x10 flashtool 0.2.5, thanks! - XPERIA X10 General

seeing as how im new to the forums and i dont have 10 posts yet so i cant post in the developers forum, i'd like to extend my thanks here. i HAD a locked ATT x10 with 1.6. i was concerned about backing up my phone since ATT locked the ericsson backup & restore application. so i found the APK and downloaded it on my laptop, i then sideloaded it with android sdk via adb install and was able to back everything up before hand. i then continued with the flashtool 0.2.5 version and bundled the decrypted 2.1 ROM. i continued with the flash as instructed (including wipe userdata) and i got a flashtool log of:
24/036/2011 10:36:51 - INFO - <- This level is successfully initialized
24/036/2011 10:36:51 - INFO - Starting adb service
24/037/2011 10:37:21 - INFO - Preparing files for flashing
24/037/2011 10:37:56 - INFO - Searching for Xperia....
24/037/2011 10:37:57 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&CDE1754&0&1
24/037/2011 10:37:57 - INFO - Start Flashing
24/037/2011 10:37:57 - INFO - Sending loader
24/037/2011 10:37:57 - INFO - ### read failed : checksum err! FFFFFFFF!=CBEF977B
24/037/2011 10:37:59 - INFO - Loader sent
24/037/2011 10:37:59 - INFO - Flashing kernel.sin
24/038/2011 10:38:03 - INFO - Flashing amss_fs.sin
24/038/2011 10:38:03 - INFO - Flashing system.sin
24/041/2011 10:41:15 - INFO - Flashing dsp1.sin
24/041/2011 10:41:20 - INFO - Flashing fota1.sin
24/041/2011 10:41:24 - INFO - Flashing fota0.sin
24/041/2011 10:41:25 - INFO - Flashing amss.sin
24/041/2011 10:41:33 - INFO - Flashing userdata.sin
24/041/2011 10:41:37 - INFO - Flashing cache.sin
24/041/2011 10:41:40 - INFO - Flashing finished.
24/041/2011 10:41:40 - INFO - Now unplug the device and power it on
24/041/2011 10:41:40 - INFO - Then go to application settings
24/041/2011 10:41:40 - INFO - turn on Unknown Sources and Debugging
i tried flashing the first time and noticed the 24/037/2011 10:37:57 - INFO - ### read failed : checksum err!
i turned the phone back on and it restarted with the old 1.6 still intact with no changes. i then proceeded to try the process and second time and I got the same error except this time the flash process took much longer. i thought i bricked my phone as it tried to boot and showed me a picture of a camera and then the SE logo for a long time... i proceeded to wait and VOILA! even with the checksum error 2.1 is loaded and i was able to restore my settings with 2.1 installed. i havent found any errors yet and wifi seems to turn on just fine.. havent found a single problem yet. does anyone know what this checksum error equates to?
but like i said everything seems to work as of now, i have to extend many thanks! i look forward to hopefully a stable 2.3 gingerbread in the future, thank you!

i have however noticed that instead of a "3G" connection i now see an "H", i went into "about phone" and "status" it says its using HSPA... is this bad? i know it stands for high spee packet access but im unsure of the transfers rate between it and 3g...but more importantly...why has it changed after upgrading to 2.1?

i believe "H" is faster then 3g and was just an added feature in 2.1

sure hope so...i wonder if theres a way to switch back if i want to...save battery life.

You can switch to gsm in wireless conections, mobile nets, net mode, and select only gsm (2g), so you can save battery but it is also slower. Sorry if the menu names doesn't match exactly, are translated form spanish version.

"H"
I gotta thank the devs for this tool also. Flashing, rooting, cleaning, optimising everything went fine on mine. What else can you wish for?
The H is totally normal and it is really faster than 3G...there's nothing to worry about

sagacious1 said:
i have however noticed that instead of a "3G" connection i now see an "H", i went into "about phone" and "status" it says its using HSPA... is this bad? i know it stands for high spee packet access but im unsure of the transfers rate between it and 3g...but more importantly...why has it changed after upgrading to 2.1?
Click to expand...
Click to collapse
H is for HSPA, as you've figured out. It is what AT&T was installing in 2010 while the other carriers were installing fake 4G. H is for 3.5G.
HSPA+ will be AT&T's first go with 4g, ultimately moving on to LTE. HSPA+ will be a high-speed fallback network for when AT&T fails to provide adequate data coverage. Neither of those will likely run on the X10, so the H is our last upgrade of that nature.
Sent from my X10a using XDA App

i know theres gotta be some high level gee wiz bang developer from either Sony or AT&T that can tell us whether or not the X10's transceiver will be able to run HSPA+ or LTE; whether it requires a software upgrade or not.

