i have a nandroid of ji6. do i just apply that and flash a ji6 kernal? can someone link me to one if so? if not, can someone explain how to do it? thanks.
I believe you have to ODIN the official JI6 release (you can find it in the dev forum). Then you have to root, install ROM Manager, and nandroid your way back to where you were.
The key is to Odin a Rom, any Rom, that has the JI6 kernel.
Odin JI6 and then nandroid.
Nandroid doesn't install the kernel, so you would end up with a "brick" if you tried to nandroid on a 2.2 rom.
thanks guys! loving obsidian so far, but i think i need the signal strength boost from ji6.
Nope, I was on Obsidian and just flashed straight back to Bionic Fusion through clockworkmod recovery (straight, not through ROM Manager), and then Core kernel on top of that. I'm running perfect apart from slow market downloads (mostly my fault I think--accidentally deleted some system apparently and then restored; downloads work, but fussy)
Sent from my SGH-T959 using XDA App
that's because bionix flashes the kernal along with the rom. nandroid doesn't. that is why i asked if i could just flash the ji6 kernel after restoring my nandroid.
ATTN: Don't give advice if you don't know what you're talking about.
On to the post:
You can feel free to nandroid or flash to/from anything. However, if your Obsidian install is like many other peoples, you probably can't do crap in recovery. In that case, you need to Odin. However, if your recovery does work, just flash the rom and the kernel (or just the rom, if the kernel is included)
OK ill give it a shot if I decide I don't like obsidian. Thanks.
Sent from my SGH-T959 using XDA App
By can't do crap do you mean can't flash or can't access clockwork mod? (I can boot into clockworkmod just fine)
Sent from my SGH-T959 using XDA App
gonintendo said:
that's because bionix flashes the kernal along with the rom. nandroid doesn't. that is why i asked if i could just flash the ji6 kernel after restoring my nandroid.
Click to expand...
Click to collapse
Ah, sorry. I thought the issue was whether you have to ODIN back to stock in order to roll back from Froyo.
For me the safest was to ODIN JFD, then flash JI6.
Related
Hey noob question here. I flashed the viper rom and I don't like it . How do I unflash it, as in make things back to normal.
The obvious answer would be use your backup if you made one. If not you can flash a different rom. If you decide to flash a 2.1 rom you'll need to flash a 2.1 kernel as well. If you want to go back to stock I would just odin back to stock. Instructions here:
http://forum.xda-developers.com/showthread.php?t=773032
except use the file from this post:
http://forum.xda-developers.com/showthread.php?t=794138
I would consider something like the acs dk17 because it's completely stable and it is essentially the same as a 2.1 stock rom but it has the capabilities of 2.2. Going back to 2.1 would (to me) be the same as using a stock dk17 rom like acs, which I'm using right now and loving. Two cents.
odin
Is there only one type of odin because the link you gave me for restoring had a broken odin download link. I see another odin download that's for the acs dk17 and was wondering if it'll be the same.
Yeah you can use the new odin. If for some reason that fails pm me and I'll give you the old version of odin.
Sent from the Fastest Phone in the Galaxy
All i want to do is install a metamorph, and flash a couple things. But i have to go through so much to get these even working. I rooted and installed busybox, but now metamorph says there isnt enough free space in /system. ugh.. and to get CWM working, i have to push 3e recovery so that the update.zip works? wtf dude this is gay.
Im on stock jk6 btw
Odin back to stock ji6 then flash the stock jk6 rom. Everything will work after... I had the same problem. Everything is good now.
Sent from my SGH-T959 using XDA App
roguly said:
All i want to do is install a metamorph, and flash a couple things. But i have to go through so much to get these even working. I rooted and installed busybox, but now metamorph says there isnt enough free space in /system. ugh.. and to get CWM working, i have to push 3e recovery so that the update.zip works? wtf dude this is gay.
Im on stock jk6 btw
Click to expand...
Click to collapse
JK6 is a LEAK, therefore, things haven't been totally updated for it. And since there's no source for 2.2 yet for vibrant, using another recover for it (2e) is pretty hard. If you want an easy way to get root+busybox+3e all in one, flash the deodexed CWM flashable in the dev section (after ODIN'ing to jfd). You can't expect all the previous methods from 2.1 to work as they did with 2.2...
Five0nIt said:
Odin back to stock ji6 then flash the stock jk6 rom. Everything will work after... I had the same problem. Everything is good now.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Five0nIt, that won't work to fix 3e recovery...
geoffcorey said:
Five0nIt, that won't work to fix 3e recovery...
Click to expand...
Click to collapse
My phone was having the exact problems he listed. When i tried to use metamorph it would tell me that there wasn't enough space in the system. What i did was odin back to stock ji6 then flash sombionx's flashable stock jk6 threw cwm. Everything is good now. No problems at all.
JK6 Rom i used
http://forum.xda-developers.com/showthread.php?t=857974
what happen is that i just rooted and added clockworkmod onto my epic and right after i went into clockworkmod to flash a theme and a keyboard at the same time and when i went to reboot it didnt reboot pass the samsung logo.
You probably just need to restore one of your nand backups in cwm
Did you try flashing the theme with a deodexed rom?
Sent from my SPH-D700 using XDA App
Nope, you are not bricked. Find the thread that returns your phone to stock. Follow the directions closely. Once that is done, re-root your phone. It sound like the poster before me was right, you tried to flash a theme on a stock rom that was not deodexed.
so whats a good deodexed rom i can use??
