Related
I have just got the HD2 and been using it for a few weeks. Downloaded a few apps (eg HTC rom, BSB tweeks) and all is good. Saw Max Manila and looked like a great idea - checked my manila version 2.5.19211619.0 and downloaded 2.7 SE (checked it's right for my manila) loaded onto phone and it crashed after soft reset. Took battery out and phone doesn't go past first screen (with the red writing bottom left) - Hard reset is the same and now I'm worried!
Any ideas???
sad to say yy sounds like hard reset time.
power off, hold volume up and volume down, tap power keeping volume up and down pressed til the screen comes on and follow the prompts.
it will reset your phone to factory defaults.
never used max manila so I cant help with what the problem might be, but if there is a developers thread for it you might be better asking there.
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
if your phone is provider locked then that will not work.you need the rom that came on your phone. so if was from uk o2 then you need the o2 uk rom, otherwise it wont work.
No luck! Whilst I've got everything to sort the phone out it won't do anything but load the white first screen no matter which buttons I hold down.
Man this sucks!
Guess there's nothing for it except the bin unless anyone else has any other ideas??
can you get into boot loader?
press and hold vol down(not up this time, just down) tap and release power, keep vol down held. should boot to striped cultures colored screen.
if you can what does it say next to SPL?
Hi Samsamual
Thanks for helping but no, won't go into bootloader either - doesn't respond to any input (even when I conect the usb the charge led doesn't come on!) and just starts with the white screen with the HTC logo and then the red writting appears and it just hangs - left it for 5 mins just to be sure and no change
Looks like I've really messed it up although I have no idea what I did wrong - instal went just like the other things I installed.
Ahh shame. All i can suggest is the original rom sd card method. But it MUST be the propper rom that came on your phone, so if you got it from vodaphone, , , even if it is unlocked, you must use the voda rom.
Also, have a really good read through the pages in teh rom development section. If you can find someone with the exact same issue, you could be one step closer to fixing it.
Brotherskid said:
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
Click to expand...
Click to collapse
you must tab the power botton for a short time just tab it and leave it with keeping pressing on the volume up and down buttons don't leave them i think it must work with you tell me if it works
Brotherskid said:
...I'm going to try booting from the sd card b
Click to expand...
Click to collapse
When you tried the SD card method did you use a 2GB SD card and was it formatted to FAT32?
WB
Have you tried a boot (all combinations!) without the sd card installed?
Hoss and WB - thanks for the comments
Hoss, I've held the volume buttons for over a minute after powering on - no change
WB, I can't get the phone to go into boot loader screen but thanks for the info for the future. Next time I'll see if I can copy the original rom just in case.
Resigned myself to having a new paper weight on my desk and looking for a new phone - Guess I won't be putting so many programs on my new one....
PA - Thanks for the advice - Yes tried with sd card in/out sim in/out bootloader, hard reset, soft reset and always the same.
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
rlydiard said:
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
Click to expand...
Click to collapse
What's most annoying is it wasn't as if I was doing anything crazy! Max manila is used by many people (from what I've seen in the threads) and I guess I downloaded the wrong one (although naturally I checked and it's the right one). Certainly will curb my using of 3rd party software! As for the warranty, you're right, I can try and see if it can be fixed (bizarrely, that hadn't occured to me - I thought that with no resets working HTC couldn't do anything). Thanks for the tip and I'll let you know how I get on.
Surely your warranty will cover this. Yes, let me (and us) know how all of this goes. You will get your phone back to what you deserve, for sure!
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
watnuweer said:
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
Click to expand...
Click to collapse
Experential nut I may be, but just wondering if you had the problem after you installed the MAx manila? I wonder now what versions of OS may be causing this problem.
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
fakker said:
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
Click to expand...
Click to collapse
This is getting more interesting, what do you suppose is the cure of taking out the battery, and then charging? I do not doubt your experience, I am just extremely curious if anyone can explain this phenomena.
I have to say, I am real close to getting rid of my HD2 and going back to the basic Samsung Comeback in my drawer. I had the AT&T Tilt a few years ago and loved it but just couldn't afford the bells and whistles package that you needed to fully enjoy it. I've since switched to Tmobile and now am able to afford the full unlimited everything package to enjoy this new HTC HD2.
