102
Major is an understatement... You could leave the power button off too but it leaves your device open to dust and other junk.
Sent from my PG06100 using XDA Premium App
You just need to take it to a shop get the button fixed or the phone replaced.
Cyanogenized EVO4g nightly 102
If somehow u manage to turn it on and install cm7 it has an option to use the volume buttons to wake ur phone
Sent from my PG06100 using Tapatalk
My phone took a swim in some water unfortunately. Everything about the phone works except for one crucial part. The power button is completely unresponsive. It half worked for a short while but now its completely useless. I had to download an app to turn off the screen instead of waiting for it to time out. I also had to download an app to reboot the phone since its good to do every so often. I'm trying to avoid paying the $100 water damage deductable to get it replaced. Problem is if my phone ever has the battery drained I won't be able to turn it back on. I highly doubt it but is there any other way of turning on the phone without the power button working? Or is it just FUBAR???
lostrudy said:
My phone took a swim in some water unfortunately. Everything about the phone works except for one crucial part. The power button is completely unresponsive. It half worked for a short while but now its completely useless. I had to download an app to turn off the screen instead of waiting for it to time out. I also had to download an app to reboot the phone since its good to do every so often. I'm trying to avoid paying the $100 water damage deductable to get it replaced. Problem is if my phone ever has the battery drained I won't be able to turn it back on. I highly doubt it but is there any other way of turning on the phone without the power button working? Or is it just FUBAR???
Click to expand...
Click to collapse
If you can get into download mode and odin back to stock and pull the plug half way thru and take it back to sprint and say it won't turn on because of some update and play stupid they'll replace the phone because its a software issue ie error on their part therefore must replace it. Also I've heard odin3 has the ability to control hardware controls never used it myself
Sent from my OG Epic
Biggoron said:
If you can get into download mode and odin back to stock and pull the plug half way thru and take it back to sprint and say it won't turn on because of some update and play stupid they'll replace the phone because its a software issue ie error on their part therefore must replace it. Also I've heard odin3 has the ability to control hardware controls never used it myself
Sent from my OG Epic
Click to expand...
Click to collapse
Don't do this.
algorhythm said:
Don't do this.
Click to expand...
Click to collapse
Worked numerous times why not?
Sent from my OG Epic
Biggoron said:
Worked numerous times why not?
Sent from my OG Epic
Click to expand...
Click to collapse
Because it's a scummy thing to do and borderline fraud.
Sent from my SPH-D700 using Tapatalk
My recommendation keep a charger close by and start checking the couch cushions every where you go.
Yeah I know anyways try odin3 I've seen a guy with the same problem and he's used that to turn it on.
Sent from my OG Epic
algorhythm said:
Because it's a scummy thing to do and borderline fraud.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Not borderline. It "is" fraud.
Sent from my SPH-D700 using Tapatalk
Zeinzu said:
Not borderline. It "is" fraud.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
You and I know this.. But to many others, Sprint owes its customers the sun, moon and stars.
Sent from my SPH-D700 using Tapatalk
Bricked or not bricked, they will refer you to asurion regardless if there is signs of liquid corrosion.
Sent from my SPH-D700 using XDA App
I'll get Odin3 and see if that will work. Now if it does, is it impossible to upgrade and install a custom kernel and/or rom now? I'm still on Froyo running genocide kernel and SFR 1.2 rom.
Obviously I can't do anything using the power button.
I had to give in and just pay the deductable. Not having a working power button is just too much of a hassle especially when dealing with rooting and flashing kernals/roms/etc. Thanks for all the help everyone, I appreciate it.
You can manually control/power on ur phone using the ADB method. You'll just have to download and set up the Android SDK
Sent from my SPH-D700 using xda premium
Phone vibrates 5 times and has a green LED light that stays on. I was running Dark Unicorn v2 before this. It was on Safe Mode. I rebooted into recovery, and now the phone vibrates 5 times and a green light appears. VOL DOWN + POWER does not do anything besides that green-light five-vibration thingy.
Any ideas?