Related

please help upgrade hw6925

Hi XDA Gurus
I have an hw6925. It was unlocked by entering a code.
On the page for selecting my network I see a single button "Find Network". It gives no control to select a network by hand or to set a preferred network. I basically have only the top button of the three you can see in the attachment below.
In theory I should have those options... I have a hw6940 with those options and even the ATT/Cingular website for this model shows that I should have those options. (see http://www.wireless.att.com/answer-center/main.jsp?t=solutionTab&ps=solutionPanels&solutionId=54869).
The phone is also unable to detect that it is roaming. (The roaming triangle symbol never appears when I am roaming, and the activesync roaming schedule is never used.)
It is not clear to me why I am missing these options but I believe it may be because the firmware is not the last version. The Asset Viewer shows that the ROM is 1.30CIN.03ENG (bootloader G.39) and the Radio firmware is 1.02.00. My hw6940 shows firmware 1.48NA.00ENG (Bootloader G.39) and Radio firmware 1.08.00.
I really need to have these options so I am trying to understand how to upgrade my phone. There is no newer firmware for this model offered on neither the HP nor the ATT/Cingular sites. The HP site has the upgrade for both the main and radio firmware, but will not allow me to flash those to my hw6925.
I'm pretty technical but I dont have much experience with these HTC devices.
So, my questions:
1. Does anybody know a simple reason why I dont have the network functions in my hw6925? Is it because of the radio firmware? or the general firmware? or something else?
2. Assuming it is the firmware, any idea how I can upgrade it? Do you think it is possible to use something like HPRUU.EXE to read the radio firmware from my hw6540 and then load it onto the hw6925? Or am I likely to brick it that way? (Can I backup my hw6925 firmware, try it, and if it fails then reload the hw6925 firmware?)
3. Any other ideas how to convert it to a generic hw6945?
Your help is really appreciated!
Thanks
Ron
if anybody else finds this and needs to solve this problem too, I have found a solution.
indeed the issue is not with the ROMs.
there is some feature used by cingular to disable these features, and it is controlled somehow by the SIM card. you can see discussion of this in these two threads:
http://forum.xda-developers.com/showthread.php?t=284201
http://forum.xda-developers.com/showthread.php?t=266794
The solution is to edit the registry under HKLM\Security\Phone\, and set these values:
L: 0
ManualDisable: 1
PreferredDisable: 1
All three should be set to 0. (In my case I did not have a PreferredDisable at all, I added the DWORD entry just to be sure).
In the threads listed some people complained that these values were reset to 1 during reboot. In my case (with no cingular SIM, since my unit is unlocked) I did not have this problem.
Hope this will save somebody else a few hours of searching...
Ron

flashing new radio, now lost 2g/3g data?!

