[SOLVED] Bug in 29007 Build? - not build related! - Windows Mobile

Hi Guys,
I searched alot without any luck, maybe you can help me? I am refreshing my ROM with said Build and everything goes fine. Except when I go to settings and Sound & Notifications. I acnnot seem to apply any changes to the sounds, alys restes it when I click OK. No way to close that window at all. Has anybody else experieanced something like that?
Thanks a lot for help!

You are probably missing phone_redist lang or res packages. Check to make sure you have them.
Also if you have any ringtone mods, then disable them, and cook to see if the bug is still there.

Thanks for the reply, I'm gonna look into that later and will report if that helps.

Stupid me forgot to check some Sys Packages (plz don't laugh )
- OSFiles
- MediaOSFiles
I used to use the modules of those but they weren't present in that build. My bad. Sorry. Thanks anyway!

derliebewolf said:
I used to use the modules of those but they weren't present in that build. My bad. Sorry. Thanks anyway!
Click to expand...
Click to collapse
Just convert the files to modules with reversmod.exe.

Thanks I know I can try that but I had neither the Files, nor the Modules Version cooked in. Which led to the initial problem.
Would it make notable difference if I reverserecmode those both?

derliebewolf said:
Would it make notable difference if I reverserecmode those both?
Click to expand...
Click to collapse
You might get a little faster loading times with the modules. I doubt you'd notice it, but modules are faster than files.