From what I read before, it's not dead. It put itself on some kind of mode. I don't remember where I read about this but let me do a quick search. In the mean time, have you tried adb?
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
siloner said:
From what I read before, it's not dead. It put itself on some kind of mode. I don't remember where I read about this but let me do a quick search. In the mean time, have you tried adb?
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Click to expand...
Click to collapse
I've been reading a lot about it. There was something called safe mode. From what I've read, it seems to be a problem with my volume button (perhaps the phone believe the volume up button is being pressed).
I cannot use ADB as the computer does not detect the phone/SD.
Does your volume up button feel like it's going out? Also try a battery pull then Vol down + power
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
siloner said:
Does your volume up button feel like it's going out? Also try a battery pull then Vol down + power
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Click to expand...
Click to collapse
I'm not exactly sure what you mean by "going out", but from the outside there doesn't seem to be anything physically wrong with it. I also never had any problems with it while I was using the phone normally.
The battery pull and VOL DOWN + POWER gives me five vibrations, and then a permanent green LED. I can't get the phone exchanged because I'm in India, and my warranty has already expired.
Well sorry but I'm out of ideas man. I'll keep searching for an answer and if I find something I'll let you know. Hopefully someone else sees this and has a solution
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Your emmc chip has died this happened to me a while back that's all it has nothing to do with the buttons. I had mine for only a month and it happened to me so you will need another phone its nothing you can do with that device now
Sent from my SGH-T959V using xda app-developers app
tvotony said:
Your emmc chip has died this happened to me a while back that's all it has nothing to do with the buttons. I had mine for only a month and it happened to me so you will need another phone its nothing you can do with that device now
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Thank you for the information. Guess there's really nothing I can do to save my phone then...
Well, at least I will be out of the T-Mobile contract in February. Then I can get a new phone, and use a temporary crappy one until then.
DKMikey said:
Thank you for the information. Guess there's really nothing I can do to save my phone then...
Well, at least I will be out of the T-Mobile contract in February. Then I can get a new phone, and use a temporary crappy one until then.
Click to expand...
Click to collapse
If you have insurance they will replace it I used to have this phone back when I was a tester for team royal back in the glory day of this device
Sent from my SGH-T959V using xda app-developers app
This happened to me and I kept trying to boot into clockworkmod recovery. No matter what I did, it wanted to either do as you stated above or it would immediately try to load off the sd card my pd15img. I simply turned off the phone, pulled the sd card out, and when the phone went to the hboot screen with a volume up and power, or volume down, I then put the sd card back in and selected recovery. I don't know if this is what's wrong with yours, but I definitely had that 5 vibration flashing light issue.
V/R
Tony
Sent from my MyTouch 4G using xda premium
tony6083 said:
This happened to me and I kept trying to boot into clockworkmod recovery. No matter what I did, it wanted to either do as you stated above or it would immediately try to load off the sd card my pd15img. I simply turned off the phone, pulled the sd card out, and when the phone went to the hboot screen with a volume up and power, or volume down, I then put the sd card back in and selected recovery. I don't know if this is what's wrong with yours, but I definitely had that 5 vibration flashing light issue.
V/R
Tony
Sent from my MyTouch 4G using xda premium
Click to expand...
Click to collapse
If you can get to the hboot screen you should load the pd15img. It would hopefully start you over un rooted
Sent from my SGH-T959V using xda app-developers app
What does the phone do when its plugged in? I only ask because mine was doing this same thing and it turns out it was a problem with my battery. I got a new one from Ebay for about 5 bucks but I also convinced T-Mobile that it was my phone and got it replaced. I had Insurance on it of course.
DKMikey said:
Phone vibrates 5 times and has a green LED light that stays on. I was running Dark Unicorn v2 before this. It was on Safe Mode. I rebooted into recovery, and now the phone vibrates 5 times and a green light appears. VOL DOWN + POWER does not do anything besides that green-light five-vibration thingy.
Any ideas?
Click to expand...
Click to collapse
I had that happen once also, I did the following and it booted up.