However, over the last few weeks, this phone has gotten increasingly worse. I installed the Cookies Home Tab only to uninstall it a few days later cause it really slowed the phone down. I also installed BSB Tweaks which also did nothing but slow the phone down as well.
So for the last three weeks or so, the phone has been ok speed wise. Upon turning the phone on, it takes almost four minutes for me to be able to open the phone and make a call. I can open the phone, select a contact and hit send, but it won't actuallyt dial for about 3-4 minutes. Very Very annoying. Now as of ten minutes ago, when I wake up the device and slide the unlock, it goes to the start menu...well sort of.. This is kinda hard to explain so I'll do my best....
Instead of the phone going to the normal HOME screen, it says START in the upper left corner and has an X in the upper right corner, however, it still displays the lock screen wallpaper and the slider to unlock is stuck either left or right (whichever way I slide it.) If I tap the X in the upper right, it brings me to the HOME screen. Now if I push the windows key or tap START, it does the same thing as when I try to unlock it only I have an unresponse HOME screen displayed. If I tap the X in the upper right, it closes the START menu that it thinks it has opened and I can use the HOME screen again. Basically now I can't use my programs!!! WTF. The only programs I have installed other than what came with it are CHT editor and Visual GPS. Sorry for the long post but I'm really frustrated here and hope someone can help. I tried SOFT reset a few times and I don't want to do hard reset because I can't back anything up right now being unable to access any programs at all. Thanks in advance.
Joe
Did a soft reset one more time. It seems to be now, that the area where the battery indicator, signal strenght and volume adjustment are, are now unresposive. Everything else works fine except that one tiny little spot of the screen. I can now access programs again. If I use Opera and rotate the screen, that top portion, which is now the side, works fine. So it has to be something related to the notification bar. Any ideas????
Joe
Backup what you want to keep and do a hard reset. I've had my HD2 since the first week of April and have been using Co0kies Home Tab since 1.7 came out without the problems you have. Start fresh and see if you have the same problems.
Try to disable Sense to see if you can access your apps so you can back up what you need.
hard reset time.
install a custom rom man, my hd2 was exactly like that and that fixed it up good!
edsonbarron5 said:
install a custom rom man, my hd2 was exactly like that and that fixed it up good!
Click to expand...
Click to collapse
Have a browse over at the custom ROM forum, look up how to install HSPL onto the device, pick a ROM from the many threads and flash a new one. They are far far faster, they have no unnecessary programs on them and they go like a rocket.
If you get stuck come back here and I or someone else will endevour to help you out.
I would post some links to the downloads but I am on the HD2 on an EDGE connection at the moment.
Let us know how you get on.
If you are going to flash a custom ROM, you might want to go to the T-Mobile USA HTC HD2 section of the forum as you probably have a T-Mobile USA HD2. All the ROMs in that section should be compatible with your device while some in this section will brick your phone.
you dont need a costum rom to have a smooth hd2...
i've got the stock 1.48 rom..and i'm pretty happy with it..
i think a hardreset will redefine your htc-experience
and yeah: i'm running cht since 1.6 and had never such problems...
DN41
Thanks for the everyones input. I don't get online to much because I work two jobs so I just checked this thread today. The screen completely went out on me 20 minutes ago. The touch doesn't work at all. I tried soft resetting it and leaving the battery out for a while to no avail. I am going to the shore tonight and plan on checking out the ROMS when I get there tonight. Im willing to lose whatevers on the phone at this point just to get it running properly again. I'll post back with my results or if I have any questions. Thanks again to all who responded.
Joe
Ok so I got impatient and didn;t want to drive to the shore without my phone just incase there was a problem. I did a hard reset and my screen is still unresponsive. Im guessing the phone is shot???? What the heck could have caused this. The last few days when it became unresponsive I just removed and reinstalled the battery and it would work for a few hours. I figured it was software related but I guess it must be hardware related. Any ideas????
Joe
try it for a few hours WITHOUT the sd card plugged in...see how that fairs and lets us know.
I left the battery out of it all day (about 17 hours) and when I put the battery back in and turned it on I still got no response fromn the touch screen. All the buttons work though. I'm gonna take the SD card out and leave it on overnight tonight and try it in the morning. Im really upset that this phone has started to slowly fall apart on me.
