[Q] Quick question regarding firmware + - Galaxy Tab General

Hi,
I recently flashed my galaxy tab but i was wondering if anyone can tell me how it is possible to find out the firmware i flashed is the non modifiable ones from samsung (newer ones) or not?
also, the WIFI network in my office requires manual IP config which is not a problem, but is there any way that it automatically switches between manual/auto config depending on the wifi ur on?
for instance, at home it uses auto IP, so do i have to manualy goto advanced setting and untick the box?
Thanks for any advise, greatly appreciated!

oh.. here are my device info
Baseband P1000 JXJM2
Kernel 2-6-32-9
root(at)mea04 #1
Build number froyo(dot)jpjm3

anyone could shed some light?

Related

[Q] CM9 Correct Baseband For India

Hi all, I'm new to this so go easy please!
I am travelling in India and cannot get a data signal, only normal calls/texts.
Can you tell me which baseband I should select from the baseband switcher in advanced settings (Defy Parts)? I don't see an option for India...
I am running Eppy's CM9 13-Jun-12 & CM7 Froyo Kernal.
Thanks in advance.
Select southeast Asia 3.4.3-331. If the settings doesn't persist, then install bbswitcher(you can find the thread in dev section) and use that baseband. Enjoy.
Sent from my MB526 using XDA App
Thanks, tried both, but with no luck, also tried other southeast Asia baseband's and China baseband's without success...
Any other ideas?
Sent from my MB525 using XDA
Default cee-europe also works actually. Are the settings persistent, did you try installing baseband switcher?
Sent from my MB526 using XDA App
Yes tried the baseband switcher app also. What do you mean by are the settings persistent?
I also tried a full wipe, flash sbf & reinstall CM9 with latest 13-Jun kernel, still same problem...
Sent from my MB525 using XDA
Baseband Switcher V 4.1 | Signal intelligent monitoring
This version support show the dBm asu to you.
THIS Baseband solve u r problem
1. Support English well.
2. Adjust the layout file
3. Add Tab icon and un-selected effect of selected effect
4. Add some new baseband config
5. Optimized code for each module
6. Modified the execution order and the interface
7. Adjust the configuration of the prompt box displays, more intuitive
8. Add Confirm boxes to prevent misuse verification.
9. Adding real-time display the current signal strength to facilitate the players view
10. When the baseband is not displayed when the unknown is identified
11. When a user accidentally deleted the baseband configuration, the assistant can provide the baseband recovery.
http://forum.xda-developers.com/showthread.php?t=1203297
use china 850Mhz/2100Mhz baseband...it works
International 900/2100 works for me
in the list select " International" mode it works for me..
green.jersey said:
Hi all, I'm new to this so go easy please!
I am travelling in India and cannot get a data signal, only normal calls/texts.
Can you tell me which baseband I should select from the baseband switcher in advanced settings (Defy Parts)? I don't see an option for India...
I am running Eppy's CM9 13-Jun-12 & CM7 Froyo Kernal.
Thanks in advance.
Click to expand...
Click to collapse
It depends on your provider. what provider are you using?
Thank you for the replies everyone.
Unfortunately I have tried all of the suggestions and I still can't get the data connection to work.
My provider is T-Mobile UK. Perhaps they are blocking the data connection? I've never had a problem in other countries though...
Than its not your baseband. Contact your provider.
Defy baseband query
Hey folks,
I have changed the baseband selection option to South East Asia 3.4.3-331.
After this I am getting dedicated mobile network without any disruptions.
But unfortunately after this change when I accept any incoming call or make any call then I am not able to talk(The other person is not able to hear me and I am not able to hear another person voice).

