Related
Long story short is that yesterday I rooted my HTC Glacier and everything seemed to work fine. I was able to obtain admin privileges by opening a Android terminal and typing "su". Today after deleting a few files from my phone which I thought were junk (face palm) I go into terminal to check if the "su" command still works and I get the message "link_image[1995]: failed to link su CANNOT LINK EXECUTABLE".
I've checked and my s=off is still in place so it's not that that's causing the error message. I'm new to Android so I'm stumped as to what steps to take next in order to regain my admin privileges.
Thanks for any and all advice XDA Community.
Cheers!
Lazerfingers said:
Long story short is that yesterday I rooted my HTC Glacier and everything seemed to work fine. I was able to obtain admin privileges by opening a Android terminal and typing "su". Today after deleting a few files from my phone which I thought were junk (face palm) I go into terminal to check if the "su" command still works and I get the message "link_image[1995]: failed to link su CANNOT LINK EXECUTABLE".
I've checked and my s=off is still in place so it's not that that's causing the error message. I'm new to Android so I'm stumped as to what steps to take next in order to regain my admin privileges.
Thanks for any and all advice XDA Community.
Cheers!
Click to expand...
Click to collapse
Try re-running visionary. It won't hurt anything and it installs su, busybox, and superuser.apk when you run it. It won't mess up anything you already have installed and it might fix your problem.
Also, I'm sure Whosdaman will tell you and move the thread when he sees this but make sure you post questions in the Q&A section.
Ran Visionary and no dice. Thanks for the tip though and sorry for posting in the wrong forum.
Any other ideas?
Try going into xbin (cd /system/xbin) and typing ls and see if su is in there. If it is you could try running rom manager and "fix permissions" if it will let you.
Good deal. I'm actually out fixing someone else's desktop computer at the moment. I'll attempt your advice later tonight.
Thanks again.
Sent from my HTC Glacier using XDA App
Ok, had a free moment and was able to run ls, su was there but unfortunately I wasn't allowed the super user access needed to fix permissions.
Sent from my HTC Glacier using XDA App
Please post questions in Q&A section.
1. Go into settings-applications-manage applications and try clearing superusers cache/data. See where that takes you.
2. If that did not work - isntall a fresh copy of superuser app from the market and once more see where that takes you.
Sorry about that. All future posts of these sorts I'll be sure to put there.
Sent from my HTC Glacier using XDA App
Tried both of your tips but unfortunately am still getting the same error when I run the "su" command.
Any other thoughts?
Sent from my HTC Glacier using XDA App
Update: Superuser automatically downloaded a new binary and told me to unzip it in recover mode.
I went into recover move and attempted to unzip the binary and was greeted with an error message that said the file couldn't be unzipped because it was "bad".
Sent from my HTC Glacier using XDA App
Can you get su in adb?
The more I think about it, You're s-off so you can fastboot new recovery image and then flash new rom with all the goodies preinstalled. May be the easiest route.
To be honest I've had my pocket computer for all of a week, so I'v still not had a chance to play around with adb.
The whole reason I rooted in the first place was so that I could flash custom roms. You think I'll be able to flash even though "su" privileges don't seem to be working properly in my current rom?
Sent from my HTC Glacier using XDA App
Update: It's clear from reading around these forums that the way to get to know your phone and thus be able to fix it is via adb. So I'm installing the Android SDK now. Thanks for all of your help Borodin1 and Grankin01
I was able to root my MT4G with ease using VisionARY r14. My friend purchased a MT4G shortly after and I was trying to root it for him, I used several methods and no luck on any of them.
I've tried using:
1. Visionary temp root>attempt perm root
2. Visionary temp root>terminal (sh root.sh)
3. Visionary temp root>terminal (/data/local/wpx.ko)
From what I understand #2 & #3 basically are the same. So going back to the problem, on MY phone (I don't recall if I used #1 or #2), I rooted with no issues. On his phone, the root is not sticking, every time I go into the bootloader on his S=on still. Nothing stands out or is out of the ordinary, and I would think it would have rooted just fine, the scripts ran via terminal emu and looked okay and all.