Related

FIxed Defalut Shadow Camera on ND4SPD's ROM

ROM Im referring to is HTC Juno/Phoebus WM6.1 Clean Developer Edition
I was trying to fix this and thought that maybe If I could use the defalut registry keys from an original unlocked shadow could fix it..
I went to Tmobile website and installed the default TMobile Shadow ROM..
I then copied the entire registry structure and all values onto my computer..
I made comparisons between ND4SPD's rom and Tmobile Shadows ROM.. and updated it with most of the default values that came with the Tmobile Shadows ROM.
I was trying to fix the MMS Pic shrinks up receipt problem and have not yet installed the camera cab that was suggested by freddy reyes.
I tried the MMS and still no luck but the camera worked and works great.. it works exactly like if it was running off the default TMobile ROM. All the same options are there so basically all I happen to have done is enabled the camera functions that were already there.
Im not sure which exact folders did this but if you ask I will post any folders and values if anybody else wants to do this.
I made an OEM package called T-Mobile Edition when I made the tmo edition beta rom. Whenever that is added, the portrait camera worked. Until now, I've thought that it was a dll that was missing and kept going through the dlls in that package but could never find the solution. Thanks for the info that it's a registry problem. I can tell you what line fixes this as soon as I get home.
I guess I'll try making a cab for the first time to fix this. Or get shadowmike to do it...
Nice, can you send to pictures to T-Mobile Album?
ND4SPD, If you give me a zip of all the files that need to be updated, and registry string values, I'll gladly make one.
ND4SPD said:
I made an OEM package called T-Mobile Edition when I made the tmo edition beta rom. Whenever that is added, the portrait camera worked. Until now, I've thought that it was a dll that was missing and kept going through the dlls in that package but could never find the solution. Thanks for the info that it's a registry problem. I can tell you what line fixes this as soon as I get home.
I guess I'll try making a cab for the first time to fix this. Or get shadowmike to do it...
Click to expand...
Click to collapse
I'm glad I could be of some use on this issue.. I have tried to make cabs out of the registry entries but not sure how.. i have two programs but when I do it they add an additional folder in the registry folders and mess everything all up..
To further more your comment yes..it was definately a registry issue....
Would you mind posting the cab on this same thread?
Thanks for the offer lbakalinsky. As soon as I find out, I'll post the files. Unfortunately, now that I'm looking at the files, it doesn't seem to be in the T-Mobile Edition package. Here's the only reg entries I have in that package:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\INCOMING\portrait\text]
"minorcolor"=dword:FFFFFF
"majorcolor"=dword:FFFFFF
"textcolor"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\portrait\other]
"bmpNormal"="\\Windows\\_BackgroundImage_Port.bmp"
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\portrait\text]
"textcolor"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\Landscape\other]
"bmpNormal"="\\Windows\\_BackgroundImage_Land.bmp"
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\Landscape\text]
"textcolor"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\AboutURLs]
"version_0409"="file://\\windows\\default_0409.htm"
"home_0409"="file://\\windows\\default_0409.htm"
"blank"="res://webview.dll/blank.htm"
I'll start looking through other packages now.
ND4SPD said:
Thanks for the offer lbakalinsky. As soon as I find out, I'll post the files. Unfortunately, now that I'm looking at the files, it doesn't seem to be in the T-Mobile Edition package. Here's the only reg entries I have in that package:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\INCOMING\portrait\text]
"minorcolor"=dword:FFFFFF
"majorcolor"=dword:FFFFFF
"textcolor"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\portrait\other]
"bmpNormal"="\\Windows\\_BackgroundImage_Port.bmp"
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\portrait\text]