Joe
beavisboots said:
I left the battery out of it all day (about 17 hours) and when I put the battery back in and turned it on I still got no response fromn the touch screen. All the buttons work though. I'm gonna take the SD card out and leave it on overnight tonight and try it in the morning. Im really upset that this phone has started to slowly fall apart on me.
Joe
Click to expand...
Click to collapse
What the other poster meant was to try and use your phone without the sd card in it.
If the sd card is failing then it will cause problems on the phone.
Left the SD card out of the phone with it on for over 24 hours. Still no response from the touch screen. All the buttons still work. My only guess at this point is that the Digitizer must have failed. Anyone know where I can get a OEM digitizer for a good price? It looks like ebay is around 60-70 bucks.
Joe
17/9/2010 EDIT: With a lot of feedback from this thread and other threads, it has come out that, waking up the phone with the YES/CALL/SEND green button is BETTER than waking up with the NO/END/POWER red button for SOD reasons.
----
Hello guys,
You probably know I am actively in the Android HD2 porting community.
I am having the strangest touch screen problem. I am really experienced into winmo and android stuff. Please read carefully.There is a surprise at the end.
BOTH under Android AND Winmo my touchscreen works just fine after bootup.
It first started like this:
At first my touchscreen stopped responding when I hold no button to make a reboot/power off. I thought it was from the usual Android touch screen freeze related to g sensor. Then I realized that it was the same in Winmo! Holding no button ALSO caused touch screen to die even under winmo.
Then it started loosing touch after sleeping. My touch is ALWAYS working when I boot winmo OR android and works for hours if not put to sleep. But it stops working after putting it to sleep.
Frustrated,
I restored with spb backup. Didn't work.
I reflashed my winmo rom. Didn't work.
I made a hard reset. Didn't work.
I removed sd card. Didn't work.
I removed sim card. Didn't work.
I changed the date. Didn't work. (this was a strange fix for some blackberries)
I flashed original 1.66 Turkish rom, 2.07 original old radio, even original 1.42 SPL which makes this hd2 fully stock the day I bought it. Even made another hard reset. Still didn't work!
By this time it's obvious this is a hardware problem and needs warranty.
OK
THEN I FOUND THE STRANGEST THING:
If I wake up the phone with ANY hard button other than the NO/HANGUP button touch screen WORKS!!! (Yes/Send button under Android)
BELIEVE ME, I HAVE TRIED FLASHING REFLASHING RESETTING AND TESTED 100 TIMES and YES it is ALWAYS the same. This is not a random thing.
If I wake up my phone with No button under ANDROID OR WINMO, my touch doesn't work. But if I wake up with back button windows button home button yes button, the phone wakes up properly AND touch works. Android of course doesn't work with the original radio, so I wasn't launching Android with the last test.
HOW IS THIS POSSIBLE AT ALL?? It looks like hardware fault, but touch loss IS related to NO button!
I will send my phone to warranty anyway but it will happen after the holiday (not before mid september)
IF ANYONE have an issue like this, PLEASE post.
I just want to make sure this issue isn't related to Android porting. If it is, this might be an important info. Maybe it may help devs fixing the general touch screen and wake up problems. Also everybody TRY waking up Android with the yes/send button to see if it helps with your wake up or sod issues and provide feedback. Also it may help with the phone not responding after hangup in Android. There is something hardware going at the background with the no/hangup button. I know this issue is hardware fault but still may shed light to our problems with touch screen and wake up issues. Maybe there is something hardware or firmware inside the phone waking up the digitizer. I know that hangup/no/end button is internally different than the other buttons, something like it shares the power button function that is usually on the top of the device with other htc devices. (Mine is a european hd2 and the hangup button is not red) I also wasn't using an overclocking kernel.
Please think twice before posting, and don't post anything useless. I am absolutely no noob, you can search my previous 200+ posts. I wouldn't post anything unless I am definitely sure. And I have a feeling that this thread has the potential to help or make something come out. If it doesn't, no harm done.
since most of the time inwinmo or android the no or yes button pop up generally on the same side in both os's and , taking in consideraton it might be a hardware issue , i would say you issue might be a harsware issue undr the screen when you touch no...wild guess
I was the same problem.... but it is even worst for me now...