Personally I like the nebula dk28 rom
Sent from my Epic 4g running Nebula Rom
After installing one of the Gingerbread roms (Default [ROM] [CM7] [7/14/11] Trigger Redux ยป Build 13 ) I had to go back to Froyo for Wifi Calling.
But when I flash any Froyo rom using the clockworkmod v4.0.1.0 I get this error:
Amend scripting is no longer supported... Installation aborted.
Do I need a previous version of CWM? Which one? And how to install it?
Any other solution?
Thank you in advance.
you need to odin to jfd first....
bfranklin1986 said:
you need to odin to jfd first....
Click to expand...
Click to collapse
^^^this.
You *MUST* Odin back to jfd before flashing *ANYTHING* Samsung based if coming from anything CM7 based.
Sent from my SGH-T959 using XDA App
Thanks. It worked.
I just Odin'ed back to JFD. When I flash any kb5 froyo rom do I need to flash new radio? or anything else besides the rom itself?
Thank you.
PeterHook said:
Thanks. It worked.
I just Odin'ed back to JFD. When I flash any kb5 froyo rom do I need to flash new radio? or anything else besides the rom itself?
Thank you.
Click to expand...
Click to collapse
no it should have that modem already in it unless it doesnt say and unless u want a custom kernel then no, there are some GB roms with wifi calling, the JVP GB roms are the ones that have it
My wife has had it with her Vibrant running a 2.3.5 CM7 based ROM not having working GPS. I figured I would put her back to a stock but rooted ROM.
Is this possible? I have used ODIN before, so that is not an issue. I am having a hard time finding an original ROM to download.
What are my options?
Thanks in advance!!!
WiKDMoNKY said:
My wife has had it with her Vibrant running a 2.3.5 CM7 based ROM not having working GPS. I figured I would put her back to a stock but rooted ROM.
Is this possible? I have used ODIN before, so that is not an issue. I am having a hard time finding an original ROM to download.
What are my options?
Thanks in advance!!!
Click to expand...
Click to collapse
I was on Simply Honey and I ODIN back to stock (eclair).
I use the "GBBOOT-T959UVJFD.tar" (see link below, file is in 2nd post) and the 512 pit file. Make sure to check Re-Partition only, leave the other boxes UNCHECKED.
http://forum.xda-developers.com/showthread.php?t=1156832
I followed s15274n guide, (link below) to root and install any rom. I used option B to root and update rom. I installed Trigger as I was on this prior to CM7 and found it to be the most stable.
http://rootzwiki.com/showthread.php...-*-tricks-*-ninja-apps-*-everything#post11383
So I cannot just download the stock ROM and ODIN back to it? Because of the GB bootloaders?
eggnoodle said:
I was on Simply Honey and I ODIN back to stock (eclair).
I use the "GBBOOT-T959UVJFD.tar" (see link below, file is in 2nd post) and the 512 pit file. Make sure to check Re-Partition only, leave the other boxes UNCHECKED.
http://forum.xda-developers.com/showthread.php?t=1156832
I followed s15274n guide, (link below) to root and install any rom. I used option B to root and update rom. I installed Trigger as I was on this prior to CM7 and found it to be the most stable.
http://rootzwiki.com/showthread.php...-*-tricks-*-ninja-apps-*-everything#post11383
Click to expand...
Click to collapse
Use this method. It'll clean out any ghosts of old roms, and put you back on jk2 froyo with root and busybox. It should also put you back on froyo bootloader. I do this between every flash now.
Br1cK'd said:
Eugene's Froyo That Does Not Brick (FTDNB)
I have posted about it in several threads, including my own, so I figured I would finally put it in a central location. This is my FTDNB method for starting with a fresh, clean phone, without any ghosts of roms past popping up to cause you issues.
Download this first, and flash through Odin with your standard 512 pit file
http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
Then when it reboots to the recovery screen, pull your battery, reinsert it and boot up to dl mode, and flash the following, with your same pit file, and selecting repartition in Odin this second flash only:
http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=3
The first link there is Eugene's Froyo That Does Not Brick, but it doesnt work that well as a driver. As an eraser its great though! The second link is the Froyo JK2 leak, with fixed recovery and already rooted. If the first one didnt, the second flash will definitely put you back on Froyo bootloaders.
Thats my whole secret to keeping a clean phone and wiping out any ghosts. You can proceed from there in your desired direction (back to ZD or GZ preferrably) in a safe manner. Its always worked for me to clear up any oddness, and literally takes 15 minutes tops once you have the files downloaded.
Click to expand...
Click to collapse
Then if you want rooted stock then flash or odin kb5 froyo found on this thread:
http://forum.xda-developers.com/showthread.php?t=1036193
I would suggest flashing a custom froyo rom like ZenDroid, Trigger 3.2, or Project V though.
Sent from my ZenDroid using XDA Premium App
Woops
10 char
I gave up on that gps on the vibrant just buy her a bluetooth gps receiver. I should have done this long time ago.
Ok, I got it downgraded to 2.1 and then up to 2.2. How do I get the official stock 2.2.1 ROM for it? I have been looking around, but cannot find it for download. What is the best procedure for rooting 2.2?
WiKDMoNKY said:
Ok, I got it downgraded to 2.1 and then up to 2.2. How do I get the official stock 2.2.1 ROM for it? I have been looking around, but cannot find it for download. What is the best procedure for rooting 2.2?
Click to expand...
Click to collapse
I believe the latest official stock for Vibrant is 2.2 kb5. You can root using Z4root on your phone or Super One Click from your computer. Or you can use Rom Manager to put CWM on you're phone and flash the pre-rooted stock kb5 from the thread I posted above.
Sent from my ZenDroid using XDA Premium App