"textcolor"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\Landscape\other]
"bmpNormal"="\\Windows\\_BackgroundImage_Land.bmp"
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\PROGRESS\Landscape\text]
"textcolor"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\AboutURLs]
"version_0409"="file://\\windows\\default_0409.htm"
"home_0409"="file://\\windows\\default_0409.htm"
"blank"="res://webview.dll/blank.htm"
I'll start looking through other packages now.
Click to expand...
Click to collapse
The only reg entries.. do you need more from the original Tmobile ROM? If so let me know what entries and I can copy and paste..
The entries I made sure that got updated where pertaining to the camera and arcsoft (in hopes of enable to receive MMS, I can send out just fine) and the camera worked just fine..
sure, that would be great! Thanks for the work you guys are putting into this.
Registry Cab for Camera fix!
ND4SPD said:
sure, that would be great! Thanks for the work you guys are putting into this.
Click to expand...
Click to collapse
Let it be known that this is my first cab and true contribution to XDA
About the Cab:
With the Dev ROM installed, this cab will add and update the proper registry entries to the Juno to enable the default Tmobile Shadow Camera with all the functions.
Keep in mind that the camera is set as a Portrait and no the popular Landscape format.
Sweet, now all we need to do is change the background color of the menu's and it's all good. Well I"ll look around for a solution, in the next few hours. Great work.
EDIT:
Okay, to edit the theme of menu, we need to go to this section of registry: HKLM\Software\HTC\Camera\OSDMenu\
So which colors would be best to theme the Camera menu?
A little clarification here.. Is this only for the Developer ROM? I have the 4.1 beta ROM, and I tried this package and my camera is still good ol' landscape. Ugh. I hate it. This is the last annoying thing I wish I could fix.
@ND4SPD: do you know if this will fix the beta ROM camera?
Thanks guys.
Bipinsen, did you install Freddie's landscape camera fix on the Beta 4.1 rom?
I used the developer rom, and I found out that I first had to removed the landscape fix before I could use the portrait fix.
If you can not remove the landscape fix. You might have to dlete the HTC camera setting on your phone.
lbakalinsky said:
Bipinsen, did you install Freddie's landscape camera fix on the Beta 4.1 rom?
I used the developer rom, and I found out that I first had to removed the landscape fix before I could use the portrait fix.
If you can not remove the landscape fix. You might have to dlete the HTC camera setting on your phone.
Click to expand...
Click to collapse
I think I did have Freddie's fix, but I had removed it (and I can no longer find it in my installed programs). I took your suggestion and deleted the entire folder in HKLM\Software\HTC\Camera, rebooted and installed this cab. No luck. Something else must be screwed up. Thanks for the hints!
bipinsen said:
I think I did have Freddie's fix, but I had removed it (and I can no longer find it in my installed programs). I took your suggestion and deleted the entire folder in HKLM\Software\HTC\Camera, rebooted and installed this cab. No luck. Something else must be screwed up. Thanks for the hints!
Click to expand...
Click to collapse
Who's ROM are you using? please post link to ROM or forum. It would be helpful to know that first... (some roms mite alreay have the camera set a specific way)
Then if you haven't done so already go into your settings and go under more until you find Uninstall programs and make sure you have uninstalled any camera cabs...
Then install the cab that is on this post.
Turn off and restart your computer to make sure it took the cab well.
This is the ROM I'm using. Let me explain what my gripe is.. You can take pictures in portrait or landscape format just fine. It's when you hit the menu or settings button, you have to rotate the phone in landscape form to read the screen. I don't like that. Soo.. I'm not even sure if the cab here will fix that.
Ok.. one other thing that I never really found out. Video recording in my ROM is only a fraction of the whole screen. Did anyone find a fix for that?

