Related
Hi All,
I have bought Samsung Galaxy 3 5 months back... the model no is GT-I5801. I did rooting to upgrade from Android 2.1 to 2.2 but the model no got changed to GT-I5800. Now my phone is dead slow... battery also got drained soon.
I really frustrated by using this change.
Can you anyone please help on this how to rollback all these things.
Regards
Ragavendran
Hi...
Try flashing an Eclair rom with bootloader
ragavendrang said:
Hi All,
I have bought Samsung Galaxy 3 5 months back... the model no is GT-I5801. I did rooting to upgrade from Android 2.1 to 2.2 but the model no got changed to GT-I5800. Now my phone is dead slow... battery also got drained soon.
I really frustrated by using this change.
Can you anyone please help on this how to rollback all these things.
Regards
Ragavendran
Click to expand...
Click to collapse
Go to the link : http://forum.xda-developers.com/showthread.php?t=1063940 or http://forum.xda-developers.com/showthread.php?t=1125387
Scroll down to ASIAN ROMs...choose which one you want to flash...go ahead and it should get restored to I5801.....
ragavendrang said:
Hi All,
I have bought Samsung Galaxy 3 5 months back... the model no is GT-I5801. I did rooting to upgrade from Android 2.1 to 2.2 but the model no got changed to GT-I5800. Now my phone is dead slow... battery also got drained soon.
I really frustrated by using this change.
Can you anyone please help on this how to rollback all these things.
Regards
Ragavendran
Click to expand...
Click to collapse
flash attached as one package..
but before flashing bootloader i wld recommned to close all running programmes in bg & then open odin & flash..
ranadip.bswas said:
flash attached as one package..
but before flashing bootloader i wld recommned to close all running programmes in bg & then open odin & flash..
Click to expand...
Click to collapse
Hi
What do you mean?
Flash the same way as we flash roms?
Coz I would be in download mode, so how come can I have apps running?
Even I need i5801 during boot, as I dropped my cell in water, its working fine now but I can't hear during a call or play a song (I mean things are not audible & so I need to contact Samsung care center) so need either ddjp2 wid bootloader or the file you provided.
Thanks in advanced.
dabhirahul said:
Hi
What do you mean?
Flash the same way as we flash roms?
Coz I would be in download mode, so how come can I have apps running?
Even I need i5801 during boot, as I dropped my cell in water, its working fine now but I can't hear during a call or play a song (I mean things are not audible & so I need to contact Samsung care center) so need either ddjp2 wid bootloader or the file you provided.
Thanks in advanced.
Click to expand...
Click to collapse
^I guess what he meant was that close all the background applications on your PC/Laptop before initializing the process.
h4r5h said:
^I guess what he meant was that close all the background applications on your PC/Laptop before initializing the process.
Click to expand...
Click to collapse
Ya . Thnx h4r5h ..
Sent from my GT-I5800 using Tapatalk
DDJP2 on samfirmware is wid a bootloader.
Anyway thanks for that small file (boot.tar)
Can I flash only the wanted portions of a rom after removing the rest using 'total commander' always.
Hi,
I have my new Arc S and damn this phone is sexy I love it
I have a problem though
I can not unlock bootloader it wont let me, it is locked to three network
The question though
Is there any kernel I can flash ?
How do I get recovery ? can i get recovery ? DONE
Please say I can get a MIUI rom ?
Reboot options in power menu ?
Been looking around for an hour cant find nothing, could anyone be so kind as to help ?
Model LT18i
2.3.4
4.0.2.C.0.5
http://forum.xda-developers.com/showthread.php?p=21237127
Sent from my X10 using xda premium
chiefy009 said:
Hi,
I have my new Arc S and damn this phone is sexy I love it
I have a problem though
I can not unlock bootloader it wont let me, it is locked to three network
The question though
Is there any kernel I can flash ?
How do I get recovery ? can i get recovery ? DONE
Please say I can get a MIUI rom ?
Reboot options in power menu ?
Been looking around for an hour cant find nothing, could anyone be so kind as to help ?
Model LT18i
2.3.4
4.0.2.C.0.5
Click to expand...
Click to collapse
The Kernel flashing are only for unlocked bootloader. You can look for paid method http://unlock-bootloader.com/
MIUI are only for unlocked bootloader
Reboot in Power button there are couple of Mods here check the link in my signature you'll find few of them here.
Use Search.
Post in the correct forum.
