Is it possible just to flash a 2.1 rom from dk28 and ext or have to flash back to odin
Sent from my SPH-D700 using XDA App
I think you will have to go back to stock first. I don't think you can go from dk28 to dl18.
If you are currently running ext4, you will have to revert back to rfs file system. None of the DI18 based ROMs have ext4 support in the kernel.
Related
i have a nandroid of ji6. do i just apply that and flash a ji6 kernal? can someone link me to one if so? if not, can someone explain how to do it? thanks.
I believe you have to ODIN the official JI6 release (you can find it in the dev forum). Then you have to root, install ROM Manager, and nandroid your way back to where you were.
The key is to Odin a Rom, any Rom, that has the JI6 kernel.
Odin JI6 and then nandroid.
Nandroid doesn't install the kernel, so you would end up with a "brick" if you tried to nandroid on a 2.2 rom.
thanks guys! loving obsidian so far, but i think i need the signal strength boost from ji6.
Nope, I was on Obsidian and just flashed straight back to Bionic Fusion through clockworkmod recovery (straight, not through ROM Manager), and then Core kernel on top of that. I'm running perfect apart from slow market downloads (mostly my fault I think--accidentally deleted some system apparently and then restored; downloads work, but fussy)
Sent from my SGH-T959 using XDA App
that's because bionix flashes the kernal along with the rom. nandroid doesn't. that is why i asked if i could just flash the ji6 kernel after restoring my nandroid.
ATTN: Don't give advice if you don't know what you're talking about.
On to the post:
You can feel free to nandroid or flash to/from anything. However, if your Obsidian install is like many other peoples, you probably can't do crap in recovery. In that case, you need to Odin. However, if your recovery does work, just flash the rom and the kernel (or just the rom, if the kernel is included)
OK ill give it a shot if I decide I don't like obsidian. Thanks.
Sent from my SGH-T959 using XDA App
By can't do crap do you mean can't flash or can't access clockwork mod? (I can boot into clockworkmod just fine)
Sent from my SGH-T959 using XDA App
gonintendo said:
that's because bionix flashes the kernal along with the rom. nandroid doesn't. that is why i asked if i could just flash the ji6 kernel after restoring my nandroid.
Click to expand...
Click to collapse
Ah, sorry. I thought the issue was whether you have to ODIN back to stock in order to roll back from Froyo.
For me the safest was to ODIN JFD, then flash JI6.
Hey noob question here. I flashed the viper rom and I don't like it . How do I unflash it, as in make things back to normal.
The obvious answer would be use your backup if you made one. If not you can flash a different rom. If you decide to flash a 2.1 rom you'll need to flash a 2.1 kernel as well. If you want to go back to stock I would just odin back to stock. Instructions here:
http://forum.xda-developers.com/showthread.php?t=773032
except use the file from this post:
http://forum.xda-developers.com/showthread.php?t=794138
I would consider something like the acs dk17 because it's completely stable and it is essentially the same as a 2.1 stock rom but it has the capabilities of 2.2. Going back to 2.1 would (to me) be the same as using a stock dk17 rom like acs, which I'm using right now and loving. Two cents.
odin
Is there only one type of odin because the link you gave me for restoring had a broken odin download link. I see another odin download that's for the acs dk17 and was wondering if it'll be the same.
Yeah you can use the new odin. If for some reason that fails pm me and I'll give you the old version of odin.
Sent from the Fastest Phone in the Galaxy
Has anyone successfully rooted Pure Stock EC05? If so, using what?
One click root 2.5.5
Sent from my SPH-D700 using XDA Premium App
i'm ready to try 2.5
2.5.5 worked for me.
Same as eb13 and dk28
Sent From My Evo Killer!
Great news......Installing now.
Thanks
Where is it?
2.5 isnt working for me !!
same way that would be in the questions and answers forum?
2.5.5 says it was sucsesful, but i havent tried to use superuser or any root apps yet. seems ok though.
3.0.6 doesn't work for me. Hangs on Samsung screen after reboot.
1fun_animal said:
3.0.6 doesn't work for me. Hangs on Samsung screen after reboot.
Click to expand...
Click to collapse
That's for EXT try 2.5.5
So EXT won't work with EC05?
1fun_animal said:
So EXT won't work with EC05?
Click to expand...
Click to collapse
No, not yet
CWM 3.0.6 is for EXT. CWM 2.5.5 is for RFS. Official stock EC05 = RFS.
You should be able.to use cwm 3.0.0.6 if you flash an ext4 compatible kernel.
Sent From My Evo Killer!
1fun_animal said:
So EXT won't work with EC05?
Click to expand...
Click to collapse
Anything stock from Sansung is in the RFS format, only CWM 2.5 is RFS.
CWM3xxx is for converting RFS to EXT4, which a stock rom doesn't support, so, your gonna get stuck at the Samsung screen b/c a stock system doesn't know what to do with EXT. You'll have to use a custom ROM that supports EXT (almost all do now) to use CWM3 (or wait for someone to cook up a stock EC05 that supports both filing systems - someone usually does).
