[Q] Need Help Please. DL30 leak flashing instruction. - Fascinate General

I would really appreciate some help flashing the dl30 leak. I have never flashed any roms before. I have rom manager and my phone is rooted. Step by step help would be great THANKS!

I just got to recovery but when i tried to flash it said something about not being able to verify package or something

zachsx said:
Hey Everyone, I thought I'd share how I got 2.2 working on DL05 Fascinate.
I had voodoo5 installed, running cwred
1.) You need to download the rom, and the new CWR
2.) Disable Voodoo5 in Red CW and then flash the new CW GREEN, after you do that reboot your phone, let it disable voodoo it will take time (5 min) on my side.
Soon as it boots up to the fascinate, pull the battery, and reboot into the new CW GREEN.
4.) Flash new Rom, and then wipre date and cache! and done! It takes awhile to boot, I thought mine froze on the Verizon screen for like 4 min.
I have flash, and HID!
Please Do not hold me responsiblity if you brick your phone!
This is just personal experience if you have any questions please let me know, I hope i've helped you!
Click to expand...
Click to collapse
this is in the dev section, are u on voodoo, redcw??? Apparently you need to be novoodoo with new cwm
Dj05/ Superclean/ Voodoo5

Yeah i saw that post earlier and had no luck, honestly i dont know jack about any voodoo. Im on DL09 stock. I dont even think im actually booting into recovery. I get to the screen on my phone that allows me to wipe data, wipe cache, update zip via sd card. when i try to install or update the zips it says failed because of verification signature.

You need to find an update.zip file for green cwmod I think theres one in the dev forums under one leaks reboot using 3button apply update.zip that will take you into cw... From there flash rom,kernel using install from zip then look in your downloads or xda folder
Dj05/ Superclean/ Voodoo5

ajd88 said:
Yeah i saw that post earlier and had no luck, honestly i dont know jack about any voodoo. Im on DL09 stock. I dont even think im actually booting into recovery. I get to the screen on my phone that allows me to wipe data, wipe cache, update zip via sd card. when i try to install or update the zips it says failed because of verification signature.
Click to expand...
Click to collapse
Did you installed Clockwork Recovery Mod correctly? You need to flash CWMRecovery_DJ05_DL09.tar with ODIN (via PDA, NOT Phone!!!) before installing it through ROM Manager first. Just installing from ROM Manager is not enough. Look at here for further instructions: http://forum.xda-developers.com/showthread.php?t=913470

Thread deleted, stated above

Got it all figured out now thanks.

I'll add my nooby plea for help to this thread.
I have a stock rom. It USED to show as DI01. I did figure out how to root it, and just now noticed that it is showing as DH12 (baseband version AND build number), no longer DI01.
So, I need to update it first, before I can install DL30, correct?
I have a DL09.tar.tar file.
I have ODIN3.exe.
I have the DL30-leak.zip.
I have no clue what a CWM is or how to use/install it.
Where can I find the steps to get me to DL30?
Thanks.

WhiteRocks said:
this is in the dev section, are u on voodoo, redcw??? Apparently you need to be novoodoo with new cwm
Dj05/ Superclean/ Voodoo5
Click to expand...
Click to collapse
So I flashed DL30 over my Voodoo DL09 and it booted up just fine.
my 2 problems...
1- I cannot download anything from the market (so I cannot download Titanium to install my backups to see if there are any other problems)... the download starts then just stops. No error messages or anything.
2- I cannot get my exchange mail up and running.
Otherwise... everything SEEMS to work. Calls come through, texts, etc.
Again, I flashed DL30 w/RED Clockwork over a DL09 rom with confirmed Voodoo lagfix (Quadrant scores in the 1800's).
Thoughts?
def

dug-e-fresh said:
So I flashed DL30 over my Voodoo DL09 and it booted up just fine.
my 2 problems...
1- I cannot download anything from the market (so I cannot download Titanium to install my backups to see if there are any other problems)... the download starts then just stops. No error messages or anything.
2- I cannot get my exchange mail up and running.
Otherwise... everything SEEMS to work. Calls come through, texts, etc.
Again, I flashed DL30 w/RED Clockwork over a DL09 rom with confirmed Voodoo lagfix (Quadrant scores in the 1800's).
Thoughts?
def
Click to expand...
Click to collapse
Did you wipe Data, Cache and Delvik Cache in CW Recovery? Try that..
Also, you did disable VooDoo first right?