I had cm7.0.3 running ok with radio:
October 2010: Radio_12.28b.60.140e_26.03.02.26_M - HTC WWE 1.32.405.6
I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=896597
to flash recommended radio:
4th January 2011: Radio_12.28e.60.140f_26.04.02.17_M2_SF - HTC WWE 1.72.405.3 R2
I'm not sure if it was because I didn't wipe but everything since was very jerky and the device was unresponsive, therefore I reverted to an older ROM I had backed up. Now I have found that I no longer have a 2g/3g data connection, the phone just states "unknown" within my quicker app settings.
Does anyone know why I've had this problem, or better still any ideas how I can resolve?
Punch in *#*#4636#*#* into your keypad and head into Phone Information.
What info is displayed? You may need to type it all out.
Cool, thanks for this info.
Right I have followed your instructions and before I write everything out I have notice that at the bottom of the first menu (which is: Phone info) the "set preferred network type was set to "WCDMA preferred", am I right in saying I should change to "GSM only" or "GSM auto (PRL)?
Mine is set to WCDMA preferred and I get 2G/3G/H. Try it, you have nowt to lose at this point.
Ok, changing that doesn't seem to have worked. I lost regular phone signal.
Phone info for you:
IMEI: xxxx
phone number: unknown
current network: orange
signal strength: -99dBm 7 asu
location: LAC = c32 CID = c32adb2
neighbouring CID: no neighbouring cells
roaming: not roaming
GSM service: in service
GPRS service: Discountinued
network type: UMTS
message waiting: false
call redirect: false
call status: idle
radio resets: 0
data attempts: 0
data success: 0
GSM disconnects: =========DATA==========
State: DcInactiveState
disconnected with last try
at 12:59 AM
fail because No Error
PPP sent: 0 pkts, 0 bytes
PPP received: 0 pkts, 0 bytes
Number of PPP reset since boot: 0
Set preferred network type:
WCDMA preferred
Does this help you at all? Thanks, appreciating your support.
It does a bit. GPRS service reads "Discontinued". If you had disabled data on your phone it would read "Disconnected".
What I would do is try the same SIM card in another phone. If you cannot try that you can check your APN settings.
Settings > WiFi & networks > Mobile Networks > Access Point Names > check you have the correct settings.
I can't try the SIM card part until tomorrow.
Prior to leaving work today I did check my phones APN settings against a work mates (since he has an unrooted DHD) and they appeared correct. Both phones has two Orange UK (-orangeinternet) and Orange UK MMS (orangemms).
I removed the SIM and battery and then re-assembled.
I have been changing things and then checking, now it states the following (with regards to the list I provided you earlier):
Phone Number now appears
GPRS service now states disconnected
and the GSM disconnects still states:
=========DATA==========
State: DcInactiveState
disconnected with last try
at 12:59 AM
fail because No Error
PPP sent: 0 pkts, 0 bytes
PPP received: 0 pkts, 0 bytes
this is all with "WCDMA preferred"
I have also re-flashed with the radio that was previously in the phone (26.03.02.26), but still no data connection...
The only sure fire way to find out if its your setup is to run the 1.32 RUU and flash back to stock. If you get data then its your system / radio / RIL setup.
If you flash back to 1.32 you can be fully rooted / S-OFF / etc again in about 1 hour.
Ok, thanks for that.
Just to provide a little more detail:
I had to downgrade before rooting to CM7-RC4, then I moved to CM7-final, CM7.0.2 and then CM7.0.3 before I decided to upgrade my radio from 26.03.02.26 to 26.04.02.17.
This is when I hit my data problem.
Since then reverted to an older ROM backup and I have re-flashed different radio's to see if it would come back to life.
I have now applied the CM7.1 update (since I guessed I have nothing to lose).
Tomorrow I will try and make time to drop to 1.32 RUU.
Am I right in saying the RIL is the tie-in between the software and the radio? It sounds like this might be my problem now?
I'll need to research the procedures to do what you suggest since I'm still pretty new to all this...
Thanks again, I'll let you know how I get on.
Yes you are correct the RIL sits between the Radio and software.
An incorrect RIL could be the cause. Have you tried flashing the recommended RIL?
Ok, thanks.
I have some time now to play with this, would you happen to know if it matters which order I do this in?
radio, RIL, then ROM?
Sorry for that, I found the answer to my own post, RIL last!
I have now re-flashed radio:
Radio_12.28g.60.140f_26.05.05.27_M3
and then applied RIL (using ROM Manager):
HTC-RIL_2.2.0099HM
Still had no joy.
Ran the 1.32.exe application to return to stock (it informed me that it was changing 2.36.405.8 to 1.32.405.6) and my data has returned! My voicemail icon has returned too!
Would be ace to have these with CM7!
Any suggestions on the quickest and more reliable way to get to CM7?
1. flash newer radio
2. test vm & data connection
3. flash cm7
Just to let you know that after flashing radio vm and data still worked and then going onto cm7.0.3 my data still works - fixed! Although, I have lost my voicemail Still happy though, thanks for your suggestions.

[Q] After factory reset HOME BUTTON doesnt work ..!