[Q] wifi hotspot on galaxy s4 gt-i9500

hi guys
I have an s4 i9500 and would like to know (sorry the ignorance) if on this set i can have hotspot for regular wifi connection and not only with network connection.
When i try to create a tether setting the phone automatically shuts the existing wifi connection.
Is there a driver that will allow to create an option for hotspot on wifi. I saw a video that creates something similar on a 9505 odexed. my issue is is there such a file for the 9500, also i believe i saw a file but for a very old rom version. Currently i am running i9500xxufna6 on android 4.4.2
the file i saw was for an older android version and i am not sure it would work on 4.4.2
Can anyone point me in the right direction, i need to tether my tablet to the phone but i want to use my home router rather than my phone company.
Any help will be greatly apprecited
thanks

[Q] i9505 only getting G/E in mobile data indicator

hi guys im a new android user. i bought my i9505 galaxy s4 3 weeks ago and everything is working perfectly except the mobile data. i can only connect to E/G signals with it (which doesnt really do anything because i cant even check emails). its on LTE/3G/WCDMA/GSM(automatically) setting and the APN is the correct settings with the carrier in my country(philippines). i tried my sim on a different i9505 phone and it was able to connect to 4g so i guess the carrier/sim being the problem is ruled out. i have restored to factory settings/rebooted multiple times and am still unsuccessful. the phone's IMEI is not blacklisted or banned and it is intact(dont really know what that means but it shows a long series of numbers and im not really sure its safe to post it here). My carrier also supports the frequencies listed on what the phone has. i have not installed any custom firmwares and have not re installed any official releases.
i would really appreciate it if someone can help me fix this problem. could it be a software problem or a hardware problem(praying it isn't)?
my phone specs are
GT-i9505 samsung galaxy s4
android version:4.3
baseband:i9505XXUEMJ7
kernel version: 3.4.0-1765174 [email protected]#1 tue oct15 16:14:54 KST
Build number: JSS15J.I19505XXUEMJ7
SELinux: Enforcing SEPF_GT-I9505_4.3_0010
if you need me to put any more info just tell me
Go Settings > More networks > Mobile networks > Network mode > select WCDMA

[Q] No signal

Hi all,
First of all, I have a Samsung galaxy s4 from Canada specifically from Rogers. I have got it hardware unlocked, rooted and I am on Cyanogenmod 11.
Now to my problem, I am in the Philippines and I would frequently lose signal, if I'm lucky, it would re-aquire the signal but most of the time, my work around is to turn airplane mode on and off and it would connect back to the carrier for maybe a minute and fully lose signal again.
Any help or suggestions would really be appreciated as it is such a pain to airplane mode and off when I'm jamming to my BT speaker
Here's information about my phone:
Model: sgh-1337m
Cyanogenmod version: 11-20150309-nightly-jflte
Android version: 4.4.4
Baseband version : 1337mvluamdj
If i could help you guys, help me with my problem just let me know.
Thanks all for reading.
Signal issues are mostly connected to the modem,
Flash the right modem for your phone/carrier and see if it help
GDReaper said:
Signal issues are mostly connected to the modem,
Flash the right modem for your phone/carrier and see if it help
Click to expand...
Click to collapse
Hey, thanks for the reply!
I'm a little new to this, could you go in depth on how to do so. Or maybe direct me to a few links I could follow? I am not in Canada and this is my only phone, so I don't want a chance to brick it.
Thanks!
Edit: do I need a computer to reflash the modem because that is something I don't have at the moment.
Here is a modem list. It also has a guide on how to flash.
There was another thread that included the latest lollipop modems , but I can't find it anymore.
You will need Odin which means that you require a PC.
Go to sammobile.com and check what version you need for your carrier and country

[Q&A] SHV-300S: Change broadband

Hi,
I am currently using a SHV-300S. Using the Omega Apps I changed my baseband/modem from E300SKSUANI1 to E300SKSUANA7. Now for every new WIFI network I will have to reset, and thus reboot, the cellphone before log in the new WIFI network. So now I want to revert back to E300SKSUANI1, but I dont know how to do. Omega only provides a list of available baseband and does not allow restoration of original baseband. Anyone plz help!

Categories

Resources