Before, at least work touch others buttons... now my touchscreen DON'T WORK. :-(
I suppose that it's a hardware problem :-(
memin1857 said:
Hello guys,
You probably know I am actively in the Android HD2 porting community.
I am having the strangest touch screen problem. I am really experienced into winmo and android stuff. Please read carefully.There is a surprise at the end.
BOTH under Android AND Winmo my touchscreen works just fine after bootup.
It first started like this:
At first my touchscreen stopped responding when I hold no button to make a reboot/power off. I thought it was from the usual Android touch screen freeze related to g sensor. Then I realized that it was the same in Winmo! Holding no button ALSO caused touch screen to die even under winmo.
Then it started loosing touch after sleeping. My touch is ALWAYS working when I boot winmo OR android and works for hours if not put to sleep. But it stops working after putting it to sleep.
Frustrated,
I restored with spb backup. Didn't work.
I reflashed my winmo rom. Didn't work.
I made a hard reset. Didn't work.
I removed sd card. Didn't work.
I removed sim card. Didn't work.
I changed the date. Didn't work. (this was a strange fix for some blackberries)
I flashed original 1.66 Turkish rom, 2.07 original old radio, even original 1.42 SPL which makes this hd2 fully stock the day I bought it. Even made another hard reset. Still didn't work!
By this time it's obvious this is a hardware problem and needs warranty.
OK
THEN I FOUND THE STRANGEST THING:
If I wake up the phone with ANY hard button other than the NO button touch screen WORKS!!! (Yes button under Android)
BELIEVE ME, I HAVE TRIED FLASHING REFLASHING RESETTING AND TESTED 100 TIMES and YES it is ALWAYS the same. This is not a random thing.
If I wake up my phone with No button under ANDROID OR WINMO, my touch doesn't work. But if I wake up with back button windows button home button yes button, the phone wakes up properly AND touch works. Android of course doesn't work with the original radio, so I wasn't launching Android with the last test.
HOW IS THIS POSSIBLE AT ALL?? It looks like hardware fault, but touch loss IS related to NO button!
I will send my phone to warranty anyway but it will happen after the holiday (not before mid september)
IF ANYONE have an issue like this, PLEASE post.
I just want to make sure this issue isn't related to Android porting. If it is, this might be an important info. Maybe it may help devs fixing the general touch screen and wake up problems. Also everybody TRY waking up Android with the yes button to see if it helps with your wake up or sod issues and provide feedback. Also it may help with the phone not responding after hangup in Android. There is something hardware going at the background with the no button. I know this issue is hardware fault but still may shed light to our problems with touch screen and wake up issues. Maybe there is something hardware or firmware inside the phone waking up the digitizer. I know that hangup/no/end button is internally different than the other buttons, something like it shares the power button function that is usually on the top of the device with other htc devices. (Mine is a european hd2 and the hangup button is not red) I also wasn't using an overclocking kernel.
Please think twice before posting, and don't post anything useless. I am absolutely no noob, you can search my previous 200+ posts. I wouldn't post anything unless I am definitely sure. And I have a feeling that this thread has the potential to help or make something come out. If it doesn't, no harm done.
Click to expand...
Click to collapse
BIt strange this one to be honest I think it may just be your device as there are now hundreds of users of android on the hd2 and this is extremely rare. Hopefully a dev will look into and find a possible solution but I doubt it. If I was you I would put it back to stock and send it off to HTC for a new one. Even if a dev manages to find the problem you will have a new or as new hd2
I have been trying and I must say that I sort of do share your experience. The most left button (referred to as yes) awakes the phone just right as where the most left (No) takes its time to start the phone. I haven't had any noticable touch issues that could be related to these hard buttons yet.. (I think)
But I do think you have a point.
Interesting, I had something similar. I was using elegancia rom v1 for the longest time, with all my android builds, no problems. Then I went to chunkydroid rom, and had a few issues, with multiple android installs (one of which was my original that was working before.)