Hi..!
I download a file named "Root_Unroot_Sony_1.5.rar" from this forum 3 weeks ago for my XPERIA ARC LT15i to root it without flashing...and it worked perfectly..
but I decided to do a factory reset, you know there are lots of junks and trashes on the phone...then I did a unroot process with the same program again..and it worked again..but after FACTORY RESET i noticed the HOME BUTTON doesnt work..? but why?
and im pissed off so much now...
The firmware on the phone is 2.3.4 so it is 4.0.2.A.0.42 original generic rom..
What can I do now ? fast answers will be appreciated..!
1. The menu and home buttons' keypresses are detected but the respective actions aren't executed.
2. The lockscreen doesn't get activated.
3. The power menu has only reboot and power off as options. The rest of the options like Airplane Mode and Profiles.
This is your issues? If yes, try This
Thanks for the reply...
now another weird problem i have which is when i try to flash my LT15i with 4.0.2.A.0.42 original generic rom via Flashtool-0.5.3.0 i get this message ;
03/029/2012 21:29:11 - INFO - Searching Xperia....
03/029/2012 21:29:12 - INFO - Found at USB\VID_0FCE&PID_ADDE\6&35B93047&0&4
03/029/2012 21:29:12 - INFO - Start Flashing
03/029/2012 21:29:12 - INFO - VER="R9A021";DATE="20110128";TIME="11:49:00";
03/029/2012 21:29:12 - INFO - Flashing loader
03/029/2012 21:29:12 - INFO - Device connected in flash mode
03/029/2012 21:29:14 - INFO - PROT_VER="03";DATE="20110217";TIME="15:47:00";VER="R4A066";CXC="1234-5769";TYPE="S1_LOADER";UNIQUE_DEV_ID="081C7E5B5DF0B048D8A032CA87B53F715B928276";SEC_LOCK_STATUS="LOCKED";OTP_DATA="4B6D7100471404C815080428001488E3B001002000000000";IMEI="01268200134594";AID_VERSION="0004";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";HWCONF_AID="0001";PROD_ID="0001";ACTIVE_LOADER_AID="0001";MEMDEVS="02:00:002C:00B3:0000:00002000:00020000:00000800:00000040,03:03:001B:534D:0010:0001DA60:00010000:00000200";MAN_ID="002C";DEV_ID="00B3";SIN_VER="0001";AID_TAMP="NOT_TAMPERED";MAX_PKT_SZ="00010000";AUTH_LEVEL="NONE";AUTH_MET="0001";CARD_PRESENT="YES";CARD_SIZE="8GB";CARD_DATA="";LOADER_ROOT="S1_Loader_Root_773f";EROM_ROOT="S1_EROM_Root_d601";SW_ROOT="S1_SW_Root_883f";CUST_ROOT="S1_Cust_Root_9603";SIM_LOCK_ROOT="S1_SL_Root_c422";HW_CONF_ROOT="S1_HWConf_Root_08af";BIM_STATE="DISABLED";
03/029/2012 21:29:14 - INFO - Flashing finished.
03/029/2012 21:29:14 - INFO - Now unplug the device and power it on
03/029/2012 21:29:14 - INFO - Then go to application settings
03/029/2012 21:29:14 - INFO - turn on Unknown Sources and Debugging
Although Unknown sources and Debugging options are enabled, program tells me switch them to enabled ??? so I couldnt flash the phone...but I flashed the phone before with the same program and ROM together..!
My OS: Windows 7 , 64 bit Build 7601 Service Pack 1
dantevergil
Flashing Finished
Click to expand...
Click to collapse
What do you need? It's finished and turn on the phone