1) take battery out for at least 15min, (I don't know why, but it worked)
2) then do the volume-down+ power it should come right back up.
3) If I remember right, the battery that was in the unit giving me problems, was less than 20%, that very well could have been the real issue. Find a way to charge the battery then pull it.
TheAxman said:
I had that happen once also, I did the following and it booted up.
1) take battery out for at least 15min, (I don't know why, but it worked)
2) then do the volume-down+ power it should come right back up.
3) If I remember right, the battery that was in the unit giving me problems, was less than 20%, that very well could have been the real issue. Find a way to charge the battery then pull it.
Click to expand...
Click to collapse
1 + 2 tried, but didn't work.
Maybe I will try it with a new battery. Thanks for the information guys!
Edit: I do not have insurance (1 year is done)
The PD15IMG I had on my card was the original stock Ginger bread I think and I would had to have re-rooted.
Sent from my MyTouch 4G using xda premium
fried eMMC on MyTouch 4G
I'm also having this issue, got confirmed that my MT4G is dead, but I got it revived using this method here, it is not intended for MT4G, but i got it working...I temporarily using it, while waiting for fix (if there is any) and finding mainboard for my device.
chleoj said:
I'm also having this issue, got confirmed that my MT4G is dead, but I got it revived using this method here, it is not intended for MT4G, but i got it working...I temporarily using it, while waiting for fix (if there is any) and finding mainboard for my device.
Click to expand...
Click to collapse
Problem is, my phone doesn't even go into recovery...or hboot.
Any solutions yet? I've been reading this and have done everything here.
I've bought myself a new replacement battery off eBay. Charged it over night and still nothing. Powering up the phone, it vibrates. After powering up the phone and left it on for 5 min, I waited to see if it'll recognize my phone through the computer so I can check if it's the phone or the lcd, but still nothing. Any suggestion will be really grateful! And I have no insurance. Bought it used over Craigslist.
Sorry, I'm not trying to jack anyone's thread. Just didn't want to start a new one with almost the same problem.
I think your volume button is stuck was reading somewhere that someone fixed it by taking his volume button apart and it was stuck pressing up I think and that's y it was doing that not sure if this would help u at all but you might wanna try that
Sent from my HTC Glacier using xda premium
http://forum.xda-developers.com/showthread.php?p=29650107
Read that post it shows that the volume up button is stuck. The vibrations happens to me to if I power my phone down and then hold the up button and try and power on so I think that's the cause of all this
Sent from my HTC Glacier using xda premium
Device : Nexus 7
Running : Android 4.1.2 Rooted
Problem : I was trying to unroot it and flash a 4.2.2 ROM to the device and i ended up bricking it somehow. I looked around a lot on here and youtube. I found one solution i had not tried which was to get into recovery mod. But the device was stuck on the boot loaded. So i hard shut it down, and pressed the key combination to load the boot loader. And, the screen wasn't loading. I heard the little chimes my computer makes when ever a USB device is active, so i heard the thing load into the boot loader. But its not showing on the screen!
Please help i really shouldn't have done this. But i am literally about to cry.
I tried using Wugfresh's Nexus toolkit to flash the ROM, and it would stop on sending system.
I dont know if i did something wrong, if the kernel was messed up, if the kit wasnt right, please as the video said there is 4 million members here. someone has to know what to do...
-Sean
That is not the bootloader. You need to have your device disconnected from your pc. Then go to your bootloader.
Sent from my SPH-D710 using xda premium
graydiggy said:
That is not the bootloader. You need to have your device disconnected from your pc. Then go to your bootloader.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Okay. I disconnected it and started the tree button combination.
Annnnd Nothing is happening.
Should i try plugging it into the wall outlet?
Volume up and power. Its not a 3 button combo.
Sent from my SPH-D710 using xda premium
graydiggy said:
Volume up and power. Its not a 3 button combo.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I feel kind of stupid.
Nope. Not working. And its not the battery. its plugged into the wall.
Just a noob guess, Is it possible the device isnt even using the display? Like its so messed up that its per say not even realizing it has a screen?