[REQ] Kitchen help

Ladies and gents, would one of you mind sharing a working erv file from your kitchen? I've attempted to build my first Leo ROM and it won't get past the customization. I would like a reference to compare my build to. I don't need a full kitchen, unless you want to share, just the erv to build it.
Thanks guys
silentP
there's already a kitchen thread for this. do a search!
zenkinz said:
there's already a kitchen thread for this. do a search!
Click to expand...
Click to collapse
-nevermind, it's pointless
the erv may vary due to differ packages u may have. so it also pointless.
what problem u hv?
monx® said:
the erv may vary due to differ packages u may have. so it also pointless.
what problem u hv?
Click to expand...
Click to collapse
monx, thanks. The ROM boots and shows the splash screen. It goes to the RunCC and stops. It never finishes or reboots. If I soft-reset, it begins the customization process and hangs. I just wanted to compare what someone else had. I don't want the whole kitchen. I'm using the kitchen here: http://forum.xda-developers.com/showthread.php?t=624672
u need to recmod NTConfig.dll from Notification enhancement. use the NTConfig.dll file. delete the modules.
monx® said:
u need to recmod NTConfig.dll from Notification enhancement. use the NTConfig.dll file. delete the modules.
Click to expand...
Click to collapse
Thank you for taking the time to help. I'll try it.
Respectfully

