Not sure what RA , but think recovery.?, anyhow I bought an EVO 4G , this would be 1st in Android work., iam trying to zerooo all my meid and esn., the evo has Radio 2.15.00.11.19 and OS 2.2.
been reading and reading each step takes me days., I got the MSL from CDMA., and from what i have been reading with the radio 2.15.00.11.19 wont be able to repair MY MEID to 00000000., need to downgrade to 132.651....., downloaded the file , and made my evo as a drive and installed it to card., when i go to the menue .power and lower volume down and get a few options ., need to get i guess to SD card to read the RUU file ., if i did recovery i go into just a picture of a phone and like a red arrow .or power to the up directions., no options with what i seen in some posts...like to choose SD card and boot the file...etc
ofcourse i didnt do a root , not sure which one to choose., but do i need to do anther hack to get to the ruu file i installed on card.?
sincereluy
okwassup said:
Not sure what RA , but think recovery.?, anyhow I bought an EVO 4G , this would be 1st in Android work., iam trying to zerooo all my meid and esn., the evo has Radio 2.15.00.11.19 and OS 2.2.
been reading and reading each step takes me days., I got the MSL from CDMA., and from what i have been reading with the radio 2.15.00.11.19 wont be able to repair MY MEID to 00000000., need to downgrade to 132.651....., downloaded the file , and made my evo as a drive and installed it to card., when i go to the menue .power and lower volume down and get a few options ., need to get i guess to SD card to read the RUU file ., if i did recovery i go into just a picture of a phone and like a red arrow .or power to the up directions., no options with what i seen in some posts...like to choose SD card and boot the file...etc
ofcourse i didnt do a root , not sure which one to choose., but do i need to do anther hack to get to the ruu file i installed on card.?
sincereluy
Click to expand...
Click to collapse
You are trying to zero your meid? Just use the engineering bootloader or qxdm
First of all, you are getting way ahead of yourself. You can only use recovery if your rooted. Second, you are going to mess up your phone big time by downgrading to such an old radio when you have a new phone with possibly the new camera hardware that will require certain kernels and radio versions. If you want to root, the easiest way is to download unrevoked from unrevoked.com and follow the instructions. Then slow down a little before you end up messing up your phone. After you get it rooted, boot into recovery and do a nand backup so you have a back up file to revert back to when you mess up your phone. Which from the the things you seem to be trying to do is most likely.
I read more and was able to root my evo 4G., so as of know iam rooted , not sure into bricking it ,or doing what i want with ., so this is the update
from what i read i cant zero my meid ...etc with current radio, since i wont be able to locate ,or scan memory locations... . therefore i need to downgrade to lower radio .??,isnt that one way to do it.??
i have CDMA 2.7 and XQDM ., thats it from the web here and there .
so since i did a nand back up . can i downgrade to a older ROm ..Radio ... etc and zeroo the meid locations ..etc then do a restore.?
any ideas about doing that ..etc
all feed back is great .
sincerely
Can I ask what the benefit of zeroing your meid, esn, etc is?
just want to learn how to do things ., its amazing all the file programs these wiz people made., love to play with things ..change things see if i can do it.
Related
Guide To rooting mytouch 3g 32b (Even if you have 1.6 update)
Propz to:Amon_RA, andreev2001, Cyanogen, and any one else sources I used
Ok after Searching the forums and finding all types of ways to root a Mytouch and having some/no luck I decided
to created a thread that goes into complete detail(or try to at least) about each step that is guaranteed to work if done correctly.
READ
This guide does not require a goldcard or adb . I am also not responsible for bricked/broken phones. Now since that's out of the way happy rooting!!
IF your phone is currently running 1.5(cupcake) already then skip to step 3
1.First of all we can't really do anything with 1.6 so we must downgrade to 1.5 by downloading this sappimg.nph and installing it
2.Once downloaded put it on your sdcard and reboot and go into hboot mode (Hold END+VOLUME DOWN). Preform the update
3.Once update is COMPLETLY finished and it asks you to reboot. Do so, then load your phone up fully and download this apk here (flashrecovery.apk) then run it.
Skip these steps and go to step 4 if you know how to install a apk
3a.to install this apk you have to enable the install unkown source in your settings. To do this hit menu >Settings>Applications>Unkown Soruces(check this).