Mod please close and delete
Sent from my LT18i using xda premium
Okay, so its been a week since I got a Galaxy Note...
I haven't rooted or anything and its running no the firmware is "XXKL3" and baseband is "N7000DDKL1"...
The phone was working completely fine until today morning, whenever someone calls he gets "The number you have dialed is out of coverage area"....
While out going calls work perfectly fine.
So I removed the SIM and put in Vodafone SIM which worked fine in Note....
Then I put the non-working IDEA SIM into another phone and it was working fine too....
Then I put the IDEA SIM back in the Note and I once again had the same problem.
I tried a hard reset from recovery but that didn't work either
Has anyone experienced the same problem?
Any solutions?
On a side note if nothing works out I am planning to flash the phone but the HotFile link for "N7000ODDLA1" is not giving me speeds more than 30 KB/s.... -_-
So, has anyone mirrored the firmware to another file hosting site?
If yes, can someone provide me the link?
If vodafone works n idea not working, means service conflict is there. Check call setting.
Latest version is ddlb2
Go to dev section n find my thread n7000 stock roms, it is sticky thread.
Sent from my GT-N7000 using xda premium
dr.ketan said:
If vodafone works n idea not working, means service conflict is there. Check call setting.
Latest version is ddlb2
Go to dev section n find my thread n7000 stock roms, it is sticky thread.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thank you for your reply Dr. Ketan....
The problem got fixed when I switched to GSM mode....
I was gonna flash it with a stock firmware but I just thought if its getting fixed by switching to GSM Mode let it be.....
I will just flash when Note get the ICS upgrade
[email protected] said:
Thank you for your reply Dr. Ketan....
The problem got fixed when I switched to GSM mode....
I was gonna flash it with a stock firmware but I just thought if its getting fixed by switching to GSM Mode let it be.....
I will just flash when Note get the ICS upgrade
Click to expand...
Click to collapse
Hey there, DDLB2 is the solution for the speed related problems you are facing, radio its much better, wifi and 3G, it did help me, I'm on Airtel 3G.
Sent from my GT-N7000 using xda premium
hi guys,
I recently bought a Dell XCD 35 which is known to be Euro blade with 512MB ram. but the one which I bought has only 166MB ram as shown by taskmanager(its the total ram not available ram) and has a baseband no: P729B01
but Blade checker app detected it as a chinese blade and TPT helper app also detected the same.
Since in all forum it says that this device is a euro blade I tried TPT to unlock the RAM but it just shows:
T-Flash ....
error
error
error
error
in green colour
I checked MD5sum and also tried different TPT but none worked..
I installed Swedish Spring RLS7 and now its baseband changed to P729VB01
and still everything says that its Chinese blade..
its very confusing for me..
is it really chinese? is there any real way to check it? i mean the baseband says its euro version but every app says its chinese..
and why does these TPTs show this error.. I mean, even if it is chinese the TPT should flash the device and brick it as far i know(correct me if i am wrong).
Is there any way i can get the TPT to work and before that check if its really chinese variant or not?
Thanks in advance
PS: its a gen 2 device and came with froyo
i have an idea blade which has the same baseband(P729B01)
it has 256 mb of ram but the zte customer care says it has 512 mb out of which half is locked.
PLEASE HELP me to unlock the rest of the ram.
->Mahesh
You can try Windows flashing as it works if you get this tpt error.
anshullrocks said:
i have an idea blade which has the same baseband(P729B01)
it has 256 mb of ram but the zte customer care says it has 512 mb out of which half is locked.
PLEASE HELP me to unlock the rest of the ram.
->Mahesh
You can try Windows flashing as it works if you get this tpt error.
Click to expand...
Click to collapse
guys guys guys.. quick help needed..
I did this OSF flasher and now the flasher is showing OPEN in blue color.. Ratio: 0/100. It was 98/100 When I left the device for some time and when I came back I saw this OPEN written there.. is it completed? I mean is it safe to remove?
dont have much time as its battery is draining.. :|
Thanks in advance
I am not able to post the link to the guide which I used :|
Bricked!! can't get past the green android logo
and its moving to left side and back to center :|
HELP!!
Mahesh Sharma said:
Bricked!! can't get past the green android logo
and its moving to left side and back to center :|
HELP!!
Click to expand...
Click to collapse
are you sure you bought the DELL XCD 35
(did you buy a second hand ne or a new dell xcd 35)
(if ts a new one can you plese tell the date of buying/manufacture)
did it come with froyo or eclair preinstalled??
