Hi everyone, im from Malaysia and im kinda new in this flashing business.
However, i just bought my tab from Singapore. The following is my tab details:-
PDA: P1000DXJJ1
PHONE: P1000DXJJ1
CSC: P1000OLBJJ2
Somebody please kindly advice me if i have to upgrade my current firmware and which version would be the best for me. Because i have seen so many different version of firmwares available in samfirmware but im not too sure which is the best, also worrying about the warning from mr.chainfire's thread.
Currently, im considering jj2,jk2,jm4, and roto jme but still not sure which one of it would benefits me the most. Please do let me know your opinion upon of my queries. I would really like to know if i need to upgrade or not. And, does the firmware upgrade would bring up the optimized performance to my tab?
Your answer will be very much appreciated.
Thank You in advance.
Best Regards,
TabFans.
fai2start said:
Hi everyone, im from Malaysia and im kinda new in this flashing business.
PDA: P1000DXJJ1
PHONE: P1000DXJJ1
CSC: P1000OLBJJ2
Click to expand...
Click to collapse
Roto JME is a good choice, the overall speed of this version have much improvement than stock one, and Roto had removed the proteceted bootloader issue from his ROM.
only one thing to remind, do backup of original rom or at least copy the /system/csc and /efs to ur computer. These are the region code and the IMEI of ur tab.
Related
So, I have confirmed that the "sdcard" in my SGS is dead. Bell is happy to send it in for repair, but don't have an original Bell firmware on the phone anymore, and I'm concerned about warranty support.
The phone is unable to boot, so I can't use the Kies app at all.
I am able to flash no problem using Odin, but I don't have a source for an original Bell 2.1 ROM to use with Odin. All the stuff I can find has strange filenames (things that don't obviously go into the blanks in Odin).
I'm a relative noob (obviously), but if someone would give me a hand getting a 2.1 Bell FW flashed, I would really appreciate it.
go to sams firmware and download JH2
that's the original stock ROM for Bell
hey!
I am in need of these files too.
Could someone instruct this noobie on how to obtain these files?
My phone randomly softbricked after i listed to the music and i lost my recovery mode along with it (however, i got download still yay!)
I am somewhat familiar with Odin due to the youtube video and tampering with it, but i cant seem to locate the Bell vibrant files i need.
My computer is already updated with samsung drivers and is basically ready to go.
AllGamer said:
go to sams firmware and download JH2
that's the original stock ROM for Bell
Click to expand...
Click to collapse
You would'nt happend to know the password for this file eh?
I've tryed samfirmware, samfirmware.com but to no avail :|
Also, can I take an image of my current rom with Odin? Is it the "File Dump" option?
password is samsung-firmwares.com
i'm looking for the original firmware of vodafone germany..
anyone out there who knows where to get it?
on my phone is:
pda: i9000bujm4
phone: i9000bujm3
csc: i9000gvd2jm3
but i've done an update via kies. so i'm searching for the previous version..
steinii said:
i'm looking for the original firmware of vodafone germany..
anyone out there who knows where to get it?
on my phone is:
pda: i9000bujm4
phone: i9000bujm3
csc: i9000gvd2jm3
but i've done an update via kies. so i'm searching for the previous version..
Click to expand...
Click to collapse
Hi german cousine!!
I looking for an original vodafone rom similar to your.
PDA: i9000bujm4
PHONE: i9000bujm3
CSC: i9000gomnjm4
Can, someone of you guys, help me?
(actually this brand rom is a 2.1 android).
Thanks
Hi All,
Hope this is the right forum for this, but I was wondering if anyone has had any experience on loading the ROTO JME Firmware onto an Optus Tab, and if so, what were the improvements and were there any traps to watch out for considering the carrier lock?
I had a quick look through the ROTO JME Forum, and can't see much specific.
Regards,
bvd81
I have roto jme on the opus tab. One of the first things i did was remove the carrier lock (now works with three and telstra sims) search on this forum for info
I went straight from stock to the jm series firmware and its much much faster now just write down your internet and mms apn details as mine were wiped when upgrading.
