Related
Only real issue I have with this phone is that it is real easy to dial out accidentally.
Many times when putting the phone back in it's pouch or into my pocket I set the thing ringing.
I tried disabling the green phone button with AE buttonplus but if i'm on the contacts page and touch the green button it still rings.
An body have any idea how to disable the green button other than AE button plus (mentioned in another thread) or have any thoughts on a solution?
Cheers
Toggs
Toggs said:
Only real issue I have with this phone is that it is real easy to dial out accidentally.
Many times when putting the phone back in it's pouch or into my pocket I set the thing ringing.
I tried disabling the green phone button with AE buttonplus but if i'm on the contacts page and touch the green button it still rings.
An body have any idea how to disable the green button other than AE button plus (mentioned in another thread) or have any thoughts on a solution?
Cheers
Toggs
Click to expand...
Click to collapse
Using S2U2 will prevent you from call accidentally, or as we call it: a pocketcall.
Thanks for the reply but the problem with S2U2 is it only works after it's activated by the timeout - before it locks the buttons are still active. But even with general handling of the phone it's just too easy to hit the call button especially when you mean to hit the left softkey.
I'll remember "pocketcall" tho...
Toggs said:
Thanks for the reply but the problem with S2U2 is it only works after it's activated by the timeout - before it locks the buttons are still active. But even with general handling of the phone it's just too easy to hit the call button especially when you mean to hit the left softkey.
I'll remember "pocketcall" tho...
Click to expand...
Click to collapse
I fire up s2u2 by hand before pocketing it and never had any problems
just block the screen by pressing end call for +-3 sec.
If you have enabled the lock then the suggestion by zuadao, does not work! What I do instead is, before I put it in my pocket etc. I press the hard botton at the top to switch it off!
Thanks guy's - these are all OK if you can get into the habit and if you are putting phone away - but, like I said, it's also a problem in general handling of it when it's in use.
For me, the best would be to disable single press call - but i'm struggling to do it.
I do appreciate the answers tho
zuadao said:
just block the screen by pressing end call for +-3 sec.
Click to expand...
Click to collapse
This is what I also do, works a treat. Would be nice to hold it for 1 seconds though instead of 3.
I use gyrator 2. I flip my mobile face down and it will lock automatically and turn off screen. I am lazy to push +- 3 secs end call.....
kuyichi said:
I use gyrator 2. I flip my mobile face down and it will lock automatically and turn off screen. I am lazy to push +- 3 secs end call.....
Click to expand...
Click to collapse
Good tip, I will try that
(my first post)
What i usually do is to press the top on/off button to turn off the screen before putting into my pocket.
Another option is the "auto lock" feature in HD Tweak. It locks your phone each time you turn the screen off, which alleviates having to hold the end key down for a few seconds.
Best oh yes by FAR the best solution is TouchLockPro
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
I would say not. There appears to be no power to these lower buttons while in standby, so no software could work?
Kev
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button?!
Click to expand...
Click to collapse
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Im also afraid for that power button... used it a lot on my diamond so it got bricked, its so gentle... Im using it as much as little possible now on mine HD for that reason.
I have s2u2 unlock on stylus out, so I pull out the stylus, the HD comes on and unlocks. It's so simple.
gadgetuk437 said:
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Click to expand...
Click to collapse
gadgetuk437
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Click to expand...
Click to collapse
That's not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
gadgetwizard said:
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
Click to expand...
Click to collapse
That is correct.
Power consumption, in this case, depends on what applications are left running. GPS, streaming video, etc would be a bad idea to leave running. But more workday apps use very little juice when the huge power drain of the screen is turned off.
MackTK said:
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
Click to expand...
Click to collapse
Nope... I've tried that app. Its great for locking down the normal WM hardware buttons, but it doesn't have the HTC bespoke "Home button" on the list of configurable buttons.
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
If you lock it, how do you want to wake up the device?
I wouldn't mind finding a way to do something similar. Maybe not lock the button entirely, but make it so that you have to press the power button for a long time (say 3 secs), or press the power button and the hang up button and the same time.
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
chris10230 said:
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
Click to expand...
Click to collapse
No, this wont do what is needed. The Keylock simply stops someone from using the phone. It won't stop the screen from coming on accidental in you pocket.