De brick your blade-
h**p://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
(replace * with t)
Its a new Dell XCD35 came with Froyo. Gen 2 it is.
I can get in to fastboot.. but no partitions are detected, when I try to flash any image via ADB it gives an error
Mahesh Sharma said:
Its a new Dell XCD35 came with Froyo. Gen 2 it is.
I can get in to fastboot.. but no partitions are detected, when I try to flash any image via ADB it gives an error
Click to expand...
Click to collapse
h**p://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
if method 3 doesnt work try method 4
and method 5 comes to the rescue if nothing works
you may have to use chinese b14 update in method 5 if gen 1 doesnt work.
anshullrocks said:
h**p://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
if method 3 doesnt work try method 4
and method 5 comes to the rescue if nothing works
you may have to use chinese b14 update in method 5 if gen 1 doesnt work.
Click to expand...
Click to collapse
Tried all but none worked.. Tried the gen 1 and resulted in the same problem.. so tried chinese and ended up with a white line on the bottom of the screen..
I have fastboot(vol + while powering on) access and (with vol + and - while powering on) mode... nothing else
update: tried a tpt with cm7 along with it.. tpt got stuck and rebooted during userdata.img any idea how to trouble shoot this?
when I removed userdata.img it flashed successfully but in a boot loop now with cm logo jumping to the left and then to the center again..
FINAL UPDATE:: DE-BRICKED I REPEAT DE-BRICKED
Mahesh Sharma said:
Tried all but none worked.. Tried the gen 1 and resulted in the same problem.. so tried chinese and ended up with a white line on the bottom of the screen..
I have fastboot(vol + while powering on) access and (with vol + and - while powering on) mode... nothing else
update: tried a tpt with cm7 along with it.. tpt got stuck and rebooted during userdata.img any idea how to trouble shoot this?
when I removed userdata.img it flashed successfully but in a boot loop now with cm logo jumping to the left and then to the center again..
FINAL UPDATE:: DE-BRICKED I REPEAT DE-BRICKED
Click to expand...
Click to collapse
Great.but you didnt unlock any ram.did u?
if u didnt just flash the stock firmware for the xcd35 and go to the service center to get ur phone replaced as u didnt get what u were promised.
anshullrocks said:
Great.but you didnt unlock any ram.did u?
if u didnt just flash the stock firmware for the xcd35 and go to the service center to get ur phone replaced as u didnt get what u were promised.
Click to expand...
Click to collapse
nope, no ram unlocked. its chinese blade
but there is no place where it says that Dell XCD35 has 512mb ram, all I can do is find someone and fight to get it replaced for that I need to get the stock dell rom back in to my device and also change the current green android logo back to dell logo to claim my warranty. thats hell lot of work which I am ready to do only if I find some official report of this device having 512MB ram as dell site and manual says 256MB :|
Mahesh Sharma said:
nope, no ram unlocked. its chinese blade
but there is no place where it says that Dell XCD35 has 512mb ram, all I can do is find someone and fight to get it replaced for that I need to get the stock dell rom back in to my device and also change the current green android logo back to dell logo to claim my warranty. thats hell lot of work which I am ready to do only if I find some official report of this device having 512MB ram as dell site and manual says 256MB :|
Click to expand...
Click to collapse
The Dell site hasn't been updated. Its 512 itself.
Sent from my LT26i using xda premium
Flash the stock logo. Flash the stock ROM and give it back. Complain on Dell's site. Say you'll go to the consumer forum. I did the same ans got a new device.
Sent from my LT26i using xda premium
karthiknr said:
The Dell site hasn't been updated. Its 512 itself.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Ok
Will get it replaced.
Do you have its stock rom? I cloudn't find any stock rom with those dell animations
Mahesh Sharma said:
Ok
Will get it replaced.
Do you have its stock rom? I cloudn't find any stock rom with those dell animations
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1530009
Check them out and flash the correct one.
karthiknr said:
http://forum.xda-developers.com/showthread.php?t=1530009
Check them out and flash the correct one.
Click to expand...
Click to collapse
Thanks
I have to flash splash to remove the green android logo thing and this rom has stock dell boot animation, right?
Mahesh Sharma said:
Thanks
I have to flash splash to remove the green android logo thing and this rom has stock dell boot animation, right?
Click to expand...
Click to collapse
Yes. First,you will have to flash the dell logo and then the ROM.
I'll provide a link to the dell logo in some time.