Try volume down and power. It is possible that the screens flex cable came loose. Pop the back off and check. You should be getting some visual queue. If all else fails hold the power button for awhile. Like around 15 to 20 seconds. I have had to do that a few times. That should fix it.
Sent from my SPH-D710 using xda premium
graydiggy said:
Try volume down and power. It is possible that the screens flex cable came loose. Pop the back off and check. You should be getting some visual queue. If all else fails hold the power button for awhile. Like around 15 to 20 seconds. I have had to do that a few times. That should fix it.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
OKay. Whats the best tool i should use to get it open?
Also thank you so much for your help.
You can use a fingernail really. The best thing is a plastic spuger. A guitar pic works nicely. Just start at the bottom and work your way around.
Sent from my SPH-D710 using xda premium
---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------
Have you dropped the device at all or sat on it? If you are getting no visual queues, either you have a loos flex cable, or the lcd is cracked or just non functional all together. The best way to check that is to shine a flashlight at an angle into your screen. Look for any odd lines that have a slight or significant curve to them.
Sent from my SPH-D710 using xda premium
graydiggy said:
You can use a fingernail really. The best thing is a plastic spuger. A guitar pic works nicely. Just start at the bottom and work your way around.
Sent from my SPH-D710 using xda premium
---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------
Have you dropped the device at all or sat on it? If you are getting no visual queues, either you have a loos flex cable, or the lcd is cracked. The best way to check that is to shine a flashlight at an angle into your screen. Look for any odd lines that have a slight or significant curve to them.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Assuming i found the right cable which was under a copper shielding that was running up from the metal frame under the battery. It was yellow.
It was tucked all the way in.
I didnt see any cracks or lines. I did sit on my pillow was under it.
That could possibly break the device. I just recently broke mine the other day in similar circumstances. The cable is right by the battery on the right. Should be almost centered by the batt.
Sent from my SPH-D710 using xda premium
graydiggy said:
That could possibly break the device. I just recently broke mine the other day in similar circumstances. The cable is right by the battery on the right. Should be almost centered by the batt.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Oh. But it was working the other day. Does it just do that?
and Yes i got the right cable. So what can i do now? It was rooted so i cant send it back, Is there anything i could do?
You technically could send it back... They can't confirm it is rooted unless you unlock the bootloader and the little lock thing shows up on the splash screen. And since your screen doesn't work, they can't see it unless they test the device after replacing the screen assuming they don't replace the whole unit. But I don't know their procedures. Most companies just replace the whole thing. The screen shouldn't just go out. Not saying it doesn't happen, but it shouldn't.
Sent from my SPH-D710 using xda premium
graydiggy said:
You technically could send it back... They can't confirm it is rooted unless you unlock the bootloader and the little lock thing shows up on the splash screen. And since your screen doesn't work, they can't see it unless they test the device after replacing the screen assuming they don't replace the whole unit. But I don't know their procedures. Most companies just replace the whole thing. The screen shouldn't just go out. Not saying it doesn't happen, but it shouldn't.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Alright. Ill call Google in the morning. I actually was following a guide i saw on a google forums thing where it said to flash the ROM if its not updating as it should. Which is what was happening.
Seanwoodfin99 said:
Alright. Ill call Google in the morning. I actually was following a guide i saw on a google forums thing where it said to flash the ROM if its not updating as it should. Which is what was happening.
Click to expand...
Click to collapse
Well good luck. Never thought one could fully brick a Nexus 7. From my understanding, it is damn near impossible. Tell them that you were updating to 4.2.2 and it won't boot up at all now. That should avoid them replacing the screen and checking everything ultimately getting you a whole new device. I know you said it's not the battery, but try charging it overnight and the try to boot it up. I have seen so many people think they bricked, but discovered later on down the line 'up to 6 months later' that their battery was just dead.