[SOLVED]non booting rom?.....now make a bootable rom

hi all..
we all have suffered from one common things while making a rom..
after all your hard work and spending so much time and reading on and on for improvements u encounter this
stuck at smart mobility
so i request all people who faced such problems and have solved them,,plz write here about it..
what u have done..??
what is the cause??
this will easier for lots of people to understand why they have non booting rom..
so afterall i got this solution..
1.Make sure the following packages are cooked:
. NetCF or NetCF 3.5
. Dummy FWUPDATE
. Dummy SQM
. WinCENLS_WWE
byDOTCOMPT
2.if your rom gets stuck on radio screen and the screen doesnt dim after a lil bit then you have problem with xip...if the screen does dim it usually means a problem with system.
byTWOPUMPCHUMP
3.recmod ALL modules in your EXT folder
recmod these three folder in sys...browsing, browsingcore, and browsingie
BYTWOPUMPCHUMP
4.ALSO SEE THE ATCHED TXT FILES BY KOKOTAS FOR WHICH FILE TO RECMOD ON PAGE 3
This could be caused by many things.
I suggest you check all last changes you did, which packages/edits etc...
Before I edit my kitchen I always make sure I have a backup incase stuff like this happens so I can refert back.
I recommend editing step by step and not edit to many things at once.
Grtz Leo
Totally agree with Laurentius.
Just some points to look:
1.wince.nls
2.XIP
3.boot.rgu
4.UPXed files
Best Regards!
ps:A Hard Reset would be nice after flashing
kokotas said:
Totally agree with Laurentius.
Just some points to look:
1.wince.nls
2.XIP
3.boot.rgu
4.UPXed files
Best Regards!
ps:A Hard Reset would be nice after flashing
Click to expand...
Click to collapse
almost done..
ok i made a rom 23544..works like a charmm..
but i just upgrade new build like 23548,49,52
all have non booting issue..
no changes have been made from 23544 build not even new application added..
but no luckk.
checked wince..found xip is ok..
also done recmod but no luck..
so now???
i tell u what i just change build 23544,,i got bootable rom..then just chang build ..48..49
non bootable rom
Try XIP 23544, SYS 23548,49,52.
Maybe a bad XIP source?!
If you change to a new MS build you only need MSXipkernel plus SYS.
No recmod is needed, I never use recmod.
Try playing with wincenls, move it from SYS to XIP or maybe viceversa.
Laurentius26 said:
If you change to a new MS build you only need MSXipkernel plus SYS.
No recmod is needed, I never use recmod.
Try playing with wincenls, move it from SYS to XIP or maybe viceversa.
Click to expand...
Click to collapse
but without recmod the kitchen even not building a rom
That's weird, the kitchen should run without recmodding modules.
Maybe you have a conflict in your kitchen where a file is overwriting a module?
saurabh88 said:
but without recmod the kitchen even not building a rom
Click to expand...
Click to collapse
so your rom gets stuck at first screen, with radio info ect on bottom of screen? what modules are you recmodding? do you have hidden and system files visable on your pc? what kitchen are you using? there are alot of things that could cause your rom not to boot, the more info you give the easier it is to help
twopumpchump said:
so your rom gets stuck at first screen, with radio info ect on bottom of screen? what modules are you recmodding? do you have hidden and system files visable on your pc? what kitchen are you using? there are alot of things that could cause your rom not to boot, the more info you give the easier it is to help
Click to expand...
Click to collapse
i use evk..
other things i have already stated before that with same kitchen i can make rom of 23544;but what the fkkkk..i just change build to23548;4951 non bootibg rom...
strange but true.
i just use extra button in evk to recmod as someone already made a post to use extra button via batch file..
saurabh88 said:
i use evk..
other things i have already stated before that with same kitchen i can make rom of 23544;but what the fkkkk..i just change build to23548;4951 non bootibg rom...
strange but true.
i just use extra button in evk to recmod as someone already made a post to use extra button via batch file..
Click to expand...
Click to collapse
Make sure the following packages are cooked:
. NetCF or NetCF 3.5
. Dummy FWUPDATE
. Dummy SQM
. WinCENLS_WWE
Could you post your Build_log.txt here.
-
saurabh88 said:
i use evk..
other things i have already stated before that with same kitchen i can make rom of 23544;but what the fkkkk..i just change build to23548;4951 non bootibg rom...
strange but true.
i just use extra button in evk to recmod as someone already made a post to use extra button via batch file..
Click to expand...
Click to collapse
then obviously something different has been done with the newer builds you are trying to use that wasnt done with 23544. did you recmod 23544 the exact same way as you did the newer ones that didnt work? if your rom gets stuck on radio screen and the screen doesnt dim after a lil bit then you have problem with xip...if the screen does dim it usually means a problem with system. you can use beyond compare to compare the working build to the non-working one, if there is something different you will be able to tell.
twopumpchump said:
then obviously something different has been done with the newer builds you are trying to use that wasnt done with 23544. did you recmod 23544 the exact same way as you did the newer ones that didnt work? if your rom gets stuck on radio screen and the screen doesnt dim after a lil bit then you have problem with xip...if the screen does dim it usually means a problem with system. you can use beyond compare to compare the working build to the non-working one, if there is something different you will be able to tell.
Click to expand...
Click to collapse
yes screen does not dim..
so what is your suggestion??
Then XIP(MSXIPKernel) is probably the cause.
Did you try a different XIP or a combination of XIP(MSXIPKernel) 23544 and SYS 23548 as I told you before?
From where did you get the 23548-49-52 builds?
Maybe you should download them again?
Best Regards!
saurabh88 said:
yes screen does not dim..
so what is your suggestion??
Click to expand...
Click to collapse
thats why i asked if you have hidden and system files showing on your pc...maybe you left some files/dsm/rgu out of msxipkernel.
kokotas said:
Then XIP(MSXIPKernel) is probably the cause.
Did you try a different XIP or a combination of XIP(MSXIPKernel) 23544 and SYS 23548 as I told you before?
From where did you get the 23548-49-52 builds?
Maybe you should download them again?
Best Regards!
Click to expand...
Click to collapse
yes did it but no luck.....
i download them from da_g thread..
if u can plz give me the link of them to dwnld again
twopumpchump said:
thats why i asked if you have hidden and system files showing on your pc...maybe you left some files/dsm/rgu out of msxipkernel.
Click to expand...
Click to collapse
ok i will compare them and see.l
saurabh88 said:
yes did it but no luck.....
i download them from da_g thread..
if u can plz give me the link of them to dwnld again
Click to expand...
Click to collapse
Have you tried the 23554 that I posted (It is in my Rollups folder, link can be found in NRGZ sticky in this forum)
build log of 23554
still stuck at smart mobility,,,here i attached file plz someone look at it and help me...
i have just sorted them through dump sorter..
Saurabh: see also this post by twopumpchump: http://forum.xda-developers.com/showpost.php?p=6032341&postcount=14