If I want to root and install a custom ROM over the official EC05 which OneClickRoot zip file should I use to convert to EXT4? I only see one for EB13 and DK28.
ext worked for me on ec05.... i flashed twilight kernel worked fine
like i said... use the one click for eb13 but you have to flash an ext4 compatiable kernel after you boot into cwm
I am a noob so I am learning. I rooted my epic yesterday and was wondering can you overclock on the stock eco5 rom (or any stock rom) if you are rooted. I used the ClockworkMod method described in qbkingg77 video. So my files are converted over to ext4. Thanks!
oldpreowner said:
I am a noob so I am learning. I rooted my epic yesterday and was wondering can you overclock on the stock eco5 rom (or any stock rom) if you are rooted. I used the ClockworkMod method described in qbkingg77 video. So my files are converted over to ext4. Thanks!
Click to expand...
Click to collapse
You need to follow his other video on how to flash a kernel and overclock it as you can't overclock the stock kernel
oldpreowner said:
I am a noob so I am learning. I rooted my epic yesterday and was wondering can you overclock on the stock eco5 rom (or any stock rom) if you are rooted. I used the ClockworkMod method described in qbkingg77 video. So my files are converted over to ext4. Thanks!
Click to expand...
Click to collapse
SetCPU it goes up to 1200 I believe.
Sent from my SPH-D700 using XDA Premium App
oldpreowner said:
I am a noob so I am learning. I rooted my epic yesterday and was wondering can you overclock on the stock eco5 rom (or any stock rom) if you are rooted. I used the ClockworkMod method described in qbkingg77 video. So my files are converted over to ext4. Thanks!
Click to expand...
Click to collapse
Ok, you cannot be on stock ROM because it does not support EXT4 file system. So either you Odin'd in a prerooted modded stock ROM or you haven't booted into Clockwork yet to convert to EXT4 and thus sponging your phone. You also cannot overclock the stock kernel. So if you are on CWM 3.0.0.6 and haven't gone into Clockwork recovery yet, download an EXT4 compatible ROM with overclock capabilitied, put it on your sd card and flash it after the EXT4 conversion but before rebooting.
Do you BONSAI?
kennyglass123 said:
Ok, you cannot be on stock ROM because it does not support EXT4 file system. So either you Odin'd in a prerooted modded stock ROM or you haven't booted into Clockwork yet to convert to EXT4 and thus sponging your phone. You also cannot overclock the stock kernel. So if you are on CWM 3.0.0.6 and haven't gone into Clockwork recovery yet, download an EXT4 compatible ROM with overclock capabilitied, put it on your sd card and flash it after the EXT4 conversion but before rebooting.
Do you BONSAI?
Click to expand...
Click to collapse
Light bulb turned on! I was not accurate in what was saying. I am currently running the syndicate rom. I was thinking about odin back to stock, rooting then overclocking before I flash another rom. From reading your post when I root then that is not a stock rom because you have changed the files to ext4, correct?
oldpreowner said:
Light bulb turned on! I was not accurate in what was saying. I am currently running the syndicate rom. I was thinking about odin back to stock, rooting then overclocking before I flash another rom. From reading your post when I root then that is not a stock rom because you have changed the files to ext4, correct?
Click to expand...
Click to collapse
If you followed his video to root with CWM3 and run SRF then you converted to EXT4 when you ran CWM3. If you odin back to stock and root you can not overclock the stock kernel. Depending on what root method you use, would depend on what file system you are on. If you convert to EXT4 you need to have an EXT4 compatible ROM on your SD card to flash or your phone will not work
I get what you are saying, thanks.
Sent from my SPH-D700 using Tapatalk
oldpreowner said:
I get what you are saying, thanks.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
NP keep us updated
GL
However you can root with CWM 2.5.5 and keep RFS and just change your kernel to Genocide or another with overclocking after you return to stock.
Do you BONSAI?
kennyglass123 said:
However you can root with CWM 2.5.5 and keep RFS and just change your kernel to Genocide or another with overclocking after you return to stock.
Do you BONSAI?
Click to expand...
Click to collapse
Guess if we had his "ultimate goal" with his phone was we could of been more direct from the get go
After installing one of the Gingerbread roms (Default [ROM] [CM7] [7/14/11] Trigger Redux ยป Build 13 ) I had to go back to Froyo for Wifi Calling.
But when I flash any Froyo rom using the clockworkmod v4.0.1.0 I get this error:
Amend scripting is no longer supported... Installation aborted.
Do I need a previous version of CWM? Which one? And how to install it?
Any other solution?
Thank you in advance.
you need to odin to jfd first....
bfranklin1986 said:
you need to odin to jfd first....
Click to expand...
Click to collapse
^^^this.
You *MUST* Odin back to jfd before flashing *ANYTHING* Samsung based if coming from anything CM7 based.
Sent from my SGH-T959 using XDA App
Thanks. It worked.
I just Odin'ed back to JFD. When I flash any kb5 froyo rom do I need to flash new radio? or anything else besides the rom itself?
Thank you.
PeterHook said:
Thanks. It worked.
I just Odin'ed back to JFD. When I flash any kb5 froyo rom do I need to flash new radio? or anything else besides the rom itself?
Thank you.
Click to expand...
Click to collapse
no it should have that modem already in it unless it doesnt say and unless u want a custom kernel then no, there are some GB roms with wifi calling, the JVP GB roms are the ones that have it