Here you go. This is the Dell logo.
http://www.mediafire.com/?7msgglylsos79f7
Flash the logo first and then flash the ROM and your phone is as good as stock.
karthiknr said:
Yes. First,you will have to flash the dell logo and then the ROM.
I'll provide a link to the dell logo in some time.
Here you go. This is the Dell logo.
http://www.mediafire.com/?7msgglylsos79f7
Flash the logo first and then flash the ROM and your phone is as good as stock.
Click to expand...
Click to collapse
Thanks man
karthiknr said:
Flash the stock logo. Flash the stock ROM and give it back. Complain on Dell's site. Say you'll go to the consumer forum. I did the same ans got a new device.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
The microphone of my phone got conked..
and has a lot of dead pixels too
not sure whether its dead pixel as it is visible at 100% brightness and almost huge about 15-20 static pixels
Its still under warranty...so getting it replaced(i guess this may not be possible as it may be OOS by now)/repaired...
im gonna stock the phone...thank god i had a backup
Any things i should take care of other than that
BTW registering service complaint through dell india site says
We were unable to verify the Service Tag or Express Service Code you have entered. Please verify your entry or choose one of the options to the right. If you recently purchased a system, please try again in 48 hours.
Click to expand...
Click to collapse
is this normal or not
i googled it found out many such cases
vNa5h said:
The microphone of my phone got conked..
and has a lot of dead pixels too
not sure whether its dead pixel as it is visible at 100% brightness and almost huge about 15-20 static pixels
Its still under warranty...so getting it replaced(i guess this may not be possible as it may be OOS by now)/repaired...
im gonna stock the phone...thank god i had a backup
Any things i should take care of other than that
BTW registering service complaint through dell india site says
is this normal or not
i googled it found out many such cases
Click to expand...
Click to collapse
Mist important thing is flashing the proper stock ROM and the logo. Remember,flash the logo first followed by the ROM.
I've no idea about their reply. Maybe its better if you contact Customer Care first and then ask them about complaining online.
Sent from my LT26i using xda premium
karthiknr said:
Mist important thing is flashing the proper stock ROM and the logo. Remember,flash the logo first followed by the ROM.
I've no idea about their reply. Maybe its better if you contact Customer Care first and then ask them about complaining online.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
if you want to get replacement then you have to brick your phone by deleting the initiation scripts and system partition and it would not boot at all!then go to dell service cenre to get it replaced.this worked for me.
CHEERS!!
I was trying to root the device so i can get it updated from 2.2
I used Odin and tried recovery.tar file and now I'm getting a screen with a phone icon with a caution icon in the middle and a computer icon after it.
So I think I really messed it up
Any help
the thing is Odin is still connected
and no matter how much i try restarting whether in download mode or regularly same thing is still happening.
So if I can get some help would really appreciate it. I hope it can be restored
G
positiveg said:
I was trying to root the device so i can get it updated from 2.2
I used Odin and tried recovery.tar file and now I'm getting a screen with a phone icon with a caution icon in the middle and a computer icon after it.
So I think I really messed it up
Any help
the thing is Odin is still connected
and no matter how much i try restarting whether in download mode or regularly same thing is still happening.
So if I can get some help would really appreciate it. I hope it can be restored
G
Click to expand...
Click to collapse
Look and see if you have recovery mode available >>> volume up+power
nopes even when I boot power + vol up/ vol dn, still get that screen
G
just flash back to stock.. odin still recognize your phone.. thats what i do.. but if odin not recognize your phone, sorry i dont know..
positiveg said:
nopes even when I boot power + vol up/ vol dn, still get that screen
G
Click to expand...
Click to collapse
Does Odin still see the device? If it does, try to install the stock firmware. It may take some time to find it on the net. The first place I would try is here http://www.sammobile.com/firmware/?page=3 and scroll down the page, put in your info in the drop down boxes and submit.
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that was similar
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that was similar
Click to expand...
Click to collapse
What is your model number?
acefsw said:
What is your model number?
Click to expand...
Click to collapse
I think he's talking about SGH-I497 ZSAAT
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that
Try this http://forum.xda-developers.com/showthread.php?t=857608
Click to expand...
Click to collapse
This is the screen I am getting on the tablet
Sent from my HTC Inspire 4G using xda app-developers app
That forum doesn't really work.
Gonna see what I can do still
thanks
acefsw said:
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that
Try this http://forum.xda-developers.com/showthread.php?t=857608
Click to expand...
Click to collapse
Click to expand...
