Anyplace to track CM7 issues for glacier and other phones - myTouch 4G Q&A, Help & Troubleshooting

The official bug tracker for Cyanogen only lists up to version 6.1.2. It would be nice if there was a place where we could go that allowed us to search for open issues or problems by nightly build number, and phone platform.
Not necessarily a bug tracker for the devs to use since they have their own methodology, but something that end users could use to determine at what point they would take the plunge and install CM7.
Reading through hundreds of pages of posts and figuring out what is and isn't an issue is nearly impossible.
Thoughts?

dude....nightlies are for testing purposes only. no changelogs. no bug submissions. flash at your own risk. some of the problems are rom related some aren't. wait for an RC if you want something stable with a changelog.

I'm talking something unofficial. Reading through 300+ pages of forum posts to figure out if people are having good luck with a build is a huge PITA.
I'm fine with running nightlies, but I don't have the time to read for an hour+ every day to figure out whether or not it's worth upgrading to the newest nightly because something might work better, or if additional features were added. Or maybe some build just completely horks the phone...
I'll agree that it's all in one thread for the most part, but it's still extremely time-consuming to read through it all.
I guess even something as simple as:
- 3282 users like this build
- 234 users hate this build
-- 93% Positive
It would probably have to be split out by platform also.

signal15 said:
I'm talking something unofficial. Reading through 300+ pages of forum posts to figure out if people are having good luck with a build is a huge PITA.
I'm fine with running nightlies, but I don't have the time to read for an hour+ every day to figure out whether or not it's worth upgrading to the newest nightly because something might work better, or if additional features were added. Or maybe some build just completely horks the phone...
I'll agree that it's all in one thread for the most part, but it's still extremely time-consuming to read through it all.
I guess even something as simple as:
- 3282 users like this build
- 234 users hate this build
-- 93% Positive
It would probably have to be split out by platform also.
Click to expand...
Click to collapse
Its hard for a thread like this because it was likely be very inaccurate. For many reasons. Mainly because people are lazy and don't even read the FAQ that someone else put hard work into for these lazy people.... I mean that most problems can be fixed by a simple restart, and you still see idiots that post their problem in the CM7 thread, as if they are the first to encounter it, then they reboot and ALL FIXED! DERRRRRR! Anyways...back on topic... people like this would be misreporting issues with builds, and then you have multiple specific data and hardware that can cause an issue for one person but the exact same issue cannot be replicated on other devices. Problems, ETC cannot be pinned well enough to start a thread of the nature you are suggesting.

There are 300,000 new Android activations daily. If only 1% of those are MT4Gs, that is 3,000 new MT4Gs activated everyday. If only 10% of those people discover this forum, that is 300 people every day coming here.
Of those 300 new people coming to this forum every day, unfortunately, only 1% can actually search for anything at all. The other 297 post the same damned questions and complaints, over and over and over. And the next day, another 297 people who have never clicked a search button in their lives come here. And it starts again.
Drives me bonkers.

flashing cwm 3.0.0.5
I have an issue flashing to cwm 3.0 i located the file in zip and applied it but then when i go to all clockworkmod 2.5.1.4 it says an error occured while flashing my recovery what do i do i have tried flashin it through terminal and it says flash img not found i have tried several diffent forums my s=off so my phone is rooted someone please help me!!!!!!!

Perfect example. I note now that after hijacking this thread, ksw0080 did replicate the question in a new thread. But there are plenty of posts and threads on this issue ... for those who search.
Hint for ksw0080 -- if you like, you can try TrueBlue_Drew's current method. Click here.

ksw0080 said:
I have an issue flashing to cwm 3.0 i located the file in zip and applied it but then when i go to all clockworkmod 2.5.1.4 it says an error occured while flashing my recovery what do i do i have tried flashin it through terminal and it says flash img not found i have tried several diffent forums my s=off so my phone is rooted someone please help me!!!!!!!
Click to expand...
Click to collapse
Complete and utter fail.
Sent from my MT4G running Gingerbread

ksw0080 said:
I have an issue flashing to cwm 3.0 i located the file in zip and applied it but then when i go to all clockworkmod 2.5.1.4 it says an error occured while flashing my recovery what do i do i have tried flashin it through terminal and it says flash img not found i have tried several diffent forums my s=off so my phone is rooted someone please help me!!!!!!!
Click to expand...
Click to collapse
i couldnt tell if this was serious or a joke

ksw0080 said:
I have an issue flashing to cwm 3.0 i located the file in zip and applied it but then when i go to all clockworkmod 2.5.1.4 it says an error occured while flashing my recovery what do i do i have tried flashin it through terminal and it says flash img not found i have tried several diffent forums my s=off so my phone is rooted someone please help me!!!!!!!
Click to expand...
Click to collapse
If for some reason the method in my thread wont work for you please leave a post there and I can help you. If you havent tried the method in my thread then WTF?