Also if you use the optus apps make sure you only use roto upgrade package or it will wipe them.
Sent from my GT-P1000 using Tapatalk
Hi Ghostwalker9
Can you pease tell me how you flashed that ROTO JME to the Optus Tab?
I tried using Odin, but I guess it only recognises the Samsung Tab, so do I need the full version of clockworkmod?
Also, did you solve your optus sim problem with the JRE ROM?
Thanks
Greg
gregbull said:
Hi Ghostwalker9
Can you pease tell me how you flashed that ROTO JME to the Optus Tab?
I tried using Odin, but I guess it only recognises the Samsung Tab, so do I need the full version of clockworkmod?
Also, did you solve your optus sim problem with the JRE ROM?
Thanks
Greg
Click to expand...
Click to collapse
Did you install the usb drivers for the tab, and were you in downloading mode?
it should recognize the tab regardless of whats on it
Hi
Yep, had usb drivers installed, can access with adb. Not sure what download mode is though. Will research that one.
So when its in download mode should I use odin to flash the firmware?
Also, just so I'm clear when I say Optus Tab I mean the ZTE V9 tab that Optus has branded, not the Optus version of the Samsung Galaxy tab.
Thanks
Hey does anyone have the stock Optus (current) ROM backed up with all apn, sms, settings, if so please PM me with a link.
Thanks heaps
PEACE
Kosti
Optus ROM
Kostiz said:
Hey does anyone have the stock Optus (current) ROM backed up with all apn, sms, settings, if so please PM me with a link.
Thanks heaps
PEACE
Kosti
Click to expand...
Click to collapse
I would also appreciate such a link, as some initial glitch with Titanium backup caused me to lose some standard Optus apps prior to a Roto or Nandroid backup.
PLEASE: Take care if you try the batch option to "Integrate updates of system apps into ROM".
While I have no problems with all the great ROMs here, it would be good to go back to stock if I felt the need. Especially to finish off my initial Australian app subscription as I cannot find this app anywhere else.
Much appreciated if possible.
BTW: I am currently on Overcome v1.4.0 and like it very much. The Roto ROMs were also very good.
I'm pretty sure I've done a backup via titanium, but havent tried to restore from that, also i removed overcome 1.4 as thought i had wifi issues which when restored from OEM backup that OC1.4 performed it bricked it, so I had to use a full roto conversion which changed my modem & i assume pit as well.
Before (stock)
PDA : P1000XWJJ4
PHONE : P1000XXJID
CSC : P1000OPSJJ3
Build Time : 2010.10.16 20:35:06 KST
Changelist : 639474
Firmware 2.2
Kernel Version : 2.6.32.9
After roto rom
PDA : P1000XWJMI
PHONE : P1000XXJMA
CSC : P1000OXAJMG
Build Time : 2011.01.22 01:24:16 KST
Changelist : 869777
Hence why i want to bring it back to my OEM CSC & Modem if that's at all possible..
I cant even find the OEM ROM and Kies or Samsung Website?
Hi, I'm a newbie owner of the amazing GS2.. I had an Acer Liquid before.
I'm now planning to root my device and to flash a Mod Rom.
After reading around in the forum I'm a bit confused about CSC.
The last Italian stock should be:
I9100XWKE7_I9100XWKE1_I9100ITVKE5 (I downloaded it in order to restore the phone in case of needs)
but my phone is:
PDA: KE7
PHONE: KE1
CSC: KE4
I don't think the phone is branded, even if I bought it from vodafone I don't have any Branded App or Logo.
Kies says that the phone "can't be updated", so I should have installed the last stock Rom
So, why I have the CSC4 instead of CSC5?
Is it a problem If I want to to root the phone flashing "CF-Root-SGS2_XW_XEU_KE7-v4.0-CWM4"??
Is my phone going to switch from ITV (Italian) to XEU (European)?