Fixing 0 IMEI

Hello. I've been getting a lot of emails on how to do that and i thought i should make a thread here.
Now you got to have the original box in which there is the imei written. I don't take any credit for this guide as i didn't write it but i found it somewhere here but it doesn't exist anymore. I'm not responsible for any damage may happen to your phone. I did it several times after flashing official 2.3.5.
It has worked fine with my IDEOS X5 U8800.
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk...012_09_12.html
c. Software for restore
http://www.2shared.com/file/xBxUOnPz/DFS.html
2. Enable debugging by USB in the settings.
In call type * # * # 2846579 # * # * http://postimage.org/image/tnj4s2dyj/
3. Go to ProjectMenu -> Background settings -> Usb port settings put the Manufacture mode and corfim.
4. Go again to ProjectMenu -> Background settings -> Qualcomm backround open settings put the background open. Password 0 and corfim.
5. Go again to ProjectMenu -> Background settings -> Log setting -> Log switch put log on and corfim.
6. Now conect your phone to pc and install the drivers.
You must see this at your device manager http://postimage.org/image/5lrm61agd/
7. Instal DFS and run.
8. Click Ports, select the port with the signature DBAdapter Reserved Interface (double click) to close.
http://postimage.org/image/3l3bmfyzr/
9. In the DM select Qualcomm.
http://postimage.org/image/6bmt1908z/
10) Press the SPC, the bottom will Device Unlocked.
11) Select Programming and in the IMEI write yours and press Write.
http://postimage.org/image/dmbp29q35/
13) Check Imei, may appear after a reboot, if not try a few more times to try to set the port speed to 115200 (box to the left of DM)
Check IMEI *#06#
As soon as the IMEI restored change:
* # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings to put on the Manufacture mode google mode (or normal if you do not get up google)
* # * # 2846579 # * # * -> ProjectMenu - > Background settings -> Qualcomm backround open settings put close
Good luck..
Thanks a lot... now I got my imei back. But now I have one another problem, I installed ics rom and now my wifi Mac id is 00:00:00:00:00:00. Are they related?
Sent from my U8800 using XDA Premium 4 mobile app
I don't think so. But I've already replied somewhere on how to fix mac address. Search
Sent from my U8800 using xda app-developers app
Didn't work for me
Cybergiannis said:
Hello. I've been getting a lot of emails on how to do that and i thought i should make a thread here.
Now you got to have the original box in which there is the imei written. I don't take any credit for this guide as i didn't write it but i found it somewhere here but it doesn't exist anymore. I'm not responsible for any damage may happen to your phone. I did it several times after flashing official 2.3.5.
It has worked fine with my IDEOS X5 U8800.
1. Tools
a. Drivers for U800 32bit win 7 (tested and work )
http://www.2shared.com/file/fnP5fc8G/u8800Drivers.html
b. Drivers for Android 32 and 64 bit win 7 (not tested )
http://www.2shared.com/file/ZNZ4Q0lk...012_09_12.html
c. Software for restore
http://www.2shared.com/file/xBxUOnPz/DFS.html
2. Enable debugging by USB in the settings.
In call type * # * # 2846579 # * # * http://postimage.org/image/tnj4s2dyj/
3. Go to ProjectMenu -> Background settings -> Usb port settings put the Manufacture mode and corfim.
4. Go again to ProjectMenu -> Background settings -> Qualcomm backround open settings put the background open. Password 0 and corfim.
5. Go again to ProjectMenu -> Background settings -> Log setting -> Log switch put log on and corfim.
6. Now conect your phone to pc and install the drivers.
You must see this at your device manager http://postimage.org/image/5lrm61agd/
7. Instal DFS and run.
8. Click Ports, select the port with the signature DBAdapter Reserved Interface (double click) to close.
http://postimage.org/image/3l3bmfyzr/
9. In the DM select Qualcomm.
http://postimage.org/image/6bmt1908z/
10) Press the SPC, the bottom will Device Unlocked.
11) Select Programming and in the IMEI write yours and press Write.
http://postimage.org/image/dmbp29q35/
13) Check Imei, may appear after a reboot, if not try a few more times to try to set the port speed to 115200 (box to the left of DM)
Check IMEI *#06#
As soon as the IMEI restored change:
* # * # 2846579 # * # * -> ProjectMenu -> Background settings -> Usb port settings to put on the Manufacture mode google mode (or normal if you do not get up google)
* # * # 2846579 # * # * -> ProjectMenu - > Background settings -> Qualcomm backround open settings put close
Good luck..