It looks like ksw0080 has not checked in with the forum since Feb 8, when their question was posted twice. Either s/he managed to solve the problem with the guidance provided, or s/he no longer cares, or s/he has no internet access.

Related

I throw in the towel on flashing a ROM

Between problems with Clockwork recovery and being unable to read a ROM on my SD card (signature won't verify) has caused me to just stay rooted. If anyone has advice on how I can flash a rom with the above issues let me know.
Could I have screwed up unlocking nand protection?
It sounds like you should stick with the stock ROM.
If you simply follow the directions it isn't difficult.
twin001 said:
If you simply follow the directions it isn't difficult.
Click to expand...
Click to collapse
exactly, which is why "It sounds like you should stick with the stock ROM" will be the best for All of us.
jgarozzo said:
Between problems with Clockwork recovery and being unable to read a ROM on my SD card (signature won't verify) has caused me to just stay rooted. If anyone has advice on how I can flash a rom with the above issues let me know.
Could I have screwed up unlocking nand protection?
Click to expand...
Click to collapse
Why dont you flash stock RUU then follow toast root tutorial 1 and 2?
Your first problem was not using toast method and the more stable recovery. Second is giving up without trying them.
Unrevoked and clockwork are not as functional mostly because the clockwork recovery doesn't properly wipe or devices. This causes serious issues when you go to flash a new rom.
People use them because they are easy and are to lazy to read the thread so don't realize the issues. Then get frustrated when it doesn't work.
Are you rooted yet? If not, I used neckface's step by step method cuz I had problems setting up ADB. It takes a bit longer, but is very straight forward. I also used Amon Ra's recovery(really liked it on my G1) Once you're rooted flashing is easy. Just make sure whatever rom you use to READ all the instructions. Also, make sure your sd card isn't corrupt and that the roms are on the root of your card. Hope this helps, there are alot of benefits to full root and using the great roms they have out for our phones.
I did root toasts method
jgarozzo said:
I did root toasts method
Click to expand...
Click to collapse
Where are you now, i mean only root with no custom recovery?
jgarozzo said:
I did root toasts method
Click to expand...
Click to collapse
Clockwork recovery isn't used with toasts method, it is a modified Amon Ra recovery. If you are rooted, I would go do toasts part 2 again. at the end you will flash the recovery and shouldn't have any problems, make sure you wipe data, davlik cache and cache with that recovery before flashing a new ROM.
Edit: Ok, when I downloaded the files from toasts method 2 wasn't clockworkmod recovery. Thought I better caveat that just in case something changed in the last couple weeks.
jgarozzo said:
Between problems with Clockwork recovery and being unable to read a ROM on my SD card (signature won't verify) has caused me to just stay rooted. If anyone has advice on how I can flash a rom with the above issues let me know.
Could I have screwed up unlocking nand protection?
Click to expand...
Click to collapse
Have you tried formating your sd card i was having problems with my phone not reading the roms on my sd card and formated it and haven't had the problem since.
brandenk said:
It sounds like you should stick with the stock ROM.
Click to expand...
Click to collapse
yeah, i have to agree.. ive unlocked my windows mobile phones but never rooted until i got my evo.. i was a little nervous but the tutorials are very nice and easily explained.. just followed each step one after another without rushing until everything was good to go.. i have no interest in trying out froyo since a few things arent working at the moment but in actuality you wont have any problems if you are just patient.. i only use fresh roms because ive learned thats the rom of my choice, ive tried others but always went back to fresh so basically im just sticking to whatever flipz releases.. most ppl that indupt having issues are those that rushed the latest ota after it is constantly said to just wait for the devs to add it to their roms.. just be patient and follow the directions slowly and you should be good! and dont give up, when you get stuck you can always come to the forums.. ohh and instead of just creating a new thread of the same questions over and over and over again just start reading around because you will read someone having issues that you havent come across yet and when you actually do run into those problems you will already know how to fix them.. heres a fine example to unroot just load the stock RUU, that questions has been asked over and over again yet ppl that like to be spoonfed just create a new topic instead of using the search button.. i wasnt even sure how to unroot until i read the first topic that was created and since then lazy ppl keep asking that question instead of reading.. ppl are hear to help at xda, but it doesnt get annoying helping those that are just plain out lazy! dont give up bro.. just keep reading, we were all newbies at one time
now as to the reason why i quoted.. if your planning on just giving up when you have issues then sticking to stock is really just the best thing to prevent you from getting frustrated
lol, wow I just saw your two other threads you started. If you are having problems, really, just start back from the beginning and start over. Maybe you forgot to wipe, or as someone else mentioned try formatting your sd card, etc.
starting from scratch and I can't get it to read the pc36img.zip file to root
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=715915
Did you do the last update?
agreed. start over and do the Toast1 and Toast2 then install RaAmon. I personally like Flipz ROMs. i followed the steps provide to flash the FreshROM and all went well.
move slowly. if something fails, come back and RTFM before you move on blindly.
good luck.
for more help, i'd suggest you include some amount of detail. most folks out here are looking for help/advice. think of it this way...when you go to the doctor or dentist what do they need to know? what/where/when/how/etc ... you don't ONLY say "doc, i'm broke". you say what is wrong/what did you do, where it hurts, when did it work last, how did you get to this point, etc.
in the same way, if you simply say "i can't make it work"...well, we don't really care. but if you say, "i'm stuck at this point. i tried yadayadayada", then the nerds in this community will be unable to prevent themselves from chiming in. it's part of a nerds personality.
if you have read the documentation and followed it, you should have an idea as to which step failed. let's start there.
starting from scratch
I power off and power on and looks ready to read the PCIMG36.zip (goes 4 lines down) and then nothing. It wont read the file. I have tried a variety of pc36img.zip files and a variety of microSD cards, same result, it doesn't read and the progress bar doesn't show.
re:
I'm going to have to agree with you! I am no programmer or hacker but can follow direction and I have tried many of the different way to root my phone so I could tether it and they are all incomplete, missing some part of the equasion. I was able to tether my instintHD in like 5 mins and I have been messing with this for hours.
Start from scratch and use the simple root app. I would also refrain feom doing nand unlocking as I had problems where I would actually lose privilages with that.
Sent from my Evo 4G using XDA App
jgarozzo said:
Between problems with Clockwork recovery and being unable to read a ROM on my SD card (signature won't verify) has caused me to just stay rooted. If anyone has advice on how I can flash a rom with the above issues let me know.
Could I have screwed up unlocking nand protection?
Click to expand...
Click to collapse
Stick with stock