Something else I've noticed is when I install CWM Recovery via ROM Manager, after temp root from Visionary the install of CWM Recovery itself was fine, though after going into bootloader and trying to access recovery or booting into recovery from ROM Manager, it doesn't go into recovery, I get the cell with red triangle and "!" on it. I'm assuming that this is a result of it being unrooted still? Anyone else run into a stubborn MT4G like this? I've attached 2 pictures for visual aid of the phone's bootloader screen and about screen below.
Any suggestions or help is greatly appreciated, I've been trying to root it for over a week now and no luck.
I can't see the pics you posted, but I had this issue myself, for me the answer was to find a stock recovery pre ota update and force it, then I ran visionary and terminal with sh root.sh or whatever... Hope this helps... Just try to find an image of pre ota stock rom and go from there... There is a good forum here with a walkthrough to do this... Post results please, would like to know if this was your issue...
Sent from my HTC Glacier using XDA App
Hey I ran into the same problem, with that 86.0000 boatloader u must use the gfree chmod777 process its because its after the ota update
Sent from my HTC Glacier using XDA Premium App
grankin01 said:
Ok guys, first of all Scotty2 gets all the credit for the program R&D. I used my device as a test bed and have tried a couple different kernels (Gr8Gorilla's O/C Kernel and the stock kernel).
Now for the boring stuff ...
This is a very invasive way of rooting your device but the benefit is TRUE S=Off and root privileges throughout the system. As such, you do this at your own risk and if you brick your device neither Scotty2 nor myself are responsible, YOU ARE!!! Do this at your own risk!!!
This is not for the faint of heart and if you have any reservations about doing things like this do not do it.
This process will do three things for your device. I will explain them here:
1. It will set up Super CID on your device allowing you to flash any carriers rom (not just tmobile). Giving you more freedom with your choice of software. The software still needs to be device specific to the glacier for compatability reasons though. Like vodafone glacier roms etc.
2. It will subsidy unlock your device. In other words, it will SIMUNLOCK your phone allowing you to use an AT&T sim card and so on in your device without needing the unlock code from HTC.
3. Most important of all it will turn the RADIO S=Off. This is the ultimate S=Off because the radio is what controls the security flag in the first place. Once you turn it off here it is off everywhere and will allow you pure unadulterated access to your device.
This process will not change your bootloader (unless your on 0.86.0000 and you follow the optional steps).
Now, you may be asking "Why do this? I already have root from your other guide and it has given me r/w access to system and recovery. I thought this meant we had permanent S=Off." This is only partially true. We have had an engineering bootloader and "Label" s=off not radio s=off. When you turn the security off in radio it is off permanently no matter what hboot you have installed engineering or otherwise. However, it is optional but you can still copy the engineering hboot over and it will allow you to flash whatever you like without (as much) fear of bricking your device.
This guide assumes you know how to use ADB. If you do not there are guides all over XDA to show you how. There is even a really good one in this forum. Also here is a video on how to setup adb discovered by topgun303: http://www.youtube.com/watch?v=1UF5w1dKe2U
*NOTE*
For some reason this process can bork your recovery. If you notice after following the steps below that in order to reboot from recovery you have to uninstall/reinstall the battery and hit the power button, just install/reinstall clockwork recovery through Rom Manager in the android market and it will fix your problem.
CONFIRMED: Guide does work for pre-OTA devices!!! Thanks xanz!
Here we go:
If you are already permarooted per the other guide just follow the first 11 steps.
Make sure you have visionary installed on your device. (If you were already permarooted w/s=off ignore this step.)
Download this file:
http://www.mediafire.com/?s7afymwe2wb3x60 New version of gfree with more options! See below.
md5sum: b73c56ca0e21664c5756d4ad295063c5
1. Now unzip the file into your SDK tools directory.
2. Plug your device into your computer.
3. Now open explorer and hold down shift at same time you right mouse click on your SDK tools directory (platform-tools if you have the R8 version of the SDK). Select open command window here. If you are in linux (ubuntu) right mouse click on your SDK tools folder, choose actions, and choose open command window(or whatever it's called). Otherwise, open a command prompt and cd your way to your SDK tools directory.