Then I rebooted into chunkydroid, (windows), and had the same issue. It was strange. I tried a few other roms, same problem. Turned off the phone, next day, reflashed chunky again, and hyperdroid 1.1, no issues since. (Only difference, which I don't know if it's related, but again, might help, is that I was overclocking. I have since not let anything go above 998 in setcpu, and even removed all builds that were overclocking. I though it might have had something to do with it (and the phone wasn't warm at all.)
I have not been able to duplicate the problem since though (even with overclocking just to see). So I'm pretty stumped. I'm sure the devs will work it out.
I have taken to pressing the yes/send key to wake up my phone as it seems more consistent than pressing the end key. My theory is that multiple wake up/sleep messages are being sent on the end key and the system gets confused. Some sort of debounce might help.
Just my thoughts.
Running shui8 realstock rmnet with micyprima r9.
It seems waking up the phone with the Yes/Send button somehow seems better with current builds and kernels.
I am asking everybody reading this thread to try waking up their Android devices with the yes/send key and share their experience if it is making their Android wake up quicker with less SODs.
Note: I am still using yes key wake up as a workaround for my hardware touchscreen fault. Still absolutely works everytime. I found out that if I accidentally try to wake up with the no/hangup key I need to wait about 10-15 seconds before yes/send key does its magic again.
well, i tried there is absolutely no difference between any hard button. if i have sod, none of them solves... actually its not sod i think, when you try to put standby and wake up several times quickly, screen stops responding for a while. you need to wait at least 15 seconds between each standby and wake up. can i fix this? or this is the sod?
Waking up with the yes/send button would not make any difference if your phone can wake up good with the no/hangup button already. But we are trying to find out if yes/send button wakes up better in long term usage. (no/hangup button sometimes can't wake up and that is the sod refers to)
SOD happened to me few times too with the NO/Hangup button and if/when that happens, if you press NO/Hangup button for long(for the menu with the turn off the phone,reboot,plane mode,...etc options) screen comes back BUT sometimes it locks the screen brightness to lowest possible setting(with %0 actually it doesn't completely turns off as you know).
Other than that "bug" NO/Hangup button works fine for me but as the OP, YES button is more stable and no SODs happen with the YES button...
Btw there is no difference for me YES button vs NO/Hangup button by means of quickness... Both works the same speed unless of course there is no SOD with the NO/Hangup button...
Just wanted to share my experience...
This thread is awesome
Thanks for this thread. I have been trying to use any android build for at least a full day with no success. Ive used different winmo roms and radios such as chucky and miri roms. I still ran into sod's. After waking with the yes/button i have had no sod issues since then, Once again awesommmmmmmme thread.
After some time my digitizer died almost completely. (Issue became worse) It is currently being handled under warranty. (digitizer is replaced)
But at least with a lot of feedback from this thread and other threads, it has come out that, waking up the phone with the YES/CALL/SEND green button is BETTER than waking up with the NO/END/POWER red button for SOD reasons.
any solution to this issue yet because i just started having this exact same problem w/ my HD2 yesterday before that it was perfectly normal and all the suddon the Power/END/NO button wake up cause the screen to not respond to the touch at all however wake up w/ home,back,menu,call button the touch screen works is back to normal
still can't figure out if its a hardware or software problem cause i also tried flashing bunch of roms/radios/and android roms as well and even went back to stock rom in hope for a solution
waking with green is about 2s faster for me.
Same thing happens to me before 2 days.I tried many hard resets,roms,radios and my screen didnt work.I couldnt even login in wm.
My screen was completely dead.The last thing i did,before my screen goes unresponsive was to push no/hangup button in android to open it
At first also i thought it was a g-sensor issue,but then realise that it was much more than it.
Until the moment i read this thread
The way it worked for me
I open the device with no button of course,made a soft reset from red hole and i wait until the device goes to standy itself.Then i open it from send button and voila touch is back !!!!
Strange thing but it works.Thank you very much you are a genius
sure the touch comes back when it wakes up using all other buttons except the power/end button so why is that all the sudden the power/end button causes the screen to go unresponsive
like for say when i hold the power/end key to open the pHONES OPTIONS in windows or android once the PHONES OPTIONS shows up and i try to click on power off or reboot on the screen the touch doesn't respond so the only way to reset or power off the device completely is the either use the reset button in the back or pull the battery out
i'm going to be sending it under warrenty/insurance to t-mobile and hopefully get a replacement cause i'm so use to the power/end button to wake up my device...
