Hello...
I have a SD-bootable Android on a Dutty Windows ROM 6.5 with a working radio and HSPL 2.08. All perfectly working.
Now i want to go NAND and want to install MAGLDR. I start it as administrator, then i can select update and my phone goes straight from windows to bootloader. But after that i get the message that my workstation can't connect to my phone (althought boot loader says "USB"). I tried it directly from boot loader too and that too doesn't work (from there i can't even get the Update selection).
Could there be an issue with the Dutty ROM or has anyone else an explanation for this kind of behavior?! And is there anything i can do... maybe erase the whole ROM (HOW???) or anything?
Regards
Elmar
Is the error message by any chance "USB init failed"?
What version of Windows are you running? Also, do you have a firewall or antivirus application running? I have seen them interfere before and you could try temporarily disabling / deactivating them.
I have an antivirus (AVG), but it is only on Android, which i am not accessing when updating. As i said i tried from windows (6.5) and the update took me to the boot loader but then the windows application is trying to connect and then gets no connect and this error message appears :
"Error (260)
Check the following :
1. PDA Phone is connected via USB
2. USB cable is connected to the workstation"
And it is connected, which you can the on the fact, that the update is running my phone into the bootloader, but then i get stuck on 0% and after that the error message appears.
What you want to do is try disabling the allow usb option in active sync. Do this after you install magldr but before you try to flash the rom. This seems to fix the problem.
Sent from my Wimax infested cm6.1.2 SuperSonic
Hello again...
I am so sorry to have bothered you with my nonsense.
From the workstation i tried (which i strangely flashed all other ROM's before and had no problems) there had been missing the driver for the boot loader which pretty simple explains my problems here (Do'h).
Tried it from a workstation with internet connection and eureka, the driver installed and i could install magldr afterwards.
Thx for all your support and sorry for my homer-like thinking for not checking that before.
P.S. Any of you any recommandations for a good NAND ROM. I think i am going to try MDJ's CyanogenMod7. Or has anyone tried various and come to another good ROM?
Regards
Elmar
Related
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I got this when I first installed the standard DFT ROM, i found that by remving the accept USB connections in activesync resolved it and I was able to install. I then tried to install a different ROM and failed, I tried another and the same. I was initally getting RAPITOOL errors, dll not found. Reinstalled activesync and I am not getting those errors anymore but ROM still wont install. With error above.
Reinstalled Mag ok so bootloader installs still ok, anyone any ideas?
FECK, my NAND Android build has gone as well...
What helped for me:
- If USB is connected: right click on USB -> safely remove MAGLDR USB device
- remove MAGLDR USB driver from PC
- restart pc
- connect phone again via USB and let driver install
Should work fine again now. Guess something can go wrong in the USB driver sometimes.
mag does not show up as a device to remove, i will reboot and try again.
I think activesync reinstall resolved it as it worked after a rebooted, didnt reboot prior to that, thanks for your help anyway.
I spoke to soon, well managed to flash another ROM, didnt like it so flashed again, got half way through and then came up with error again, tried again, back to square one. Anyone ideas what is causing this?
rebooted, still the same, reinstalled activesync and rebooted, all ok again. Why is activesync required, cany anything else be used, anyone any idea what is happening here?
you can install magldr, radio or roms with ruu in 3 color mode in hspl...
get there with wol down key and end call button pressed
when magldr is already installed boot up your phone with pressing end call button until magldr menu appears
and then start you android flashing procedure the way cotulla explained it!
I had the 723 error too and what helped for me was executing the daf.exe with password secured admin rights (your profile on computer has to have admin rights and has to be password secured)
t3g said:
you can install magldr, radio or roms with ruu in 3 color mode in hspl...
get there with wol down key and end call button pressed
when magldr is already installed boot up your phone with pressing end call button until magldr menu appears
and then start you android flashing procedure the way cotulla explained it!
I had the 723 error too and what helped for me was executing the daf.exe with password secured admin rights (your profile on computer has to have admin rights and has to be password secured)
Click to expand...
Click to collapse
Hi, thanks for info but I am passed that point. I have already installed mag and tested my first ROM, I am having this problem when trying to flash new ROMS. I have now go another ROM on by reinstalling activesync and rebooting again, I am hoping someone is aware of this issue and let me know how to resolve it as I dont want to have to go through this rigmarole everytime I want to flash - as I am still at the stage of settling on a ROM and are trying all the current set.
In a much happier place right now. don't have to stress over winmo 6.5 anymore. Thank you all for your help. Lovin' Android on my HD2. So fast.
Try this http://forum.xda-developers.com/showthread.php?t=918698
And this might be helpful, too
deckoff said:
And this might be helpful, too
Click to expand...