I just got my Fascinate today. 9/29/10

I want to root it and deodex it.
What is the easiest way to go about it.
I read his thread but it says you have to be rooted for it to work.
But i dunno what my OTA or what ever is im just being apprehensive cause i don't wanna go in gung ho and **** it all up!
Thanks guys
First start with the thread Root, Recovery, and Update. Follow the first section called "Note 1" to root and flash clockwork recovery. Then you can follow the steps to flash the Deodexed system. Make sure you make a backup of your system before you try to load the deodex just in case.
Yeah... definitely do your reading before you start cluttering the forums with these silly posts. If you read the Sticky Thread at the top you would not be having these questions. Call me an ass, call me whatever... but if people would just read everything would be so much better.
I did read that thread. it hasnt been updated in like 3 weeks so i didnt want to do something out dated, As i said i didnt know what OTA that would be great if there was a sticky for lingo too. But Im sorry im cluttering your precious little forums bro. Hope you can sleep at night knowing that will be not packed with posts about people looking for advice without people being condescending assholes.
The thread hasn't been updated because Theirs no updates simply everything in the root thread is confirmed and working just follow instructions very carefully and you shouldn't run into problems. But as you know it if "You" screw up then you might can get bricked.
I just followed the One click root method like 5 mins very easy then Clockwork recovery was easy trust me not hard.
Seriously.
I feel that if the first five posts on the forum were just stickied copies of the LOOK HERE FIRST thread, people would still be making these waste-of-space posts.
Human nature, I guess.
I'm happy you got your phone and I share your excitement over it, but I don't really care that you have it, and I don't need to know that, either.
After you're all Deodex'ed, Rooted, and Backed-up, just wait around and lurk like the rest of us until somebody makes something for us.
and btw i learned all of the lingo by typing things i didn't understand into google.
Very well put... lmfao at people getting all butt hurt. Come on mods, delete the thread.
When i run the root with the 1 click method after it says exploiting my phone its going to force the files on it says error: phone not phone. it retries about 5 more times and then it just ends.
Any help?
When you ran the Odin did you click Phone or PDA your suppose to click pda and select the files.. you shouldnt mess up anything if you just read carefully so simple.
I havent got to odin yet. After It restarts my phone and tells me to unlock it it says it should take 3 minutes to finish. It says it error: cannot find phone. this happens when it is trying to put thr.files on the phone.
^^ The same thing happened to me until I downloaded different drivers than what was posted in the one click thread. Google "Samsung Fascinate drivers" and click on the link through Verizon.
I couldn't tell you why the ones in the thread didn't work, but I guess sometimes that's the way it is... Also, the less you have running on your PC the better. I made a different login just for hacking/cell phone stuff that doesn't have much of anything running on startup.

Does ANYONE know of a fix for this yet????

I have a new streak on the 6601 build and am following the steps to move to 4399, 8105, and hopefully get to here. However, i have hit a major roadblock. When I try to flash to 4399 everything goes smoothly until the progress bar gets half way and then tells me my "Software is up to date: Rebooting in 30 seconds"
I am not new to flashing and was putting a new rom on the captivate every other day, so I'd like to think I'm good at following directions and reading the forums for help. I have found several other threads from the past months with the same problem, but no one ever posted a fix!!! I've tried every combo I can thing of, flashed different recovery's, tried skipping 4399 all together, tried using clockwork and changed the .pkg to a zip file. I've never had such a hard time getting past one thing while flashing. I'm hoping I'm just missing something really obvious and it's an easy fix, but can someone please help me!! I have read and re-read the directions and can't find anything I am missing
have you tried the official 2.2 romfiles at modaco ? flash from a pc .
http://android.modaco.com/content/dell-streak-streak-modaco-com/323561/official-2-2-froyo-untouched/
Yeah I was going to but several posts say they are stuck at dell logo when trying to go straight to 2.2 from 1.6. I appreciate the idea though! I still may try it in a bit. Any other thoughts?
topshelf95 said:
Yeah I was going to but several posts say they are stuck at dell logo when trying to go straight to 2.2 from 1.6. I appreciate the idea though! I still may try it in a bit. Any other thoughts?
Click to expand...
Click to collapse
you also need a modified loader (like clockwork) and root http://forum.xda-developers.com/showthread.php?t=747598 to be able to flash rom files

Froyo Update Won't Install

I have the Samsung Fascinate and I recently rooted it to get all the wonderful benefits that come with rooting.
I downloaded the leaked Froyo update, renamed it "update.zip" and put it in my sd card folder in order to update.
I then turned off my phone and pushed the power button plus the volume up and down until I got to the boot screen. I kept getting an error saying it couldn't verify the package (or something along those lines) and then it sent me to a screen with the triangle, exclamation point and the little droid guy.
I also tried using Rom Manager but the same thing happened.
I hear you are supposed to use Odin, but I am running on a mac and Odin is a windows application.
Please help me, I'm desperate to get the Froyo update on my device.
Thanks in advance.
Yikes u didn't do any research at all did you?? U can't use Odin on Mac....and u need it. Do u even have cwm? Probably not since u didn't Odin. U need to Odin cwm...Make a backup...Odin eb01 modem...flash rom. Update.zip is not correct...u don't rename .zip roms...you flash them via cwm. Not trying to bash u....but you are way off...and getting help via forums will b tough.
You need to go to irc and be polite and find some help there. Someone should hopefully be able to help you...I will b on eventually.
sent from my vanilla voodoo fascinate
I did my research but if I'm not literate with how or what a CWM is or how to use it, that doesn't mean I didn't do my research.
But are you telling me I can't install the update without a windows computer?
I have access to one where I am but I would rather know all the steps before I get on someone else's computer and start trying to figure it out there.
I looked through all 50 or so pages of the Froyo leaked thread and I saw a few people who understood all these things, but if I don't understand and there isn't a tutorial it makes it harder for me to accomplish my goal.
Can your phone boot up?
Someone varify my directions.
This might work if u can get into download mode. U need to find all the links urself since I'm on tapatalk.
First off...find a pc. Without one you can't do anything. Put ur eb01 rom on sdcard for later. Instal the 32 bit or 64 bit Samsung drivers depending on ur pc. For many..its the 32 bit. Then get Odin. U will need to find a link to cwm...if I'm not mistaking there is one on like the 2nd or 3rd page in android development section...will say updated cwmq for dj05 or dl09 or something like that. Find directions of how to use Odin...but simply place the cwm.tar file in the pda section on Odin...then click start. When that's done...u should make a backup...however...u may not b able to boot up because of what u have already done. U may try odining the eb01 modem. Once u have that done...hold up down and power to get I to your new updated cwm. From there click instal zip from sdcard...and flash ur eb01 rom of choice....wipe wipe wipe...reboot system.
Again...this may not work since I'm not possitive what u already did to ur phone by not doing your research. Like I already said...be polite and head over to irc. .someone will have more time than I do to fix ur phone.
sent from my vanilla voodoo fascinate
You obviously didn't research. There is an eb01 walkthrough on fascinate development section...impossible to miss. If ur incompetent at following step by step directions u should not be Modding your phone. Seek help and knowledge before doing anything...u don't want a 600 dollar paper clip do you?
sent from my vanilla voodoo fascinate
kyfredrickson said:
You obviously didn't research. There is an eb01 walkthrough on fascinate development section...impossible to miss. If ur incompetent at following step by step directions u should not be Modding your phone. Seek help and knowledge before doing anything...u don't want a 600 dollar paper clip do you?
sent from my vanilla voodoo fascinate
Click to expand...
Click to collapse
How would you use it as a paper clip? A paper weight I see, but not a paper clip?!?!
TheFake said:
I did my research but if I'm not literate with how or what a CWM is or how to use it, that doesn't mean I didn't do my research.
But are you telling me I can't install the update without a windows computer?
I have access to one where I am but I would rather know all the steps before I get on someone else's computer and start trying to figure it out there.
I looked through all 50 or so pages of the Froyo leaked thread and I saw a few people who understood all these things, but if I don't understand and there isn't a tutorial it makes it harder for me to accomplish my goal.
Click to expand...
Click to collapse
Not to be a ****...but the first thing you learn when reading is how to flash the modem using ODIN...so, yeah....
Since you've f'd up the phone already. Download the restore to stock files and odin. Go to someone with a PC and follow the restore directions to the T. DO NOT FALTER.
kyfredrickson said:
You obviously didn't research. There is an eb01 walkthrough on fascinate development section...impossible to miss. If ur incompetent at following step by step directions u should not be Modding your phone. Seek help and knowledge before doing anything...u don't want a 600 dollar paper clip do you?
sent from my vanilla voodoo fascinate
Click to expand...
Click to collapse
No, but I also don't see the need for the disrespectful way you are treating someone looking for help.
Not everyone out there is as "smart" as you may be with modding but that's what this forum is for. Questions and answers, not smartass replies that don't help at all.
I appreciate the other posters response because at least he gave me information with no attitude. If you want to help someone, help them, don't demean them and offer a little advice.
jenisiz said:
Not to be a ****...but the first thing you learn when reading is how to flash the modem using ODIN...so, yeah....
Since you've f'd up the phone already. Download the restore to stock files and odin. Go to someone with a PC and follow the restore directions to the T. DO NOT FALTER.
Click to expand...
Click to collapse
The phone is working fine, if not better than before.
TheFake said:
The phone is working fine, if not better than before.
Click to expand...
Click to collapse
Honestly, you haven't done anything to your phone yet, so it shouldn't be running any differently than it was before.
There is a way to push CWM using ADB and Terminal on a Mac, but you would still need Odin to flash the modem, so might as well do everything that way. Download this Odin package from Android Central, and flash that using the PDA box in Odin. After that, you can flash a different 2.2 ROM or theme if you like
The only thing I am having trouble with is how to "flash" something.
TheFake said:
The only thing I am having trouble with is how to "flash" something.
Click to expand...
Click to collapse
Go to the Eb01 modem thread and read it. They will tell you how to "flash". You download the modem, plug in your phone, select PDA in ODIN and hit write or whatever...
It's as easy as reading and searching,
http://forum.xda-developers.com/showthread.php?t=948679
Not searching for things will get you flamed, ignored and banned (If not reading the rules). The reason I suggested you flash back to complete stock is because until you know what flashing is, difference between a ROM and a Radio...you are in dangerous territory of bricking your phone.
Guys, I'm also new to this flashing thing, but I've used Odin before and have read all the steps in the EB01 thread. My question is: can I install EB01 on top of stock, unmodded EA28 (which is the latest Eclair from Verizon) without wiping my data? All sets of instructions I've read include wiping, wiping, wiping... But since the new ROM is supposedly signed with the same Samsung/Verizon key as my current ROM, why shouldn't I be able to just install it on top, without wiping my data?
Or is it that because the guy who posted the ROM actually modified it, it's no longer signed with the Samsung or Verizon key?
I searched, but didn't find. I think the answer to this may be relevant to the original poster of this thread too, that's why I'm posting here.
thetodor said:
Guys, I'm also new to this flashing thing, but I've used Odin before and have read all the steps in the EB01 thread. My question is: can I install EB01 on top of stock, unmodded EA28 (which is the latest Eclair from Verizon) without wiping my data? All sets of instructions I've read include wiping, wiping, wiping... But since the new ROM is supposedly signed with the same Samsung/Verizon key as my current ROM, why shouldn't I be able to just install it on top, without wiping my data?
Or is it that because the guy who posted the ROM actually modified it, it's no longer signed with the Samsung or Verizon key?
I searched, but didn't find. I think the answer to this may be relevant to the original poster of this thread too, that's why I'm posting here.
Click to expand...
Click to collapse
It's always recommended to wipe. Those that don't are typically those who end up complaining about bad battery life, force close loops and utter suckageness...now flashing let's say super clean 2.0 to 2.2...that's fine bypassing the wipe, but imho that's the only exception.
thetodor said:
Guys, I'm also new to this flashing thing, but I've used Odin before and have read all the steps in the EB01 thread. My question is: can I install EB01 on top of stock, unmodded EA28 (which is the latest Eclair from Verizon) without wiping my data? All sets of instructions I've read include wiping, wiping, wiping... But since the new ROM is supposedly signed with the same Samsung/Verizon key as my current ROM, why shouldn't I be able to just install it on top, without wiping my data?
Or is it that because the guy who posted the ROM actually modified it, it's no longer signed with the Samsung or Verizon key?
I searched, but didn't find. I think the answer to this may be relevant to the original poster of this thread too, that's why I'm posting here.
Click to expand...
Click to collapse
You can install without wiping (saying from experience) as long as you dont mind problems later. I had plenty of force close problems and widget problems when I didnt wipe data.
Most ROM here are modified, to help protect the person who leaked it.
Interesting. Do we know the cause of those problems? How come no such problems exist when you update OTA with a similar official build?
I'm a developer and it seems weird to me that if you're starting with a stock ROM and upgrading to another stock ROM, apps will have issues. Or are the issues due to the fact that the newer ROM is still buggy (and that's probably why they haven't officially released it yet)?
Also, it doesn't hurt to try, right? And if I do get problems, THEN I can just do a simple wipe and start off clean. But if I don't have huge problems, I don't have to go through the trouble of restoring all my apps and settings, logging into everything again, etc.
it's not hard to restore apps/data, use titanium backup.
go ahead and try it without wiping, just do a full nandroid backup first. then if it sucks or you get funny errors you can revert really easily. I'd wipe with a major change like this, but if you're determined to try it there's really no big downside. just back up!
I ran EB01 over the weekend, didn't like a couple of things and was back up and running on DL09 in no time when I decided to switch back.
Its recommended to wipe but I've seen it a lot where u OK not wiping... u can try without and it u get bootloop just do a wipe. Like posted...titanium backup is ur bff when I mod.
Also about the post about me being rude.. I gave u the info u need...just telling you to research. U said u did, and I pointed out u didn't. If your not going to take the time to learn what ur doing...then expect help ASAP...expect ppl to b a bit rude. Ppl are welcome to help...but if u do something dumb without research...expect people to tell you.
Glad u got it working ok
sent from my vanilla voodoo fascinate
Just FYI everyone, I was able to to install Froyo without wiping and everything works fine. (except that my home screen shortcuts and maybe even some of my settings got reset... which was one of the things I was trying to avoid... but whatever.). The only issue I've run into so far is that Google Maps hangs for many seconds every once in a while. But I reset its internal cache and it's better now. All other apps are working fine.
umm "TheFake" is obviously a troll
nobody is that stupid, and his screen name gives it away

What LS997-compatible ROM contains *all* working LG Stock Apps?

So the whole reason I rooted this damn phone was to be able to install working stock apps. Not just the Music and Gallery apps either--ALL THE LG APPS. Which LS997-compatible 100%-working ROM can I flash and get them all, if any? I keep hearing one exists, but no one bothers sharing that info and when I search I find nothing.
Really? No one?
bgibson72 said:
Really? No one?
Click to expand...
Click to collapse
Look in the development section it's like the 5th one down has ls997 in the title
@bgibson72
Im the only person developing a STOCK LS997 rom currently.. It contains the LG base apps and all the removed ones that we didnt get shipped with out model . Includes a ton of extras as well, alternatively we have 3 or 4 aosp roms you can use, but make sure you use twrp and backup your efs before flashing as it tends to jumble your programming up and cause issues. Otherwise you can flash the stock rom the Dev who provided the dirty santa unlock method.
Theres a good bit of info here to locate everything you need to have a awesome experience with the LG V20!
My link
https://forum.xda-developers.com/v20/development/rom-ls997-stock-debloated-su-goodies-t3531923
READ THE ENTIRE FIRST 3 POSTS!!! A LOT OF TIME WENT INTO THIS TO CLEAR UP ANY CONFUSION!
I also itemized a list of 15 or so mods and add-ons that we can use to increase our enjoyment with perspective links to their home locations and the devs that built and maintain them.
jerrycoffman45 said:
Look in the development section it's like the 5th one down has ls997 in the title
Click to expand...
Click to collapse
This one?
{ROMS}[LS997] Stock-ish Magisk+3minit+ModControl 3/10/17
Other than DirtySanta, this is the only other one with LS997 in the title on that page. I'll give it a shot, and thanks for answering.
Team DevDigitel said:
@bgibson72
Im the only person developing a STOCK LS997 rom currently.. It contains the LG base apps and all the removed ones that we didnt get shipped with out model . Includes a ton of extras as well, alternatively we have 3 or 4 aosp roms you can use, but make sure you use twrp and backup your efs before flashing as it tends to jumble your programming up and cause issues. Otherwise you can flash the stock rom the Dev who provided the dirty santa unlock method.
Theres a good bit of info here to locate everything you need to have a awesome experience with the LG V20!
My link
https://forum.xda-developers.com/v20/development/rom-ls997-stock-debloated-su-goodies-t3531923
READ THE ENTIRE FIRST 3 POSTS!!! A LOT OF TIME WENT INTO THIS TO CLEAR UP ANY CONFUSION!
I also itemized a list of 15 or so mods and add-ons that we can use to increase our enjoyment with perspective links to their home locations and the devs that built and maintain them.
Click to expand...
Click to collapse
Hey thanks--I was fairly sure this was the ROM in question. Thank you for providing this! I was hesitant to flash because I'm always a little skeptical about the amount of help I'll get should I get stuck. I'm not exactly a noob at this, but I have plenty to learn. It looks like you've done a lot of work to provide a positive experience, so I'll give it a shot and see how it goes. I promise to read and re-read the instructions on the first 3 posts, and to NOT bother you with questions that have already been addressed in the thread. . Thanks!!
bgibson72 said:
Hey thanks--I was fairly sure this was the ROM in question. Thank you for providing this! I was hesitant to flash because I'm always a little skeptical about the amount of help I'll get should I get stuck. I'm not exactly a noob at this, but I have plenty to learn. It looks like you've done a lot of work to provide a positive experience, so I'll give it a shot and see how it goes. I promise to read and re-read the instructions on the first 3 posts, and to NOT bother you with questions that have already been addressed in the thread. . Thanks!!
Click to expand...
Click to collapse
if you made it through dirty santa the rest should be cake. 99% of the issues i covered for people were
after going to AOSP and not having a backup of their programing info in their efs and having to find a way to
manually go in and fix each fd up piece.
The other is being on older software and downloading a OTA and rebooting with it in your internal storage.
This one causes a endless boot loop into twrp, so be advised to delete the update if your on older software or be prepared to
hit my post # 3 for fixes and be near a pc as you need to fastboot erase the fota and misc directories to resolve the boot loop. A twrp wipe will not fix it and restores etc wont either lol.
Otherwise theres now a lil over 100 pages of chatting and troubleshooting, fixes and things that have gone on, and mostly its all outdated as ive provided the fixes for 99% of everything in the latest version 7.5
Just be prepared to take 15-20 minutes for the phone to boot up the 1st time. My rom is deodexed, and the 1st boot is doing 298 things before you get to the optimization part. There is not boot animations as the phone will always have the static screen issue on reboots so i went ahead a placed a disabled command there to just save time/batt life. The setup wizard is stripped and only there to give you the notice its done booting and time to get to playing around.
Magisk is kinda finicy being its systemless design. It takes some time to get used to it, and be aware that some older apps that dont support exotic root or systemless root may not request root and not fully work. Titanium backup is one i know is getting attacked by googles app scanning and needs to have that turned off before it will work, most of my apps have a option to set "force root" so it asks for a root request regardless if it understands MagiskSu's root methods.
just some food for thought. Hope everything goes well, and there is a ton of people on the forum here that have great knowlege and can help with troubleshooting issues you may have
Team DevDigitel said:
if you made it through dirty santa the rest should be cake. 99% of the issues i covered for people were
after going to AOSP and not having a backup of their programing info in their efs and having to find a way to
manually go in and fix each fd up piece.
Click to expand...
Click to collapse
Yeah, I didn't have many problems there, although I did get stuck in the TWRP loop once.
The other is being on older software and downloading a OTA and rebooting with it in your internal storage.
This one causes a endless boot loop into twrp, so be advised to delete the update if your on older software or be prepared to
hit my post # 3 for fixes and be near a pc as you need to fastboot erase the fota and misc directories to resolve the boot loop. A twrp wipe will not fix it and restores etc wont either lol.
Click to expand...
Click to collapse
I am on the ZV3 version of the software. I do have the ZV5 update in my cache folder--are you saying it's a good idea to delete the update.zip file?
Otherwise theres now a lil over 100 pages of chatting and troubleshooting, fixes and things that have gone on, and mostly its all outdated as ive provided the fixes for 99% of everything in the latest version 7.5
Click to expand...
Click to collapse
That's what I like to hear! :good:
Just be prepared to take 15-20 minutes for the phone to boot up the 1st time. My rom is deodexed, and the 1st boot is doing 298 things before you get to the optimization part. There is not boot animations as the phone will always have the static screen issue on reboots so i went ahead a placed a disabled command there to just save time/batt life. The setup wizard is stripped and only there to give you the notice its done booting and time to get to playing around.
Click to expand...
Click to collapse
Appreciate the heads up. Familiar with the long boot process from DS, lol.
Magisk is kinda finicy being its systemless design. It takes some time to get used to it, and be aware that some older apps that dont support exotic root or systemless root may not request root and not fully work. Titanium backup is one i know is getting attacked by googles app scanning and needs to have that turned off before it will work, most of my apps have a option to set "force root" so it asks for a root request regardless if it understands MagiskSu's root methods.
Click to expand...
Click to collapse
Magisk is a new animal for me, as I've had zero experience with it. I do have Titanium Backup installed, so I'll make a mental note on that.
just some food for thought. Hope everything goes well, and there is a ton of people on the forum here that have great knowlege and can help with troubleshooting issues you may have
Click to expand...
Click to collapse
Thanks again--I appreciate your hard work and dedication to this!
bgibson72 said:
Yeah, I didn't have many problems there, although I did get stuck in the TWRP loop once.
I am on the ZV3 version of the software. I do have the ZV5 update in my cache folder--are you saying it's a good idea to delete the update.zip file?
YES, dont boot into twrp until you remove it, or its back into the twrp loop you go hehe
Click to expand...
Click to collapse
Team DevDigitel said:
bgibson72 said:
Yeah, I didn't have many problems there, although I did get stuck in the TWRP loop once.
I am on the ZV3 version of the software. I do have the ZV5 update in my cache folder--are you saying it's a good idea to delete the update.zip file?
YES, dont boot into twrp until you remove it, or its back into the twrp loop you go hehe
Click to expand...
Click to collapse
Weeeeeeeeeeeeee!!!
Will do!
Click to expand...
Click to collapse

Categories

Resources