Click to expand...
Click to collapse
This procedure did not work for me. I found it a couple of weeks ago in another thread (http://forum.xda-developers.com/showthread.php?t=1591997) and gave it a try (numerous times) without success. I was able to complete all steps up until actually writing the new IMEI. I attempted to write it a couple of dozen times without any success. It appears to work but the lMEI never actually changes.
I also found another procedure using a program called NVedit but it would give me an error stating the NV location was set to read only (I forget the actually wording). It seems that my phone has the location that contains my IMEI locked in some way that nothing can change it. So I gave up on that phone and am using a different one that I bought on eBay, brand new at a dirt cheap price ($27.00).
pastorbob62 said:
This procedure did not work for me. I found it a couple of weeks ago in another thread (http://forum.xda-developers.com/showthread.php?t=1591997) and gave it a try (numerous times) without success. I was able to complete all steps up until actually writing the new IMEI. I attempted to write it a couple of dozen times without any success. It appears to work but the lMEI never actually changes.
I also found another procedure using a program called NVedit but it would give me an error stating the NV location was set to read only (I forget the actually wording). It seems that my phone has the location that contains my IMEI locked in some way that nothing can change it. So I gave up on that phone and am using a different one that I bought on eBay, brand new at a dirt cheap price ($27.00).
Click to expand...
Click to collapse
are you rooted? i remember having these issues when i flashed 2.3 after 4.2 rom. u first need ti flash 2.2 then 2.3 and that should work
Cybergiannis said:
are you rooted? i remember having these issues when i flashed 2.3 after 4.2 rom. u first need ti flash 2.2 then 2.3 and that should work
Click to expand...
Click to collapse
Yes, I am rooted.
I started out on 2.2 way back in the beginning. Then I flashed 2.3.5. That's when I lost my IMEI and replaced the phone.
But I wanted to keep experimenting at getting it working 100% even though I had a new working, rooted, and customized phone. Using 5IromToolBox I restored a backup from the new phone to the broken phone just to see if it would work. Then I flashed Stallion-51-ICS custom ROM. It is a GB based ROM with look and feel of ICS.
When I run the procedure in this thread, everything looks as though it has worked, but the IMEI never changes. So what did 5Irom do differently that it was able to restore the backup from a different phone but I cannot use DFS or NVEditor to write to the locations? The back I made from the new phone and restored to the old one is Consumer Cellular so I suspect they have locked something out that 5Irom is able to get around but other tools don't.
On another note, just for the heck of it I tried to upgrade to ICS from GB and it fails on the first update step. Go figure.
If I could find a full-flash procedure for the pro and 51 versions of this phone I suspect I could resolve all issues. Who knows?
UPDATE: I went through the whole process again and noted a point I forgot to mention. In DFS at the bottom of the screen EQF is yellow, not green. I don't recall exactly what that means but in reading through the DFS doc, it states that writing a new IMEI is not possible as long as EQF is yellow. When I enter my IMEI and click on the WRITE command the response is "MODECHANGE OfflineD OK"
pastorbob62 said:
Yes, I am rooted.
I started out on 2.2 way back in the beginning. Then I flashed 2.3.5. That's when I lost my IMEI and replaced the phone.
But I wanted to keep experimenting at getting it working 100% even though I had a new working, rooted, and customized phone. Using 5IromToolBox I restored a backup from the new phone to the broken phone just to see if it would work. Then I flashed Stallion-51-ICS custom ROM. It is a GB based ROM with look and feel of ICS.
When I run the procedure in this thread, everything looks as though it has worked, but the IMEI never changes. So what did 5Irom do differently that it was able to restore the backup from a different phone but I cannot use DFS or NVEditor to write to the locations? The back I made from the new phone and restored to the old one is Consumer Cellular so I suspect they have locked something out that 5Irom is able to get around but other tools don't.
On another note, just for the heck of it I tried to upgrade to ICS from GB and it fails on the first update step. Go figure.