How to use threaded email in another builds

does some one know wich packages give threaded mail:-o
i know its 235 serie that have threaded mail
i looked at the explenationthread of sys packages made by da_g
but none off the package have info about threaded mail
Mod edit: Post moved
MOD Edit:"This post has been moved to a new thread"
You can try this
http://forum.xda-developers.com/showthread.php?t=657372
if it works... share with us your experince
You can take a look at this package. I cook for WQVGA using Vistang's Visual Kitchen, so you may need to replace the pngs with those from a COM5 build. (But if you use HTC's email wizard you won't get to see these icons )
The structure of the EXT package may need modification too based on your kitchen.
i cant download the pkg... it hangs loading the link.....
ock said:
You can take a look at this package. I cook for WQVGA using Vistang's Visual Kitchen, so you may need to replace the pngs with those from a COM5 build. (But if you use HTC's email wizard you won't get to see these icons )
The structure of the EXT package may need modification too based on your kitchen.
Click to expand...
Click to collapse
thank you gonna give it a go and see what happens:-o
+ Que PPC said:
i cant download the pkg... it hangs loading the link.....
Click to expand...
Click to collapse
i attach it for you here
edit: hmmm when flashed i get the message 'pkg' isnt a valid ppc application
and then nothing starts:S
i cant even egt the dialer
verry lame:-o
forgot the pics but i think that aint the problem:-o
and i recmodded the dll files and the .exe
i use ervius kitchen and there those are recmodded to so that aint the problem either:-o
edit2: still not managed to get it
i do got manilla starting again
but now tmail isnt a valid ppc application:s
time will get me there
just wish i still had my dualcore to make the roms
edit3: message is gone now my mails or the inbox wont open:s
but im getting close to get it working i think
miniterror said:
edit2: still not managed to get it
i do got manilla starting again
but now tmail isnt a valid ppc application:s
time will get me there
just wish i still had my dualcore to make the roms
edit3: message is gone now my mails or the inbox wont open:s
but im getting close to get it working i think
Click to expand...
Click to collapse
Forgot to mention, it won't work on COM2 builds (if I've not mistaken)
ock said:
Forgot to mention, it won't work on COM2 builds (if I've not mistaken)
Click to expand...
Click to collapse
lol
thats what i am trying to do
get it working on 21901:-o
mikenificent said he has it working in 21901
edit: hmmm think i have to wait till mike wants to tell me how he has done it
replaced all the files you mentioned
tried it as ext at the end, at ext in the beginning, as sys package
and replacing them in sys seperatly and none of the options work for me
edit: gonna give it one more spin as i thought of something wich might fix it
Damn... hope he can shares the info....
+ Que PPC said:
Damn... hope he can shares the info....
Click to expand...
Click to collapse
yep already talked with him as we are the only two dutch blackstone chefs
he will tell me but first he wants bring out his rom with the feature and then he will help me getting it
in the meantime i keep on trying things
the file that whas attached above contained a mui(language file)
why only the language file and not the normall dll that comes with it(flashing now to see if it works)
im keeping track of all the files i am replacing adn if i manage to find out wich files to include i will tell here
but first i have to find it
cool... yeah lets wait for is release he is on his rights to do that
Many apps uses Muis to set some trasnlations another uses the same structure of the dll for dialog boxes... thats why some apps has and some hasnt
+ Que PPC said:
cool... yeah lets wait for is release he is on his rights to do that
Many apps uses Muis to set some trasnlations another uses the same structure of the dll for dialog boxes... thats why some apps has and some hasnt
Click to expand...
Click to collapse
ok i have tried everything i could think off
im gonna quit trying to search the solution
i will just wait for him to tell it
i bet it is something obvious i am missing atm
I found this post while searching for the same thing. I have not tried it yet so I'm not for sure.
nsauceda35 said:
I found this post while searching for the same thing. I have not tried it yet so I'm not for sure.
Click to expand...
Click to collapse
on 21 build it doesnt work yet
im awaiting till mike tells mehow to make it working
^ I say Mike is full it. No offense to him.
vetvito said:
^ I say Mike is full it. No offense to him.
Click to expand...
Click to collapse
i think mike has all the right to wait with telling it
he has found something that should be impossible
he is finalizing his update and for finding out how it works he has the right to show people he found it
besides he isnt obligated to tell how it is done
he could also choose to keep the secret for himself
i have tried it today without succes and i have tried some combos with the files posted on previous page and moving arround register and comparing them
i would also wait with telling till i finished my rom and gave it to the users
still no news ?
PM the OP maybe he already ha sthe solution but dont want to share it
Anything ever come of this? I've been looking for a way to get the threaded email from COM5 on to a COM2 ROM (Specifically TMOUS stock 2.10) since I got my Leo. The Start menu's fine at the bottom with smaller phones, but I much prefer it at the top on the Leo - and I'm greedy enough to want the advantages of COM5 as well. Having come from an i900 Omnia with the latest COM5 builds, I miss threaded email.
Have been hunting high and low for the necessary files for some time, though I assumed simply overwriting tmail.exe & tmailutl.dll wouldn't do the trick - and everything I've read leads me to believe this is unfortunately the case. Surprises me there hasn't been more work done towards getting this functional..
If anyone IS working on this, I'm more than happy to test/help out if need be.
I haven't tried it myself, but I've seen this post:
http://forum.xda-developers.com/showpost.php?p=5607877&postcount=11934
ther-amm said:
Try this one.
Base_DPI_xxx
email_wizard_exchange.png
email_wizard_winlive.png
Base_Lang_xxxx
outres.dll.xxxx.mui
BaseApps
cemapi.dll
tmail.exe
f50e9a40-aed9-497a-bdea-84451210e960.rgu (Add the following entries to this file.)
Redist
tmailutl.dll
Code:
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\Exchange]
"Rank"=dword:4000
"Name"="Microsoft Exchange"
"Exchange"=dword:1
"Icon"="\\Windows\\email_wizard_exchange.png"
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\WindowsLive]
"Rank"=dword:3000
"Name"="Windows Live Mail"
"Icon"="\\Windows\\email_wizard_winlive.png"
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\Gmail]
"Rank"=dword:2000
"Name"="Gmail"
[HKEY_LOCAL_MACHINE\System\Inbox\SetupNewAccountProviders\Yahoo]
"Rank"=dword:1000
"Name"="Yahoo!"
that's works for me with 28223 and 23102. Let me know if that's works for you too.
Below are links to 23102 emulator image for QVGA and WQVGA with threaded mail and Office Mobile 2010 14.0.23529
http://rapidshare.com/files/349684012/23102_PPC_USA_GSM_QVGA_VR.7z
http://rapidshare.com/files/349715469/23102_PPC_USA_GSM_WQVGA_VR.7z
Good luck.
Click to expand...
Click to collapse
Cheers for the reply - saw that thread, but it was for builds 28xxx & 23xxx - I'm looking to get it working on 21xxx builds.