4. Type "adb push gfree /data/local" and hit enter.
Optionally, you could dl the file to your phone use androzip or something like it to unzip the file and then use root explorer to move the file named gfree to /data/local. Not the gfree.h file. All the other files are source code inlcuded for the gnu license. This would skip the first 4 steps.
5. Now unplug your device from the computer.
6. Run visionary to gain temp root. (If you were already permarooted w/s=off ignore this step.)
7. Open terminal emulator on your device, type "su", and hit enter to gain root privileges.
8. Type "cd /data/local" and hit enter.
9. Now type "chmod 777 gfree" and hit enter to make the program executable.
10. Type "./gfree -f" and hit enter.
New features in gfree.
gfree usage:
gfree [-h|-?|--help] [-v|--version] [-s|--secu_flag on|off]
-h | -? | --help: display this message
-v | --version: display program version
-s | --secu_flag on|off: turn secu_flag on or off
-c | --cid <CID>: set the CID to the 8-char long CID
-S | --sim_unlock: remove the SIMLOCK
With the new features you can turn off one thing at a time. You can also turn security back on and set the CID back to stock if you wish. To turn simlock back on you still have to follow the revert procedures on this page as the information that is patched to turn the lock off is encrypted and we can't write back to it other than restoring the entire image.
So, if you wanted to leave simlock on but turn security off and set super CID the command would be "./gfree --secu_flag off --cid 11111111" + enter. The -f switch after ./gfree that is now in the above step (./gfree -f) just tells gfree to patch everything.
11. Wait for the program to finish and then reboot into HBoot to see if S=Off. Also, check your bootloader version. If it says s=off and has bootloader version 0.86.0000 it worked.
If you already had hboot 0.85.2007 you can check it through the hboot menu. It gives you an option for "system info" in the hboot menu. Highlight it and hit power. It should say CID = 11111111 or something like that. If it does your golden.
Congratulations!
12. If this is the first time you have rooted your device you will need to run visionary again (temproot w/set system r/w after root checked and then attempt permroot) to make root privileges permanent and then reboot again. Now "su" should work properly for you.
Gfree writes a backup of the file that it patches named Part7backup-numbers.bin on your sdcard. I suggest putting this file in a safe place as it is the only way to revert if you need to.
[Optional] Steps to flash engineering bootloader.
1. Restart your phone and plug it back into your computer.
2. Download this file: http://www.megaupload.com/?d=NN5726Z8
md5sum: df4fd77f44993eb05a4732210d2eddc6
3. Copy the file to your SDK tools directory.
4. Open a command prompt again and cd into your SDK tools directoty (platform-tools if your on the new R8 SDK).
5. Type "adb push hboot_dhd.nb0 /data/local" and hit enter.
6. Now open terminal on your device and type "su" and enter to gain root priviliges.
7. Type "cd /data/local" and enter.
8. Now type "dd if=hboot_dhd.nb0 of=/dev/block/mmcblk0p18" and hit enter.
9. You should see something like: 2048 bytes in 2048 bytes out 1048576 bytes copied blah blah blah.
10. Now restart the device into hboot and check if your bootloader version is 0.85.2007. That is what you want to see.
Congratulations, you now have a TRUE root and engineering bootloader on your shiny MT4G!!!
Click to expand...
Click to collapse
Sent from my HTC Glacier using XDA Premium App
ZuluNexus said:
Hey I ran into the same problem, with that 86.0000 boatloader u must use the gfree chmod777 process its because its after the ota update
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
I second this, gfree works great
ZuluNexus said:
Hey I ran into the same problem, with that 86.0000 boatloader u must use the gfree chmod777 process its because its after the ota update
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
This would explain why I had to flash the pre ota stock image before I could root using the sh root.sh.... I am sure the chmod777 would have worked also...
Sent from rooted Royal Glacier using XDA app
powduh09 said:
I can't see the pics you posted, but I had this issue myself, for me the answer was to find a stock recovery pre ota update and force it, then I ran visionary and terminal with sh root.sh or whatever... Hope this helps... Just try to find an image of pre ota stock rom and go from there... There is a good forum here with a walkthrough to do this... Post results please, would like to know if this was your issue...