3b. After this go to the market and download a app called "Astro" (the description should mention somthing about file manager) or you could use another apk installer but I prefer this one.
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
5.Once that is done you want to download the SPL by clicking here, then put it on your sdcard. After that download any ROM(If you dont know what a ROM is search, I cant tell you everything ) of your choice and rename it "update.zip" without quotes then place it in your sdcard
6.Reboot your g1 and hold down the "HOME" key and it should bring up the flash image recovery screen. Choose apply any zip from sd and then choose "update.Engineering-SPL-HBOOT-1.33.2005-signed.zip". It finishes almost immediately with message saying successfully flashed(if it doesn't you prolly ate to much chicken ).
7. Then after it is installed select the restart option and then load into fastboot mode (Hold "BACK" arrow key while its restarting). Once fastboot is loaded the SPL info should say HBOOT-1.33.2005 (SAPP30000). If it does congrats almost there!!!!! If it doesn't, you did somthing wrong and you need to retrace you're steps.
8.Exit fastboot by hitting the "GREEN" button and before the phone boots up hold the "HOME" button and then go to "apply sdcard:update.zip". Let it install and VOL LA you installed your ROM. Preform a reboot and you will now have a rooted phone with a custom ROM
1) thanks for posting, ive tried to follow other instructions over the past few days to no avail
2) any chance of hosting the sappimg.nph file somehwere else? I cant access rapidshare from my phone. I would greatly appreciate it.
OMG SOOO EASY!!!! Mods should sticky this as the new root / rom upload process
I was running android 1.6 on tmobil mytouch 3g with perfected spl 1.33.2006
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Thanks for posting - much appreciated. Can I ask what the benefit of changing the SPL is? Is this required?
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
ParanoiaPersonified said:
Can I ask what the benefit of changing the SPL is? Is this required?
Click to expand...
Click to collapse
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
ParanoiaPersonified said:
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
Click to expand...
Click to collapse
You can flash it back to the original SPL. You would then be unrooted. Look at Amon_RA's original rooting process with Gold Card. At the bottom, he gives directions on how to return your phone to the unrooted state in case you need to do that.
Thanks, I thought with one-click-root, once you'd got the recovery rom flashed, you were done - that you had root and could flash what you liked.
For the record, I'm Voda 32B, but have perfected SPL .0007.
[EDIT] Yes, that thread has a file to return to stock, but only for MT3G, which is why I am hesitant to flash a new SPL to my device.
I've still seen in lots of places mind, that suggest this process works without the flashing of a new SPL. Such as: http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
[EDIT]
What happened to the ability to format and
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
FenderGuy said:
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
Click to expand...
Click to collapse
You still can, but not with the recovery img ur using wirch is cyanogen 1.4. Just flash amans new recovery img and you will be able to partion
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
backup failed:I received that could not run command
cparekh said:
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
Click to expand...
Click to collapse
I have rooted my myTouch3G with the 1-click method (twice actually, needed to take it to the store), and I have the perfected SPL 1.33.2006.
The main issue with this SPL is that it does not allow you to use fastboot. As far as I know, this has nothing to do with root access.
Can confirm that I've performed the OP's procedure but *without* flashing a new SPL, and everything is working fine.
Now running CyanogenMod 4.2.2 w/ CM Recovery 1.4.
Does anyone have the link to the partitions recovery? I tried to put the Hero recovery on and it does not want to come on and I still show the Cyanogenmod v1.4 +jf....someone help
Also in the top it has Andriod system recovery (2)? I did it twice, how do i take one off?
kryptik06 said:
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Click to expand...
Click to collapse
Any word on rehosting? I know its a pain but my phone is my only internet connection.
acis said:
Any word on rehosting? I know its a pain but my phone is my only internet connection.
Click to expand...
Click to collapse
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
vodafone htc magic 32b gives error to ur method
error "update fail model id incorrect "
i think this sappimg is for the mytouch and not for htc magic vodafone. so it gives this error.
do you have any solutions for this.
thank you
kryptik06 said:
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
Click to expand...
Click to collapse
Flashed last night, worked perfectly. I had no idea it was going to be this much faster. Thankyou.