You can 'lock' the phone from accidental use by pressing and holding the 'hang up' button, but again this has nothing to do with screen activation.
It is true that pulling out the stylus will both switch on and unlock the phone though, so disabling the power button may not be all bad. I still think it would be better to activate the screen via a single long button press, or some such.
Totally agree with swinster's comment and proposal.
- Lock the phone by pressing + holding "hang up" button (already implemented)
- Keep phone locked and screen off until
either stylus is pulled out
or power button and hang-up button are pressed at the same time
But disable screen-on when power button alone is pressed (like it is now).
- Anybody able to implement this proposal?
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
This would be a great solution.
Mine switches on in my pocket all the time, they should have recessed the button, I thought about trying to remove it.
anorak22 said:
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
Click to expand...
Click to collapse
Its a bit of an overkil, but my laptop come with me most places.
Reminds me of the Morecambe and Wise sketch (??) where the battery was the size of a suitcase.
I think I need a car charger - which brings me to another grumble - why didn't they implement a standard mini USB interface?
Standard mini usb fits and charges.
ALExander
alx37 said:
Standard mini usb fits and charges.
ALExander
Click to expand...
Click to collapse
Ooh, Ok. I thought they were different shapes. Will look into this.
[Edit - I have just read that it IS backward compatible with USB - the different shape is becasue the HTC connection supplies audio]
I'm guessing that any old Car Charger with mini USB will work then?
anorak22 said:
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
Click to expand...
Click to collapse
When you set EnableInputAtSuspend = 0, it will not unlock the power button at suspend. . It will then only awake via the Stylus. But I do not know if this setting also works on the Diamond2.
I am having some odd problems with mine if i press the power button to put it into standby. Sometimes when i press it it turns itself straight back on others it will come back on if i shake it (like the G Sensor is somehow linked to bringing it out of standby). Can you guys check this so i can confirm if i have a faulty unit please?
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
Thanks, sounds plausible, I'll call the supplier tomorrow.
I am sure that on my D810 I could set the lock on at zero seconds with no pin code. Then the keylock would come on every time I came out of standby but with no change of accidentally starting applications and making calls.
On my D2 the password is compulsory for keylock.
Any solution here? I don't want a pin code.
I power button fix would be even better to also save battery. The accidental turning on is a very annoying feature.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
ye man,ive got this prob...the phone randomly unlocks bcoz the stylus sensor...im lookin for some application that turns the sensor off....havent found anythin yet...
This is still, by far, the most anoying "feature" of the TD2 phone. I can't believe that HTC did not have the forethought to think that people might actually put the phone in their pockets.
It should be a simple fix so that when the phone is off or in standby, the power button has to be press for say a second before the phone will come on, rather than just a single tap. They can do this to turn the phone off, so why not on?
Hi,
I have read and tried what I could find, but it does not work on my Jade.
Are there any new ideas how to keep the screen from swithching off?
Joe
This is copied from the Jade Manual:
Call functions
When a call is in progress, tap the available buttons on the Phone screen to put a
call on hold, dial another contact for a phone conference, enter notes about the
conversation, and more.
None of the above is possible because the screen disappears by itself.
Do HTC know about it? This seems to be a major f...up.
This problem has been discussed in many threads, there is no real solution.
If you activate the speaker for hands-free immediately after connecting the screen keeps on.
on mine the screen goes off... but if i press one fo the direction buttons it comes back on and stays on so i can use the keypad or look at contacts etc
Thank you guys.
I will try to contact HTC because I think this is a major fault. There is no access to those Call Functions if the screen disappears.
But people should also have the choice of switching the screen off to conserve battery during long conversations. That should be one of the Call Functions.
I tried to bring the screen back by pressing the OK button, but instead it ended the call. So why do we need the END button ?? Poor HTC. They are in front of themselves. Ever producing new half-baked models without thinking it properly out.
I have not tried the < or > buttons, but it would be risky because usually the OK button gets activated as well.
Has anybody on any HTC forum tried to petition HTC? I think this issue would be a nice one for a petition.
Joe
you say you dont want the screen to switch off but u dont want the < and > active?
tring to understand what you want/dont want here?
if i press < or > the screen comes on fully functional...