dug-e-fresh said:
So I flashed DL30 over my Voodoo DL09 and it booted up just fine.
my 2 problems...
1- I cannot download anything from the market (so I cannot download Titanium to install my backups to see if there are any other problems)... the download starts then just stops. No error messages or anything.
2- I cannot get my exchange mail up and running.
Otherwise... everything SEEMS to work. Calls come through, texts, etc.
Again, I flashed DL30 w/RED Clockwork over a DL09 rom with confirmed Voodoo lagfix (Quadrant scores in the 1800's).
Thoughts?
def
Click to expand...
Click to collapse
How did you get 1800's for quadrant, im only getting exactly half of that.

Kaze105 said:
How did you get 1800's for quadrant, im only getting exactly half of that.
Click to expand...
Click to collapse
You don't have voodoo enabled. Installing a voodoo kernal does not mean you have a voodoo enabled. I did the same thing and was wondering why I was in the 900's. Go into red and "enable voodoo" then reboot. It will take sometime 5-10 minutes and you will here a female robot voice telling you whats going on
def

neozen21 said:
Did you wipe Data, Cache and Delvik Cache in CW Recovery? Try that..
Also, you did disable VooDoo first right?
Click to expand...
Click to collapse
I did it super lazy just to see what would happen... so I did not wipe anything... and I left voodoo enabled.
def

dug-e-fresh said:
I did it super lazy just to see what would happen... so I did not wipe anything... and I left voodoo enabled.
def
Click to expand...
Click to collapse
You left Voodoo enabled??? You realize that DL30 doesn't have a voodoo kernel?!! You need to go back to the red CWM and disable voodoo.. hopefully, you can still do that.. then if everything is still good, then wipe data, and both caches...

dug-e-fresh said:
You don't have voodoo enabled. Installing a voodoo kernal does not mean you have a voodoo enabled. I did the same thing and was wondering why I was in the 900's. Go into red and "enable voodoo" then reboot. It will take sometime 5-10 minutes and you will here a female robot voice telling you whats going on
def
Click to expand...
Click to collapse
I had some problem with voodoo on Kaos Froyo so I had to use odin to get stock DL09. Since I installed it without voodoo, would it be safe to install any voodoo5 kernal after installing DL30?

Kaze105 said:
I had some problem with voodoo on Kaos Froyo so I had to use odin to get stock DL09. Since I installed it without voodoo, would it be safe to install any voodoo5 kernal after installing DL30?
Click to expand...
Click to collapse
I don't think there are any Voodoo kernels available yet for th DL30..

Kaze105 said:
I had some problem with voodoo on Kaos Froyo so I had to use odin to get stock DL09. Since I installed it without voodoo, would it be safe to install any voodoo5 kernal after installing DL30?
Click to expand...
Click to collapse
use the stock kernel...dont flash any voodoo5 kernels you happen to have you ur sdcard...wait for ext4 to come to the new kernel (who knows when of course)

nitsuj17 said:
use the stock kernel...dont flash any voodoo5 kernels you happen to have you ur sdcard...wait for ext4 to come to the new kernel (who knows when of course)
Click to expand...
Click to collapse
Alright, will wait. Thanks for the reply.

Help with How to install DL30
I keep getting the same error as another user but I have not seen a good answer yet. I tried to follow the guide by Syn Ack but I can not get past step 2. I get the error E: failed to verify whole-file signature...I have clockworkmod, I ran "Flash ClockWork Recovery" and choose the Fascinate. I also tried "Apply sdcard:update.zip" when I got the E:failed error. What am I missing?

Related

DL30 LEAK INSTALL *My Personal Experince*

Hey Everyone, I thought I'd share how I got 2.2 working on DL05 Fascinate.
I had voodoo5 installed, running cwred
1.) You need to download the rom, and the new CWR
2.) Disable Voodoo5 in Red CW and then flash the new CW GREEN, after you do that reboot your phone, let it disable voodoo it will take time (5 min) on my side.
Soon as it boots up to the fascinate, pull the battery, and reboot into the new CW GREEN.
4.) Flash new Rom, and then wipre date and cache! and done! It takes awhile to boot, I thought mine froze on the Verizon screen for like 4 min.
I have flash, and HID!
Please Do not hold me responsiblity if you brick your phone!
This is just personal experience if you have any questions please let me know, I hope i've helped you!
They've added some stuff, which of course we all wanted froyo. But they have a new app called media hub, for movies, tv shoes, and such. Also you can turn on and off auto rotation, and your mobile data from the drop shade! also you can now sync with yahoo, and hotmail. all share and has google search as your auto, no more bing!
Thanks! There was something about CWR not working on this build, is that still the case? And I heard (from a file apparently posted by Adrynalyne) that SMS and MMS don't work, is there anything else that's not working? Really tempted to flash for the HID so I can use my mini bluetooth keyboard. I don't use SMS anyway (only Google Voice).
Edit: Oh, kaos said in that thread that this isn't the ROM that was on IRC. Cool!
Also, the new dropdown thingies sound awesome, I've been wanting those two forever. And wow, no bing, really? That's really tempting then.
Edit 2: Where'd you get the new CWR?
There is a new CW, floating around somewhere SMS and MMS work great, Also found out you can change your font from the settings menu!
I had a buddy give me the link, hold on
New CWM
http://dl.dropbox.com/u/53905/new_cwm.zip
Is that specifically for voodoo or nonvoodoo kernels, and is it flashed with odin or straight through current clockwork?
stanrc said:
Is that specifically for voodoo or nonvoodoo kernels, and is it flashed with odin or straight through current clockwork?
Click to expand...
Click to collapse
Voodoo.. The Rom comes with a new kernal
Sent from my SCH-I500 using XDA App
zachsx said:
Voodoo.. The Rom comes with a new kernal
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
So if your just running a regular rom, flash through GREEN Clock work, wipe date and cache, and your ready to rock n roll sir!
I'm running blackhole 3 with a nonvoodoo kernel. I'm using standard CW recovery, I don't know much about these green/red variants.
stanrc said:
I'm running blackhole 3 with a nonvoodoo kernel. I'm using standard CW recovery, I don't know much about these green/red variants.
Click to expand...
Click to collapse
Download the new Clock Work above just in case, flash it. reboot your phone back into clockwork, install foyo, then do a data and cache, RED was only for voodoo
Ok thanks, I'm not interested in using voodoo
Yeah, so it should be a easy process for you
If you aren't running voodoo, just boot into whichever CWM you are using and flash the rom.
I was running VooDoo, so I did the following:
Boot to Red CWM
Disable lagfix
Install Green CWM through Odin
Boot to Green CWM, wipe, flash DL30_leak.zip
I just flash CWM Green with the new zip file. easier to do it that way.
Ugh my phone is unable to mount as mass storage and its driving me nuts... Just says its a cd drive despite multiple reboots. Anyone know of a fix yet?
Edit: Hmm made it ask every time I connect and that actually worked for mounting so if anyone has this problem, try that.
Turn the USB into DEBUG Mode, should get you rocking
mAlfunkti0n said:
New CWM
http://dl.dropbox.com/u/53905/new_cwm.zip
Click to expand...
Click to collapse
Should I flash this if I am on a non-voodoo kernel? And if so, how do I do it? Just flash via CWM and it updates it?
Im stil running dj05 deodexed rom and koushs cwr. Can i flash the dl30.zip using my current recovery or what is the easiest way to get this running. At work so i can't get to odin if i have an issue. Appreciate any helpful responses!
Sent from my SCH-I500 using XDA App

Come If Your New CWM Recovery Works for DL30

Is there anyone that has fully installed DL30 and their *NEW* ClockworkMod Recovery works? I need to talk to you.
Yup, it worked for me
Worked for me
Sent from my SCH-I500 using XDA App
Syn Ack said:
Is there anyone that has fully installed DL30 and their *NEW* ClockworkMod Recovery works? I need to talk to you.
Click to expand...
Click to collapse
You need to install the "new" CWM.. the old (green) one doesn't work with the new kernel..
im not sure if im missing it but where do i get the new cwr
neozen21 said:
You need to install the "new" CWM.. the old (green) one doesn't work with the new kernel..
Click to expand...
Click to collapse
i believe if you dont flash the recovery either before or at the same time as dl30 you cant go back and flash it either...im not 100% on that though
I figured it out. You have to do DL30 first then New CWMR. Thanks
Oh, that's good to know, thanks Syn
Does anyone have a working link to the OLD Fascinate CWM .tar? The ones in topic here about is aren't working at all, they either give 404 or say that the poster's links are too busy and were disabled.
Help?
Syn Ack said:
I figured it out. You have to do DL30 first then New CWMR. Thanks
Click to expand...
Click to collapse
I flashed the New CWMR then DL30, I can get into CWMR with no problem.
I wish the new version did show a different version number though.
Both show the same, making it a bit confusing..
neozen21 said:
I flashed the New CWMR then DL30, I can get into CWMR with no problem.
I wish the new version did show a different version number though.
Both show the same, making it a bit confusing..
Click to expand...
Click to collapse
Maybe it was a bad install or my phone just doesnt want CWMR first. Either way it works now.
neozen21 said:
I flashed the New CWMR then DL30, I can get into CWMR with no problem.
I wish the new version did show a different version number though.
Both show the same, making it a bit confusing..
Click to expand...
Click to collapse
do you have a link for the latest cwr?
http://forum.xda-developers.com/showthread.php?t=937499
neozen21 said:
You need to install the "new" CWM.. the old (green) one doesn't work with the new kernel..
Click to expand...
Click to collapse
Just to clear up any confusion, the "new" CWM is also green, so don't think that the "red" CWM is the new one. The red one is just for voodoo kernels, and the last time I checked, neither the leaked DL30 stock build nor the Super Clean DL30 build supports voodoo, which means you actually need the CWM posted here: http://kaessa.com/files/froyo/DL30-cwm.zip
All of the above is true.
Be careful using that recovery, since it still uses koush's (BROKEN ASS) recovery.
I will try to put together a usable package tonight that uses the red cwm instead. That was a mear proof of concept test, not really meant for distribution.
oops, I totally left this part out but my cwm works perfect still, I never installed the new cwm package, I will now though.
I installed the new CWM first then the DL30 rom - this sent me to the TwLauncher force close loop of death. Reinstalled ROM 1st then new CWM and I'm now rocking 2.2 ...
"You know what the problem is with you, son, all of your brains are in your head and not in your feet."
hmm...I'm scared to even touch mine. lol. Followed one of adrynalyne earlier guides where you use odin to much cwmrecovery.tar and then flash clockwork mod in Rom Manager (can't seem to find it now). Rom manager says version 2.5.1.0 and I can still get into cwm.
I disabled voodoo, installed the new cwm, wiped cache/system reset, installed the super clean .7 with no problems at all.
I also rebooted after the voodoo disable and after I flashed the new cwm.
I can't wait for voodoo, the lag is driving me insane!
RubikS 1.7 - Voodoo 5 w/ Voodoo Sound!!
I can confirm that flashing the recovery after installing DL30 didn't work through Recovery mode. I attempted it twice to no avail. I'll retest with the new Red CWM when it's released.

[Q] must redo cwm?

my market has quit working completely.. i am told it is because of cwm.. not sure if it is but i would like to reflash it.
i am running dj05 voodoo 5
so where would i go from here to wipe everything and redo CWM and reinstall dj05 voodoo 5 and modem
i kind of remember what i did the first time but i know its different when voodoo is involved, and the CWm i have no clue about becouse i think i have 2??? the original i flashed and the one that voodoo 5 puts over it
1) do i need to do a full disable of voodoo?
2) can i re odin and rom in cwm just like i did the first time?
3) would it replace the red cwm that came with voodoo 5?
4) would i need to do a data wipe?
neh4pres said:
1) do i need to do a full disable of voodoo?
2) can i re odin and rom in cwm just like i did the first time?
3) would it replace the red cwm that came with voodoo 5?
4) would i need to do a data wipe?
Click to expand...
Click to collapse
i want to wipe my phone to get rid of my market issue..
does wiping it remove voodoo?? do i need to flash over voodoo with a stock kernal before wiping? can i just disable voodoo then wipe and reflash my dj05 and voodoo5
im desperate.. will someone please help me!!!
anyone??? please
? ?
Rocking dj05 and jt's voodoo 5
If you need such instant help, I suggest you go to the IRC as there are some folks who are willing to help.
When you say that market quite completey, does that mean you cant open it or download anything.
Yes remove voodoo as there are no compatible ones right now,i would also use titanium to back up apps to reinstall after data wipe, some purple are having trouble with cwm red so install cwm green. This should help.
Sent from my SCH-I500 using XDA App
I can not download.. It sticks at starting download..irc.. I will look into that.. I am desperate.. I want to start fresh, but can't get the stock kernal to totaly disable voodoo. If I could I would wipe everything and start new and see if that works.
Rocking dj05 and jt's voodoo 5
MadWicket said:
Yes remove voodoo as there are no compatible ones right now,i would also use titanium to back up apps to reinstall after data wipe, some purple are having trouble with cwm red so install cwm green. This should help.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I have everything backed up.. I'm ready to wipe.. But I can't find the stock non voodoo dj05 kernel to complete the voodoo removal....
Rocking dj05 and jt's voodoo 5
Make sure you disabled voodoo in CWM. Then you can flash this kernel, it is Geekniks stupid fast non-voodoo kernel.
http://dl.dropbox.com/u/6088006/stupidfast-v1.54.zip
Doubt you need to re-flash CWM for just market issues, I would just wipe and reflash your rom or use this one.
http://forum.xda-developers.com/showthread.php?t=874809
Copperhed said:
Make sure you disabled voodoo in CWM. Then you can flash this kernel, it is Geekniks stupid fast non-voodoo kernel.
http://dl.dropbox.com/u/6088006/stupidfast-v1.54.zip
Doubt you need to re-flash CWM for just market issues, I would just wipe and reflash your rom or use this one.
http://forum.xda-developers.com/showthread.php?t=874809
Click to expand...
Click to collapse
thank you much..
how do i get to the green cwm from the red one.. or should i use the red one to flash this non voodoo kernel?
neh4pres said:
thank you much..
how do i get to the green cwm from the red one.. or should i use the red one to flash this non voodoo kernel?
Click to expand...
Click to collapse
Use the red one.

why does this happen?

After I odined back to stock like 2 times, I flashed bionix. At first I had to push the froyo jl5 kernel with voodoo because rom manager couldn't install cwm. The everytime I reboot my phone, settings reset. Why?
try the KA7 kernel w/Voodoo and see if you get the same result.. any reason you want to use the JL5 kernel that Supercurio stated causes some problems in the OP???
dont' use cwm just flash through recovery wipe completely first manually,
helikido said:
After I odined back to stock like 2 times, I flashed bionix. At first I had to push the froyo jl5 kernel with voodoo because rom manager couldn't install cwm. The everytime I reboot my phone, settings reset. Why?
Click to expand...
Click to collapse
Sounds like you have some gremlins in your phone. I had a market issue that I tried everything on, and I mean everything. So, for kicks I installed the TW version of bionix and it fixed it right back up. Give it a shot. There's usually no clear answer for these things, but I always keep a version of rom manager and titanium backup on my external sd card for quick flashing. Shoot me a PM if your phone still gives you grief.

need help, several subjects lol

ok. first off.
I just switched from dj05 voodoo with a sc rom, to sc2.3 voodoo eb01.
I made a back up in rom manager of dj05, and a tibu back up, but tibu, for some reason, didn't save to my sd. so I tried to go back to the dj05 back up, but it wouldn't boot. just got stuck on the samsung screen.
so I pushed dj05 back, tried to restore the back up, and still got stuck on the samsung screen. any ideas how to get this back?
ok. next. on sc2.3 eb01, I had neongt theme, decided I wanted revolution, so I downloaded revolution. put on sd, flashed, and boot looped. flashed neon gt again, it booted, and now I have both themes. dialer/menus from revolution, drop down from neon, etc. how would I go about getting just revolution?
lol ok next. so I kinda don't like how things are going with my current setup. would you recommend going with aosp v.7? and if so, would I push the eb01 voodoo kernel through odin then flash the rom through cwm?
thanks in advance for any help!
jordan
Sent from my SCH-I500 using XDA App
Won't boot back to dj05 because you probably didn't do an odin complete back to djo5. I'm betting you just tried flashing the rom ontop of your eb01 modem.
Your theme/rom issues are stemming from a lack of wiping data more then likely before flashing over the new rom/themes.
If you're running voodoo, try super clean 2.4 w/ voodoo...really nice and fast.
jenisiz said:
Won't boot back to dj05 because you probably didn't do an odin complete back to djo5. I'm betting you just tried flashing the rom ontop of your eb01 modem.
Your theme/rom issues are stemming from a lack of wiping data more then likely before flashing over the new rom/themes.
If you're running voodoo, try super clean 2.4 w/ voodoo...really nice and fast.
Click to expand...
Click to collapse
I've pushed dj05 back via odin and still wouldn't boot.
what all do i need to wipe for different themes? I've wiped dalvik/data/battery/the other one under data that I don't remember right now.
do you have links for voodoo kernel and sc2.4? and steps? like push voodoo with odin and flash sc2.4 through cwm? and what do I wipe?
another problem I forgot about- i cant use tibu on sc2.3 cuz of a busy box problem, and busy box from market won't work.
Sent from my SCH-I500 using XDA App
jordanzink said:
I've pushed dj05 back via odin and still wouldn't boot.
what all do i need to wipe for different themes? I've wiped dalvik/data/battery/the other one under data that I don't remember right now.
do you have links for voodoo kernel and sc2.4? and steps? like push voodoo with odin and flash sc2.4 through cwm? and what do I wipe?
another problem I forgot about- i cant use tibu on sc2.3 cuz of a busy box problem, and busy box from market won't work.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
To be honest, I've never used a backup software. I manually copy and paste. any apps I download to a file on my computer then transfer them back over.
Follow these steps though.
1. Charge the battery till it reads 100%
2. Place Super Clean voodoo 2.4 on your SD card on your phone and enter download mode.
3. Plug in phone to odin and using PDA flash over eb01 modem
4. Go into CWM wipe data twice/bat statistics and cache...then select locate super clean 2.4 w/ voodoo and install and enjoy.
If you already have the eb01 modem set up, just download the sc 2.4 w/ voodoo and place it on your sd card and reboot into cwm. flash data at least twice and cache on a full charge. Then locate the zip file and extract/load via cwm. Should be good.
ok thanks. once there, should everything be wiped enough to be able to flash revolution theme on?
Sent from my SCH-I500 using XDA App
jordanzink said:
ok thanks. once there, should everything be wiped enough to be able to flash revolution theme on?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
If you're going to flash a theme over sc 2.4, I'd still wipe data twice and cache...that's just me though. It's always best to start fresh you know?
yeah gotcha. can you help me with the busy box issue? or should I just pull all the apps from my phone to my computer?
Sent from my SCH-I500 using XDA App
jordanzink said:
yeah gotcha. can you help me with the busy box issue? or should I just pull all the apps from my phone to my computer?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I've never really pursued anything that way. I run on flashed phones so there's alot more chances for things to get f'd up so I've always done things the extra cautious way unfortunately. That way if I get a corrupted sd card error or anything along the lines, I'm secured. Plus I keep a change log for prl and modem settings.

Categories

Resources