I am looking for a rom that has a wifi tether app!
yes I am to the step where u download a rom and I am looking for a rom that has WIFI TETHER for my laptop...
much will be appreciated if u can help=D
- THANKS
well i guess right now i just want my phone rooted...
i just want a rooted phone cuz i can download a wifi app i just need a rooted phone....thanks for your post though....much much much much appreciated...nice and simple...other post or vids ive seen go to far in to detail about it and i forget what step im on .lol
-THANKS
ok so its been awhile since ive been here checked the wiki seen a couple threads that really didnt address my questions/concerns so hopefully someone can answer them here
my story starts with a mytouch 3g w/o 3.5 if that matters that i bought off craigslist and someone rooted it and flashed it with jesusfreks 1.51 rom and when i got it home i noticed issues with the wifi not working when i try to start it the phone just says unable to start wifi i googled this issue and saw alot of people had this issue and most common answer was just to re-flash the phone is this right??
second question is right now i dont have a data plan on my phone until this month is up im on a flex-pay and dont want to pay for a full month of data plan i can only use for 5 days so if i re-flash my phone do i have to activate the phone if so will i be blocked out until i activate the phone??
third question is since i dont have a gold card do i have to make one to re-flash the phone if i have to re-flash to jesusfreke's 1.51 rom or would life be easier just reverting to a stock tmobile rom and repeating the whole process since i dont know what whoever before me had this thing did to it???
sorry if these are stupid questions that have already been answered or are common sense i figure i ask now before i have to create another HELP!!! I BRICKED MY PHONE THREAD thanks in advance
First try booting in fastboot (press down back+power). See what SPL and what radio you have. SPL should say something like HBOOT-1.33.0004 and radio should say something like 2.22.32.02 (can't remember the exact radio I have). You should probably write down everything on there and give info on here. Then press menu to turn off the phone.
Boot into recovery mode first (by pressing down home+power) to see if the person before you who rooted the phone had installed a recovery image (you should know how a recovery image looks like). If he has, and preferably Amon_Ra's, then it is rather simple to reflash. Just select wipe data/factory reset from the recovery image, flash a new ROM, and you're all set.
As for the data plan, you can easily skip activation steps and enable wifi and access your gmail through the market. If your wifi doesn't work, then I guess you do have to get someone's SIM with a data plan to activate it. But without having a data plan and wifi not working, I would say your magic is kind of useless.. (well unless you install ASTRO on there and install tons of apks I guess, but still no connectivity)
I don't know if there is a stock tmobile ROM that doesn't have the perfect SPL (mine being vodafone and I haven't researched it) so you probably have to do your research again.
if your on jesusfreks rom you should be able to boot into recovery and install any rom from there as your already have root, you dont need a gold card (unless you borked up and installed a tmo rom already)...
check to see if you can get into recovery by powering down the phone and holding the home key as you power up...if you can do that then just download the rom of your choice, place it on the root of your sd card and install from recovery..
digitaljeff said:
if your on jesusfreks rom you should be able to boot into recovery and install any rom from there as your already have root, you dont need a gold card (unless you borked up and installed a tmo rom already)...
check to see if you can get into recovery by powering down the phone and holding the home key as you power up...if you can do that then just download the rom of your choice, place it on the root of your sd card and install from recovery..
Click to expand...
Click to collapse
when i hold down the home and power key i do get into the recovery screen which has the back up restore and apply sdcard update etc... so i guess i can just throw another rom onto the card and update that way???
koreancanuck said:
First try booting in fastboot (press down back+power). See what SPL and what radio you have. SPL should say something like HBOOT-1.33.0004 and radio should say something like 2.22.32.02 (can't remember the exact radio I have). You should probably write down everything on there and give info on here. Then press menu to turn off the phone.
what i get in flashboot is the following
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO 2.22.19.26I
MAY 27 2009,19:06:41
Boot into recovery mode first (by pressing down home+power) to see if the person before you who rooted the phone had installed a recovery image (you should know how a recovery image looks like). If he has, and preferably Amon_Ra's, then it is rather simple to reflash. Just select wipe data/factory reset from the recovery image, flash a new ROM, and you're all set.
When i go into recovery mode @ the bottom of the screen it says
Welcome Build RA-dream-v1.2.3
As for the data plan, you can easily skip activation steps and enable wifi and access your gmail through the market. If your wifi doesn't work, then I guess you do have to get someone's SIM with a data plan to activate it. But without having a data plan and wifi not working, I would say your magic is kind of useless.. (well unless you install ASTRO on there and install tons of apks I guess, but still no connectivity)
Thats my problem right now i dont want to wipe and find out i have a brick until i put the data plan on my plan.....