Sent from my SPH-D710 using xda premium
graydiggy said:
Well good luck. Never thought one could fully brick a Nexus 7. From my understanding, it is damn near impossible. Tell them that you were updating to 4.2.2 and it won't boot up at all now. That should avoid them replacing the screen and checking everything ultimately getting you a whole new device. I know you said it's not the battery, but try charging it overnight and the try to boot it up. I have seen so many people think they bricked, but discovered later on down the line 'up to 6 months later' that their battery was just dead.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yep its charging now.
Ill call in the AM if its not going. I got a case number and everything and i have Asus's number.
But seriously thanks for all the help youve given me.
so my brother dropped his phone is water, we did the rice trick. about 5 days later we went to see it and it turned on. but it wont get pass the Samsung
Galaxy S4.
so i used odin to try and like restore the original os.
everything worked fine but the same thing happen.
i tried going into recovery mode but it wont load recovery .
now i'm just letting it sit there on the Samsung screen maybe its gonna take a while to start up idk.
So my question is what can i do to fix this. maybe you guys know something that can to make get passed this screen. or at least go into recovery because i think its not loading because i couldn't wipe the data and cache eta..... i think that why it wont boot up.
or maybe the phone is just messed up forever.
bry2872 said:
so my brother dropped his phone is water, we did the rice trick. about 5 days later we went to see it and it turned on. but it wont get pass the Samsung
Galaxy S4.
so i used odin to try and like restore the original os.
everything worked fine but the same thing happen.
i tried going into recovery mode but it wont load recovery .
now i'm just letting it sit there on the Samsung screen maybe its gonna take a while to start up idk.
So my question is what can i do to fix this. maybe you guys know something that can to make get passed this screen. or at least go into recovery because i think its not loading because i couldn't wipe the data and cache eta..... i think that why it wont boot up.
or maybe the phone is just messed up forever.
Click to expand...
Click to collapse
How are you trying to go into recovery?
Sent from my WICKED AT&T S4
rcklss1 said:
How are you trying to go into recovery?
Sent from my WICKED AT&T S4
Click to expand...
Click to collapse
By Taking out the battery putting it back in and then holding the volume up button and the power button. It goes to the samsung galaxy s4 screen to say that the right booting recovery but then it just stays there doesn't do anything.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Your suppose to hold volume up and power button and home button at the same time. When the small blue writing appears in the upper left corner let go of the power button only. Then when it enters recovery let the other two go.
Try that method.
Sent from my SAMSUNG-SGH-I337 using xda premium
Reinaldo33897 said:
Your suppose to hold volume up and power button and home button at the same time. When the small blue writing appears in the upper left corner let go of the power button only. Then when it enters recovery let the other two go.
Try that method.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Funny how people really believe that the home button needs to be pressed.
Well if you know better help the guy out. We are all here to help each other out not quote stupid comments. If I recall on xda rules if you have nothing good to say then keep it to yourself.
Sent from my SAMSUNG-SGH-I337 using xda premium
Reinaldo33897 said:
Well if you know better help the guy out. We are all here to help each other out not quote stupid comments. If I recall on xda rules if you have nothing good to say then keep it to yourself.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Well I tried what you said still didnt work... idk maybe ill just take it apart and see if theres still water inside
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
bry2872 said:
Well I tried what you said still didnt work... idk maybe ill just take it apart and see if theres still water inside
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
If you dont mind waiting instead of taking it apart place phone in rice for about 24 to 48 hours. Rice sucks moisture out of the phone. If thst dont help then you can consider taking apart.
Sent from my SAMSUNG-SGH-I337 using xda premium
Reinaldo33897 said:
If you dont mind waiting instead of taking it apart place phone in rice for about 24 to 48 hours. Rice sucks moisture out of the phone. If thst dont help then you can consider taking apart.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I put in rice already. But I'll put in rice agian when I get home. If it still dosent work then ill just take it apart.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Reinaldo33897 said:
Well if you know better help the guy out. We are all here to help each other out not quote stupid comments. If I recall on xda rules if you have nothing good to say then keep it to yourself.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
You posted incorrect info. Its hold pwrand volume til it turns on, release pwr, keep holding volume until the blue words appear.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta