hello everyone, I need help. I flashed my phone and now when starting up, I can't use the touch screen anymore plus I couldn't hold the home+menu+volume down+power anymore (power up normally) also it asks for my network lock key. I live in. Can anyone help to restore the phone. thanks you so much
A time, I uninstalled a file in /system and ocurred me the same problem, try to install the ROM one more time! if the problem ocurred newly, you should install another ROM!
Related
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
manuel80 said:
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
Click to expand...
Click to collapse
Try flashing. Look at the link in my sig.
Its nothing big
The same happened to me. I then searched the net and found this wonderful site. I flashed the original rom, then got bolder and started flashing froyo roms and am now happily flashing custom roms ! I can say I enjoy my phone more now!!. Flash your phone too!!
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
manuel80 said:
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
Click to expand...
Click to collapse
You can try to factory reset it... Follow the following
Press Vol Up + Vol Down Key (Press in middle so that both are pressed)
Press Home Key
Now Press Power
GT I5801 logo will appear
Leave the keys and your phone will boot into recovery
Try wiping cache first and if not working factory reset it
If after this it doesnt work, Install Kies...It will install drivers
Follow the above steps except press vol down key instead of both
Phone will go into download mode.... Plug in USB and flash it
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Just flash your phone with new rom. For this use Odin and OPS file and rom .
Boot into download mode of gt-5800 by using vol - , power and home button all at a time. Then you can flash new firmware from Odin , use one package or other option specific to rom and your phone will start working again. Hope this helps.
Post any problem while flashing.
manuel80 said:
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Click to expand...
Click to collapse
Did the phone hung during upgrade process or Kies hung during download process?
If phone hung during upgrade process and now you cannot boot that means your phone is hard bricked. This is because when you upgrade the phone through kies, it updates the boot loader and when phone hung during the process means bootloader is corrupted. In this scenario, you need to take the phone to service center and get hardware replaced
then I guess I'll have to bring your cell phone service ... damn ..
Grazzi guys for the help anyway .. I just know you know the developments of the case ..
hello
have you ever tried anything like flashing before? if not take it to samsung service centre and say it is not switching on.
Hi there,
I have some problems with my blade. I tried to install one app, it was instaling for several minutes, and I turned it of...When I tried to turn on, it couldnt boot. When I press home+volume up+power on it boot me into recovery and I dont know what to do next. Which button I need to use to confirm any action in recovery? My blade is UNROOTED, with original 2.2. I saw many threads here about that, I read it all, but still dont know what to do...
Anyone please ?
Try Hard Reset Option
This might help:
http://www.hardreset.eu/zte_blade_hard_reset_soft_reset_en.html
Hello XDA (I'm new here)!
I'm having a very difficult problem (For me atleast), but i will begin at the start:
When i bought my LG, my proximity sensor was corrupt. Every call i started, my phone immeadietly locked the screen.
So a few weeks ago, I flashed the KDZ from homero (P700 V10K+Root+CWM etc..). After that I was able to flash CM10 to my phone.
But this is where the problem starts, I wanted to fix the proximity sensor bug, so i added the following line to my build.prop:
"gsm.proximity.enable=false".
I did it like this:
adb pull /system/build.prop C:/ *Pulled my build.prop*
adb root *made sure i was having root access*
adb remount *to access the /system/*
adb push C:/build.prop /system/ *and it succesfully copied*
adb pull /system/build.prop C:/test.prop *to check if everything changed succesfully*
Then i rebooted my phone, and now it's bricked(Can't boot CWM, Can't boot CM10, can only boot to Emergency Mode, no ADB). Because it was such a small change, I don't have any backups, which is really frustrating. I have very, very important data on my phone, so I need to recover some files.
Does anybody have a solution to this problem? Please don't suggest anything related to ADB, cause even ADB won't find the device.
Thanks so much for reading, hope you understand my problem and want to help me.
(I'm sorry for my very bad English)
EDIT:
The solution:
- First of all remove your battery,
- Then press and hold the vol- key + power
- When the lights turn on, press the menu key.
- Release the power key when your lg vibrates
- Your in CWM
- Use a custom update script, there are plenty out there, to push your original build.prop.
- Reboot & everything's fine.:victory:
Just tried to use the (Homero v10k) KDZ, but when i use the KDZ_Updater, will i lose my data ? (When going from cm10 > v10k?).
KDZ_Updater crashes, but if anybody knows, I can try again.
Please help me, I really need some data on there.
Got KDZ_Updater to work, currently it's busy... I will edit this post, if it's back alive again, hopefully it will help other people with the same problem
EDIT:
Okaayy... KDZ Updater finished, phone still dead. It stays about an hour at the LG Logo (The animated one, so it's booting Android), can't manage to get to CWM.
Is it possible something in Homero's KDZ isn't right? I try to boot into CWM using the vol-+ buttons and the power button. After LG logo, i release the power button, still no result...
Could anybody, please, please help me? I can't live a day without my phone... (I don't care about the data anymore, almost everybody knows it, so it's alright... )
Hello i have ZTE device is of my friend he give me the phone because my screen broken, after few days of using the phone he stuck at the boot when u turn him on
its stuck on the screen of my cellular company [Partner] i have no idea whats the name of phone just the model and i dont found any help for this phone every place say its diffrent phone
"san francisco", "blade 2". so i try to get into recovery without success "Volume UP + Home Button + Power Key" i try also without "Home Button", and its not working i want to wipe the phone and maybe fix the boot problem. but i can get in into the "FTM MODE" like the "download mode" in Galaxy but i didnt found any PC program like "Odin" "Kies" to try flash any rom or fix this problem, i just want that the phone be working. to get it back to my friend.
PLEASE PLEASE HELP ME!
I Cant upload photo because i'm still new user
This is the model: P736V
Hi from Lithuania!
please help someone
short story - i tried to flash recovery image via asus flash tool and when it stuck. now i havent any droid at begining no recovery option, and when it powers up touch screen dont work.
long story- 1. my friend ask to remove password from zenpad,his children add it. password with program app lock or something.
2. i tried to do hard reset but i didnt find the combination (it was very strange) only three options comes with vol down and pow. nothing comes with vol up.
3. i decide to flash it to stock firmware, download stock img drivers and etc.
4. i used asus flash tool, and it stucks at the moment, and now i cannot flash it anymore. the symptoms are-
nothing comes when power up(only light)
when its power on touch screen not working,but still see the locked app and all concent.also cannot turn it off (need mouse to turn it off)
how i can get out of this situation? how to fix it ? please help guys, i dont have any minds now, searched info for 1 week, but maybe bad.
Greetings from Lithuania
the biggest question how to get the device to bootloader? i cannot to it by buttons