I don't know if there is a stock tmobile ROM that doesn't have the perfect SPL (mine being vodafone and I haven't researched it) so you probably have to do your research again.
Click to expand...
Click to collapse
i have tried to answer your questions between the spaces
So i hope this is the right place to ask. I updated the radio to 6.xx and the spl to 1.33.0013 and now i cant boot my custom rom or access the recovery screen, but i can access fastboot. Ive tryed flashing a new radio, recovery etc from the sdk cmd promt and no luck, keeps saying remote: not allow. IS there anything i can do from the fastboot to get my phone back. Sorry if this is realy noobish. Ive searched for 3 days and i've had no luck. PLEASE HELP ME
Sapphire pvt 32a sip s-on g
hboot-1.33.0013 (sapp31000)
CPLD-13
Radio-6.35.10.18
oct 21 2009,22:33:27
You are ok untill now..You have not bricked your phone....you can still recover it using fast boot or recovery...
serach for the correct topic on this fourm...you will surely get info
Ive tryed everything in fastboot and i cant get into recovery. If i could i would have fixed it by now
Tried Goldcard method as well?
I cant do a goldcard again. I cant access the operating system. I cant access the recovery screen. Al i can do is access fastboot. And from there i just get remote: not allow when i try to modify things. I just need a BIG reset button on this phone. Im hitting my head so hard against the wall trying to figure this out. I try to read up but everywhere you go its something different and its all soooooooo confusing. No one makes nay sense
If this is a bad place to ask this, please tell me. My head hurts and im very frustrated because i followed someones write up step by step and i got screwed over. I know it can be fixed!
OK dude, just breathe. By looking at your SPL you've got the myTouch 1.2 (the one with the 3.5mm jack) so you've got o use the goldcard method which is done through hboot and fastboot, if you can get one you can get the other. Let me get to a computer and we'll fix your problem. In the mean time post back and let me know your still here.
Sent from my HTC Magic using XDA App
You need to fastboot an engineering spl first.
I believe 1.33.2010 should do it.
Flash back to the operator's ROM and start all over again; safest approach if you are having a difficult time understanding how to troublshoot your problem.
I try to load a new sippimg.img ( from my understanding that a new spl) And everytime i load it, it says model id wrong and fails to load.
And in fast boot i cant load anything new cause i get the remote: not allow.
How am i suppose to create a gold card another gold card without having access to the phones main operating system?
I just went to http://forum.xda-developers.com/showthread.php?t=529019 and followed that and wasnt able to load the recovery image cause because remote: not allow. So im stuck
Try using this.
Sent from my HTC Magic using XDA App
I cant create a new gold card, i cant access the phone I created one before but it still gives me a the wrong mode ID code. And i cant do adb because i cant turn on USB debugging since i cant access the phone.
I followed the steps in the link. I loaded the sappimg.img and it loaded it but didnt ask to confirm the install, but it did show a loading bar and when it was completed it never said anything about restarting or anything. It just detected it, loaded it and then nothing. So after that i tryed to load the spl, radio and recovery and it still gave me remote: not allow.
It seems my gold card somehow undid its self. I need to figure out how to make one without being able to access the actual phone options. I realy do appreciate you guys helping!!!! If this gets fixed ill kiss all of you. JK!
How long have you had your phone?
3 days But i didnt buy through t-mobile, so no warranty for me
The only other option I can think of is to see if a friend with the same phone can let you borrow his. Luckily the stuff you need to do isn't phone specific, it's only specific to the SD card, so you can remake it with another phone and then use it to finish your's.
I believe the CID that you get (that ridiculously long number you have to copy) is specific to the SD card. I just swapped the goldcard I made for my phone into my wife's and the CID remained the same. Just not sure if using a different model phone will work.
You don't happen to have the CID still do you?
DonJuan692006 said:
The only other option I can think of is to see if a friend with the same phone can let you borrow his. Luckily the stuff you need to do isn't phone specific, it's only specific to the SD card, so you can remake it with another phone and then use it to finish your's.
I believe the CID that you get (that ridiculously long number you have to copy) is specific to the SD card. I just swapped the goldcard I made for my phone into my wife's and the CID remained the same. Just not sure if using a different model phone will work.
You don't happen to have the CID still do you?
Click to expand...
Click to collapse
I still have all the emails for when i originally made a gold card and the goldcard.img.
You can try doing the steps in Hex Editor, where you copy the lines from the goldcard image over to your SD card again. Then try flashing the sappimg again and see what you get.
On it! :cross fingers:
I did all the Hex editor stuff. And i still get Wong model ID when i try to install a new sappimg.img. I tried several times and double checked the hex editor.
i was given a lost or reported htc magic 32b, dude just wanted a newer phone
so it got blacklisted, im using it as a test phone to learn rooting flashing roms etc
i made a goldcard i copied the sappimg.nbh and FlashRec files etc and all went well, then i get to the welcome screen emergency call change language
i cannot go any further if plug in the usb cable i get nothing, as i cannot activate
the phone to get into menu add the rest of the files to flash etc i have sdk working but like i said it does not see the phone, as i said i am using it as a tester for my actual working htc magic 1.6 that i want to flash cyanogen rom.
i thought id rather brick the blacklisted one as it wont work anyway, before i try the methods on my working one.
Moving to General
bump any ideas plz
I don't think you can.. I tried that without data plan but noway to pass the activation for mytouch 3g. just use your other mytouch simcard (assuming you have dataplan) and activate it..then do all the rom install.. from then on..you don't need the dataplan..you will have a skip option with all roms...
(borrow friend's sim for few seconds to activate)
(get the dataplan and cancel it when you think you don't need it)
I have a basic question,
I'm only asking because there's far too much
information available,
on here
and its not easy to find what best fits my
needs.
I have an unlocked A3335 wildfire ( Telstra NextG network 3g version), I'm using it on optus,
my boyfriend was useing it he dowloaded a
font change app for the phone,
but when he did it my phone went in to
bootloop mode.and keep't bootlooping again
and again
all i get is the start up screen,
with yes you guessed it
(Telstra NextG network 3g crap)
All I want to do is try and get my phone from
this bootloop mode and try and recover...
my phone back to how it was.
Its hard to explain,
ok when i go in to the boot screen
i have this on my phone
BUZZ PVT SHIP S- Off
HBOOT-1.01.0002
MICROP-0622
TOUCH PANEL-ATMEL224_16ab
RADIO-3.35.20.10
DEC 27 2010,
17:49:10
and it reads the sd card,
it said the Boot Image. is missing
dont know why a app would take this out
but this is what happen
So Now when i did the fastboot on my phone
it done nothing,
then did the clear storge.
then i did the recovery
it rebooted to a black screen with A
triangle shape with one of these things
! in the middle of it,
but still stuck
I can follow the regular guides for rooting,
can any one help me to get my phone back to
how it was please
And I really don't care about this part much,
but would be nice to have it off the phone
and remove all the telstra junk and restore
the phone back to how HTC would ship it,
(all the junk apps they include could easily be optionally installed from marketplace if you want their crap...)
(obviously I'm in Australia also)
There are so many ROMS and options available,
including the ones from shipped roms
(it wont let me post the link because I'm new).
I just want my phone back to how i got it,
can any one help me please....
please send me a private messages,
with a step by step guide to do so thanks..
Since you are s-off u can use fastboot flash from windows to flash a clockwork mod recovery. After you do that, every thing will be simple. Just download a rom in zip format,put it to sd go to recovery( just do what you have done to see the triangle in blackscreen. Note that if u flash cwm you will no longer see that triangle). Then use your volume down button to reach install zip from SD card. Hit it with joystick press. Choose zip. Install it. Just do a data- factory resetting before you install zip.
I prefer cyanogen mod 7. U may use latest stable or nightly build. Feel free to post any doubt you have. We are happy to help you.
Regards shah.
Sent from my HTC Wildfire using XDA App
thank you so much your a life saver it work't have my phone back now yay
K. Be in touch with xda. Find out more. Make your wildfire yours and not htc's.
Thank u
Sent from my HTC Wildfire using XDA App
well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help
aussiegirl said:
well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help
Click to expand...
Click to collapse
nope that gold card image will send to ur email..and u need to copy that gold card image to ur sd card...
Well if the hboot is 1.01.0002 with S-OFF then it must be done using xtc clip. So fastboot flashing shouldn't be working. And u don't need a gold card for S-OFF wildfire .