I did not say I did not want the < > keys active. I don't care what those keys do because I don't use them. The reason is that when I use them, I always inadvertently activate the Enter button. On my phone that terminates the call - the same as the End key.
It would be nice (and even logical) to have the Enter (OK) button to wake up the screen instead of the directional buttons. Maybe there is a registry tweak to do that.
Joe
jfranek said:
I did not say I did not want the < > keys active. I don't care what those keys do because I don't use them. The reason is that when I use them, I always inadvertently activate the Enter button. On my phone that terminates the call - the same as the End key.
It would be nice (and even logical) to have the Enter (OK) button to wake up the screen instead of the directional buttons. Maybe there is a registry tweak to do that.
Joe
Click to expand...
Click to collapse
I think it's about getting used to and familiarising with the intended design and button functions. Now after nearly 12 months using Jade I have no complaints. Even using phone banking, no problem with inputting the required numbers. Concur with MvBoe and DJHicks. It should also be acknowledged that this is 80% PDA and 20%phone (roughly).
MvBoe said:
This problem has been discussed in many threads, there is no real solution.
If you activate the speaker for hands-free immediately after connecting the screen keeps on.
Click to expand...
Click to collapse
DJHicks said:
on mine the screen goes off... but if i press one fo the direction buttons it comes back on and stays on so i can use the keypad or look at contacts etc
Click to expand...
Click to collapse
I was playing with the < and > keys to try to bring the screen back on, and I can definitelly tell you it does not work on my phone.
While doing that, I accidentally pressed the Power on/off switch - and voilá - the screen came back on and stayed on.
I repeated the experiment to confirm it.
Why didn't I think of it earlier? So obvious.
Joe
jfranek said:
I was playing with the < and > keys to try to bring the screen back on, and I can definitelly tell you it does not work on my phone.
While doing that, I accidentally pressed the Power on/off switch - and voilá - the screen came back on and stayed on. I repeated the experiment to confirm it. Why didn't I think of it earlier? So obvious. Joe
Click to expand...
Click to collapse
Good for you Joe. I suppose many other Jade users are already using that method. I thought you knew it already but wanting something more simpler.
azahidi said:
Good for you Joe. I suppose many other Jade users are already using that method. I thought you knew it already but wanting something more simpler.
Click to expand...
Click to collapse
Quote:
Originally Posted by jfranek View Post
I was playing with the < and > keys to try to bring the screen back on, and I can definitelly tell you it does not work on my phone.
While doing that, I accidentally pressed the Power on/off switch - and voilá - the screen came back on and stayed on. I repeated the experiment to confirm it. Why didn't I think of it earlier? So obvious. Joe
Hi azadhidi
correct me if im wrong is this not the only method to wake ur phone while making a call ie pressing the power button
haree said:
Quote: correct me if im wrong is this not the only method to wake ur phone while making a call ie pressing the power button
Click to expand...
Click to collapse
Also with other buttons if you set your phone to wake up with all buttons. See item #10 here http://forum.xda-developers.com/showthread.php?t=476493
Hi guys!
So I'll have to wait for my preordered HD2 untill 20th November here in Poland, but watching all the preview videos, a question arose in my head. I know the device isn't out yet, but its rom builds are already flying around, so maybe someone knows the answer. Will it be possible to disable showing of the lock screen after waking up the phone with the end call/power button and the device taking you immediately to the homescreen? I'm used to that on my TD2, and I think that using the phone this way is just much faster.
If i have undersood ur question correctly by completely disabling lock screen of ur future Leo, then yeah, thats possible. If u navigate through ur moving cursor to Settings, then Sound and Display and finally to Backlight options, there two options exist, when phone its on battery and/or External power, to either set the time limit to have the screen locked (and dim backlight of course) or to completely diselect it, which actually disables Leo to show and/or show lock screen.
Hope that clarification helped you
It sure did, thanks a lot I just hope that the buttons on the face of the HD2 will turn out to be as "shallow", flat and "stiff" as they look like in the vids, so that no accidental pressing of the end key while the device is in the pocket will be possible in practice
jgal said:
It sure did, thanks a lot I just hope that the buttons on the face of the HD2 will turn out to be as "shallow", flat and "stiff" as they look like in the vids, so that no accidental pressing of the end key while the device is in the pocket will be possible in practice
Click to expand...