[Q] how to cook sense?

I apologize if this has been covered, but I can't find specific info with my search terms.
I'm cooking for Rhodium, WVGA, WM 6.5.x sys 21682. My base ROM is ATT's stock august 30th 2010 ROM. Using OSKitchen Zero, latest release.
Basically, I can't get any version of sense to work. I've tried cooking 2016, 2018, and 2019, and can't get any of them to work. The problem is that when I try to import the EXT packages with OSKZ, I get an error stating: "The OEM package you've selected doesn't seem to be valid..."
So, I thought maybe it was just being strange. So I placed the packages manually into the kitchen and tried to build the ROM and platform builder would hang and I'd have to cancel the process.
Any tips tricks or ideas?
Thanks a lot!
Smith
Where are you sourcing your sense files from?
Have you got the additional dependencies covered (ie starticonloader?)
crazyC said:
Where are you sourcing your sense files from?
Have you got the additional dependencies covered (ie starticonloader?)
Click to expand...
Click to collapse
I'm not sure what you mean by sourcing exactly, but on my PC they're located on my desktop, and I've also tried placing them straight into my kitchen without using the GUI to do it.
I got the files from a post here on XDA.
Yeah, I believe I have all the additional dependencies as well.
I've been reading and it looks like I have to modify the app.dat file and some other files?
Regards
Smith
smithisize said:
I'm not sure what you mean by sourcing exactly, but on my PC they're located on my desktop, and I've also tried placing them straight into my kitchen without using the GUI to do it.
I got the files from a post here on XDA.
Yeah, I believe I have all the additional dependencies as well.
I've been reading and it looks like I have to modify the app.dat file and some other files?
Regards
Smith
Click to expand...
Click to collapse
OK so you got them from XDA - as I am assuming you are not using the At&T standard ones. (that was what I meant).
The ones I got from XDA were already CFC'd and were already in EXT format not OEM and so did not need any importing as such, just copying into the directory.
I did not need to modify anything - cannot remember the thread I got them from tho.
I will try and have a look, but my kitchen is now such an amalgamation of packages that I couldn't be sure where it all came from.
Ahhhh ok, i was confused because it says's import, ext package then it asks for an oem location.
Ok, with that cleared up, place straight into kitchen, gotcha. How many dependencies are there, can you recall? I think i have them all but I want to make sure.
Thanks a lot!
Regards
Smith
Edit:
No go, but here's the error (attached in the pic)
You've got files inside of modules. You need to clean your modules up.
Farmer Ted said:
You've got files inside of modules. You need to clean your modules up.
Click to expand...
Click to collapse
Alright, is there any reading I could do to help me figure out what to clean and what to keep?
Thanks
Smith
Try looking inside the corrupt modules, then look in some clean ones, and figure out what doesn't belong. It should be obvious.
Someone else is just going to tell you the answer, but you're better off figuring it out yourself.
Farmer Ted said:
Someone else is just going to tell you the answer, but you're better off figuring it out yourself.
Click to expand...
Click to collapse
Couldn't agree more. I'll check it out.
Thanks for the info, much appreciated!
Regards
Smith
Edit: one last question. It's killing me finding all the WVGA dependencies for this package, they're all vga is appears. This is what I'm using: http://forum.xda-developers.com/showthread.php?t=797602
and when it lists the "required packages" when I download it it's labled VGA, not WVGA, and I think that'll be a problem. Will it?
Right, cooking sense is not my strongest point so I will probably leave it to others to take it further, but
Modules vs files - you need one or the other I think. Look up recmod and reversemod.
I just used a set of Manila files uploaded and CFC'd by someone from the latest official LEO ROM.(By Patensas I think) and maybe updated the HTC framework as well.
crazyC said:
Right, cooking sense is not my strongest point so I will probably leave it to others to take it further, but
Modules vs files - you need one or the other I think. Look up recmod and reversemod.