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I see. So just get a pre ota stock rom and Visionary would be the simplest way then? But would the pre ota stock ROM also include the < 86.0000 botloader?
ZuluNexus said:
Hey I ran into the same problem, with that 86.0000 boatloader u must use the gfree chmod777 process its because its after the ota update
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
ZuluNexus said:
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
ziggy34 said:
I second this, gfree works great
Click to expand...
Click to collapse
Thumbs up
powduh09 said:
This would explain why I had to flash the pre ota stock image before I could root using the sh root.sh.... I am sure the chmod777 would have worked also...
Sent from rooted Royal Glacier using XDA app
Click to expand...
Click to collapse
Which method did you use to flash the pre ota image?
And thanks everyone for the quick replies!
When I flahed pre ota I found the forum on here for it. Just placed the file on my sd card and named it PD15IMG and booted phone to hboot, it found update and went from there
Sent from rooted Royal Glacier using XDA app
powduh09 said:
When I flahed pre ota I found the forum on here for it. Just placed the file on my sd card and named it PD15IMG and booted phone to hboot, it found update and went from there
Sent from rooted Royal Glacier using XDA app
Click to expand...
Click to collapse
Awesome, what is hoped for! Thanks!
Sent from my HTC Glacier using XDA App
EDIT!!
RESOLVED!
Unfortunately the method of just using the PD15IMG did not work because the bootloader recognized it as an older image and wouldn't update it. I came across this thread and successfully rooted!! =]
http://forum.xda-developers.com/showthread.php?t=995549
I improvised a bit and did not use "Androzip" I had "Adao File Manager" already installed on my friends phone. Basically.
Credit goes to the OP of the posts!! But here's the link to the gfree the OP is referring to. http://forum.xda-developers.com/showthread.php?t=858996
I am having a problem getting the gfree files to move where they need to be and sry guys, unsure of ow to use sdk, im need the dummy dummy guide anyone? Ive been researching for days lol
Rainbowbright081 said:
I am having a problem getting the gfree files to move where they need to be and sry guys, unsure of ow to use sdk, im need the dummy dummy guide anyone? Ive been researching for days lol
Click to expand...
Click to collapse
You need a root explorer.
*Root can be accomplished without SDK.
Sent from my Glacier running CM7 RC2 via XDA app.
YOu can try using mt4groot.zip google it
I managed to get it done right with adb, s=off perm, running cm7 with honeycomb. Quite awesome!
Sent from my HTC Glacier using XDA Premium App
lilazngoku8 said:
YOu can try using mt4groot.zip google it
Click to expand...
Click to collapse
It's in the second link I posted. Safer than Googling.
Rainbowbright081 said:
I managed to get it done right with adb, s=off perm, running cm7 with honeycomb. Quite awesome!
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Running CM7 with Honeycomb? I am mistaken? You mean the honeycomb theme?
Sent from my Glacier running CM7 RC2 via XDA app.
Sry yes running the honeycomb theme
Sent from my HTC Glacier using XDA Premium App
Rainbowbright081 said:
Sry yes running the honeycomb theme
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Lol cool, I was going to say, 3.0??!! ; )
gordonzhao said:
Awesome, what is hoped for! Thanks!
Sent from my HTC Glacier using XDA App
EDIT!!
RESOLVED!
Unfortunately the method of just using the PD15IMG did not work because the bootloader recognized it as an older image and wouldn't update it. I came across this thread and successfully rooted!! =]
http://forum.xda-developers.com/showthread.php?t=995549
I improvised a bit and did not use "Androzip" I had "Adao File Manager" already installed on my friends phone. Basically.
Credit goes to the OP of the posts!! But here's the link to the gfree the OP is referring to. http://forum.xda-developers.com/showthread.php?t=858996
Click to expand...
Click to collapse
This is just a laid out variant of the ./gfree method. It'll work but it's been around since the dawn of the Glacier. It's nothing special .