If I could find a full-flash procedure for the pro and 51 versions of this phone I suspect I could resolve all issues. Who knows?
UPDATE: I went through the whole process again and noted a point I forgot to mention. In DFS at the bottom of the screen EQF is yellow, not green. I don't recall exactly what that means but in reading through the DFS doc, it states that writing a new IMEI is not possible as long as EQF is yellow. When I enter my IMEI and click on the WRITE command the response is "MODECHANGE OfflineD OK"
Click to expand...
Click to collapse
it should be green! what i would do is to flash 2.2 then 2.3.5 and follow again the steps very carefully! maybe u ever flashed a partition and it's not the default one? i can't really help you :/ try this and if it doesn't work make a thread in the q&a section
Cybergiannis said:
it should be green! what i would do is to flash 2.2 then 2.3.5 and follow again the steps very carefully! maybe u ever flashed a partition and it's not the default one? i can't really help you :/ try this and if it doesn't work make a thread in the q&a section
Click to expand...
Click to collapse
Yeah, I knew that it should be green. The bottom line is I do not have the 2.2 image to flash. I would have done that a long time ago if I had it. All I have is the DiskImage backup that I made off of my new phone. When I flashed it onto the old phone it starts, displays the Consumer Cellular logo for about ten seconds then shuts off immediately. As far as starting a thread in Q & A, I did that weeks ago and got nowhere fast.
Any link I have found for the original 2.2 for -51 and pro is usually a broken link. or it takes me to download that stupid iLivid program that doesn't do squat to get the files I need. I did find a DiskImage file that somebody made and posted but it is almost 4 gig in size. You are supposed to use Pink Screen to load it but Pink Screen only gives me access to the image directory and it's only 256 meg.
Thank you for your time and suggestions.
I believe in the wiki section there are links to default 2.2 and 2.3.5. The ones I found a long time ago were from Blefish, although I'm not sure. Good luck!
Sent from my U8800 using xda app-developers app
Dead link.
Hi.
I try to download the "Drivers for Android 32 and 64 bit win 7 (not tested )", but its a dead link. I run win7 pro, and somehow the 32 bit driver doesn't work.
Would like to try the 64 bit driver. Could u reupload it, please?
I just did a repost cause i veen asked a lot of times I don't have the files and I don't thinks drivers are needed. You could just install huawei's suite for PC
Sent from my U8800 using xda app-developers app
WORKS!!!!
Cybergiannis said:
I just did a repost cause i veen asked a lot of times I don't have the files and I don't thinks drivers are needed. You could just install huawei's suite for PC
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
YEY!!!!!!! It worked!!!!
Update the first post with this info so others dont have to struggle like I did.
Thanks a bunch!!! :victory:
ευχαριστω πολυ----thanks man
Hi All,
Many thanks for this post.
Iv recently installed the Blefish CM11 rom for U8800 and its works fine. Only issue I have is IMEI=0. I can make and receive calls and even use the mobile internet.
My question is - Is there a way to edit the IMEI no on KK4.4.2 ROM through entering in the engineering mode?
or else, will have to start from the beginning (stock rom process as mentioned in the OP).
thanks for your help.
mohammad.nomaan said:
Hi All,
Many thanks for this post.
Iv recently installed the Blefish CM11 rom for U8800 and its works fine. Only issue I have is IMEI=0. I can make and receive calls and even use the mobile internet.
My question is - Is there a way to edit the IMEI no on KK4.4.2 ROM through entering in the engineering mode?
or else, will have to start from the beginning (stock rom process as mentioned in the OP).
thanks for your help.
Click to expand...
Click to collapse
i have no idea. my guess is that u should try
Cybergiannis said:
i have no idea. my guess is that u should try
Click to expand...
Click to collapse
Hi,
I haven't found out the way to fix it yet.
Only way I got to fix is to redo the stock rom, root, save the imei and the reflash the custom rom.
The reason for the imei issue was changing the partitions
thnx anyways
this guide that you have post it has been made by me and at least you should have say that is ported from me. Even the links that you have are in my acount. YOU ONLY COPY MY POST . you could ask me to repost it or just mention me. Check this link http://forum.xda-developers.com/showthread.php?t=1876501