Click to collapse
positiveg said:
This is the screen I am getting on the tablet
Sent from my HTC Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
It is a soft brick and is recoverable. Go to here http://forum.xda-developers.com/forumdisplay.php?f=752 and read all the stickies in the general and dev sections. Apparently, you will not find an at&t rom per se, but can flash a new rom and pit, there are some very good detailed instructions available, but first read, and read some more, and some more after that. Apparently, your type of tab had signed bootloader issues, so be careful which rom you load. Also, as I have suggested with my links, go to the correct forum. I'm pretty sure you have a sgh i987, (based on the fact you were running 2.2 on at&t), and not a tab2.
---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------
acefsw said:
It is a soft brick and is recoverable. Go to here http://forum.xda-developers.com/forumdisplay.php?f=752 and read all the stickies in the general and dev sections. Apparently, you will not find an at&t rom per se, but can flash a new rom and pit, there are some very good detailed instructions available, but first read, and read some more, and some more after that. Apparently, your type of tab had signed bootloader issues, so be careful which rom you load. Also, as I have suggested with my links, go to the correct forum. I'm pretty sure you have a sgh i987, (based on the fact you were running 2.2 on at&t), and not a tab2.
Click to expand...
Click to collapse
Previous link was to the wiki, this one is to the forum. Many links will be dead and you will have to likely download the euro rom from sammobile. There is also a sticky for radio issues.
Thanks appreciate all the help AMD o just realise I said this forum instead of this link that you had pointed to earlier. So again thank you. I will read through it while on break and again at lunch and try and make sure I do it right. Most the rims I see at sammobile are 4.04 or above those should he ok right?
Again thanks and will let you know. Cause I got this yesterday for my wife. So.....
Sent from my HTC Inspire 4G using xda app-developers app
wan903 said:
just flash back to stock.. odin still recognize your phone.. thats what i do.. but if odin not recognize your phone, sorry i dont know..
Click to expand...
Click to collapse
Can you assist in where i can find the original ROM?
thanks
I've let the battery run down, well I think that's what happen anyway cause it's not coming on. I have it plugged into the wall but it still not coming on. But will give it a while and see.
The tablet came back on with the same screen from earlier. but now I'm looking at it it's gone off,
it feels warm but maybe it's me.
I don't know
I'm beginning to wonder about ordering a new one lol
G
positiveg said:
Thanks appreciate all the help AMD o just realise I said this forum instead of this link that you had pointed to earlier. So again thank you. I will read through it while on break and again at lunch and try and make sure I do it right. Most the rims I see at sammobile are 4.04 or above those should he ok right?
Again thanks and will let you know. Cause I got this yesterday for my wife. So.....
Sent from my HTC Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
What is the serial number? The rom has to match the model, you cannot just use any samsung rom.
acefsw said:
What is the serial number? The rom has to match the model, you cannot just use any samsung rom.
Click to expand...
Click to collapse
serial number R2YB51005k
model is SGH-i987
thanks it stopped coming on I realise I would plug it in it will come on then go back off not sure after how long it goes back off I know I had ti plugged in both via wall and computer.
via computer the computer did pic it up cause it showed drivers being loaded
Now no matter what I'm doing I get a black screen
G
Ok got it on charging same screen as I told you about before that I attached earlier
I've looked for the ROM suggest Euro but no luck, the links were dead
And while typing those last few words it gone back off, so i'm guessing it can only be on for say 30 mins.
If I can get the ROM and install it via Odin then I can possibly get it restarted
Thanks
G
positiveg said:
serial number R2YB51005k
model is SGH-i987
thanks it stopped coming on I realise I would plug it in it will come on then go back off not sure after how long it goes back off I know I had ti plugged in both via wall and computer.
via computer the computer did pic it up cause it showed drivers being loaded
Now no matter what I'm doing I get a black screen
G
Click to expand...
Click to collapse
Ok, as I suspectef, you have the galaxy tab, not the tab 2, hence this is the wrong forum. Go to the forum I linked to, there are some stickies about rooting, recovery soft brick, etc. My understanding is that overcome rom or p1000 should work, but you must follow whatever odin procedures, etc. they use. Chainfire has a great post up about recovering, however the file links no longer work. Go there and ask if someone has the file(s) you need. This guy lists the files he used from sammobile http://forum.xda-developers.com/showthread.php?t=996970 You will not find the files in this forum, this is the wrong forum for your device, this is for tab 2 models 31xx and 51xx, yours is a p1000 branded.