I would just suggest to flash a stock froyo WWE RUU which also removes the carrier bloatware. If ruu proccess gives errors u can copy the romzip from that ruu and use it with pc49img process from hboot menu. And ofcourse fat32 memory card is must for pc49img process
Sent from my Blade using XDA App
Hey can you explain what happened now? You said that yours is working now before 2 days. ( in second last post). So what happened now? What have you tried with your phone?
And...
So the gold card question, let me explain.
Gold card is just a patch tool, with the help of which you can unlock HTC boot loader , or in detail, you can unlock HTC 's boot loader protection(that's what we call as s-off) , which is commenly locked( that's we call as s-on) , for a user mode phone( a phone that is for sale to normal user), and it is done so because a normal user never need a root permission, over clocking etc. Also user defined kernal,rom,radio updates unless HTC provide them with updates.( and of cource to protect their device and its custom os made by HTC.
So being an s-off device, we can say in simple, unleash the potential of android.( that's what i said, make the device yours and not HTC 's).
And s-off. In can be done using many ways, find them in topic " complete wildfire index " , one of which is using goldcard method. It is also explained in topic/ stickies " downgrade hboot to xxxx". You can download an attached file called buzz downgrade from that topic, and its what you all need.
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems), so you can use custom/ safe ruu, instead. Which contains no radio image, check " complete wildfire index" else go for custom os like cm7.
But before all you should mention what you need.
1) r u trying to put custom os, or do you need original os?
2) do you want your phone to be a true android gadget, or just normal phone which is provided by HTC?
3) what kind of user r u? Normal user or a tech junky?
4) r u satisfied with android 2.2 or need 2.3?
Get us the answers, along with your current boot menu( where you find recovery option) details. So that we can help you properly.
That's all dude. Its 2.30 am here in India, so i should wish myself a good night, swtdrmz. Cu ltr.
Sent from my HTC Wildfire using XDA App
showlyshah said:
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems)
Click to expand...
Click to collapse
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App
bharatgaddameedi said:
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App
Click to expand...
Click to collapse
now im lost where do i fine the right one to use do you know how many there are out there this phone is doing my head in i try to flash the system.img and the boot.img and a stock rom and still nothing im ready to give up to be honest
Have you installed clockwork mod recovery? If not do it first. Use fastboot flash from windows or linux, then download latest cyanogen mod nightly and put it in your sd. Then use install zip option from cwm recovery to install cm7. Done. Its what you want. No radio harm will be done unless you flash a radio using any methods.
All info will be available on thread" complete wild fire index" in this forum. Tools, recovery, how to, rom, and every thing else are available in that thread.
Sent from my HTC Wildfire using XDA App
i have all of these things you said here what i dont understand i have tryed this so many times and still dosent work and its abit hard with work as i dont get much time to fix this phone for the past week has given me nothing but a pain in the rear end and its doing my head in...
ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand
aussiegirl said:
ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand
Click to expand...
Click to collapse
No expert but looks like you have an empty sdcard and system.I think you need to get a rom onto your sdcard (cm7 good choice) and then through recovery apply the rom. Zip and reboot after. DONT DO A WIPE.the telestra screen is just a splash screen which will always load before the system searches for data to load,next would be boot loading screen but yours by the looks and sounds of things does not achieve!! Probably cos its not present due to not having a rom installed.hope I helped if not best of luck. Members are very helpful here and cos you can access hboot I am 99% sure this will be fixed for you. Regards Slymobi.
Sent from my HTC Wildfire using XDA App
i have a rom on my sd card but the thing keeps saying FAILED? NO SUCH FILE FOUND ?
Download this: http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
Enter HBOOT.
Wait until it finishes trying to load a zip file.
Choose FASTBOOT to enter FASTBOOT USB mode.
Run the downloaded file.
It should then install the original HTC rom.
Or maybe try PC49IMG method if you haven't already?
On your PC click start and type in the search box %temp%,
Keep your eye on this folder and doubleclick your ruu, a new folder should appear in temp folder,
Open it and search for rom.zip,
Copy it to your desktop and rename it to PC49IMG.zip then copy to your SD card and boot into hboot, it should find the zip and install.
Sent from my HTC Wildfire using xda premium
@scratches post. I couldn't remember the method but that's exactly how I got my ruu to install so I could revolutionize.
Sent from my HTC Wildfire using XDA App
i have done that already still no go