Guys be extremely carefull when using hard buttons in android.Finally my problem with screen is not the end button but the back arrow button.This button is necessary for using android and i have pushed it many many times the last months as i am using android.Νοw every time i pushed it my touchscreen stops responding.Τhe last time i pushed it my screen stopped responding(i thought for ever) and didnt knew the exactly reason that this happens.Because i didnt want to send the device to htc (firstly i must send it to expansys in france and they will send it to htc) and take it back at christmas i decided to go to a local mobile service.I wasnot mind for warranty cause i wouldnt be able to live 4 weeks without hd2.I was ready to give 600euros to buy desire hd
Result from service
At firstly he said to me that hd2 have no touchscreen problem and it works ok
I paid 20euros for opening the device and took it back.At first 5 minutes my screen stopped responding again and didnt knew the reason.For my good luck i leave the device untouched 10 minutes and the screen come back again.Then i used it and the time i pushed the back button the screen stopped working,fortunatelly for little seconds.Now i know.My screen stop responding when i push back button.So i change the keylayout to my android build and now i push send key instead of back and volume up key for menu and volume down for power on-off and hd2 works perfect after 24 hours without touching the back button
Also in monday i will go to service again to fix the button problem
Same issue with me
Exactly same issue with me. I have been using Winmo and Android on and off in my HD2. couple of weeks back, touch didnt respond after waking up the device from standby by pushing endkey.
tried everything - flash/stock rom/removed SD card/ hard reset/clear storage/custom rom/ battery pull out etc...
touch worked suddenly and only when i slightly touch the end key instead of pushing it fully, the start menu opened..this happened for few days and when ever i push the end key...screen goes unresponsive. all other hardware buttons are working fine and if at all i push end key the issue starts.
unfortunately my friend pushed the end key once and the screen never responded after this....now am using my old p3450 htc touch...
i think if we change the AP BOARD (Flex ribbon-keyboard chip) everything will go back to normal coz its not the problem with digitizer or the lcd of the software for sure.
trying to order one in ebay, we can change this ourselves...no need to send it to service centers and waste money on it.
if any of you have done this already...let me know if it worked for you.
guys dont know if it is allready known but there is a app called sidebar style swkey
http://forum.xda-developers.com/showthread.php?p=9726110#post9726110 which puts software buttons in the screen.This app is definitely button saver
this is a new problem for me. I have been using the most recent Dutty ROM together with Mdeejay Android ROM without any problems. All of a sudden, when I try to unlock the screen after STANDBY, it just wont register my touch, as if I am not touching it. It boots up fine, and on the first unlock works fine, but when the screen lock goes on again (after every standby) it just wont unlock. So I am stuck (I use Exchange and our policy forces the lock after standby, so I have to use it - and its worked fine for ages).
If I boot into Android, it works fine, the unlock works fine, yet strangely when I try to shut the power down, THAT screen also doesnt register me touching it.
I have hard reset but even before I load an app or do anything, the problem exists.
I also reflashed a DUTTY ROM. Same problem.
I tried CHT lockscreen - same issue. After Standby, screen doesnt register my touch.
Anyone have any ideas?
Same problem for me.. Restoring a backup image after being forced to hard reset this morning and now suddenly my HD2 won't wake up after sleeping. Pressing my end key only lights up my buttons but I have to pull the battery to reset. I'm thinking it's related to me having CHT installed, yours however might be a different problem.
I had something similar. It was right after I had installed CHT 2.0 and was looking to make the top and bottom bars transparent. I found a cab that claimed it would do this and installed it. Sorry, I don't recall what cab it was and I have deleted it. When I rebooted Sense would hang and if it got into a lock it would only move the slider a little where it would stop. Luckily, I had done a backup that morning right after I installed CHT 2.0 with Sprite so I restored and all was well.
I don't know if this is of help but I figured I'd throw it out there.
it wakes up, but wont register when I try to swype the unlock screen.
ekerbuddyeker said:
it wakes up, but wont register when I try to swype the unlock screen.
Click to expand...