Click to collapse
I did not think about the accidental pressing of END key before, but this will surely worry me, atleast I get the handset myself and test it in real-life...
Well even if any accidental cliks will be happening, then the lock screen will actually come in handy
well even if the buttons get pressed somehow, the screen won't react to pressure so only buttons will work if there's no lockscreen
You're right, good point hehe I guess all of us WM fans will have to get used to capacitive screens and their advantages/disadvantages
I think there will be 2 potential risks...
1. "Send" button is pressed accidentally more than once (last dialed number will be dialed)
2. Any keys get accidentally pressed continuously (device will remain on impacting battery life)
So yet a good screen locking solution will be recommended
3. "end call/power" button pressed and hold -> device turns off (at least I think so..or is there a "confirmation screen"??) -> you don't get any incoming calls/messages/etc at all =)
Btw, if you turn off the stuff as B3ler3fonte said, would there be any locking at all? So would touchscreen etc be allways "ready" and consuming battery?
In my Diamond2 (I dont use any lock screen or anything) when the screen is turned off and I press long the power button, the confirmation for powering off the device does in fact pop up, but the screen remains turned off, so its impossible to confirm the power off prompt (I see the prompt popped up when I press the pwr button once again to turn on the screen). So probably no threat from here. And even if the screen activates and the prompt for turning off the phone does come out, there's no way of confirming it in your pocket - thats the capacitive screen advantage. But the battery draining issues may occur at some scale... I guess we'll see how it all turns out in real life. The probably unavoidable problem will be if the end button would be possible to get pressed by accident - then we would be facing constant battery drainage with the lockscreen always appearing for no reason.
kabakara said:
...
Btw, if you turn off the stuff as B3ler3fonte said, would there be any locking at all? So would touchscreen etc be allways "ready" and consuming battery?
Click to expand...
Click to collapse
That could help but won't much, because(at least current models) they wake up upon any reminder, battery low, call, text, etc. Besides you will have to use both hands to turn phone on (the top button, unless you got ET fingers ) HD is tall...
Cannot see that menu item
B3ler3fonte said:
. If u navigate through ur moving cursor to Settings, then Sound and Display and finally to Backlight options, there two options exist, when phone its on battery and/or External power, to either set the time limit to have the screen locked (and dim backlight of course) or to completely diselect it, which actually disables Leo to show and/or show lock screen.
Hope that clarification helped you
Click to expand...
Click to collapse
Sorry but there is no setting for lockscreen in this menu. There is only settings for the backlight in battery or charged mode.
There is no control for the lockscreen at all Still looking for a way to completely disable this damned lockscreen.
Agreed - even the entry in the Settings tab that claims to control the lockscreen seems to have no impact (I have mine set to 12 hours and it completely ignores that) and the standard registry hacks don't seem to have any effect.
This is a real puzzler!
jgal said:
Hi guys!
So I'll have to wait for my preordered HD2 untill 20th November here in Poland, but watching all the preview videos, a question arose in my head. I know the device isn't out yet, but its rom builds are already flying around, so maybe someone knows the answer. Will it be possible to disable showing of the lock screen after waking up the phone with the end call/power button and the device taking you immediately to the homescreen? I'm used to that on my TD2, and I think that using the phone this way is just much faster.
Click to expand...
Click to collapse
back to the original topic:
changing the registry key: HKey_current_user/ControlPanel/Backlight/AutodevicelockEnable to value '0' (zero) works with other 6.5 roms
by default it must have seen to '1'
edit: my bad, its been solved already
idrisito said:
back to the original topic:
changing the registry key: HKey_current_user/ControlPanel/Backlight/AutodevicelockEnable to value '0' (zero) works with other 6.5 roms
by default it must have seen to '1'
edit: my bad, its been solved already
Click to expand...
Click to collapse
Is it solved already?? i can`t find it
mika34 said:
Is it solved already?? i can`t find it
Click to expand...
Click to collapse
the clarification was made to the guy who started the thread in post 3. if thats not it then the reg change i have put it should disable/enable the lock screen if the power button is pressed