I just used a set of Manila files uploaded and CFC'd by someone from the latest official LEO ROM.(By Patensas I think) and maybe updated the HTC framework as well.
Click to expand...
Click to collapse
Alright, so I've figured out which packages I need to recmod and have done so. I haven't found those leo files yet, but I'm looking. Just got home. I'll post back when I see how that goes!
Regards
Smith
I have never had to recmod any of the sense files.
What you need to do is delete the files (ie the .dll) within the module. The kitchen will use the module to create the file on the device, it does not need the file as well. Hence the kitchen is giving the warning.
I think.
Hi, just re read your first post.
Could you confirm you have done the following:
Dumped the ATT base rom and rebuilt using just that with the EXTs that came from it, flashed it, and checked it worked? (So you should have had a working Sense in that) as per the Oskitchen instruction set?
If there have been problems with that, try ticking the box next to recmod on the Phone Canvas Enhancement package. I think there was an issue with the ATT ROM around this.
crazyC said:
Hi, just re read your first post.
Could you confirm you have done the following:
Dumped the ATT base rom and rebuilt using just that with the EXTs that came from it, flashed it, and checked it worked? (So you should have had a working Sense in that) as per the Oskitchen instruction set?
If there have been problems with that, try ticking the box next to recmod on the Phone Canvas Enhancement package. I think there was an issue with the ATT ROM around this.
Click to expand...
Click to collapse
Yeah, I did that. Here's the weird part though. That worked the first time. But after having all these difficulties, seeing as I haven't made much real progress, I rebuilt my kitchen. Then it wouldn't work. I would get the exact same runtime error, eventhough it worked before and I've installed all the libraries.
So, as of now the problem lies somewhere with my kitchen. I'm trying to troubleshoot it right now.
Any ideas as to why that might be? I've tried the FAQ's in the OSK thread and haven't fixed the problem :/
Regards
Smith
No sorry.
I had some kitchen problems when upgrading from oskitchen 1.32 (tried to completely reorganise my EXTs at the same time and it went horribly wrong), so went back to 1.32 to sort it out and will upgrade in due course.
If platform rebuilder crashes during the build then you dont need to waste time flashing.
Disable all EXTs and build and then add them in blocks till you identify what is causing the crash.
If it crashes with no EXTs then try the original sys, and if no joy reimport the rom?
Are all the recommended packages ticked for Recmod?
smithisize said:
Alright, so I've figured out which packages I need to recmod and have done so. I haven't found those leo files yet, but I'm looking. Just got home. I'll post back when I see how that goes!
Click to expand...
Click to collapse
I can't help you on Sense, as I don't use it, but why would you recmod anything? That's a bad idea. If you have a 6.5 kernel, use it.
crazyC said:
No sorry.
I had some kitchen problems when upgrading from oskitchen 1.32 (tried to completely reorganise my EXTs at the same time and it went horribly wrong), so went back to 1.32 to sort it out and will upgrade in due course.
If platform rebuilder crashes during the build then you dont need to waste time flashing.
Disable all EXTs and build and then add them in blocks till you identify what is causing the crash.
If it crashes with no EXTs then try the original sys, and if no joy reimport the rom?
Are all the recommended packages ticked for Recmod?
Click to expand...
Click to collapse
Actually recmodding ATT Phone Canvas fixed the problem.
I was able to generate the ROM image with sense 2017 cooked in, but sense won't launch now. "Tap to Start Sense" so I'm double checking dependencies, exe and dll files as we speak.
Thanks a lot for all the help!
Regards
Smith
So i got sense 2017 to at least load. now, however, none of the softkeys work, and tapping on a message in the message tab doesn't work.
So far so good. lots of learning to do yet, but I'll get there.
Thanks a lot for al the info!
Regards
Smith
Alright, I can't get sense to work again lol. It just kinda stopped, eventhough I'm using the same packages for manila and its dependencies.
Any ideas?
Regards
Smith
Does anyone know how to cook sense with old kitchen style(build os) for Omnia II?
Thanks in advance

Categories

Resources