Success flashtool to flash Global Firmware on my G8232 ! Guide for newbiew (like me)

I got this G8232 as Gift from my USA's cousin which has disable fingerprint manager by default. This issue make me sick. I want it back by flash my phone to global firmware. But problem:
1. Flashtool newest version have no G8232 in device list. Okay if you stuck at this here is trick:
Download Device update for flastool here:
https://forum.xda-developers.com/xzs/how-to/flashtool-devices-update-t3601722
- Extract you will have folder G82xx
Open flashtool (newest version) wait until it loaded all script you will see there are only 94 device loaded
see pic:
how do you upload pictures
- Copy folder: G82xx to %userprofile%\.flashTool\devices (copy this to "RUN")
- Back to opening flashtool click: Device - Manage - Import. You will have 95 devices imported with notice:
"06/039/2017 21:39:25 - INFO - Loading devices database
06/039/2017 21:39:25 - INFO - Loaded 95 devices"
how do you upload pictures
2. All done ! Go ahead make your own ftf firmware by xperifirm and flash your phone.
3. While flashing you may got notice:
06/040/2017 21:40:46 - INFO - No matching loader found
06/040/2017 21:40:46 - WARN - No loader found or set manually. Skipping loader
And flashtool will popup using 41.fsc click YES then all go through.... (if not restart your PC reinstall flashtool drivers and restart over again)
how do you upload pictures
Bravo now my G8232 fingerprint manager is back ! Big thanks everybody !
Thanks, which FW did you use?
Thanks for the quick and easy guide. Very helpful and I have successfully created an FTF file as a test. Just curious which firmware you used? I'm looking for something that has as little bloat as possible but understand each variant will come with some.
Example, did you use the customized SG, HK, etc. release?
Thanks in advance!
Avalanche46 said:
Thanks for the quick and easy guide. Very helpful and I have successfully created an FTF file as a test. Just curious which firmware you used? I'm looking for something that has as little bloat as possible but understand each variant will come with some.
Example, did you use the customized SG, HK, etc. release?
Thanks in advance!
Click to expand...
Click to collapse
My G8232 release with USA firmware with fingerprint is disable
I living in Vietnam so i use Xperifirm and make FTF with Costumized VN Firmware and flashed my phone. I'm sure u can flash any global ftf firmware to make fingerprint manager is back
ru image host
XuanDinh said:
My G8232 release with USA firmware with fingerprint is disable
I living in Vietnam so i use Xperifirm and make FTF with Costumized VN Firmware and flashed my phone. I'm sure u can flash any global ftf firmware to make fingerprint manager is back
ru image host
Click to expand...
Click to collapse
Giúp mình với. XZs k nhận driver để flash TFT. mình tìm đủ các driver rồi mà đều báo fail khi add driver (
Only get this:
29/004/2017 23:04:06 - INFO - No flash script found.
29/004/2017 23:04:06 - INFO - Flash script is mandatory. Closing session
29/004/2017 23:04:06 - INFO - Ending flash session
29/004/2017 23:04:06 - INFO - Flashing finished.
29/004/2017 23:04:06 - INFO - Please unplug and start your phone
29/004/2017 23:04:06 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
29/004/2017 23:04:06 - INFO - Device connected in flash mode
29/004/2017 23:04:12 - INFO - Device disconnected
Janus00 said:
Only get this:
29/004/2017 23:04:06 - INFO - No flash script found.
29/004/2017 23:04:06 - INFO - Flash script is mandatory. Closing session
29/004/2017 23:04:06 - INFO - Ending flash session
29/004/2017 23:04:06 - INFO - Flashing finished.
29/004/2017 23:04:06 - INFO - Please unplug and start your phone
29/004/2017 23:04:06 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
29/004/2017 23:04:06 - INFO - Device connected in flash mode
29/004/2017 23:04:12 - INFO - Device disconnected
Click to expand...
Click to collapse
same for me also
3mozz said:
same for me also
Click to expand...
Click to collapse
Another user in the patch thread solved it. You have to copy the G82XX patch to the device folder to overwrite the files and then press export first before importing the folder in flashtool.
"Delete that folder add the new folder then click export and then import the new folder and tadaa worked for me"
Hi guys. I have a question. So I have the US dual sim version as well. If I flash to global firmware do I lose my DRM keys for the camera?
Basically all I want to do is use global firmware to get fingerprint reader working. I don't really care for rooting it. I want to keep my camera DRM working. I tried reading a guide but it only shows me how to root. But I don't want to root.
How to video
I made a how to video a few weeks back on how to activate the fingerprint sensor.
I was having issues like the ones mentioned above and after several failed attempts I figured out what worked
This damn thing doesn't let me post links so just Google how to activate the fingerprint sensor on the Xperia xzs or just search for my channel using my username on YouTube
can you help me sir plz
contact me on my Gmail
[email protected]
i don't know how to do this method ?!
Does your phone keep receiving automatic updates from sony?
Does your phone keep receiving automatic updates from sony?
Please upload Sony Xperia XZs Global Firmware
XuanDinh said:
My G8232 release with USA firmware with fingerprint is disable
I living in Vietnam so i use Xperifirm and make FTF with Costumized VN Firmware and flashed my phone. I'm sure u can flash any global ftf firmware to make fingerprint manager is back
ru image host
Click to expand...
Click to collapse
could you help me sir to do this?
skipper1448 said:
How to video
I made a how to video a few weeks back on how to activate the fingerprint sensor.
I was having issues like the ones mentioned above and after several failed attempts I figured out what worked
This damn thing doesn't let me post links so just Google how to activate the fingerprint sensor on the Xperia xzs or just search for my channel using my username on YouTube
Click to expand...
Click to collapse
what is your username on youtube?
Shadow_Company said:
what is your username on youtube?
Click to expand...
Click to collapse
I deleted the video a while ago. It's a 6 year old phone at this point.
skipper1448 said:
I deleted the video a while ago. It's a 6 year old phone at this point.
Click to expand...
Click to collapse
could you contact me to provide help?
[email protected]

Categories

Resources