Click to collapse
cheers but problem now solved after using android_install.exe rather than daf.exe
I have been flashing my HTC HD2 EU model without issue for weeks now, i have had many different versions of android on and had no problems carrying out all the steps, but after reinstalling windows i am unable to get the MAGLDR drivers to install it appears as an "other device" in device manager with error code 28 (no driver installed)
I have HSPL 2.08 installed. and radio 2.15.50.14
Heres what i have tried:
-install/remove HTC Sync
-install Windows Mobile Device Centre
-installed Android SDK and google driver revision 4
I have booted into bootloader and attempted to reinstall the radio AND HSPL, but the bootloader also shows as an "other device" and it does not show "usb" on the screen, so when i run "romupdateutility" i get connection error 260..
i am fresh out of ideas i have spent nearly a week and half googling the problem is as many ways as possible and nothing even remotely helpful has come up, if i boot into CWM i can mount the SD card and i can install (some) ROMS, but only ones that use the same partition layout i am currently using and i cant use any others because i cannot flash the partition layout.
Theres not an issue with the phone because i have a computer at work and it all works fine there, just wont work on my home laptop
any ideas?
*update* i have read a few people with a similar (not exactly the same) issue are he owners of bricked HD2's my device DOES work it works fine but just wont install this bloody driver so i can never flash another ROM and i dont know why. 36 views and NOONE has an answer?
in WMDC make sure 'allow usb connections' is unticked.
Thanks for that mate your a lifesaver that got it to install the device driver for MAGLDR, but i still couldnt get the bugger to flash via USB, strangely killing ADB in task manager solved this and i am not able to flash. Problem solved!
Has anyone found the resolution? I am also facing the same problem and because of this, I even cannot use Android Debugging.
Any help?
Hi there! I was just wondering what I can do about the following:
trying to install the "Radio Leo 2.15.50.14"; what I've done so far
battery is more than 50%
active-synch-connection stands (at least as long as it isn't being tried to start the flash)
hibernate is off
faster-data-sync is off
tried on all usb-ports
deactivated temporary firewall & a/v program
already tried to execute the program after i got into bootloader
system is sadly to say win7 x32 (sadly because the device-center first says "connected" and when I start trying to update the version suddenly it's "disconnected" and the device-center kills itself) so it'd be deeply appreciated if someone could help me out here!
greets
ps. forgot to say that I've already flash to spl-2.08 - successful! so i was able to smile at least at the message "we hacked it"
First of all welcome to XDA-Developers.
I'm a little bit confused. Have you installed SPL or HSPL?
You have another option to install latest RADIO:
You can download latest ROM3.14 from HTC homepage by enetring your HD2's serial number.
To install it you have to be on SPL1.66.
But you will also get SPL3.03.
Which tool did you use for flashing radio?
I recomend LeoAdvancedRUU.exe.
For all flashing tools: run them as Administrator under Win7!
hey all,
Wanted to do a clean installation of cyanogenm7,
Step by step:
entered bootloader
run task29
enterbootloader
install radio 2.15.50.14
enterbootloader
install magldr113_daf
thats it..
now, it can never use usb flasher (in order to install cwm) from magldr
for only 2-3 times it connected from USB in bootloader, and now it does not happen either. and I couldnt install cwm on that bootloader ofcourse.
windows faults; device not recognized..
did it brick? and.. why?
I'm leaving town for a business meeting tomorrow and have no backup phone right now.
save me please! =)
came home to try on a machine with XP (activesync present)
cant connect and also XP gave the same error..
device not recognized..
any ideas?
went back to laptop, win7x6
it didn't recognize at first, as usual
then it went USB on bootloader.. (did a restart first, and then it says HTC USB SYnc is successfully installed)
task29 'd again
fine
radio install began and, lost connection in the middle.
now says rom code error as normal, but again not recgnizing the device...
If aynone interested, or anyone else having the same problem at the future,
the phone is at the service and the mainboard's gonna be replaced.
http://forum.xda-developers.com/showthread.php?p=15267315#post15267315
Maybe your usb cable is damaged
Might help if you do a fresh reinstalled of windows 6.5 will erase all. And try again.
Sent from my HD2 using XDA Premium App
if you were already running cm7 then all you needed to do to fresh isntall was boot into CWM and factory reset it and isntall the rom from zip
all those extra steps you have taken are pointless
I've been trying to install ACA CLk update to my HD2 since last night. Task29 will not clear rom. Just reads communication error. I have tried it on 2 win7 pc's along with a win xp pc with same results. Please help.
i am having the same error.
whether i run the ROM update utility or use the HD2 tools from the tri-color boot screen, i always get the same UPDATE ERROR (262, i believe).
i'm using USB2, no cradle or dock, brand new HD2.
any help? i'm stuck in a windows environment!
just to be sure : the communication is ok between the computer and ur phone ? u see USB in bootloader?
yes it is between my windows based pc and my HD2. and i have tried through boot loader, seeing seriel first then connecting and then it says USB. i've tried leaving it attached when i restart sit goes straight to USB. i have tried connecting with activesync/windows mobile and then running the ROMupdateutility.exe
i always get the same error: it stalls out right when the progress bar appears and never gets above 0%. then the error screen shows on my PC and i have to go through the recovery process.
thank you for any and all assistance! and sorry for the typos, im normally use swype.
this might have been the problem.
i did not have HardSPL3 installed.
i have done it, and then MAGLDR installed fine.
i skipped Task29 mostly bc i never ran that on earlier installs.
so try HardSPL to solve it, maybe?
(i'm still pretty new to this, so take my suggestions with a few grains of salt)