Click to collapse
Your lucky you get that far lol.. I don't get any waking up. Plus I now uninstalled S2U2 and still no change. Disabled all locks of any kind and still frozen with sleep of death with in 1 min of hitting power to sleep it. I REALLY don't want to to a hard reset and install everything from scatch.. UGH.
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
bump this is horrid
same
im having the exact same issue. I have flashed 3 different roms and flashed to the newest radio (2.15).
I started out using energy rom, didnt help. Flashed a newer energy rom, didnt help. Now im using the dusk rom, same issue.
SOMEONE PLEASE HELP!!!!
It's a quite common digitizer problem lately... it seems the HD2's digitizer is failing on some units, possibly because of usage with android? my father's device acted the same way, only it sometimes did register touch and other times, not.
My device doesn't have these problems, yet. But seeing that a lot of people here are experiencing these issues, and with the notion that I use android pretty much all the time since I first booted my device, i'm pretty sure i'll experience it soon as well..
Make no confusion thou, the assumption that android effects the digitizer are purely my own thoughts on this matter, no such thing has been proven and the conclusion that android is effecting our HD2s is based purely on the statistics of touch screen failures in the last few months since android has been made publicly available in a working form.
EDIT:
Those seeking A solution, as far as I know, the only solution is sending your unit to HTC for repairs, you'll get it back with a note that says that they replaced your digitizer or your screen, at least these are the reports I heard from the other folks whom followed this procedure.
Good luck.
HTC HD2 Screen Lock
I have only used Android a few times on this 'phone and it has a standard HTC/O2 ROM installed so it must just be a problem with the top part of the digitiser. With android running the unlock is at the bottom and is unaffected.
Is there any way of testing the digitiser before deciding whether to get a repair sorted,
Ta,
link:
htcphones.net/htc-hd2-problems-with-touchscreen
short version :
change digitizer
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
A friend was complaining to me about something like this since last week. I could not figure it out so I went ahead and installed Android cm7 and still have the same issue.
Until I read this post after searching through the forums all over Screen now unlocks perfectly fine but only using the green Phone icon. If I try to wake the screen with the red Power button, the screen is unresponsive.
Thanks for the info.
Already happened tome its a hardware issue can't be fixed so if you still have warranty on ur phone send it to htc for repairs b because it tends to get worse n worse soon other keys will start to give in I think that's one reason why most android phone been switching to capacitive buttons because hardware causes this sorta issues and send it in for repairs to get it fixed
Sent from my SGH-T959 using XDA App
the same issue with me , is there is any solution for that .
Wakeup the phone using the send button.it will work
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
had same problem, found a FIX
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
tidygrant said:
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
Click to expand...
Click to collapse
well i have woke up this morning to be able to unlock my device to then locking it and not being able to unlock it again!!! i had notification to say it had managed to restore 16 apps whilst i had been asleep so i am thinking there is a dodgy app out there some were
mazdarider23 said:
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App
I have this problem and have found no way to fix it, I have tried everything except possibly going to the clk loader instead of magldr. when i put the phone to sleep with the power button is when i have the issue of not being able to unlock my phone in Android. I have tried task 29, going back to original windows roms, sd and nandroid, it is a hardware issue related to the digitizer as far as I'm concerned. I love my HD2 and really need to fix or find another one. I know this doesn't help, but maybe a little more insite if nothing else
I had the same issue. With my 1st HD2 it started as an intermittent problem, then eventually completely stopped working. With my replacement it just started to happen again. I immediately flashed back to stock tmo windows and the touchscreen would work so long as I did not try and put the phone on standby or wake the phone using the end key. If the phone went to standby on its own, the touchscreen would not work either. I changed the settings so that the phone would not go into standby at all. I then learned that locking the phone from the windows menu and allowing it to go to standby that way somehow averted the touchscreen problem. After 2 days, the problem seemed to resolve itself, almost completely. If I try and wake it using the end key, the touchscreen still wont work, but every other button on wake works. Also, putting it in standby with the end key seemed to not cause the problem any longer.
I dont know if the issue varies per person, but what worked for me was going to stock windows for a couple of days, then starting over with android. I guess it depends on how far along the problem has progressed.
Look at my thread in my Sig about the Unresponsive Screen Solved. This sounds exactly as that. And there are various workaround solutions through out the post.