I have rom mgr premium installed and i have tried flashing from there although it says it has successfully when I get into bootloader its another story. I have tried terminal emulater, putting the pc36img.zip on my sd card and nothing seems to work. when in bootloader and it tries to install the pc36 zip it says wrong file or no image. I need some help here. Im running cm7.0.3.1 and it runs very smooth. But this recovery issue is on my last nerve! Help please......
OK, you just need a pc36img.zip recovery file. I say use Amon Ra.
Make sure it;s named PC36IMG.ZIP just like I wrote it.
Put it on the root of your SDCard, boot up, holding volume down and power button at the same time.
NOW it will find the pc36img file and flash your recovery.
It doesnt recognize the zip file! I have tried that several times and I keep getting the same response. No image or wrong image!!! I dont understand why!!!
Hey guy,,is your bootloader S-off?
Sent from my PC36100 using XDA Premium App
Yes.... S-off
Try this,,,place your PC36IMG,zip on root of SD,,not in any folders,,then see if it will flash in hboot,,make sure it is named exactly as stated,,if using a Windows pc,,leave off the ,zip ext,,
Sent from my PC36100 using XDA Premium App
root of sd?
I just want to be sure here.. I have root explorer on my phone. This is what I have been doing with the pc36img.zip file. I download from media fire with my phone, then I go into root explorer, click on SD card, download folder then I look for the zip I just downloaded. Then I copy the zip and paste it in a folder called root. Does that sound correct? Here is a screen shot(I hope)
Don't place in any folders,,,that's the mistake,,root explorer,download folder,copy pc36ing,hit back button 1 time,then paste,,boot into bootloader,hboot will find it,just follow onscreen instructions,,hope this helps,,
Sent from my PC36100 using XDA Premium App
I'm not seeing the boot folder??????
I see a folder called bootanims?? Is that it?
Dude, by ROOT FOLDER, that means not in ANY folders on your SDCard. Just put it on the card itself. The path needs to be /sdcard/PC36IMG.zip and the way I have it capitalized is how it MUST be.
Also, make sure with root explorer that it doesn't say PC36IMG.zip.zip
No,,go to the pc36img,,the one you downloaded,,copy,now hit back once,paste pc36img here,.now back out of root explorer,,,power phone off,,,hold volume down and hold power button till bootloader screen turns on,,it will find ing file and ask if you want to update,,volume up for yes,,let it flash,,then it will ask for reboot,,volume down for no,,press volume down 1 time,,then press power,,will now load into recovery
Sent from my PC36100 using XDA Premium App
Hipkat,,been trying to help him for hours now,,he's close to me,,about ready to see if he'll meet up and I'll to it for him,,
Sent from my PC36100 using XDA Premium App
Roldham,,,check your PM,,I sent you one,,
Sent from my PC36100 using XDA Premium App
Alright! I figured it out! I'm a bit of a noob but I definetly appreciate all the help. Thanks!
roldham71 said:
Alright! I figured it out! I'm a bit of a noob but I definetly appreciate all the help. Thanks!
Click to expand...
Click to collapse
No problem guy,,very glad you got it,,look in your messages,,
Sent from my PC36100 using XDA Premium App
any way to take screenshot of the screen?
not rooted, stock 4.5.91
Use the Android SDK.
whats that?
not sure if you need root but you can try screen grabber.
you can always look these things up with search or google.
http://forum.xda-developers.com/showthread.php?t=1009451
this works, thanks
smashcz said:
any way to take screenshot of the screen?
not rooted, stock 4.5.91
Click to expand...
Click to collapse
Get the Android SDK
Go to Start> accessories> cmd
In cmd go to the directory of your android-sdk folder(either by 'CDing' until you are wherever the folder is, or by clicking and dragging the folder into the prompt window)
when you are in the android-sdk folder, do cd tools> type 'ddms'
Make sure you have the latest version of Java
???
Profit
ScreenShot It app works on an unrooted Atrix but it is pricey.
AndroSS is free in the market and doesn't require root.
Sent from my MB860 using XDA Premium App
There is a thread on this forum an app was made specifically for the ATRIX by a member.
Works great.
Edit: there's a link up top lol my bad
Sent from my [email protected] Atrix - OC 1.1ghz
Hey xda I have sdk ver.12 also jre 6....but its not detecting my device this is my 4th time trying to use adb I have windows 7...what I wanna do is use fastboot to flash a cm7 splash screen..please help..thanx
sent from my rooted mt4g running cm7.0.3...u jealous?
Download a program called usbdeview. Open up the program (run as administrator) and delete all of the drivers associated with your phone. Make sure USB Debugging is turned on in your settings/applications and plug your phone back into your computer. This should download the drivers necessary to run ADB.
Just use this
http://forum.xda-developers.com/showthread.php?t=956434
Sent from my Google Nexus 12! yup I'm from the future
I would recommend setting up adb this way if you cant get it to work with Android SDK.
<<< http://forum.xda-developers.com/showthread.php?t=928370 >>>.
I couldnt get Android SDK to work on my win7 machine either. Wish my comp just came with xp or something, new OS are a pain to get things like this working on.
Thanks guys appreciate the help the like u provided @eqjunkie829 did the trick....thanx
sent from my rooted mt4g running cm7.0.3...u jealous?
I got it to work wit win7 u must follow everything wit out flaw
Sent from my HTC Glacier using XDA App
Only thing now is flashing a new splash screen anyone know the fastboot method?
sent from my rooted mt4g running cm7.0.3...u jealous?
Chuchave said:
Only thing now is flashing a new splash screen anyone know the fastboot method?
sent from my rooted mt4g running cm7.0.3...u jealous?
Click to expand...
Click to collapse
I have flashed a couple of splash screens through terminal emulator method and it seems to be very easy. Should be a link in resource bible.
Sent from my HTC Glacier using XDA Premium App
Thanx eqjunkie
sent from my rooted mt4g running cm7.0.3...u jealous?
@eqjunkie the method that I have adb set up in using the drewblue way there's no ask tools folder so how would I push a splash screen thru? I tried a terminal emulator way by typing first such to get # then dd if=/mnt/sdcard/custom.img of=/dev/block/mmcblk0p19 I also had the custom image the right size 480*800 that I converted to a image using ez splash screen flasher tool renamed it custom.img put it on the root of my sdcard but got a cannot open for read no such file or directory error....I just don't know what to do so im guessing fastboot is maybe my last option...
sent from my rooted mt4g running cm7.0.3...u jealous?
Chuchave said:
@eqjunkie the method that I have adb set up in using the drewblue way there's no ask tools folder so how would I push a splash screen thru? I tried a terminal emulator way by typing first such to get # then dd if=/mnt/sdcard/custom.img of=/dev/block/mmcblk0p19 I also had the custom image the right size 480*800 that I converted to a image using ez splash screen flasher tool renamed it custom.img put it on the root of my sdcard but got a cannot open for read no such file or directory error....I just don't know what to do so im guessing fastboot is maybe my last option...
sent from my rooted mt4g running cm7.0.3...u jealous?
Click to expand...
Click to collapse
Try using one of splash screens that are on this site already so you can tell if there is something wrong with the file that you are using or if you are missing a step. You can always replace it later once you know what the problem is. I'm thinking that if it's saying that there is no such file that may be the problem with the file. Did you unzip the file from the folder and put it on the root of the sdcard?
Sent from my HTC Glacier using XDA Premium App
Actually I created the image usin the ex splash Creator and the other one I got from somewhere else but I put it on the root of my memory card I don't know I could be missing followed the steps to the t....ill try again....and thanx
sent from my rooted mt4g running cm7.0.3...u jealous?
my phone has the 2.3.4 update, want to go back to 2.2.1 to root, i downloaded jdk , and sdk is not detecting java . i'm on windows 7 is that the reason? my phone was rooted before using z4root i think. the one click method, so this is a frustrating. if someone could help id appreciate it. thanks
dirtyreturn said:
my phone has the 2.3.4 update, want to go back to 2.2.1 to root, i downloaded jdk , and sdk is not detecting java . i'm on windows 7 is that the reason? my phone was rooted before using z4root i think. the one click method, so this is a frustrating. if someone could help id appreciate it. thanks
Click to expand...
Click to collapse
There is a post in development section under stickies on how to downgrade to froyo.
Sent from my HTC Glacier using XDA Premium App