Is it right what I'm going to do or is it completely wrong? (I'm not planning to brick my phone until november )
Thanks in advance
PS: If already exist a thread about this please post the link, I dind' find it
Hello,
i just bought a new Galaxy S2. UK version i believe.
i tried to update firmware to 2.3.4 but Kies says the device cannot be updated or something...
i have seen showthread.php?t=1075278 but i am confused which one i need...
here is some info from about phone:
Model number: GT-I91000
Android version: 2.3.3
Baseband version: I9100XXKF2
Kernel version: 2.6.35.7-I9100XXKF2-CL25304 [email protected] #2
Build number: GINGERBREAD.XXKF2.
Thanks in advance.
k1ng440 said:
Hello,
i just bought a new Galaxy S2. UK version i believe.
i tried to update firmware to 2.3.4 but Kies says the device cannot be updated or something...
Correct Kies = official firmware upgrades only .
i have seen showthread.php?t=1075278 but i am confused which one i need...
You dont need any but if you want the unofficial updates then KH1 is the latest in that post .
XXKH3 2.3.4 latest from Frankenstein packages that thread .
with
XEU CSC for UK
Your current firmware is KF2
jje
Click to expand...
Click to collapse
Thank you.
How do i make sure the phone is uk version?
UK on the side of the box >>>Product Code .
jje
sorry but its nothing there..
by default. uk keyboard and uk language was selected.
does it matter if i use?
http://forum.xda-developers.com/showthread.php?t=1182498
and
http://forum.xda-developers.com/showthread.php?t=1095274&page=1343
i heard they are good.
Your choice .
jje
you an expert person, please recommend me.
For a new user Cognition rom would be the starting point .
jje
Omg, i have installed them to my phone, now my phone battery is draining so fast. Please help me.
EDIT:
SpeedMod SGS2 + Lite'ning Rom v6.1 XXKH3
EDIT2:
i am also getting triangle on boot.
Please help me.
do a battery calibration before a battery consumption judgement.
I use LeoMar Revolution 2.6, it is a very easy to use ROM with lots of themes and you can flash it with his kitchen app.
the yellow triangle is for unsafe kernel, it is used for rooting the device. don't let it bother you
Thank you.....
can you give me link to LeoMar Revolution rom's thread?
i cant find it anyhwere
k1ng440 said:
Thank you.....
can you give me link to LeoMar Revolution rom's thread?
i cant find it anyhwere
Click to expand...
Click to collapse
I mean this sincerely - yes you can, you're not trying hard enough. "Search" is your friend. Please try again.
Thank you. i found it long time ago. i was just confused with Google custom search.
i didnt like LeoMar Revolution rom..
let me try Cognition rom
OR
go back to stock with speedmod kernel
Hello Guys,
i wanna flash my Samsung Galaxy S.
My question is which Firmware i probaly use for my phone?!
My phone-informations:
PDA: I9000XWJVI
PHONE: I9000XXJVO
CSC: I9000DBTJV2
I wanna flash with cyanogen.
I´m probaly a beginner in flashing, i never had flashed before.
Thanks
SoOoX said:
Hello Guys,
i wanna flash my Samsung Galaxy S.
My question is which Firmware i probaly use for my phone?!
My phone-informations:
PDA: I9000XWJVI
PHONE: I9000XXJVO
CSC: I9000DBTJV2
I wanna flash with cyanogen.
I´m probaly a beginner in flashing, i never had flashed before.
Thanks
Click to expand...
Click to collapse
since ur a beginner please go through the numerous guides on how to flash available here on the forum.still:use odin to flash with pc,cwm(root essential) to flash using the phone itself .flashing is a very easy process.so relaxand galaxy s has a very good reputation:its REALLY hard to brick an sgs..the worst thing that can happen is a boot loop which u can fix by reflashing with odin..cm9 ics 4.0.3 is stable enough for daily use.
I´m gonna using I9000XXJVU, it´s the last European Update
So, someone got a Thread How to flash ??
Would be nice with picutres and text